Database Develop

xda - no sound :(

Hi everyone, I have just recently had my screen replaced on my xda IIi which now works fine but unfortunatly now there is no sound? is it possible to dislodge the speaker when replacing the screen or is this something that cant happen easily - any thoughts will be helpfull before I take it back, I dont want to be mugged for a speaker if at all possible, thanks.

re
its possible that the speaker got out of its place when the screen was being put in place..or its not properly connected to the board...if you could risk it..you can jus open it up and check for yourself..it isnt that difficult..ive been doing ti for like a 100times..n my xda2i still works perfect...i dnt think its a big problem and can easily be fixed..just give it a try

re
BOY-C said:
Hi everyone, I have just recently had my screen replaced on my xda IIi which now works fine but unfortunatly now there is no sound? is it possible to dislodge the speaker when replacing the screen or is this something that cant happen easily - any thoughts will be helpfull before I take it back, I dont want to be mugged for a speaker if at all possible, thanks.
Click to expand...
Click to collapse
and btw im not that of an expert on fixing ppc's but its not that difficult..everything is easily replaceable...i had to pay around $250 just to replace the lcd of my pda2k...and later i checked it out myself and it was so easily done..all i hd to do ws purchase one for as little as $150...

thanks for the advice - ill have a tinker

att tilt keyboard problem

Hey guys, i have a huge problem with my tilt, it is driving me crazy. My keyboard is acting crazy. When i press some keys it will give me a double key, like if i press i or o it will write io, and i know that they are close together and that mite be the problem but sometime if i press R it writes ri or ro, its really only with these 3 keys. I was wondering if anyone out there had this problem (funny i had this problem with the phone i had this replaced with the p990i) and how to solve it. i really hope its not a hardware problem cuz i bougth the damn phone from someone on ebay, brand new.
please help, i have the htc rom installed, sleuth 1.0. thanks guys, i appreciate it alot

I had the same problem. It is a bad keyboard membrane. You will need to replace the membrane or send it in for repair. I had att replace me.

great. i dont have att so that means that i will have to sent it to htc right?
damn i never get anything good on ebay (and i keep telling myself that it will be the last time i buy something from ebay). I mean the damn phone was new.
So can i contact htc and send it to them and will they replace it for free? cuz sure att isnt since i have no account with them.

r3awak3n said:
great. i dont have att so that means that i will have to sent it to htc right?
damn i never get anything good on ebay (and i keep telling myself that it will be the last time i buy something from ebay). I mean the damn phone was new.
So can i contact htc and send it to them and will they replace it for free? cuz sure att isnt since i have no account with them.
Click to expand...
Click to collapse
If you bought it BRAND new, sure!! Forget the bull**** on HTC's website about proof of purchase. The Ebay receipt print off is good enough or your cred card statement for the purchase (erase the rest for anything else!!! ). Just as anywhere else, DON'T take no for an answer.

yeah, im not gonna get no for an answer for sure. i paid good money for this. I think i am gonna get my friend to send it to att so i can get a replacement right away, now i gotta flash it back to att crap rom and hope my friend is up to, i heard htc takes its time to get things done and that would mean no phone for 1 month. damn this sucks, thx for the support guys.

r3awak3n said:
yeah, im not gonna get no for an answer for sure. i paid good money for this. I think i am gonna get my friend to send it to att so i can get a replacement right away, now i gotta flash it back to att crap rom and hope my friend is up to, i heard htc takes its time to get things done and that would mean no phone for 1 month. damn this sucks, thx for the support guys.
Click to expand...
Click to collapse
Check this place out first, they deliver anywhere,
http://cnn.cn/shop/8925-tilt-kaiser-c-277_448.html
Found on a 'Bork'?? thread here.

do you by any chance have htc keyboard+keypad installed?
try uninstalling if you have it in there.

seriously? now peoples keyboards are F'ing up? damn.. what is next
I've already gone through so many I've lost count. Frys Electronics is getting tired of me coming into their store every other day with another problem on a new Tilt, lol
First it was the side scroll wheel, it didn't even work
Second was the usb port, it was so tight that when I went to take the usb charger off it, it pulled the usb port out some with it.
Third and most recent was a dead pixel and a slider that closed too far.
Do I just have bad luck? lol

dont have anything installed, just did a hard reset so no progs installed. it looks like its screwed up and how lucky it is exaclty the sam prob as my p990i (which i thought was software problem) but its not.

Spare Parts

Anyone some where I can buy spare parts for the HTC Diamond, exactly I need the Rigid Flex Board (p/n 51H10073-00M).
Thanks in advance

for battery, stylus and covers you can go here:
http://www.dealextreme.com
bye,
davide

MLG said:
Anyone some where I can buy spare parts for the HTC Diamond, exactly I need the Rigid Flex Board (p/n 51H10073-00M).
Thanks in advance
Click to expand...
Click to collapse
try ebay......your find anything on there you know

HTC Service Manual: http://www.mediafire.com/?jnh4f2ndyzz

Thanks suiller but I didn't find the part I need in dealextreme.com.
I try in ebay but for the moment I didn't find,I'm in contact with a vendor from Hong Hong, that it try to find the part.
I ask if someone know if there are e-store or store in Italy that sell spare parts of HTC Diamond.
I attach the picture of the part that I need, so please help me to find it.
Thank you very much

I need that part too.
Has somebody found where to buy that board or how to power on Diamond without Power button (if you disconnect and reconnect the battery)
Please help.

borc said:
I need that part too.
Has somebody found where to buy that board or how to power on Diamond without Power button (if you disconnect and reconnect the battery)
Please help.
Click to expand...
Click to collapse
I assume you managed to find the replacement part, but if not try these guys:
http://www.gsm4world.us/shop/touch-diamond-p3700-flex-cable-flex-board-antenna-p-2486.html
I purchased one from them and delivered no problems at all.

barncourt said:
I assume you managed to find the replacement part, but if not try these guys:
http://www.gsm4world.us/shop/touch-diamond-p3700-flex-cable-flex-board-antenna-p-2486.html
I purchased one from them and delivered no problems at all.
Click to expand...
Click to collapse
Holy crap.. this site is awesome.. thanks man..

I've ruined my device....is there anything that can be done?

Even worse, its a MDA Compact V.
Basically, I got the newton rings issue a few months ago and after reading threads on here, tried the duct tape trick which worked a treat....for about a month.
Then the issue came back of the screen not responding, so I continually used the tape to fix the screen. It got to the point where I had done it that many times, I was having to carry a roll of tape around with me, and the front of the front facia began to lift on the left hand side of the phone each time I did it.
It got to the point where I didnt need the tape anymore, I could just use my fingernail to pull the layers apart which would make the screen respond again.
However, recently I noticed a spec of dust under the screen. I put up with it for a while but last week I decided to try and get it out.
I stupidly lifted the layers apart and blew into the phone. This caused the touchscreen to behave very erratically and did not move the dust.
I was a bit tipsy at the time and actually lifted the whole of the front off the phone (thinking I could clean the screen and stick the front back down) but now the phone will not respond to touch no matter what I do.
I was thinking of trying to replace the front parts myself, but as mentioned its a Compact V not a D2, so the shape of the front of the handset is slightly different and I cannot seem to find anywhere that I can order the front facia.
I've got a lock on the phone, so I cant even flash it if I wanted to sell it as 'broken'
Can anyone think of ANYTHING that could help?
Any advice would be GREATLY appreciated!

You can flash your phone if you just put the Rom on a storage card and update it from there, and new digitizers are just 4 dollars, so just put a new one in ( or I can do it for you if you pay for the costs) I've replaced my digitizer about 3 times now... and im pretty good at it XD

i really hate to say it. but i think its just time to buy a new phone. I know money may be an issue. i dont have the cash to fork out for new phones either. but if this happened to me. i would do my best to back everything up. then just buy a cheap phone untill i saved up . i have an htc pure right now saving up for an evo 4g. I just upgraded my contract so i will have to pay full price for the evo 4g around $500.00 . unless ya can limp this one along . but from what it sounds like is its about time to bury that one ...
devices messing up does suck, im sorry..
Good Luck

Thanks guys.
Is it possible to flash from the SD card when the device is locked?

maxcherry said:
Thanks guys.
Is it possible to flash from the SD card when the device is locked?
Click to expand...
Click to collapse
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.

Mar'Cel said:
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.
Click to expand...
Click to collapse
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.

maxcherry said:
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.
Click to expand...
Click to collapse
I believe if you search on screen replacement threads they have stated where they were purchsed.
Also, you can use Pocket Controller Pro or My Mobiler to access your screen from your PC.

[Q] Can somebody help me with a semi broken power button

Hey guys, good night/morning (or whatever) :silly: ,i'm here because i need help with my phone, months ago i was with the phone under the water, then one/two weeks later my power button got broken, the phone lock and unlock itself so many times,the volume buttons won't work correctly (but they work, u need to press them softly), and the camera button wont work (AT ALL) too... and i have no warranty (because they said there are a red dot in the sim slot), so, i saw the piece on ebay in like 10 bucks,
The question is, can my self disassembly my phone? Do i need a special Glue or something? (I have all the screwers), can one of you guys help me?
I will be pretty apreciatted THANKS :good:
PS: sorry for my bad english :\

jancarlos1597 said:
Hey guys, good night/morning (or whatever) :silly: ,i'm here because i need help with my phone, months ago i was with the phone under the water, then one/two weeks later my power button got broken, the phone lock and unlock itself so many times,the volume buttons won't work correctly (but they work, u need to press them softly), and the camera button wont work (AT ALL) too... and i have no warranty (because they said there are a red dot in the sim slot), so, i saw the piece on ebay in like 10 bucks,
The question is, can my self disassembly my phone? Do i need a special Glue or something? (I have all the screwers), can one of you guys help me?
I will be pretty apreciatted THANKS :good:
PS: sorry for my bad english :\
Click to expand...
Click to collapse
Hello, you can find guides on how to open your z1 on YouTube and Google, however I would not risk it and open it my self

Hmmm, I need to do it myself because repair shops here they do that for like 50 Bucks, and the piece is only 10 bucks, so I'm saving much money, but risking my phone too :/
I'm a 17 years kid with no money haha, not working yet, that's because I didn't send it to the repair shop.

No body? :'(

I sent mine to Sony Service centre here in Singapore. My warranty covered it so it's free (despite having the liquid detector thing red). However it took me 4 and a half weeks for them to repair a freaking power button
Sent from my C6903 using Tapatalk

jancarlos1597 said:
Hmmm, I need to do it myself because repair shops here they do that for like 50 Bucks, and the piece is only 10 bucks, so I'm saving much money, but risking my phone too :/
I'm a 17 years kid with no money haha, not working yet, that's because I didn't send it to the repair shop.
Click to expand...
Click to collapse
Don't worry, I know your troubles, im 14 and i'd repair my phone myself, im kind of like the risk it or always have it broken, i've taken computers apart before and back together but different from a phone since there's tinier screws more tiny parts and risk of breaking tiny little things lol, I should stop there since im probably scaring you, I would fix my z1 myself but then i wouldn't put it back in water because i wouldn't be sure if my phone lost it's tight seal ability or not, but first i'd watch lots of take apart videos for the z1, also have a computer next to you so you can review the steps, one thing i know for sure is you need a heat gun of some sort to take the back off, then from there more taking apart