Hi. I have a very strange problem with my XSP running Vanir. I've been using Vanir for over 2 months now.
The problem is that the phone wouldn't charge, at all. When it was powered on, plugging in the cable through either wall socket/pc would do nothing. PC didn't even recognize the phone.
Currently, the battery is completely drained and there's no way to power it on. When I connect the phone to wall socket, the LED first turns green for about 5 seconds. Then, Sony logo is flashed with LED being red, for 5 seconds again. Then, the offline charging screen would appear, and go off within a couple of seconds. When I press the power button, the offline charging screen flashes and goes off. LED isn't blinking or lit up.
If I connect the phone to PC, the LED glows red constantly. That's it, no charging.
The problem is not with the cable as I tried 3 different ones.
Someone help, please.
May be the micro usb socket is damaged.
http://forum.xda-developers.com/xperia-sp/help/phone-wont-charge-t2846801
try it
Related
I have a C6003 running 4.4 Stock with an unlocked BL and am rooted. The phone screen is cracked at the top third (not smashed, just 2 long cracks) and that third of the screen does not receive touch input, but still displays. Anyway, the phone is currently out of battery, when I try to power it on, I get either a flash of the Sony logo then 3 blinks of the red LED or just straight to the LED, which is normal. I plug it in to charge (tried several USB cable / wall plug combos, up to 2.1A etc.) and the red LED glows solid as it should. Even hours later it still will not power on and gives me the blinking LEDs...It was charging for a total of at least 7 hours and is still not turning on. I have had several battery issues recently but this is the most serious. I am sending my phone in for repair under insurance for the screen but need to back it up first! Any help is appreciated.
EDIT: Quick edit to add the fact that this same issue occurred yesterday as well but it eventually powered on with 15% battery, I used it and it would not charge and so that is why it is run down again. Even when powered on it would not charge, the LED did light and it charged for 5 seconds each time the cable was inserted, but after the 5 the LED would stop and it would stop charging. The phone knew the cable was there though as when it was inserted Stamina mode was disabled (as it should) even though it was not charging?
Roscobigfoot said:
I have a C6003 running 4.4 Stock with an unlocked BL and am rooted. The phone screen is cracked at the top third (not smashed, just 2 long cracks) and that third of the screen does not receive touch input, but still displays. Anyway, the phone is currently out of battery, when I try to power it on, I get either a flash of the Sony logo then 3 blinks of the red LED or just straight to the LED, which is normal. I plug it in to charge (tried several USB cable / wall plug combos, up to 2.1A etc.) and the red LED glows solid as it should. Even hours later it still will not power on and gives me the blinking LEDs...It was charging for a total of at least 7 hours and is still not turning on. I have had several battery issues recently but this is the most serious. I am sending my phone in for repair under insurance for the screen but need to back it up first! Any help is appreciated.
EDIT: Quick edit to add the fact that this same issue occurred yesterday as well but it eventually powered on with 15% battery, I used it and it would not charge and so that is why it is run down again. Even when powered on it would not charge, the LED did light and it charged for 5 seconds each time the cable was inserted, but after the 5 the LED would stop and it would stop charging. The phone knew the cable was there though as when it was inserted Stamina mode was disabled (as it should) even though it was not charging?
Click to expand...
Click to collapse
Check this thread out, it might just resolve your issue credits to @AhmedZadjali
Hi, first of all sorry for my bad english.
I just bought Motorola Moto G 2 and i tried to start it - white LED lights and the device isn't starting, i thought that its normal that the battery isnt charged because its new phone. I plugged charger and it showed me that battery is about 50% charged, and when the charger is plugged phone starts and works normally, when i unplug the charger phone still works (havent checked for longer time but didnt immediatly turn off, just worked), but when i turn phone off and try to turn it on again LED lights like its discharged.
I tried charging to 100% and unplugging, doing reset but still the same. Only works when starting with charger plugged. What should I do? Is there any solution?
PaulPixelman said:
i tried to start it - white LED lights and the device isn't starting
Click to expand...
Click to collapse
If the led is lighting up for just a moment, you didn't hold the power button long enough. If device is not starting up even after pressing power 5-10 sec.... customer service
So one morning I woke up and saw phone keeps rebooting(bootloop).I had breakfast then came back to pick it up,and i connected it to charger and phone was totaly dead.I tryed other cables but still same result.Only way to power it on is when I use original cable and connect it to charger/pc.Then red led turns on and display showing low battery,and led keeps blinking.Sometimes it can boot into system and works for few minutes and shuts off cuz 0%.I changed battery but everything is same,I also can go into TWRP.
**I TRIED EDL MODE/two pins or whatever and my PC is not showing Qualcom driver or anything else in relation with phone
i had same issue before, i simply just buy new cable and it working again!!
PS. Before i buy new cable i already had 3 type-c cable bot non of them working
I had the same issue an hour ago. My MI5 had ~25% charge left when I saw it shutting off, maybe I unknowingly did it. Then I decided to leave the phone in TWRP at night but in the morning it appeared to be dead. The red LED blinked only when I pressed the buttons, no turning on, fastboot or booting into TWRP was possible. When I plugged it into the charger an empty battery icon appeared with the red LED blinking continuously. After some time a new animated battery icon appeared, in the still turned off state, but this time showing the exact charge percentage (2%). It went to 3% and I turned it on with the power button.
Should be a faulty battery which needs to be replaced!
Vivitsu said:
I had the same issue an hour ago. My MI5 had ~25% charge left when I saw it shutting off, maybe I unknowingly did it. Then I decided to leave the phone in TWRP at night but in the morning it appeared to be dead. The red LED blinked only when I pressed the buttons, no turning on, fastboot or booting into TWRP was possible. When I plugged it into the charger an empty battery icon appeared with the red LED blinking continuously. After some time a new animated battery icon appeared, in the still turned off state, but this time showing the exact charge percentage (2%). It went to 3% and I turned it on with the power button.
Click to expand...
Click to collapse
Remove back cover plug and replug the battery connector it qill solved (red light of death) if still happend you need to buy new battery
Hello, two weeks ago my phone all of a sudden turned off and I can't turn it back on.
The only reaction I can get from it now is notification light turning on (instead of blinking) when charging. Also, when I use any vol + power combination when charging, the notification light blinks once and then goes back on. No vibration, no nothing. I tried charging it for a whole day with original charger (tried two xiaomi chargers).
I managed to tear down the phone, and plug off a battery from a motherboard. When I plug in a charger, with battery plugged off, the phone reacts exactly the same (no vibration, no screen activity, only notification led).
So my question is: could it be that the battery alone is faulty, or could it be something else? I will highly appreciate any help!
I didn't charged my Sony overnight. And found her dead by morning
While charging - red diode blinks in 1,5s intervals. Nothing more happens. Holding power button doesn't do anything.
I tried connect to computer, but diode blinks same, and computer not detecting new device.
It's not solvable in home, am I right?
What I am worried, it can be something other then battery, right?
Did you find a solution to your problem? If you did please help