A friend of mine has this old fella and he asked me to try to revive it. He reported logo boot loop.
Tried flashing stock firmware for adequate provider with Odin, but nothing helped.
Later I found Brood's tutorial and complete RAR with Odin, Aries and ROM image, but that doesn't help either.
Odin reports <1> big partition size!!, however it seems to complete everything (see: complete flashing log). Also, I am unable to reach recovery mode. Tried installing CWM, but I cannot reach it (volUP+Power). I have tried both with and without Protect OPS option.
The good thing is that I can still reach download mode, but whatever I upload, I'm stuck with the same.
Here's the complete Odin log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> partition.bin download..
<1> 1/11 Finished.
<1> dbl.mbn download..
<1> 2/11 Finished.
<1> osbl.mbn download..
<1> 3/11 Finished.
<1> amss.mbn download..
<1> 4/11 Finished.
<1> EMMCBOOT.MBN download..
<1> 5/11 Finished.
<1> adsp.mbn download..
<1> 6/11 Finished.
<1> boot.img download..
<1> 7/11 Finished.
<1> system.img.ext4 download..
<1> 8/11 Finished.
<1> cache.img.ext4 download..
<1> 9/11 Finished.
<1> recovery.img download..
<1> 10/11 Finished.
<1> preload.img.ext4 download..
<1> 11/11 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Any help would be appreciated.
Related
Hey Guys, I browsed through the forums and I need some help.
The problem
Today when I woke up, my phone was flashing on and off. It goes from black to white and back to black in 1~2 seconds.
I took the battery off and tried to restart it but it just flashes on and off.
I'm not sure to how that happen, I left wifi on so it probably downloaded and auto installed an update, who knows???
Before it happens, I had flashed it to "2.3.4 S5830DDKQ5", and had unlocked the phone so that I could make phone calls with my local sim card.
I had followed this instructions:
http://androidflip.com/android-234-gingerbread-update-samsung-galaxy-ace-installing-guide/
It was working for a few weeks then today, it happened.
Power =Does not work (flashes black and white)
Home button key+ power =DOES NOT WORK (flashes black and white)
Home button key + volume up + power = Works (But what it is for?)
Home button key +volume down+ power = Works
Home button key + volume down + volume up + power = Works!?
Then I had followed a few of the following links to try to revive the phone :
http://forum.xda-developers.com/showthread.php?t=1034145
http://forum.xda-developers.com/showthread.php?t=1071970
It is not working!
I tried to reflash it using other firmwares, does not work.
Example of the log dump.
************************************
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
************************
Firmwares that I have retried using ODIN and Coopers:
SAMSUNG_GALAXY_ACE_S5830_XWKS2_2.3.5
2.3.4 S5830DDKQ5 ( I was using this when it broke down)
S5830XWKB7
S5830XXKC1
Extra Information..
ODIN is Version 4.38, did run as administrator
Windows 7 x64
What makes it worse is that I got the phone from overseas, so I might need to try extra hard when I bring it into the official samsung phone repair center. :/
calvintps said:
Hey Guys, I browsed through the forums and I need some help.
The problem
Today when I woke up, my phone was flashing on and off. It goes from black to white and back to black in 1~2 seconds.
I took the battery off and tried to restart it but it just flashes on and off.
I'm not sure to how that happen, I left wifi on so it probably downloaded and auto installed an update, who knows???
Before it happens, I had flashed it to "2.3.4 S5830DDKQ5", and had unlocked the phone so that I could make phone calls with my local sim card.
I had followed this instructions:
http://androidflip.com/android-234-gingerbread-update-samsung-galaxy-ace-installing-guide/
It was working for a few weeks then today, it happened.
Power =Does not work (flashes black and white)
Home button key+ power =DOES NOT WORK (flashes black and white)
Home button key + volume up + power = Works (But what it is for?)
Home button key +volume down+ power = Works
Home button key + volume down + volume up + power = Works!?
Then I had followed a few of the following links to try to revive the phone :
http://forum.xda-developers.com/showthread.php?t=1034145
http://forum.xda-developers.com/showthread.php?t=1071970
It is not working!
I tried to reflash it using other firmwares, does not work.
Example of the log dump.
************************************
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
************************
Firmwares that I have retried using ODIN and Coopers:
SAMSUNG_GALAXY_ACE_S5830_XWKS2_2.3.5
2.3.4 S5830DDKQ5 ( I was using this when it broke down)
S5830XWKB7
S5830XXKC1
Extra Information..
ODIN is Version 4.38, did run as administrator
Windows 7 x64
What makes it worse is that I got the phone from overseas, so I might need to try extra hard when I bring it into the official samsung phone repair center. :/
Click to expand...
Click to collapse
try other gingerbread fucntions
download mode for odin
is
home vol down power
this works as you said in a bove
SGSII styled rom
for galaxy ace
made by Robinandroid
Try flashing DXKPB
Herpderp Adreno + Tegra.
The download mode works (volume down + center button + power button) , but i tried to flash with odin to other firmwares, no difference.
EmoBoi, thanks for the quick response! Too bad the DXKPB didn't work.
I got it from :
http:
//hotfile.com/dl/128450492/8bec04d/S5830DXKPB.rar.html[/url]
the password is samfirmware.com , so i think it should be the correct one?
calvintps said:
The download mode works (volume down + center button + power button) , but i tried to flash with odin to other firmwares, no difference.
EmoBoi, thanks for the quick response! Too bad the DXKPB didn't work.
I got it from :
http:
//hotfile.com/dl/128450492/8bec04d/S5830DXKPB.rar.html[/url]
the password is samfirmware.com , so i think it should be the correct one?
Click to expand...
Click to collapse
if you try DXKPB didn't work, suggest to flash with XXKPH Custom CodeROM based
Download links:
http://www.mediafire.com/?6l24sqlx348323f
http://www.4shared.com/file/FlodBNrS/buildcoderom.html
http://www.multiupload.com/38SNOR86ZH
hope this work
"...if you try DXKPB didn't work, suggest to flash with XXKPH Custom CodeROM based..""
Ok , I had reflash to DXKPB, and then reflash again with XXKPH Custom CodeROM based.
I got the file from the media fire link, and followed instructions from
http://forum.xda-developers.com/archive/index.php/t-1198116.html
Still does not work. D:
Ahhhh.... I think the cause of my phone due to :
Galaxy_Ace_Unlock.apk!!
Browsing this thread which is related now:
http://forum.xda-developers.com/showthread.php?t=1113088&page=2
calvintps said:
Hey Guys, I browsed through the forums and I need some help.
The problem
Today when I woke up, my phone was flashing on and off. It goes from black to white and back to black in 1~2 seconds.
I took the battery off and tried to restart it but it just flashes on and off.
I'm not sure to how that happen, I left wifi on so it probably downloaded and auto installed an update, who knows???
Before it happens, I had flashed it to "2.3.4 S5830DDKQ5", and had unlocked the phone so that I could make phone calls with my local sim card.
I had followed this instructions:
http://androidflip.com/android-234-gingerbread-update-samsung-galaxy-ace-installing-guide/
It was working for a few weeks then today, it happened.
Power =Does not work (flashes black and white)
Home button key+ power =DOES NOT WORK (flashes black and white)
Home button key + volume up + power = Works (But what it is for?)
Home button key +volume down+ power = Works
Home button key + volume down + volume up + power = Works!?
Then I had followed a few of the following links to try to revive the phone :
http://forum.xda-developers.com/showthread.php?t=1034145
http://forum.xda-developers.com/showthread.php?t=1071970
It is not working!
I tried to reflash it using other firmwares, does not work.
Example of the log dump.
************************************
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
************************
Firmwares that I have retried using ODIN and Coopers:
SAMSUNG_GALAXY_ACE_S5830_XWKS2_2.3.5
2.3.4 S5830DDKQ5 ( I was using this when it broke down)
S5830XWKB7
S5830XXKC1
Extra Information..
ODIN is Version 4.38, did run as administrator
Windows 7 x64
What makes it worse is that I got the phone from overseas, so I might need to try extra hard when I bring it into the official samsung phone repair center. :/
Click to expand...
Click to collapse
I got same problem. I tried to flash/reflash with so many firmware as suggested here but none of them works for me. Is there any suggestion from you guys?...
Thanks in advance...
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/7 Finished.
<1> adsp.mbn download..
<1> 2/7 Finished.
<1> boot.img download..
<1> 3/7 Finished.
<1> system.img.ext4 download..
what do i do i get waiting over 100+ mins in odin when flashing broodrom rc4 for my splus i was using rc9 i didnt do clear partition but did dalvik cache help me recover form black screen of death
heey i have the same problem, have you solved it already?
Try another cable. It usually solve problem. Recommend 30cm Nokia geinue cable
Gửi từ GT-I9001 của tôi bằng cách sử dụng Tapatalk 2
snowboardfreek said:
heey i have the same problem, have you solved it already?
Click to expand...
Click to collapse
i just flashed the feamod recovery and restored my backup man try the same if u dont have a backup get an sd card and flash a rom from recovery
Hi, i have a problem. My phone wont mount everything. I mean i can't flash firmware via Odin or flash custom rom via CWM. I dont know why. I go to CWM>Mounts and storage, and i press mount /data then my phone says "Error mounting /data" ! This problem occurs in all mounts(i mean data,system,sdcard,sd-ext). I hope that somebody understand me.
Also happened to me. Flash stock, then CWM and our should work. I never figured out the reason why it happened, but it's fixed by this.
Sent from my GT-S5570 using xda premium
I tried, but this dont work. I should do that again.
Dont work. Maybe log from odin will help.
Here's log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
Try diffrent stock rom and check your gg communicator ;p
I try 3 stock roms and it still dont work.
Try a 4 package 2.2, then flash one package 2.3, then CWM. Finding a 4 package froyo isn't easy, I found it on a random Russian forum.
Sent from my GT-S5570 using xda premium
I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium
hsay said:
I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Thank you so much ! You solved my problem. My phone works fine now. I just only flashed four package.
hsay said:
I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Thanks man. I had that problem too. Wohoo solved.
Hello.I want to install CWM but after this Odin get stuck (>7 minutes) and i disconnect from the PC. After this, when i open this phone, show me a photo that means soft brick(i check some threads on this forum). I try to install aries with recovery and aries with stock ROM and Odin stay a lot of minutes and don't make anything.
When i install aries with stock rom(download from sam for romania carriers) show me this:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
Can I solve this problem?
rxgamer said:
<1> big partition size!! <1> amss.mbn download..Can I solve this problem?
Click to expand...
Click to collapse
Look in My Android Solutions (link below ) concerning i9001 amss.mbn download problem for solution
Check this out! Links to useful Guides and " Banned " Documentaries
Solve. Thank you.
hello i have a samsung galaxy exhibit 4g from t-mobile, my phone turns on but it only start in samsung galaxy exhibit 4g exclusive from t-mobile logo, and thats all, it restarts, i dont have root and neither recovery mode, so can you help please? can i install the original rom with odin? helpe me please, thanks for your time
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
i try with odin multidownloader and doesnt work
kira99 said:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
i try with odin multidownloader and doesnt work
Click to expand...
Click to collapse
try using odin from here 3rd post. should work as it has for me everytime