OTG + charging - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

hello everyone,
I have a note n7000 and i want to put it on my car, and i want to have otg, to plug usb flash memory, and i want to charge the phone in the same time. It's that possible?
I bought a otg + charging y usb from amazon france ( i don't know if i can put the link here). And it's not working, than i tried to make one like this http://forum.xda-developers.com/nexus-7/help/how-to-usb-otg-charging-t2852655. But nothing.
Thanks to helping me.
Sorry for my bad English.

Related

How to Enable usb - on the go?

please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave

[Q] Usb Cable

Hey guys, I wanted to know if I can use another "universal" usb cable for transfer files to my note ( actually I know that is possible, I have already do it ), but I want to know if its safe (since its not the original).
Becouse its kinda annoying have to taking every day the usb cable from the charger to my computer to transfer files.
Thanks!
yes you can do it .
I ordered a bunch from ebay, but even the nice long cable that arrived with my Kindle works great.
tyraelasd said:
Hey guys, I wanted to know if I can use another "universal" usb cable for transfer files to my note ( actually I know that is possible, I have already do it ), but I want to know if its safe (since its not the original).
Becouse its kinda annoying have to taking every day the usb cable from the charger to my computer to transfer files.
Thanks!
Click to expand...
Click to collapse
Make sure the cable your ordering supports both DATA and POWER. I bought a couple of ebay before and it was only a power cable where it will only charge the Note but does not recognize the device

[Q] Xperia V: usb otg while charging with dock pins

Hi, before I start, yes I've seen y cables and moded usb hubs but,
I need to know before I vandalize my charging dock... If I have a charger connected to the pins on the outside of the phone, would it interfere with the usb otg? Has anyone tried this before?
Long story, I need to mount my phone and use it as a dashcam, I have 2 apps for this(one for road use, recording to sd card, don't need otg, short trips that gets deleted after a day or so) the other(for off road use, usually recording for hours at a time, so this will go to usb storage, but recording several hours does get power hungry) and therefore I need a charging dock with access to usb otg and the camera. Can it be done?
Another problem with this phone is the hdmi that also uses the same port, but I'll keep that till later.
Thanks in advance for any advice.
P.s. Accessories are hard to find for this phone where I live(the shops only keep for Samsung) so I'll build mostly myself.

[Q] I9305 Usb host mode and charging at the same time

Hello!
Today I (Finally) received my USB OTG Y cable! I have the Samsung Galaxy S3 4G (I9305) and i bought the cable because the ebay site said it was for s3. I was really happy when i got it and plugged my usb memory stick into it. It all worked good. Then I plugged in the charger (to the female micro usb) and it didnt start charging. I wasn't happy anymore. Then i started to researh a little. I found out that my phone doesnt support USB host mode and charging at the same time ( ). So im just asking, is there a way to make my phone charge when i use the OTG cable without any hardware modifying? Can I just likes install a custom kernel that supports OTg charging? Or just make my phone think its docced when i use that cable (I thought that may work)?
Btw im running android 4.4.4 stock rom and stock kernel. Thanks for any help.
And here is a picture of the cable. Down there ⬇

Htc desire 626s usb otg capabilities?

Hi, i recently rooted my phone and used the Post in the forums to do so, here is a pic of the kernal and all that. My question is why can i still not use my otg? Downloaded host diag, checker, helper, nothing is working. Can someone please tell me where to go from here? There are spaces so i could post the url.
http ://i63. tinypic. com/24ys9z5. jpg
seems kernel doesn't have the driver for it also the phones board doesn't supply power to the cable so you would need a y cable to supply power. Im still waiting for HTC to post the kernel source so I can make the modifications I need to it. It's been almost a month since they said they elevated my request for the source to their dev team if its not posted in a week I'm going to write them again.
There is a app I saw the other day called "stick" something that enabled phones with no otg support to use one. It was in a YouTube video about must have root apps , sorry I couldn't help more than this. I did order an otg cable after watching it.
Ok, ill look to see if it works
Nope. Still won't work. Power must be supplied for it to be registered to the phone.
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Gnnex said:
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Click to expand...
Click to collapse
I had no luck with a powered Y-cable either. I got OTG to work with my XT894 only after connecting a powered USB hub to my OTG cable, then connecting a USB flash drive to the hub.

Categories

Resources