hi i am getting this update error please help screen shot is attached
hmm
OTA update via phone gets me error too :/ ,,, download and install Nokia care suite 5 than run Nokia software recovery tool ,, it will detect your phone and it will download full rom than it will flash ur device perfectly
Related
Hi, today i wanted to update my firmware via PC Suite it stucks on 4% and firmware update i cant backup firmware via support tool or flash tool cause it cant go into download mode... i press volume+ button then plug usb and its going into firmware update mode... now pc suite even cant connect with my phone (i have green COM12 on firmware update screen so its ok i think). What can i do now when cant even go into download mode ?
Please help me
Hello ned help..
rm-1030 flashing rom 2.1.0.12 complete Done
i have two version
RM1013_059V788_2.1.0.12 and
RM1013_059V786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059V78 always stuck at rm1013_2.1.0.13_user_NON-HLOS.bin
and shown error dialog "failed using firehouse protocol"
need help..
ive try to redownload ROM.. but keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
maybe the firmware you downloaded is corrupted.. where did you downloaded your firmware files? I use navifirm+ but yesterday I'm trying to redownload a rom but navifirm+ seems to be not working any more..
thaks for replay,
iv downloaded from Package Majnager .. and from this seidea.com/tag/rm-1013-2-1-0-13/
its still blank screen and just detect "emerency connecivity
first download nokia-x2-tools.v.1.2.en.exe, from the tool install drivers.. then go to your "C:\ProgramData\Nokia\Packages\Products\RM-XXX" and delete all files or move it somewhere if you don't want to delete.. and replace everything with the files that you downloaded.. and run "Lunch Nokia Care Suite" as administrator.. and flash your firmware..
thaks...
I thinks its hardware problem.. coz i have 5 different firmware and already used maximal method
change folder.. remove.. redownload.. and anythink
and my phone cant detect fastboot or recovery
btw thaks
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
I have exactly same problem havent found solution yet.
I have same problem too
arisjb said:
hello ned help..
Rm-1030 flashing rom 2.1.0.12 complete done
i have two version
rm1013_059v788_2.1.0.12 and
rm1013_059v786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059v78 always stuck at rm1013_2.1.0.13_user_non-hlos.bin
and shown error dialog "failed using firehouse protocol"
need help..
Ive try to redownload rom.. But keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
Click to expand...
Click to collapse
Remove battery from device atleast 1min
Insert battery
Start device in bootloop and if not start only connect to PC
Start Nokia care suite >product software > open product> select device and flash
jepr0x1011 said:
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
Click to expand...
Click to collapse
My Nokia X2 had also give completely dead. I tried to Flash stock ROM in it via Nokia care suite and which I've even done previously however this time my phone had gone completely blank and does not even go to recovery mode. It has gone completely unresponsive. Please help me on this.
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
hi
initially i flashed A7020a48_LL_S125_160419_ROW successfully but after boot software update was not working giving error no network even when wifi was connected and working fine, so i decided to flash android 6.0 directly with this file A7020a48_S259_160721_ROW but failed, i tried SP Flash tool ver. 5.1548, 5.155 & 5.17 but no success and now i cant even flash S125_ROW. the device is dead i guess, only red light when connect usb but sp flash not detect my phone.
can anyone suggest a solution?
hello guys , i tried to flash the firmware on a Alcatel 4047F using SP Flash Tool but it gives me this error "S_AUTH_HANDLE_IS_NOT_READY" .
i have checked already the program errors and solutions for them and the problem is that to solve it i will need a Auth or DA file for the phone and i didnt find it anywhere "You'll need an Auth (*.auth) or custom Download Agent (DA) file for the device to proceed with SP flash tool" .
If someone could share the files to fix this i would really apreciate it
every firmware tried gives that error , which didnt happen before
now the phone doesnt turn on even to recovery mode , if it is connected to pc i hear the sound of the usb but the phone isnt shown on pc and looks like it keeps rebooting because i keep listening to the sound all the time