Related
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
ahmett75 said:
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
Click to expand...
Click to collapse
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Brainiac.shri said:
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Click to expand...
Click to collapse
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
RealBorg said:
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Click to expand...
Click to collapse
But i'm from belgium and i couldnt find one for belgium. So you live in austria and downloaded the firmware for austria?
Sent from my GT-I9070 using xda app-developers app
ahmett75 said:
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Brainiac.shri said:
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Click to expand...
Click to collapse
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
ahmett75 said:
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
Click to expand...
Click to collapse
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
shut_down said:
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
Click to expand...
Click to collapse
i'm going to give it a try, waiting for the download to finish
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
exchange exprsee
shut_down said:
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Click to expand...
Click to collapse
Search google "samsung download mode" and you should see image of it. When you power your phone with vol.down+home+power you get question do you want to continue. You press volume up to confirm. And after that with your phone connected and file in PDA hit start.
Sent from Galaxy S Advance
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
JBAdvXDA said:
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
Click to expand...
Click to collapse
How much time does this take? Maybe try to redownload firmware file.
shut_down said:
How much time does this take? Maybe try to redownload firmware file.
Click to expand...
Click to collapse
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
JBAdvXDA said:
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
Click to expand...
Click to collapse
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
shut_down said:
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
Click to expand...
Click to collapse
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
JBAdvXDA said:
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
Click to expand...
Click to collapse
Try wiping cache reset in stock recovery and problem solve
I've succesfully upgraded to JB, rooted and flashed kernel.
Any suggestions about ROMS for i9070 ?
Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!
Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.
http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.
what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?
Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !
alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.
Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.
when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.
I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.
ThaiDai, please see my replies, I did as you requested..
Thanks
whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997
shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
You can't flash Philz Touch 6 using odin.
You need to flash PhilZ kernel 5, odin version.
link here:
http://d-h.st/users/philz_touch/?fld_id=16061#files
Hope you can work it out.
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
i had the same problem yesterday.
i solved it by changing usb cable and trying different usb port and using odin 3.09 with stock rom file (jb 4.1.2).
after flash boot into recovery and flash this philz file : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
hope this help you.
cant flash cyanogenmod 11
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
davslove said:
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
Click to expand...
Click to collapse
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
AndroidSlave said:
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
tried upgrading with kies using tools>firmware upgrade and initialisation but it says gt-n7000 does not support initialisaztion
currently i am stuck at empty battery icon with refresh circle and when i try to go into recovery mode i see android icon with blue cirle refreshing for a second and cell reboots to same empty battery icon with a refresh circle
Pleasssssssssssssssse HELP
davslove said:
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
Click to expand...
Click to collapse
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey thx
i wiped data and cache using recovery but stuck at reboot next what?
i can access recovery and download mode both now
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
davslove said:
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
Click to expand...
Click to collapse
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
forest1971 said:
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
Click to expand...
Click to collapse
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
davslove said:
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
Click to expand...
Click to collapse
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
forest1971 said:
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
Click to expand...
Click to collapse
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
davslove said:
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
Click to expand...
Click to collapse
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
forest1971 said:
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
Click to expand...
Click to collapse
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
y is that i cant operate using battery
and when i plugin battery status shows 100%
is this some hardware isuue?
davslove said:
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
Click to expand...
Click to collapse
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Dont mind but any you will suggest will be good
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried installing other 4.1.2 roms like paranodroid utacka but couldnt install phone reboots after opening package > installing package
might be some other isuue?
because i cant charge battery and can operate using plugin how to fix that?
even stock jb rom doesnt fix it please help me invoke your 6 senses get me a proper fix?
Please aomeone help please
I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
I have installed the TWRP recovery. When I try to reboot it says "no OS installed". There is no way to install from TWRP a new OS ?
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.
Lele123 said:
I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.
Click to expand...
Click to collapse
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.
shut_down said:
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.
Click to expand...
Click to collapse
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment
Lele123 said:
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment
Click to expand...
Click to collapse
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.
shut_down said:
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.
Click to expand...
Click to collapse
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes
Lele123 said:
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes
Click to expand...
Click to collapse
Try other version of Odin too. 3.0.7 for example.
shut_down said:
Try other version of Odin too. 3.0.7 for example.
Click to expand...
Click to collapse
I did it with LQL, didn't work...
Lele123 said:
I did it with LQL, didn't work...
Click to expand...
Click to collapse
Maybe your phone have some hardware issue, you told that it was rebooting every 15 seconds. Better go to some service centre.
Hello,
I tried to Update my Samsung S3 LTE to the I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3 4.4.4 Kitkat stock firmware. My phone had JB 4.3 installed with VD2 branding.
I was using Odin 3.07. But after the flashing procedure my device is stuck at the boot animation screen. I can still access download and recovery mode.
Here is what I tried chronologically (with no success)
Wiped cache and data
Flashed the 4.4.4 stock firmware again
Installed CWMOD and wiped cache and data, Dalvik cache
Installed Omni 4.4.4 with gapps-kk-20140606-signed and later CM11 with the same result stucking at boot animation.
The device isn't rooted IMEI is saved according to this guideline http://forum.xda-developers.com/showthread.php?t=1946915. Unfortunately there is no recovery of the 4.3 rom available, however I think a downgrade is no longer possible because of the new bootloader? Odin givs me SW rev check failed when trying that.
I would really appreciate if somebody has any guess waht else I could do to resolve that.
Thanks,
Jon
jon192694 said:
Hello,
I tried to Update my Samsung S3 LTE to the I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3 4.4.4 Kitkat stock firmware. My phone had JB 4.3 installed with VD2 branding.
I was using Odin 3.07. But after the flashing procedure my device is stuck at the boot animation screen. I can still access download and recovery mode.
Here is what I tried chronologically (with no success)
Wiped cache and data
Flashed the 4.4.4 stock firmware again
Installed CWMOD and wiped cache and data, Dalvik cache
Installed Omni 4.4.4 with gapps-kk-20140606-signed and later CM11 with the same result stucking at boot animation.
The device isn't rooted IMEI is saved according to this guideline http://forum.xda-developers.com/showthread.php?t=1946915. Unfortunately there is no recovery of the 4.3 rom available, however I think a downgrade is no longer possible because of the new bootloader? Odin givs me SW rev check failed when trying that.
I would really appreciate if somebody has any guess waht else I could do to resolve that.
Thanks,
Jon
Click to expand...
Click to collapse
Firstly I would recommend to download another rom available to our terminals-the XEO from here:http://samsung-updates.com/device/?id=GT-I9305 This is a 4.4.4 firmware for I9305-Poland ,flash through Odin and see what happens.
viktorak said:
Firstly I would recommend to download another rom available to our terminals-the XEO from here:samsung-updates.com/device/?id=GT-I9305 This is a 4.4.4 firmware for I9305-Poland ,flash through Odin and see what happens.
Click to expand...
Click to collapse
Thanks for your answer, I flashed the Polish version but no change it still keeps stuck at the boot logo animation. Any further tips?
jon192694 said:
Thanks for your answer, I flashed the Polish version but no change it still keeps stuck at the boot logo animation. Any further tips?
Click to expand...
Click to collapse
You said you have CWMRecovery installed?Now you could flash thru recovery a custom Rom from this thread:http://www.htcmania.com/showthread.php?t=738977
You try whith 4.1.2 firmware pre-rooted,this is a modificated firmware containing the Knox bootloader.Theoretically there should be no problem.The phone should boot.
Then we'll see.
viktorak said:
You said you have CWMRecovery installed?Now you could flash thru recovery a custom Rom from this thread:htcmania.com/showthread.php?t=738977
You try whith 4.1.2 firmware pre-rooted,this is a modificated firmware containing the Knox bootloader.Theoretically there should be no problem.The phone should boot.
Then we'll see.
Click to expand...
Click to collapse
Thank very much you, that brang my phone back to life! I had to use twrp recovery, cwm wasn't supporting the zip.
What is different with this packages? I tried to load omni 4.4.4 again but it is stuck again at boot animation. Is Kitkat also available as Zip package for recovery like the packages you linked? In the thread it only goes up to 4.3.
jon192694 said:
Thank very much you, that brang my phone back to life! I had to use twrp recovery, cwm wasn't supporting the zip.
What is different with this packages? I tried to load omni 4.4.4 again but it is stuck again at boot animation. Is Kitkat also available as Zip package for recovery like the packages you linked? In the thread it only goes up to 4.3.
Click to expand...
Click to collapse
Hi,mate,this is a kind of downgrade,but not exactly,becuse contain Knox BL/ bootloader/.
Wait wait you must go back to 4.1.2 version.Then if you want- you can flash back 4.4.4 downloaded from the official website of Samsung.
Use Odin ,but don`t forget to kill all Kies process before flashing.
viktorak said:
Hi,mate,this is a kind of downgrade,but not exactly,becuse contain Knox BL/ bootloader/.
Wait wait you must go back to 4.1.2 version.Then if you want- you can flash back 4.4.4 downloaded from the official website of Samsung.
Use Odin ,but don`t forget to kill all Kies process before flashing.
Click to expand...
Click to collapse
Unfortunately that's not working. when flashing 4.4.4 through Odin I have the same result as before. Only the 4.1.2 from your link is working
Well,let.'s trying to flash first a 4.3 Stock rom thru Odin.Try using Odin 3.09 attached here.
viktorak said:
Well,let.'s trying to flash first a 4.3 Stock rom thru Odin.Try using Odin 3.09 attached here.
Click to expand...
Click to collapse
Unfortunately that's not working, I think because of the new bootloader. See Odin log below:
Code:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXUEMKC_I9305DBTEMJ4_I9305XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022> FAIL!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN on phone says: SW REV. CHECK FAIL. DEVICE:3. BINARY:2
Well, let's trying wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4.
viktorak said:
Well, let's trying wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4.
Click to expand...
Click to collapse
That brings me to the same fault as before - stuck at boot animation. Odin runs without error:
Code:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022> tz.img
<ID:0/022> boot.img
<ID:0/022> recovery.img
<ID:0/022> system.img
<ID:0/022> cache.img
<ID:0/022> hidden.img
<ID:0/022> modem.bin
<ID:0/022> RQT_CLOSE !!
<ID:0/022> RES OK !!
<ID:0/022> Removed!!
<ID:0/022> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Now enter recovery mode and make wipe cache, Dalvik and data again and reboot.
viktorak said:
Now enter recovery mode and make wipe cache, Dalvik and data again and reboot.
Click to expand...
Click to collapse
Already did that but no change
Now you have a Rom flashed .The problem is that can't boot. In this momment I'm not at home.I can be online later.
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
After sucsessful flashed Rom you must be directly enter to Recovery to make all wipes and finaly reboot...
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
viktorak said:
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
Click to expand...
Click to collapse
I will try that now - the only problem is that I can't wipe dalvic after flashing because the stock recovery tool isn't offering this option.
viktorak said:
Well,jon192694,let`s trying this.Repeat this step: wipes Dalvic, cache and Factory reset,then flashing a Stock 4.4.4,in Odin uncheck Auto reboot,and when the installation is sucsessfuly terminated:<OSM> All threads completed. (succeed 1 / failed 0),remove the battery/30sec/,enter in recovery and wipe Dalvic cache,cache and data,reboot.
Click to expand...
Click to collapse
There is no change still stuck on boot animation. I did it as you sugested the only thing I didn't do was wiping dalvic. I later installed cusrom recovery to repeat it including wiping dalvic but no change
I did some more testing, omni 4.4.4 is not working neither the most recent cm 11 nightly. What is working is cm 10.1.
So I have the impression my phone will only work with Android 2.1.2 systems?
Would usage of Mobile Odin make any difference?
jon192694 said:
I did some more testing, omni 4.4.4 is not working neither the most recent cm 11 nightly. What is working is cm 10.1.
So I have the impression my phone will only work with Android 2.1.2 systems?
Would usage of Mobile Odin make any difference?
Click to expand...
Click to collapse
Hi,jon192694.Yes, you have to try things, as long as they are properly made.Try to flash 4.4.4 using Odin mobile.Here you have the thread on XDA- http://forum.xda-developers.com/showthread.php?t=1347899.
Has nobody experienced anything similar? I tink I now almost tried everything possible. Would be strange if I am the only one with this effect.
I am thinking about staying at the modified 4.1.2 or send it in to repair service...