Related
[Tutorial] Null_/FreeFalling Theme/Dr Who Sound,Boot Theme / & More (Updated Jan 16)
[Tutorial] Null_ TWRP / Null_ ROM / FreeFalling Theme / Dr Who Sound,Boot Theme / & More
Created by almulder1092 @ xda-developers.com
"Work In Progress, Need to add in Screenshots, And possibly more tutorials - Enjoy"
No Support Via PM - Please stop with the PM. They will now be ignored!
Well after creating my last tutorial, much has changed, wonderful new things have come about. So I thought it was time to create a new tutorial covering the new things.
So after now I have read 1000+ of pages and posts, hopeful this will help cut down on your searches. BUT read the whole tutorial before you ask questions. There are fare to many people that ask questions that are usually covered in the OP (Original Post) of threads. Please be respectful of the Developers Time and not ask dumb questions that have the answer posted.
Things you will need before you continue reading:
Ability to understand what you read
Time and Patients
How to use Google Search
Time and Patients
A brain
Ability be patient with all of us.
Give Credit where credit is due
Lastly Understand that Nobody is responsible for what you do to your gear, except you. And using the guide below will void your warranty
Now that is covered lets continue.
First get and install Wondershare MobileGo for Andoid this will make life easier. (Google it - Link removed by the request of xda)
(If your to cheap to get this great software, why did you pay so much for a watch?)
Alternative way to download apk's from Google Play without Wondershare Download Here
(Note: I do not plan on doing a tutorial using this method as they show one on the site) (Thanks to fOmey for the info)
Alternative way to get apks to your Gear without Wondershare Tutorial Here
This tutorial will take you from a stock rom to the null_ rom with a theme installed and other options.
In this tutorial we will cover the following:
(Clicking on the Titles will let you jump to that part of the tutorial)
(But I recommend you read everything)
Note: null_ is prerooted (It roots your gear for you)
Update your gear to V700XXUAMK7 Firmware
Installing Null_ TWRP
USB Debug Mode
Installing Null_ ROM
Install freefalling Theme
Remap Wrist Flick Gesture
Enable Unknown Source APK Installation
Enable MTP
Activating & Updating Xposed / Activating Modules
GravityBox - Advanced Reboot Menu
Hack Connectivity Service - AKA (Network Spoofer)
Bluetooth Internet Access
Nova Settings
Notifications Icon
Soft Buttons
Watch Styler OR UCCW?
Watch Styler
UCCW
Custom Fonts
Custom Sounds
Bluetooth GPS
Dr Who Sound/Boot Theme
How to install APK’s to your gear Without Wondershare
Full System UI? Get back DBL tap settings for quick Volume and Brightness
NotiCounter Widget
Note: Whenever connecting the gear to the PC use a direct connection. NEVER USE A HUB or such. It has been know to cause issues.
(Direct connection works best.)
Update: Jan 16, 2014
Added NotiCounter Widget Tutorial
Update: Jan 04, 2014
Added to Xposed Tutorial for new options included in Null_17
Added to Bluetooth Internet Access (2 options now for Working Internet)
Updated some screenshots
Need Null_ HELP? Check out NULL_ROM Official Q/A - FAQ- General Discussion thread
Also Search the forums for your questions. Please only post replies that are related to the tutorial. All other questions please check other threads. I read them as well. THANKS!
Current Screenshots of My Gear
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to the following people: (In no particular Order)
xda-developers - fourms site
Moderators - Their Hard work
mark manning - xda moderator
Wondershare - Awesome App
AdamLange - Rear Original Rom Thread
fOmey - Null_ & Lots of info
freefalling0411 - ffeefalling theme
rovo89 - Xposed
C3C076 - GravityBox
appleflap - GPS Info
broeuschmeul - BlueGPS4Droid
almulder1092 - myself LOL!
TeamWin - Original TWRP
Villain ROM - vrthemes
Google - Awesome Search engine / android
Samsung - For the Note 3 & Gear
ShareDroid - ShareGPS
VasuDev - UCCW
Omnitel - Watch Styler
MrBIMC - Ultimate Dynamic Navbar
TeslaCoil Software - Nova Launcher
Matt Rankin - youtube Revovery Mode Video
shimp208 - Minimal ADB & Fastboot
mohlsson - GearLocationBridge
codekiem - APK Downloader
Kakann - Watch Face Thread
noname81 - LMT Launcher
EatHeat - Pie Control
daerragh - Odin 3.09
sting0387 - Finding Network Spoofer
capslock66 - Creating Network Spoofer
st-tps - Creating NotiCounter Widget
xda Members (Can't name you all) - Feedback and Questions
And anyone else I forgot.
If I missed anyone PM me and let me know who and for what.
Update your gear to V700XXUAMK7 Firmware:
Update your gear to V700XXUAMK7 Firmware: (Skip if your already on MK7)
Thanks to almulder1092 for the info
Make sure your gear is running V700XXUAMK7 Firmware, (If you are, you can skip this section.)
Note:If your in the USA and there is no update yet, just download the UK Version (BTU - United Kingdom)
Let update our Galaxy Gears firmware. (A must in you want to do anything below)
Note: This could wipe you data, save anything you need just incase.
Preparation:
Download V700XXUAMK7 Firmware from here - Thanks to AdamLange
Download Odin from here - Thanks to daerragh (Get version 3.09)
Installation:
Put your Gear into Download Mode
a. Press and hold the power button until the Restarting appears
b. Repeatedly press the power button until the Select REBOOT MODE appears
c. Press the power button once to move the selection to Download
d. Press and hold the power button for about 3 sec.
e. You are now in download mode.
Connect your Gear to you PC. (Using the Cradle and Micro USB)
Open Odin
Click on the PDA Button
Locate the V700XXUAMK7 Firmware and select it. (It should be a .md5 file, if it is zipped, then unzip it)
Press Start
Once it is completed it will reboot the gear.
Note: Let your gear sit for a bit as it updates everything. I might look like it is stuck on the Samsung logo, but you should see the word Samsung pulsating. That means its working. Should it take more than 5 mins, simply Press and hold the power button down until it resets.
Note: Should you get the dreaded screen of death, just flash the MK7 ROM back onto your gear and start all over.
Screen of Death (LOL)
Make sure the Gear is activated and connected to your Phone. (Samsung Manual)
How To:
If your unsure how to do this, Return your Gear. (LOL)
Youtube Video - Samsung Gear Watch Download/Recovery Mode How To
Screenshots
Click For Larger View
.
Installing Null_ TWRP:
Installing Null_ TWRP: (Version as of this tutorial is Null_ 03 TWRP)
Thanks to fOmey for this Null_ TWRP
Installing Null_ TWRP:
Preparation:
Download Null_ TWRP - fOmey
READ THE NULL_ TWRP Original Post
Installation:
Put your Gear into Download Mode
Connect your Gear to you PC.
Open Odin
Click on the PDA Button
Locate the Null_ TWRP file and select it. (It should be a .md5 file, if it is zipped, then unzip it)
UNTICK THE AUTO REBOOT OPTION IN ODIN.
Press Start
Once it is completed it will reboot the gear.
Null Quote:
If you find the recovery is not sticking & your Gear wipes when attempting to access recovery after flashing, you must root your Gear prior to installing TWRP again & Run the following commands in ADB:
*NOTE* You will gave to accept a supersuser request popup when executing "SU" command
*NOTE 2* Probably a good idea to run this prior to first installation (To save time)
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
ADB stands for Android Debug Bridge
If needed "ADB" can be found here on xda - Thanks to shimp208
Youtube Video - How to Flash a Custom ROM (Null_ and others)
\
Reserved for screenshots (Coming Later)
.
USB Debug Mode
USB Debug Mode
Thanks to fOmey for the info
Now put your gear into USB debug mode:
Preparation:
On your Gear Go to Settings >> Gear Info >> About Gear >> and tap Software version 7 times (After the 3rd tap, it will start counting down on how many taps are left before you can access the developer options.)
Now go back one screen and you should see a new option, USB debug Check the box.
Screenshots
Installing Null_ ROM
Installing Null_ ROM (Version as of this tutorial is Null_ 17)
Thanks to fOmey for this Null_ TWRP
Installing Null_ ROM
Preparation:
Read Null_ Original Post. Make sure you understand everyting. What it can and can't do. (Especially about Bluetooth Tether)
Re Read Null_ Original Post. MAKE SURE YOU UNDERSTAND EVERYTHING
Download Null_
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Null_ ROM zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode (Same steps as Download Mode, but select Recovery Instead)
You should now be in TWRP.
Click on Install
Locate the Null_ Rom zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Null zip file
Swipe to Confirm Flash
Follow the on screen questions
Install Everything, unless you know what your doing.
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the Gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Note: Please be considerate of other peoples time and take the time to read and search for your question before asking it. 98 times out of 100 it has already been answered many times. Let fOmey do what he does best and work on Null_ don't keep asking him questions that are answered in the Original Post.
Thanks from all of us to those that do read and search before asking.
Note: Should you get the dreaded screen of death, just flash the MK7 ROM back onto your gear and start all over.
Screen of Death (LOL)
Reserved for screenshots (Coming Later)
.
Install freefalling Theme
Install freefalling Theme (Version as of this tutorial is v4)
Thanks to freefalling0411 for this theme
(No current support or development, freefalling0411 is having twins and need to take care of his wife and get back to life. Thanks for the wonderful theme!)
Installing freefalling Theme:
Preparation:
Download the Freefalling Theme
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Null_ zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode
You should now be in TWRP.
Click on Install
Locate the Freefalling theme zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Freefalling theme zip file
Swipe to Confirm Flash
Follow the on screen questions
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Note: If you want SystemUI Notifications Bar back (Theme removed it), Get it from here and flash it after the theme has been flash
Reserved for screenshots (Coming Later)
.
Remap Wrist Flick Gesture / Enable Unknown Source APK Installation / Enable MTP
Remap Wrist Flick Gesture / Enable Unknown Source APK Installation / Enable MTP
Thanks to fOmey for the info
Remap Wrist Flick Gesture
How to:
Open up Nova Settings
Goto Gestures & Buttons >> Home Button
Select Default Page. (If you know what your doing, you can change it to what ever you want)
Enable Unknown Source APK Installation:
How to:
Goto Settings >> Security
Check Unknown Sources
Enable MTP: (Allows you to access the SDCard portion of the gear through your PC as you would a usb drive)
How to:
Goto Settings >> Storage
Click on the Menu Button
Select USB computer connection
Check Media Device (MTP)
Remap Wrist Flick Gesturer Screenshots
Enable Unknown Source Screenshots
Enable MTP Screenshots
.
Activating & Updating Xposed / Activating GravityBox
Activating & Updating Xposed / Activating GravityBox - Advanced Reboot Menu / App Settings / Hack Connectivity Service
Thanks to almulder1092 for the info
Activating & Updating Xposed / Activating Modules
How to:
Goto Settings>>Xposed>>Framework
Click on Install/Update
Grant SuperUser Permissions.
Goto Settings>>Xposed>>Modules
Click the checkbox next to App Settings
Click the checkbox next to GravityBox
Click the checkbox next to Hack Connection Service
Click the checkbox next to UDN (If installed)
Reboot (MUST REBOOT HERE)
GravityBox - Advanced Reboot Menu:
How to:
Goto Settings>>GravityBox>>Power Tweaks
Click the checkbox next to Advanced Reboot Menu
Click the checkbox next to Require Reboot Confirmation
Reboot
Hack Connectivity Service
How to:
Goto Settings>>Network Spoofer
Click Wifi and you should see Wifi Spoofed now.
Activating & Updating Xposed / Activating Modules Screenshots
GravityBox Screenshots
Network Spoofer
.
Bluetooth Internet Access
Bluetooth Internet Access
Thanks fOmey & sting0387 for the info
Note: Phone Must Have BT Tethering Option. Most USA Users don't have this option.
Note 2: Playstore / Google Account Manager / Google Map s- These will only work if you have native BT tethering. (Third party apps do not offer the same protocols as native BT Tether and therefore don't work.) (Null_17 fixes this issue)
Bluetooth Internet Access:
Option 1) Phone must have BT Tethering Option.
Preparation:
Turn On BT Tethering on your Phone. (System Settings >> Tethering and Hotspots >> Enable Bluetooth Tethering)
Activation:
On the Gear go to Settings>>Bluetooth
Click on the settings for the profile for your phone.
Scroll down and if you have activated the option on your phone and it supports it, you will see an option to activate on the profile on your gear.
Check the box Internet Access
Option 2) Use 3rd party apps (Such as PdaNet+ / PdaNet Tablet) (Must use Network Spoofer)
Preparation:
On your Gear, Install PdaNet Tablet
On your Phone, Install PdaNet+
Activation:
On the Phone open PdaNet+
Check the box next to Activate Bluetooth Service
On the Gear open PdaNet Tablet
Click onConfigure
Click onAndroid (Bluetooth)
Click onTap here to start scanning...
Once you see your phone appear, Click on it
Go back to the first screen of PdaNet Tablet
Click on Connect (it might be hidden at the bottom of the screen, just a small part is showing, but you can still click on it)
On the Attention screen scroll down and click on I trust this application then click on OK
You should now be greeted with a PdaNet is connected! screen.
Open your Gear Browser and you should see it connect to Google home page.
Note: Should Google Play and such not work even though your browser works, DBL check that you have Network Spoofer enabled and using Spoof WIFI.
Option 1) Phone with native Bluetooth Internet Access Screenshots
Option 2) Using 3rd Part app such as PdaNet+
.
Nova Settings (My Preferences)
Nova Settings
Thanks to almulder1092
Changing Nova Settings: (Preferred settings)
How to:
Open Nova Settings
Desktop
Desktop Grid >> Rows 4, Columns 5
Width Margin >> None
Height Margin >> None
Persistent Search Bar >> Never
Show Shadow (Your Choice, I prefer None)
Home Screens >> Add or remove as many as you like.
Scroll Effect(Your Choice, I prefer wipe (Only available in Prime Version)
Wallpaper Scrolling (Your Choice, I prefer Off)
infinite Scroll (Your Choice, I prefer Checked)
Label Icons (Your Choice, I prefer unchecked)
Resize all widgets >> checked
Widget Overlap >> Checked
Overlap when placing >> Checked
Lock Desktop (Useful for when your done setting the desktop the way you like to prevent accidental changes)
.
Drawer
Drawer App Grid >> Row 3, Columns 3
Scroll Effect (Your Choice, I prefer None)
Background Transparency >> Leave at default
Drawer Style (Your Choice, I prefer Vertical)
Infinity Scroll (Your Choice, I prefer unchecked)
Folders First >> checked
All other options >> default
.
Dock
Enable Dock >> (Your Choice, I prefer checked)
Dock Style >> OFF
Dock Pages (Your Choice, I prefer 1)
Dock Icons (Your Choice, I prefer 6)
Width Margin >> None
Dock Height >> Medium
Small Icons (Your Choice, I prefer checked)
Show Scroll Indicator (Your Choice, I prefer unchecked)
Show Divider (Your Choice, I prefer unchecked)
Infinite Scroll (Your Choice)
Dock as Overlay >> Checked
Automatically Close >> unchecked
.
Folders
Your Choice
.
Look and Feel
Color Theme (Your Choice)
Icon Theme (Your Choice)
Screen Orientation >> Auto-Rotate (Applies only when charging)
All other options (Your Choice)
.
Gestures and Buttons
Home Button (Your Choice, I prefer Default Page)
.
All other settings > default
Note: Nova's reference to the Home Button is actually the function of the writs flick gesture activation.
Notifications Icon / Soft Buttons
Notifications Icon / Soft Buttons
Thanks to fOmey for the info / Thanks to almulder1092 for the info
Creating a Notifications Icon:
How to:
On Nova desktop press and hold
Select Shortcuts >> Activities >> Notifications >> Notifications Activity
Move the icon to where ever you want on the home screens now.
Adding in soft buttons:
How to:
Download Ultimate Dynamic Navbar - thanks MrBIMC
Connect your Gear to Wondershare
Click on your Gear >> Apps (Should list installed apps)
Drag and drop the Ultimate Dynamic Navbar.apk into Wondershare. (This should install the app)
On your Gear goto settings >> Xposed >> Modules
Check Ultimate Dynamic Navbar
Restart the Gear
Once restarted, let the gear again sit for a few mins before you start doing anything again
Open up UDN, Grant it superuser permissions
Turn it on
General Settings
Start at boot - Checked
Type of Trigger (Your Choice, I prefer Whole bottom edge)
Method to activate (Your Choice, I prefer Swipe)
Alternatives to UDN: (Should you have one you prefer let me know and I will list it for others)
LMT Launcher
Pie Control
GMD Gesture Control
Creating a Notifications Icons Sreenshots
Adding in soft buttons Screenshots
.
Watch Styler OR UCCW? / Watch Styler:
Watch Styler OR UCCW? / Watch Styler
Thanks to almulder1092 for the info
Watch Styler OR UCCW?
This is a matter of opinion I like to use UCCW as it is more customizable. However if all your looking for is a Watch Face only, then my all means get watch styler. Both would be widgets to add to Nova home screens.
Need so Ideas, check out this thread - Thanks to Kakann for starting the thread
Watch Styler:
How to:
On your Phone, Install Watch Styler through the Gear Manger >> Samsung Store. (You may need to hit accept on your Gear to install it)
On your Phone, Open Watch Styler, select or create a new face.
Apply the selected Watch face
In Gear Manager goto >> Clocks
Select WatchStyler
Then select the settings icon.
Select the Watch Face you want again
Apply the theme. (The Applied theme should reflect the new selection
On your Gear, On Nova desktop press and hold
Select Widgets >> WatchStyler
Reserved for screenshots (Coming Later)
.
UCCW (Ultimate Custom Widget)
UCCW (Ultimate Custom Widget)
Thanks to almulder1092 for the info
UCCW:
Preparation:
Disconnect your Gear from the PC (If it was connected)
Connect your Phone to PC,
Open Wondershare, Make sure it sees your phone, If not enable debug mode on it just like you did the gear.
Click on Google Play Apps
Search for UCCW, then install. (This should install it to your Phone)
Once installed unplug your phone and plug in your Gear
Click install again (This should install it to your gear)
Note: Now the best thing here to do is create the new widget on your phone first. (Much easier) then transfer it to your Gear. (But you can just make it on your gear if you want to, then there is no need to download it to your phone)
How to:
On your Phone open UCCW.
Select New
Home Screen Grid Size 4x4
Widget Size 4x4
Give it a name.
Select New Skin
Now before you do anything else select Edit objects >> Background >> Dimensions >> Width x Height
Change it to be 320 x 320 (That is the size of the Gear screen)
Now add and customize to what you like.
Once done press Save.
Select Make uzip (for sharing)
Name the Widget
Plug your Phone into the PC
In Wondershare click on your Phone then files
Click on your SDCard, and locate the uccwOutput folder. (you might have 2 SDcards, so check both)
Click on it, then select the Widget you created (.uzip)
Export the file to your computer
.
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
Create a folder called uccwOutput
select the new folder
Drag and drop the widget (uzip) file from your PC to Wondershare.
On your Gear open UCCW
Activate the soft buttons
Press and hold the return button (Long press activates the menu button)
Select Open >> Open uzip
Locate the Widget (uzip) you just transferred
Select it and open it.
Press the soft menu button again and select Save >> Save Skin
Note: Not all items in UCCW are compatible with the gear. Things like Weather, Location, Temperature, Forecast, Gmail, Alerts, do not work.
Installation of Widget.
On your Gear, On Nova desktop press and hold
Select Widgets >> UCCW >> 4X4
Select the New widget you just saved.
Resize to fit desktop if needed.
Note: If you just get a black screen with the words Loading... Then you did not save the Widget correctly.
Reserved for screenshots (Coming Later)
.
Custom Fonts / Sounds
Custom Fonts / Sounds
Thanks to almulder1092 for the info
Custom Fonts for your Gear (by Me)
How to:
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
In the root of your SDCard create a new folder called Fonts
Open the new fonts folder.
Drag and drop .ttf fonts into this folder for use on your gear
Custom Sounds (Notifications / Ringtones) (by Me)
How to:
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
In the root of your SDCard Find the folder called Notifications or Ringtones (What ever type your looking to add)
Open the folder.
Drag and drop .ogg or .mp3's into this folder for use on your Gear.
Reboot Gear for them to show up under Settings >> Sound >> Notifications or Ringtones
Screenshots
Click For Larger View
.
Bluetooth GPS
Bluetooth GPS (How to receive GPS from phone to gear.) -
(Option 1)
Bluetooth GPS Using ShareGPS: (Uses your Phones GPS, only activate when needed, Battery Drain)
Thanks to appelflap for the info
Installation:
Connect your Phone to Wondershare
Click on Google Play and Download/Install ShareGPS
Disconnect your Phone and connect your Gear to Wondershare
Click on Apps
Downlaod BlueGPS4Droid - Thanks broeuschmeul
Drag and drop the BlueGPS4Droid.apk to Wondershare
Setup:
On your Gear goto Settings >> Developers Options
Locate Allow Mock Locations"and check it
On your Phone launch Share GPS
On your Gear launch BlueGPS4Droid
Select Choose Bluetooth GPS
Select your Phone.
Check Start/Stop GPS
On your phone you can verify if it connected.
Open ShareGPS again
Look at Bluetooth Status it should be now connected to your Gear.
Note: ShareGPS will not connect to the gear if a Third party internet Tether is connected.(Native Tether is OK)
(Option 2) - Preferred!
Bluetooth GPS Using GearLocationBridge: (Options None, Wifi/Cell Location or GPS, better battery life using Wifi/Cell )
Thanks to mohlsson for the app OP
Preparation:
Download GearLocationBridge.apk (github Link)
Installation:
Connect your Phone to Wondershare
Click your Phone >> Apps
Drag and drop the GearLocationBridge.apk into Wondershare. (This should install the app)
Disconnect your Phone and connect your Gear to Wondershare
Click on your [BGear >> ]Apps[/B]
Drag and drop the GearLocationBridge.apk into Wondershare. (This should install the app)
Setup:
On your Phone open Gear Location Bridge
Select Network location bridged
On your Gear goto Settings >> Developers Options
Locate Allow Mock Locations"and check it
On your Gear open Gear Location Bridge
Select Network location bridged
Wait a Min and it should connect automatically.
Wifi/Cell updates every 5 minutes if your location has move 100+ meters.
Method can be changed on Phone or Gear (As it affects both)
GearLocationBridge Screenshots
.
Dr Who Sound Theme
Dr Who Sound/Boot Theme
Thanks to almulder1092 for the theme
Dr Who Sound/Boot Theme
UI Sounds:
Charger Connection - Cyberman "Upgrade in progress"
Hourly Alert - K-9 "Affirmative"
LowBattery - K-9 "Danger Master, Danger)
Power On - Dr "This watch is me"
Power Off - K-9 "Goodby Master"
Alarm - "The Rings of Akhaten - "Wake Up" song (Selected 0:50 of the song)
Notifications: (Selectable)
Dr - "Hello, Im the Doctor"
Dr - "This is my Timey Wimey detector, it goes ding when there is stuff"
Dr - "Wibley Wobley Timey Wimey"
K-9 - "Incoming Message Master"
Ringtones: (Selectable)
Dr Who Theme (8th Doctor)
Ring Ring "Help Me Doctor! Help Me Doctor!" beep beep beep beep
Preparation:
Download the Dr_Who_Sound_Boot_Theme.zip
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Dr_Who_Sound_Boot_Theme.zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode
You should now be in TWRP.
Click on Install
Locate the Dr_Who_Sound_Boot_Theme.zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Dr_Who_Sound_Boot_Theme.zip file
Swipe to Confirm Flash
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Restore Original/Samsung Sound/Boot Theme:
Download the Original_Sound_Boot_Theme.zip
Follow the same steps as above but select and use the Original_Sound_Boot_Theme.zip instead.
Screenshots Doctor Who Boot / Samsung Boot
.
How to install APK’s to your gear. Without Wondershare
How to install APK’s to your gear Without Wondershare
Thanks to almulder1092 for the info
This is for anyone looking for an alternative way of getting apps onto the gear.
These instructions work for people who have a Windows/Mac/Linux.
Download fastboot. - DropBox - Zippyshare
Unzip fastboot the root of your drive (You can delete it later when done, or advanced users can unzip it anywhere)
Make sure your Gear is in USB Debug mode
If you’re using Mac or Linux, You can skip this step. If your using windows, make sure you have installed the Samsung USB Drivers.
Plug your Gear into your PC
Now open up a Command Prompt (Terminal window for Mac/Linux) (Google it if you’re unsure how)
.
Type in the following:
For Windows:
cd\
.
cd fastboot
.
adb devices
For Mac:
cd\
cd fastboot
chmod 755 *
./adb-mac devices
For Linux
cd\
cd fastboot
chmod 755 *
./adb-linux devices
Look at your gear, there should be a prompt. Press OK. (If you have connect before using USB this might not appear on the gear, just go to the next step))
If it does not come up, then we will need to kill the process adb.exe running and try launching it from the command prompt again.
Windows:
Open Task Manager, Locate adb.exe and end the task.
Mac/Linux:
Type in the command:
kill adb
Now type in the following:
Windows:
adb devices
Mac:
./adb-mac devices
Linux:
./adb-linux devices
Looking at the Command windows (Terminal window) You should see device. (If you do – GREAT, else go back and try again)
.
Move you apk file you want to install to the fastboot directory
Use the following command to install your apk file:
Windows:
adb install nameoffile.apk
.
Mac:
./adb-mac install nameoffile.apk
Linux:
./adb-linux install nameoffile.apk
Once installed the app should appear on your gear under the apps section.
Noticed AshtonTS had also posted Mac guide so I am linking to it here incase others need it.
Full System UI? Get back DBL tap settings for quick Volume and Brightness
Full System UI? Get back DBL tap settings for quick Volume and Brightness
thanks to fOmey for the info.
If you have installed full system ui, then you might have noticed that a dbl finger dbl tap does not bring up you quick settings anymore. Not current;y there is no way to get that exact view back, as it has been replaced. fOmey has looked into extracting it out, but does not look like i can be done.
But never fear a solution is here.
Option 1)
Put Nova Launcher Prime on your gear so you have access to the Gestures and edit the dbl tap option
Option 2)
Create a shortcut.
What ever option you chose the result will be that same in the end.
How to:
Be sure you have Xposed & GravityBox installed and Activated. (See post #8)
Open up GravityBox
Goto >> Statusbar Tweaks >> QuickSettings Managment >> Statusbar QuickSettings Tiles
Then Select the following
Volume
Ringer Mode
Bluetooth
Brightness
Battery Status
And any other quick options you want.
Now go back to your desktop
press and hold to bring up options
Select Nova Actions >> Expand Quick Settings
You should now have an Icon on your desktop that when pressed will open up Quick Settings for you.
Note: If you have Nova Prime, and want to use a gesture, just select the gesture and then Select Nova Actions >> Expand Quick Settings
Note: You can go back into GraveBox and resort the tiles to your liking. (Along with many other options.
GraveBox Settings Screenshots
Nova Shortcut Screenshots
.
]NotiCounter Widget
NotiCounter Widget (Version as of this tutorial is v1.0)
Thanks to st-tps for creating it.
If your using Null_ and tired of not having a notification badge on your screen, this is the answer.
NotiCounter is just as the title suggests. Its a Widget that you can customize and have notification counts show on your gear screen. And it includes custom sounds.
Preparation.
If you have a previous version be sure to uninstall it before installing the new version.
Download NotiCounter Widget from here
Installation
Install NotiCounterWidget
Reboot Your Gear (Must Reboot after install)
Once rebooted go into Gear Settings >> Sound >> Notifications
Select NotiSilent (If it is not in your list, Did you reboot?) This is simply a blank sound file. this needs to be selected to avoid multiple notifications sounds (Note: Skip this step if you Don't plan to use the sound features in Noti.)
Now to avoid the repeated notification that Noti has been granted SU permissions, lets disable that message.
Open Super SU
Press the # next to NotiCouonter Widget
On the Notifications "Global Default" change that to read Disabled. This will stop the notifications from comming on everytime your screen turns on.
Open NotiCounter Widget app
Read the Pop up box.
Wait for SU permissions to kick in and the give the app SU permissions.
.
Play Sound? Check this box if you want to have a sound play when a notification comes in. (Be sure you did step 4 if you select this)
You can leave the sound file at default or Select a different one. (Click on Choose File)
Once you Select Choose File you will be give a list of sounds that have been included with Noti app.
Select any file and you will hear a preview of the sound file.
If you want to use your own personal sound files, go up one directory and the select Notifications folder. (See previous tutorials for adding custom sound files)
Once you have selected your sound file you want, then click Set
.
Custom Sounds? Check this box if you want to have custom sounds play according to the app .
Select Add Apps
You will be presented with a list of all apps that are set to send notifications to your gear.
Select any app you want a custom sound for
Select the sound file just as you could have above.
Once Selected you will see a Toast message box appear at the bottom letting you know it has been set.
Continue to add any other Custom Apps sounds you want to use.
Once your done got back to main Noti Screen.
If you made a mistake on one of the apps, select Edit List
You will be presented with a list of all the apps selected. Press and hold to edit anyone of them
You will have the option to Change, Abort, Delete.
Once done go back to main Noti Screen
.
Launch Notifications app on tap? Just as it says, Do you want to open the notifications screen when taping on the widget?
Text Size - you can change the text size to larger or small according to your needs
Color - This will alow you to change the color of the text using the sliders as needed.
Widget Background (Ellipse, Round, Transparent, Custom)
Custom Background - Selecting this will allow you to have a custom background
Select your background similar to how you selected a sound. when selecting a pic you will see a preview of it for a few seconds.
Blank spot at 0 unread Notifications? Basically do you want to see a number 0 or nothing at all when there are no notifications?
Power-saving Mode? Normal, Medium Saver, Power Saver. - Normal will give your a more stock feel for the Gear (I prefer Normal)
Normal - Checks for activity in the notifications app, if it´s running it does badge checks with a certain intervall.
Medium Saver - Checks for activity in the notifications app, if it´s running it does badge checks with a certain intervall. When Notifications hit 0 it stops the checks
Power Saver - Only checks Once upon screen On, then nothing.
Restore all Data - This will remove the sound files that Nofi install. If you want to remove Noti you might want to press this button first.
Now that you have your settings Press Save
Now place the widget like you would any other widget.
you will see two options for your widget. Normal and Bold. that is in reference to the Text number. (I prefer Bold)
Check out your new Noti widget.
(Reserved 19) Future Tutorial
Hey guys,
I got myself a new Tab S5E LTE ( to have data connection). However I dont find "Call and message continuity" anywhere. Supposing its only for the wifi version. Which is pointless as LTE doesnt mean phone if you have a dataonly card.
Is there any way to get the feature to the LTE s5e tablet? I rooted it and tried installing APK but it still says "failed"
Thanks!
Robin
copying APK to system app worked. However I cant login to Samsung account . - login failed.
Howto get Call and Message Continuity on S5E LTE
Hey,
I finally got this working.
First you have to root your S5E ( Instructions here: https://forum.xda-developers.com/ga...samsung-galaxy-tab-s5e-sm-t725-t3926742/page2 )
Then download the APK for call and message continuity from internet, copy it to device.
Boot your tablet in "Rooted mode"(vol up and power)
Install the APK via "FX Explorer" with root addon enabled (click on open with and then select FX Root installer, will fail ). Then in FX Explorer copy the app to /system/app/ ( create a new folder, mine is called . CMC). Reboot phone into magisk mode again - it should be visible in settings now. However if you click to enable it you cant as you currently cant add your samsung account.
Reboot your tablet once more, this time in "normal" unrooted mode - add samsung account - done.
Hey,
I finally got Call and Message Continuity on S5E LTE working.
First you have to root your S5E ( Instructions here: https://forum.xda-developers.com/gal...t3926742/page2 )
Then download the APK for call and message continuity from internet, copy it to device.
Boot your tablet in "Rooted mode"(vol up and power)
Install the APK via "FX Explorer" with root addon enabled (click on open with and then select FX Root installer, will fail ). Then in FX Explorer copy the app to /system/app/ ( create a new folder, mine is called . CMC). Reboot phone into magisk mode again - it should be visible in settings now. However if you click to enable it you cant as you currently cant add your samsung account.
Reboot your tablet once more, this time in "normal" unrooted mode - add samsung account - done.
Update 09/29/20:
1. The latest Samsung Health Monitor Version 1..1.0.175.Caravana (Thanks Caravana for the Mod) Download
This tutorial should work on all Android Phones to enable ECG for your Galaxy Watch 3 and Active 2. BP might also work the same way when it is released in the US.
Basic idea is to create your own certificate to sign ECG.tpk application and install it on your watch, then install the Samsung Health Monitor Mod app on your phone.
I have read lots of threads on XDA and can't find a complete tutorial about how to do it for Galaxy Watch 3 or Active 2. Hope this step-by-step tutorial will help. The whole process took me around 30 mins, it shouldn't be very hard. Make sure you back-up your watch first, just in case anything goes wrong and you need to restore data.
You will need an Android Phone, a Windows PC and Galaxy Watch 3/Active 2 watch for this tutorial. And a wireless network.
Downloads:
1. Download Java for Windows offline (64 bit) https://www.java.com/en/download/manual.jsp and install it.
2. Download JavaSE/Oracle JDK https://www.oracle.com/technetwork/java/javase/downloads/index.html Click "JDK Download" from the top the latest version, then it will direct you to a new page, find "Windows x64 Installer" click the download page from the page and install it.
3. Download Tizen SDK https://developer.tizen.org/development/tizen-studio/download Download Latest Tizen Studio with IDE installer, click "64 Bit" to download and install it.
4. Download ecg.tpk, BP.tpk, Fit2Installer from here(ecg_downloads)
5. Download Samsung Health Monitor Version 1..1.0.167.Caravana (Thanks Caravana for the Mod) from here (See update 09/29/20 from the top of the thread to download the latest version)
On Your Phone:
1. Install Samsung Health Monitor Version 1..1.0.167.Caravana on your phone. Open the app enter your name, BOD and etc to finish the setup.
On Your Watch:
1. From your watch, Go to "Settings"->"About Watch"->"Software"->Click On "Software Versio" 5 times until it shows "Developer mode turned on"
2. Go back to "About Watch", make sure it shows "Debugging is turned on", it not click "Debugging" and turn it on.
3. Go to Wifi settings on the watch, change wifi setting to always On, and connect it to the same wireless network with your PC.
4. Reboot the watch. Make sure wifi is connected after the reboot.
From Your PC:
1. Launch Tizen Package Manager and Navigate to 5.5 wearable(It depends on your watch's software version, eg mine shows Tizen Version 5.5.0.1, so I navigate to 5.5 wearable), then click Install icon
2. Scroll down to the Tizen SDK tool and click the install icon
3. Click on the Extension SDK tab
3.1 Click the arrow on Extras
3.2 Install Samsung Certificate Extension and Samsung Wearable Extension
4. Check the Progress tab, once it shows 100%, you can close Tizen Package Manger and do not launch Tizen Studio(we don't need to use Tizen Studio)
5. Open up "Certificate Manager"
6. Click on the "+" icon and from the pop-up window click Samsung Logo.
6.1 Device Type -> Mobile/Wearable, Click Next
6.2 Certificate Profile(Give it whatever name you like), Click Next
6.3 Author Certificate -> Create a new author certificate, Click Next
6.4 Author Certificate -> Enter Author name, Password, Confirm Password as required(Remember the password,. you will need it when you sign the TPK file) and click next
6.5 A pop up will ask you to sign in to your Samsung account, enter your account information and sign in
6.6 Now it will show your certificate has been saved at C:/Users/USERNAME/SamsungCertificate/cert_name and click next.
6.7 Create a new distributor certificate and click next
6.8 Do not change Privilege and password information, do not close these windows, just leave it there, we need to enable debug mode from the watch and connect it to PC now.
7. Open Tizen "Device Manager" from the PC.
8. Click the "Remote Device Manager" icon from top right corner.
9. From pop-up windows, click the "Scan Devices" icon from the top right corner.
10. Once it find your watch turn the connection switch to on. and close pop-up windows. At this time, you should able to see lots of debugging information from Device Manager. (If you don't see debug information, try these steps: 1. Turn off your windows firewall 2. turn off bluetooth&GPS on your watch 3. reboot your watch )
11. Go back to Tizen Certificate Manager, step 9.8, we can see one DUID has been added automatically. Click next.
12. It will show your certificate has been saved at C:/Users/USERNAME/SamsungCertificate/cert_name, Click Finish.
13. Download Fit2installer.zip unzip the whole folder to your desktop.
14. Go to the certificate(C:/Users/USERNAME/SamsungCertificate/cert_name) you just created and copy all files. inside the folder
15. Go to C:\Users\USERNAME\Desktop\Fit2Installer\cert Paste all the certificate file you just copied.
16. Copy ecg.tpk file and paste it at C:\Users\USERNAME\Desktop\Fit2Installer\sign_me
17. Click sign.bat from the Fit2Installer folder. Enter your certificate password.
18. It will show "Package( C:\Users\USERNAME\Desktop\Fit2Installer\install_me\ecg.tpk ) is created successfully." and enter any key to close the window.
19. Now go to "Device Manager", right-click your device, choose "install app", Select ecg.tpk file from C:\Users\USERNAME\Desktop\Fit2Installer\install_me.
20. Wait a few seconds, you should see ECG app has been installed on your watch. Open it.
21. Open the "Samsung Health Monitor" app from your phone, you should be able to read the ECG data from your watch now.
As Blood Pressure has not been released in the U.S, once it released, you should be able to activate for Non-Samsung phone the same way. You can disable debug mode if you want now.
Enjoy!
Reference:
1. https://forum.xda-developers.com/showpost.php?p=83574519&postcount=6
2. https://www.reddit.com/r/GearS3/comments/aljplu/tutorial_how_to_install_tpks_and_wgts_onto_your/
3. https://forum.xda-developers.com/smartwatch/gear-fit/howto-sign-sideload-tizen-applications-t3639793
Nice! I'm in the process of following this guide at the moment. Tizen Studio's package installers are so slow!
Nice to have well documented details! kudos
Step 6. I don't have a Samsung logo. When I click the + in certificate manager it just asks me for a certificate profile name
Is there a risk of voiding the warranty or bricking the watch doing this?
Is there an IPA file for this that can be sideloaded onto an iphone? I'm no expert at this stuff and have only followed the great instructions here before so not sure. Or is there any way to connect my GW3 to my Samsu g Tab S6 on Verizon that shares my iPhone number? I'd like to get the Health Monitor app features as I really don't want to go back to an apple watch.
Supposedly on tizen 5 there is no bp.tpk - ecg and bp are now both in ecg.tpk. installing old ecg.tpk may be main reason for bp not to work. Did anyone try to follow the tutorial but use new ecg.tpk? Does ecg.tpk need to be specialy prepared to by signed with certificate or can we do it with new ecg.tpk that has been posted by caravana?
Can there be a mess if in the future I change my phone and take a samsung?
Does the smartwatch remain unaffected? Will I always have to update it manually?
Works great!
Anyone else having issues w the carvana health monitor app? I keep getting an error saying it cant be run on a rooted phone...
g33gz said:
Anyone else having issues w the carvana health monitor app? I keep getting an error saying it cant be run on a rooted phone...
Click to expand...
Click to collapse
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
rohit83 said:
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
I can confirm I pass safetynet, I have all samsung related items enabled in the hide section and I've renamed the magisk manager app and renamed it. Still nothing
g33gz said:
I can confirm I pass safetynet, I have all samsung related items enabled in the hide section and I've renamed the magisk manager app and renamed it. Still nothing
Click to expand...
Click to collapse
strange, it worked for me though after hiding it in magisk.
Sent from my HD1901 using Tapatalk
rohit83 said:
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
rohit83 said:
strange, it worked for me though after hiding it in magisk.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
Maybe its because I'm on LineageOS? I have an S9
g33gz said:
Maybe its because I'm on LineageOS? I have an S9
Click to expand...
Click to collapse
Not sure man, I'm on Oxygen OS Open beta, rooted on my Oneplus 7t.
Sent from my HD1901 using Tapatalk
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
plouprou said:
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
Click to expand...
Click to collapse
I tried installing bp and it failed to install. But ecg worked.
plouprou said:
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
Click to expand...
Click to collapse
Can you confirm the Tizen version from your watch? I know if you are runing Tizen 4.0.0.8 you could get BP works as well. Only ECG for Tizen 5.
S-C said:
Step 6. I don't have a Samsung logo. When I click the + in certificate manager it just asks me for a certificate profile name
Click to expand...
Click to collapse
Hmm, are you using the latest version Tizen SDK? Mine is Tizen Studio 3.7, they might change the UI a little bit for different versions.
Lazyboy8134 said:
Is there a risk of voiding the warranty or bricking the watch doing this?
Click to expand...
Click to collapse
Well, as the debugging mode has been enabled, if you tell Samsung they will possibly decline the warranty since they don't know what you have done to the watch...... But you can always turn it off, and reset the watch anytime you want.
Hi everyone
I got my new BYD car
I dont have AA or AC and i try to install APK
I stack at passions the i copy APK files from USB to Multimedia
But i cant install them
I get a message like "For your driving safety and system stability, please do not install third party apps"
Any idea ?
Amir
BYD the Chinese car? Where r u from?
Yes, BYD is Chinese car
Someone, any idea ?
I too am interested in any developments on this front.
Hi, can this help you youtube
As of now, this is where we're up to:
1. we can now enable and use USB ADB to sideload apps
2. we can now re-enable Wireless ADB via sideloading a an wireless ADB enabling package
3. we can now replace the system Package Manager with an alternate unrestricted Package Manager
4. we can now install apps via native (or alternate) file manager using alternate-unrestricted Package Manager
Are people aware of this? or are instructions of this yet to be published on XDA?
insinc said:
As of now, this is where we're up to:
1. we can now enable and use USB ADB to sideload apps
2. we can now re-enable Wireless ADB via sideloading a an wireless ADB enabling package
3. we can now replace the system Package Manager with an alternate unrestricted Package Manager
4. we can now install apps via native (or alternate) file manager using alternate-unrestricted Package Manager
Are people aware of this? or are instructions of this yet to be published on XDA?
Click to expand...
Click to collapse
I can't find that infor online, can you please instruct us, I would be very greatfull
@insinc
Is this possible with every Android OEM head unit, like GM Mylink?
Thank you.
Bro, you need to open the box under the console on the passenger side. and you will see Android head just like SOFO888 said.
then you need to remove the thick black sticker and you will see a micro USB slot. with that slot, you can adb sideload apk. that is.
From a friend:
How to install applications on locked yuan/atto3On a USB drive (formatted in FAT32) create a folder called "third party apps" (WITHOUT the quotes)Inside that folder copy the apks you want to installConnect the USB drive to the USB data port of the car.You will see the screen to set a passwordEnter the password 20211231
No need to sideload via ADB anymore.
Although I haven't tested this, you might be able to
1. install the unrestricted BYD package manager here: https://workupload.com/file/EgYhyaba92E
2. install app manager via here: https://github.com/MuntashirAkon/AppManager/releases
3. install Aurora OSS here: https://auroraoss.com/
4. install wireless adb switch from here: https://workupload.com/file/RsgTzvRKe6S
5. enable wireless adb via developer menu: Settings > tap on "restore" several times to show menu
6. launch app manager and grant permissions to aurora OSS to install packages
7. use Aurora OSS to install firefox and other non-google-drm apps
8. use firefox to install gbox and gbox apps via: www.gboxlab.com
insinc said:
From a friend:
How to install applications on locked yuan/atto3On a USB drive (formatted in FAT32) create a folder called "third party apps" (WITHOUT the quotes)Inside that folder copy the apks you want to installConnect the USB drive to the USB data port of the car.You will see the screen to set a passwordEnter the password 20211231
No need to sideload via ADB anymore.
Although I haven't tested this, you might be able to
1. install the unrestricted BYD package manager here: https://workupload.com/file/EgYhyaba92E
2. install app manager via here: https://github.com/MuntashirAkon/AppManager/releases
3. install Aurora OSS here: https://auroraoss.com/
4. install wireless adb switch from here: https://workupload.com/file/RsgTzvRKe6S
5. enable wireless adb via developer menu: Settings > tap on "restore" several times to show menu
6. launch app manager and grant permissions to aurora OSS to install packages
7. use Aurora OSS to install firefox and other non-google-drm apps
8. use firefox to install gbox and gbox apps via: www.gboxlab.com
Click to expand...
Click to collapse
Good stuff bro, I'll test this weekend and will feedback here.
works in Thailand
SOFO888 said:
@insinc
Is this possible with every Android OEM head unit, like GM Mylink?
Thank you.
Click to expand...
Click to collapse
I do it on my GM head unit stock and install apks
Great to here that it is working on GM head units. Did you make it to install Google Maps?
Works like a charm for me in Japan too!! BUT the screen has dimmed alot even on full brightness, when on dash cam no problem but everything else is dimmed a lot now, anyone got any ideas?
@jollyboy1995
Can you PM me some pics of apps and how you did it? Thanks.
SOFO888 said:
@jollyboy1995
Can you PM me some pics of apps and how you did it? Thanks.
Click to expand...
Click to collapse
Harmon os -Gwm Haval -Range Rover -jaguar
Hey everyone just seeing if anyone could help currently have a stock unit which runs android 8.1 just looking for tips and tricks to make better experience Only website I have found so far is this for these headunits I have already installed...
forum.xda-developers.com
insinc said:
From a friend:
How to install applications on locked yuan/atto3On a USB drive (formatted in FAT32) create a folder called "third party apps" (WITHOUT the quotes)Inside that folder copy the apks you want to installConnect the USB drive to the USB data port of the car.You will see the screen to set a passwordEnter the password 20211231
No need to sideload via ADB anymore.
Although I haven't tested this, you might be able to
1. install the unrestricted BYD package manager here: https://workupload.com/file/EgYhyaba92E
2. install app manager via here: https://github.com/MuntashirAkon/AppManager/releases
3. install Aurora OSS here: https://auroraoss.com/
4. install wireless adb switch from here: https://workupload.com/file/RsgTzvRKe6S
5. enable wireless adb via developer menu: Settings > tap on "restore" several times to show menu
6. launch app manager and grant permissions to aurora OSS to install packages
7. use Aurora OSS to install firefox and other non-google-drm apps
8. use firefox to install gbox and gbox apps via: www.gboxlab.com
Click to expand...
Click to collapse
this worked for me on byd atto 3 after softwer update. TNX
revy106 said:
Works like a charm for me in Japan too!! BUT the screen has dimmed alot even on full brightness, when on dash cam no problem but everything else is dimmed a lot now, anyone got any ideas?
Click to expand...
Click to collapse
yeah, your headlights are on. so the screen will only go to "night time" brightness. Day time brightness is so bright at night it's a safety hazard! Because during the day, the screen has to be bright enough it can beat the SUN!
so check if your headlights are set to "on" and change it to "auto" or "off" to get the android screen brighter.