Related
This is place where you can come and ask questions regarding support as well as any other general discussion for the Null rom. Please keep the development thread to just that DEVELOPMENT. The developer of this rom is here to develop and not here to answer your questions because you can't take the time to figure out the answer yourself. This will be a community driven thread. Therefore, if you feel something needs to be added to the OP please mention me in a post and I'll take a look
If you need to download the rom free to stop by the dev thread to download. However, if I see you ask a question in here and then go to that thread to ask the same question I will be handing out infractions. Please consider this your only warning.
On a side note, I'll be transferring the OP of this thread to a person with this device in due time. However, for the moment this needed to be created. If you are willing to take the OP from me please feel free to send me a PM. The only requirement that I would have is that you keep it updated properly.
FAQ / IT DOESNT WORK ! WAH
INTERNET ACCESS
GO INTO "FULL SETTINGS -> BLUETOOTH -> SELECT YOUR PHONE SETTING ICON (ON THE RIGHT OF PHONE NAME) -> TICK INTERNET ACCESS".
ENSURE BLUETOOTH TETHERING IS ENABLED ON YOUR PHONE BEFORE HAND OBVIOUSLY.
*NOTE* ENSURE YOUR MOBILE DEVICE SUPPORTS TETHERING, US VARIANT PHONES HAVE RESTRICTIONS INPLACE. REFER TO THE US INTERNET TETHERING THREAD.
*NOTE 2* BLUETOOTH TETHERING DOES NOT AUTO RECONNECT, INSTALL THIS THIRDPARTY SOLUTION ON YOUR GEAR TO ENABLE AUTO RECONNECT.
PLAYSTORE / GOOGLE ACCOUNT MANAGER HAS STOPPED..
VERIFY YOU HAVE A BLUETOOTH INTERNET TETHERING CONNECTION ESTABLISHED BEFORE ATTEMPTING TO ADD A GOOGLE ACCOUNT.
MUST NOT BE USING THIRD PARTY TETHERING, EG. PDANET.
HOW DO I FULL WIPE?
BOOT INTO RECOVERY MODE AND SELECT THE "RECOVERY" OPTION. DO THIS AFTER FLASHING THE ROM
UNABLE TO WAKE GEAR WHILE IN PHONE CALL
THIS IS CAUSED BY THE HOME BUTTON REMAP MOD, THE HOME BUTTON MUST BE PRESSED IN ORDER TO WAKE THE GEAR UP IN THIS STATE.
ONLY WORK AROUND IS TO EITHER USE THE WRIST WAKEUP GESTURE OR DISABLE THE HOME BUTTON REMAP MOD.
*NOTE* BY DISABLING THE HOME BUTTON REMAP MOD, THIS WILL DISABLE THE ABILITY TO MANUALLY LOCK THE SCREEN WHILE USING A CUSTOM LAUNCHER.
DOUBLE TAP BRIGHTNESS/SOUND TOGGLE HAS DISAPPEARED
THIS IS CAUSED BY USING THE FULL SYSTEM UI, SIMPLY PUT IT REPLACES THE DOUBLE TAP WINDOW WITH THE NOTIFICATION SHADE. BY USING GRAVITYBOX YOU CAN ADD ADDITIONAL TOGGLES LIKE BRIGHTNESS & SOUND TILES TO THE FULL NOTIFICATION SHADE.
OTHERWISE SIMPLY REFLASH THE ROM WITH THE FULL SYSTEMUI OPTION UNTICKED.
SCREEN FLICKERING/GITTERING
THIS IS CAUSED BY THE INITIAL BOOTUP, REBUILDING THE CACHE AND INITIALIZING ALL THE APPS. GIVE YOUR GEAR A FEW MINUTES TO SETUP AND RESTART.
SCREEN UNLOCKS TO NOVALAUNCHER PAGE PREVIEW?
GO INTO "NOVA SETTINGS -> GESTURES -> HOME BUTTON -> NONE".
ENABLE DEVELOPER SETTINGS / USB DEBUGGING
GO INTO "SETTINGS -> GEAR INFO -> ABOUT GEAR", TAP SOFTWARE VERSION 10 TIMES.
ENABLE UNKNOWN SOURCE APK INSTALLATION
GO INTO "FULL SETTINGS -> SECURITY -> TICK UNKNOWN SOURCES".
ENABLE MTP
GO INTO "FULL SETTINGS -> STORAGE -> MENU BUTTON (TOP RIGHT OF SCREEN) -> USB COMPUTER CONNECTION -> MEDIA DEVICE (MTP)".
WATCH STYLER NOT WORKING
ENSURE ITS SELECTED AS THE DEFAULT WATCHFACE IN GEAR MANAGER.
IF CLOCK FACE DOES NOT UPDATE UPON CHANGING, RESTART GEAR.
DOUBLE CLICK HOME BUTTON DOESNT WORK ON TOUCHWIZ LAUNCHER !
*NOTE* DO NOT DO THE FOLLOWING IF YOU ARE USING NOVALAUNCHER, YOU WILL NOT BE ABLE TO MANUALLY LOCK YOUR GEAR.
*NOTE 2* YOU CAN SIMPLY REFLASH THE ROM WITHOUT WIPING AND DISABLE THE HOME BUTTON REMAP MOD.
NAVIGATE/PULL THE FOLLOWING FILE FROM YOUR GEAR: /SYSTEM/USR/KEYLAYOUT/GPIO-KEYS.XML
EDIT IN A TEXT EDITOR SO IT LOOKS LIKE THE BELOW:
Code:
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 116 POWER WAKE
[B]key 172 HOME WAKE[/B]
edit
Amazing. This thread is very much needed song as how the dev thread keeps getting cluttered with posts that wouldn't be there if some one would have read
sent from my Note 3 or Galaxy Gear
Yeah this thread is an awesome idea to leave the general discussion and support issues out of the other thread.
Whenever I select "recovery" it doesn't give me an option to install the rom?
I followed the steps for the root and the add the .zip to my SD card on the phone. When I select the option for recovery it just does a system restore on it. Any help?
You need to flash twrp first
sent from my Note 3 or Galaxy Gear
feature request
[what about to include support fpr AquaMail client?
I'm using it and I think it is the better at the moment
The developer could be interesting....
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Pepski said:
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Click to expand...
Click to collapse
No. Sadly not.
Or at least not with all the bells and whistles working.
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
ktetreault14 said:
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
Click to expand...
Click to collapse
Here's 2 versions. The latest and the previous one, a lot of people are having problems with the latest, and even Samsung supposedly admitted it was bugged and they were going to release a new one. The previous version seems to work fine for people, and there's no real functional updates on the latest one anyway, so you might prefer it.
Latest version - 1.5.121601
Previous version - 1.5.120903
I couldn't get cm11 to download the necessary apks for gear manager so I restored a tw backup and backed up the apks themselves. When I went to restore them the only ones that would not restore were the weather and svoice. It is paired now with gear manager running in the notifications. Still testing out what works and what doesn't
Sent from my Note 3 w/ CM11
Running 16, removed Ms. Pac-Man for running too slow on the Gear, everything's running smooth.
Sent from Spaceball One.
I have nexus 5 rooted and running null16, could anyone please point me out how to make gear manager to work?has anyone made notifications work? so far i can just make calls from it and syncs the time.I have read everywhere but nothing works so far and i can't seem to find a reliable sorce of information. If we could make something like an app and null to be modified to work with that so we lose gear manager dependency i belive that would be a game changer . Fomey i will donate something pretty soon as i allways apreciate work from people creative like yourself .
EDIT: 15 AUD for you Fomey, thank you for your work !
reboot after install of null_16
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Read.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
eroracing said:
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
Click to expand...
Click to collapse
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
almulder1092 said:
Installing Null_ TWRP: (Version as of this tutorial is Null_ 03 TWRP)
Thanks to fOmey for this Null_ TWRP
Installing Null_ TWRP:
Preparation:
Download Null_ TWRP - fOmey
READ THE NULL_ TWRP Original Post
Installation:
Put your Gear into Download Mode
Connect your Gear to you PC.
Open Odin
Click on the PDA Button
Locate the Null_ TWRP file and select it. (It should be a .md5 file, if it is zipped, then unzip it)
Press Start
Once it is completed it will reboot the gear.
Null Quote:
If you find the recovery is not sticking & your Gear wipes when attempting to access recovery after flashing, you must root your Gear prior to installing TWRP again & Run the following commands in ADB:
*NOTE* You will gave to accept a supersuser request popup when executing "SU" command
*NOTE 2* Probably a good idea to run this prior to first installation (To save time)
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
ADB stands for Android Debug Bridge
If needed "ADB" can be found here on xda - Thanks to shimp208
.[/CENTER]
Click to expand...
Click to collapse
gypsydigi said:
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
Click to expand...
Click to collapse
You cannot do what you are asking.... But you can set clock widget. Use Nova settings to hide notification bar, dock and scroll indicators then use gesture and button settings to create gesture to accommodate just about anything! I have swype down to open notification bar..... Swipe up open notification app.... Double tap opens app drawer and 2 finger Swipe up opens my dialer! Just set widget long press and resize to full screen. You may have to adjust colums and rows in Nova settings to accommodate whatever widget you are using in order to center properly. Hope this helps!
Sent from my Note 3 SM-N900A rooted by Designgears
On the newest release (16) there is support for custom boot animation and includes the null boot animation. Is that a part of the aroma installer or is the custom null boot animation a part of the rom that you cannot remove? I'd rather stick with the stock if you don't mind.
Hi
I've installed the last nightly build of CM11 (11-20160612) on my Samsung Captivate, then TeamViewer Host. Everything works fine and I can connect my cell with TV.
If I try to get remote access, a message on the cell invite me to install Quick support add-on. After few seconds : error : app not installed (without any details). I install "QS add-on : Samsung" from Google Play Store but no change.
Some messages in forum propose to get the apk from download directory and manually move to \sys . The "downloaded apk" doesn't exist in my case.
My cell is rooted and SU installed.
Any idea ?
Hey,
I finally got Call and Message Continuity on S5E LTE working.
First you have to root your S5E ( Instructions here: https://forum.xda-developers.com/gal...t3926742/page2 )
Then download the APK for call and message continuity from internet, copy it to device.
Boot your tablet in "Rooted mode"(vol up and power)
Install the APK via "FX Explorer" with root addon enabled (click on open with and then select FX Root installer, will fail ). Then in FX Explorer copy the app to /system/app/ ( create a new folder, mine is called . CMC). Reboot phone into magisk mode again - it should be visible in settings now. However if you click to enable it you cant as you currently cant add your samsung account.
Reboot your tablet once more, this time in "normal" unrooted mode - add samsung account - done.
Update 09/29/20:
1. The latest Samsung Health Monitor Version 1..1.0.175.Caravana (Thanks Caravana for the Mod) Download
This tutorial should work on all Android Phones to enable ECG for your Galaxy Watch 3 and Active 2. BP might also work the same way when it is released in the US.
Basic idea is to create your own certificate to sign ECG.tpk application and install it on your watch, then install the Samsung Health Monitor Mod app on your phone.
I have read lots of threads on XDA and can't find a complete tutorial about how to do it for Galaxy Watch 3 or Active 2. Hope this step-by-step tutorial will help. The whole process took me around 30 mins, it shouldn't be very hard. Make sure you back-up your watch first, just in case anything goes wrong and you need to restore data.
You will need an Android Phone, a Windows PC and Galaxy Watch 3/Active 2 watch for this tutorial. And a wireless network.
Downloads:
1. Download Java for Windows offline (64 bit) https://www.java.com/en/download/manual.jsp and install it.
2. Download JavaSE/Oracle JDK https://www.oracle.com/technetwork/java/javase/downloads/index.html Click "JDK Download" from the top the latest version, then it will direct you to a new page, find "Windows x64 Installer" click the download page from the page and install it.
3. Download Tizen SDK https://developer.tizen.org/development/tizen-studio/download Download Latest Tizen Studio with IDE installer, click "64 Bit" to download and install it.
4. Download ecg.tpk, BP.tpk, Fit2Installer from here(ecg_downloads)
5. Download Samsung Health Monitor Version 1..1.0.167.Caravana (Thanks Caravana for the Mod) from here (See update 09/29/20 from the top of the thread to download the latest version)
On Your Phone:
1. Install Samsung Health Monitor Version 1..1.0.167.Caravana on your phone. Open the app enter your name, BOD and etc to finish the setup.
On Your Watch:
1. From your watch, Go to "Settings"->"About Watch"->"Software"->Click On "Software Versio" 5 times until it shows "Developer mode turned on"
2. Go back to "About Watch", make sure it shows "Debugging is turned on", it not click "Debugging" and turn it on.
3. Go to Wifi settings on the watch, change wifi setting to always On, and connect it to the same wireless network with your PC.
4. Reboot the watch. Make sure wifi is connected after the reboot.
From Your PC:
1. Launch Tizen Package Manager and Navigate to 5.5 wearable(It depends on your watch's software version, eg mine shows Tizen Version 5.5.0.1, so I navigate to 5.5 wearable), then click Install icon
2. Scroll down to the Tizen SDK tool and click the install icon
3. Click on the Extension SDK tab
3.1 Click the arrow on Extras
3.2 Install Samsung Certificate Extension and Samsung Wearable Extension
4. Check the Progress tab, once it shows 100%, you can close Tizen Package Manger and do not launch Tizen Studio(we don't need to use Tizen Studio)
5. Open up "Certificate Manager"
6. Click on the "+" icon and from the pop-up window click Samsung Logo.
6.1 Device Type -> Mobile/Wearable, Click Next
6.2 Certificate Profile(Give it whatever name you like), Click Next
6.3 Author Certificate -> Create a new author certificate, Click Next
6.4 Author Certificate -> Enter Author name, Password, Confirm Password as required(Remember the password,. you will need it when you sign the TPK file) and click next
6.5 A pop up will ask you to sign in to your Samsung account, enter your account information and sign in
6.6 Now it will show your certificate has been saved at C:/Users/USERNAME/SamsungCertificate/cert_name and click next.
6.7 Create a new distributor certificate and click next
6.8 Do not change Privilege and password information, do not close these windows, just leave it there, we need to enable debug mode from the watch and connect it to PC now.
7. Open Tizen "Device Manager" from the PC.
8. Click the "Remote Device Manager" icon from top right corner.
9. From pop-up windows, click the "Scan Devices" icon from the top right corner.
10. Once it find your watch turn the connection switch to on. and close pop-up windows. At this time, you should able to see lots of debugging information from Device Manager. (If you don't see debug information, try these steps: 1. Turn off your windows firewall 2. turn off bluetooth&GPS on your watch 3. reboot your watch )
11. Go back to Tizen Certificate Manager, step 9.8, we can see one DUID has been added automatically. Click next.
12. It will show your certificate has been saved at C:/Users/USERNAME/SamsungCertificate/cert_name, Click Finish.
13. Download Fit2installer.zip unzip the whole folder to your desktop.
14. Go to the certificate(C:/Users/USERNAME/SamsungCertificate/cert_name) you just created and copy all files. inside the folder
15. Go to C:\Users\USERNAME\Desktop\Fit2Installer\cert Paste all the certificate file you just copied.
16. Copy ecg.tpk file and paste it at C:\Users\USERNAME\Desktop\Fit2Installer\sign_me
17. Click sign.bat from the Fit2Installer folder. Enter your certificate password.
18. It will show "Package( C:\Users\USERNAME\Desktop\Fit2Installer\install_me\ecg.tpk ) is created successfully." and enter any key to close the window.
19. Now go to "Device Manager", right-click your device, choose "install app", Select ecg.tpk file from C:\Users\USERNAME\Desktop\Fit2Installer\install_me.
20. Wait a few seconds, you should see ECG app has been installed on your watch. Open it.
21. Open the "Samsung Health Monitor" app from your phone, you should be able to read the ECG data from your watch now.
As Blood Pressure has not been released in the U.S, once it released, you should be able to activate for Non-Samsung phone the same way. You can disable debug mode if you want now.
Enjoy!
Reference:
1. https://forum.xda-developers.com/showpost.php?p=83574519&postcount=6
2. https://www.reddit.com/r/GearS3/comments/aljplu/tutorial_how_to_install_tpks_and_wgts_onto_your/
3. https://forum.xda-developers.com/smartwatch/gear-fit/howto-sign-sideload-tizen-applications-t3639793
Nice! I'm in the process of following this guide at the moment. Tizen Studio's package installers are so slow!
Nice to have well documented details! kudos
Step 6. I don't have a Samsung logo. When I click the + in certificate manager it just asks me for a certificate profile name
Is there a risk of voiding the warranty or bricking the watch doing this?
Is there an IPA file for this that can be sideloaded onto an iphone? I'm no expert at this stuff and have only followed the great instructions here before so not sure. Or is there any way to connect my GW3 to my Samsu g Tab S6 on Verizon that shares my iPhone number? I'd like to get the Health Monitor app features as I really don't want to go back to an apple watch.
Supposedly on tizen 5 there is no bp.tpk - ecg and bp are now both in ecg.tpk. installing old ecg.tpk may be main reason for bp not to work. Did anyone try to follow the tutorial but use new ecg.tpk? Does ecg.tpk need to be specialy prepared to by signed with certificate or can we do it with new ecg.tpk that has been posted by caravana?
Can there be a mess if in the future I change my phone and take a samsung?
Does the smartwatch remain unaffected? Will I always have to update it manually?
Works great!
Anyone else having issues w the carvana health monitor app? I keep getting an error saying it cant be run on a rooted phone...
g33gz said:
Anyone else having issues w the carvana health monitor app? I keep getting an error saying it cant be run on a rooted phone...
Click to expand...
Click to collapse
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
rohit83 said:
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
I can confirm I pass safetynet, I have all samsung related items enabled in the hide section and I've renamed the magisk manager app and renamed it. Still nothing
g33gz said:
I can confirm I pass safetynet, I have all samsung related items enabled in the hide section and I've renamed the magisk manager app and renamed it. Still nothing
Click to expand...
Click to collapse
strange, it worked for me though after hiding it in magisk.
Sent from my HD1901 using Tapatalk
rohit83 said:
hide it in magisk hide section of Magisk manager app.
Also, make sure you're passing safetynet on magisk manager & from manager's settings, enable magisk hide, also hide magisk manager & give it another name.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
rohit83 said:
strange, it worked for me though after hiding it in magisk.
Sent from my HD1901 using Tapatalk
Click to expand...
Click to collapse
Maybe its because I'm on LineageOS? I have an S9
g33gz said:
Maybe its because I'm on LineageOS? I have an S9
Click to expand...
Click to collapse
Not sure man, I'm on Oxygen OS Open beta, rooted on my Oneplus 7t.
Sent from my HD1901 using Tapatalk
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
plouprou said:
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
Click to expand...
Click to collapse
I tried installing bp and it failed to install. But ecg worked.
plouprou said:
Thank you very much!! @xxstd
I had some problems running "sign.bat" due to relative path command routes, but after "customizing" the script changing to absolute path, all went ok.
I've signed BP.tpk and ECG.tpk and both are running OK in my GW3. I live in Spain, and here in Europe neither ECG nor BP are approved, so it is not the reason your BP tpk is not working IMHO.
Click to expand...
Click to collapse
Can you confirm the Tizen version from your watch? I know if you are runing Tizen 4.0.0.8 you could get BP works as well. Only ECG for Tizen 5.
S-C said:
Step 6. I don't have a Samsung logo. When I click the + in certificate manager it just asks me for a certificate profile name
Click to expand...
Click to collapse
Hmm, are you using the latest version Tizen SDK? Mine is Tizen Studio 3.7, they might change the UI a little bit for different versions.
Lazyboy8134 said:
Is there a risk of voiding the warranty or bricking the watch doing this?
Click to expand...
Click to collapse
Well, as the debugging mode has been enabled, if you tell Samsung they will possibly decline the warranty since they don't know what you have done to the watch...... But you can always turn it off, and reset the watch anytime you want.
See post #3 for in depth guide !
->insert usual general disclaimer of liability
Required:
Odin3_v3.14.1 flash tool
Samsung USB Driver installed
Frija or something else, to download stock files
7zip or similar
1: Unlock bootloader (will wipe your precious data, void warranty, break Knox e-fuse and who knows what else !)
-unlock dev option (just harass your Build number in settings)
-be connected to the internet (WiFi or 5g)
-allow USB debugging
-OEM unlock
-be warned that this might cause WWIII
-Power off your device. Press Volume Up + Volume Down THEN plug your Tablet lnto a PC to boot into download mode.
-Release buttons immediately when the blue screen shows itself.
-Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot
-Go through the initial setup.
-Skip through all the steps except wifi or 5g
-sign into your Google or Samsung account
-Enable Developer options & USB debugging
-reboot
-You have an unlock bootloader and have control over your device, (it is unfair that this voids your warranty as you should be able to use your hardware as you please).
2: Root install:
-Install Magisk
-use frija or something else to get the latest file according to your device and your CSC :
-patch the whole AP file with magisk (transfer of big files can be tricky, using SD card to transfer file from computer to tablet and vice versa seems like one if the easiest way)
-use odin to flash AP (the patched one), CP, BL and CSC (will wipe once again and reboot)
-Open magisk to finish install (reboot)
-You have root
3: Root update:
-use Frija or something else to get the latest file according to your device and your CSC :
-patch the whole AP file with magisk
-use Odin to flash AP (the patched one), CP, BL and Home_CSC (using CSC will wipe)
-Press and hold Vol-down and Power let go of all buttons once the screen turn on.
-You have root, data kept and update
Please let me know if something should be added or edited.
Hi @Vinsang! Thanks for the nice post. I'd like to suggest you edit the type of thread this is and make it a "How To Guide" instead of "Question" thread. That will help it stand out, especially if anyone uses the Quick Filters at the top of the list of threads in this section.
Edit: Thanks for changing it. Cheers!
How to Root (or update an already-rooted device)Prereqs
Install the USB driver from https://developer.samsung.com/android-usb-driver
Get the latest Odin from https://odindownloader.com/category/download and unzip it
Get the latest Frija from https://github.com/SlackingVeteran/frija/releases and unzip it
Start Frija and begin downloading the latest firmware for your Model and CSC:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model Numbers
S8 Ultra 5G: SM-X906
S8 Ultra Wifi: SM-X900
S8+ 5G: SM-X806
S8+ Wifi: SM-X800
S8 5G: SM-X706
S8 Wifi: SM-X700
CSC: Settings > About Tablet > Software Information > Service provider software version
Step 1 - Prepare your Tablet (only necessary for first install on unrooted device)
While Frija is downloading the firmware, prepare your device by doing the following:
Settings > About Tablet > Software Information > Click Build Number 7 times quickly
Developer Options (just below About Tablet on the left column)
Turn on USB Debugging
Turn on OEM unlocking
NOTE: If the OEM Unlocking option doesn't appear, connect the device to the internet, wait a few minutes, then try again
Power tablet completely off (Hold volume down + power button if you haven't changed the Bixby settings)
While holding volume up and volume down, plug the tablet into your PC via USB
Let go of volume keys as soon as the blue-green screen shows up
Press and hold volume up for 5 seconds, the screen will change to a confirmation prompt
Press volume up again to confirm, the tablet will reboot
Unplug your tablet from USB
Go through initial setup. Don't bother copying files or installing anything.
Skip signing in to your Google account and Samsung account. You won't be using them for this step.
Settings > About Tablet > Software Information > Click Build Number 7 times quickly
Developer Options (just below About Tablet on the left column)
Turn on USB Debugging
Reboot the tablet
Step 2 - Patch the stock firmware to make it rooted
Frija should have finished downloading by now, unzip the file (remember where you unzipped it to)
Plug your tablet in to your computer via USB and click Allow if it prompts to allow data access
If this is your first install / you're rooting the tablet for the first time:
Download Magisk-vXX.XX.apk from the topmost release at https://github.com/topjohnwu/Magisk/releases
Copy the Magisk-vXX.XX.apk and the AP_xxx_xxx_tar.md5 from the zip file Frija downloaded to:
This PC > Galaxy Tab S8 Ultra > Internal Storage > Download
Open the My Files app on the tablet and browse to Downloads
Click the Magisk-vXX.XX.apk and it will prompt you to click Settings
In Settings, turn on My Files, then it will give you a prompt to Install
When Magisk is done installing, click Open
If your tablet was already rooted, and you're just updating:
Copy the AP_xxx_xxx_tar.md5 from the zip file Frija downloaded to:
This PC > Galaxy Tab S8 Ultra > Internal Storage > Download
After the file is done copying, unplug your tablet from USB
In Magisk, click Install in the top Magisk area, then the option for Select and Patch a file
Click My Files > Downloads, select the AP_XXX_XXX.tar.md5 file and click Done at the bottom
Click Lets Go -> After a few moments, it should display this (ignore 'Installation failed' at the top, it always does that):
Step 3 - Apply the rooted firmware
Plug your tablet back in to USB, then on your PC, go back to This PC > Galaxy Tab S8 Ultra > Internal Storage > Download and copy the magisk_patched-xxx.tar file back to the folder where you unzipped the zip file from Frija
After the copy is finished, unplug your tablet from your PC and completely power off your tablet
While holding volume up and volume down, plug the tablet into your PC via USB
Let go of volume keys as soon as the blue-green screen shows up
Click volume up (the side of volume nearest the power) briefly (don't hold it) to go into download mode
Start Odin and accept the disclaimer prompt
Click BL and select the BL_XXX_XXX.tar.md5 file where you unzipped the zip file from Frija
Click AP and select the magisk_patched-XXX.tar file
If this is your first install / you're rooting the tablet for the first time (this WILL wipe your data):
Click CSC and select the CSC_XXX_XXX.tar.md5
If your tablet was already rooted, and you're just updating (this WILL NOT wipe your data):
Click CSC and select the HOME_CSC_XXX_XXX.tar.md5
Odin should now look like this:
Click Start. When it's finished, Odin will display "PASS!" and the tablet will automatically reboot.
Step 4 - Verify and finalize
Go through the normal setup, signing in to your Google and Samsung accounts this time
Click on Magisk that is now pre-installed, and go through the Settings step to allow it to install again
It should prompt you that your device needs additional setup and one more reboot, click OK
After rebooting, your device should be fully rooted. Use a root checker app if you want to verify.
Step 5 (optional) - Get Netflix (and banking apps etc) working with root
Install https://github.com/Fox2Code/FoxMagiskModuleManager/releases and run it
Search for Universal Safetynet Fix by kdrag0n and install it
In Magisk settings click Systemless hosts, turn on Zygisk, turn on Enforce Denylist
Click Configure Denylist, then the 3 dot menu and Show System Apps
Search for Google Play Store, click it, check the check and turn on all options underneath
Search for Google Play Services, click it, turn on .gms and .gms.unstable ONLY
Search for Netflix, click it, check the check and turn on all options underneath
(optional) Add your bank / pay app, etc here if you'd like
In Settings > Apps, search for Google Play Services and Google Play Store and clear all data (not just cache) for each
Reboot
NOTE - This is currently only passing Widevine level 3, so Netflix is limited to SD. I'm still trying to figure out how to get L1 / full HD.
Is there currently any way to make nandroid backups without TWRP since there isn't a build of it for the Tab S8 line yet?
SavXL said:
Is there currently any way to make nandroid backups without TWRP since there isn't a build of it for the Tab S8 line yet?
Click to expand...
Click to collapse
Not you can't make a full nandroid back up without TWRP for the moment. You can use Swift backup or something similar to backup some things in particular, Google backup is also pretty convenient.
Anyone work out how to get Netflix working with root yet? Also, is Magisk manager showing any modules to download in the Magisk app for you guys? I can install from file, but the downloading functionality doesn't seem to be working.
Dunno about Netflix, but this worked for banking apps:
Add this module : https://github.com/kdrag0n/safetynet-fix
Zigisk and enforced denylist on and add Netflix (or other) in the deny list. Reboot and tryout.
It seemed that the download section isn't there anymore on the latest magisk, same on other devices. You gotta download them separately.
skrowl said:
Anyone work out how to get Netflix working with root yet? Also, is Magisk manager showing any modules to download in the Magisk app for you guys? I can install from file, but the downloading functionality doesn't seem to be working.
Click to expand...
Click to collapse
Not sure when, but somewhere in an update, the ability to download modules from magisk directly was removed. You can download them using an app called Fox's Magisk Module Manager. You can search for modules just like you could on Magisk, and they'll be added once you install them and reboot. Also, for the netflix thing, your device may not be passing safetynet. Checking this was also remove in an update, but you can check it with YASNAC.
Edit: I just did this with my rooted Tab S7+, but it should work with the S8+ and S8U as well. Doing this should let you pass safetynet and be able to use Netflix.
1. Enable Zygisk in Magisk settings, then reboot.
2. Enable Enforce DenyList in Magisk settings, then go to Configure DenyList.
3. Enable show system apps with the menu on the top-right, then search "google play services".
4. Enable DenyList for com.google.android.gms & com.google.android.gms.unstable, then reboot.
5. Open YASNAC to run safetynet attestation, you should be passing basic integrity but failing cts profile match.
6. Download and install the latest version of the safetynet fix for zygisk module, then reboot.
7. Check YASNAC again, you should now be passing basic integrity and cts profile match.
8. Go to settings > apps, find google play service & google play store, clear data for both of them, reboot.
9. Go to the play store > settings, play protect certification should now say "device is certified".
10. Open Magisk > Configure DenyList, search for Netflix (enable show system apps if you need to), enable DenyList for everything, reboot.
11. Update Netflix if it's not up to date. If the play store is allowing you to update Netflix at all, then you're good to go.
Now you have Netflix running on your rooted tab!
Edit 2: Accidentally saved my first edit before I finished the instructions, my bad.
skrowl said:
Prereqs
Install the USB driver from https://developer.samsung.com/android-usb-driver
Get the latest Odin from https://odindownloader.com/category/download and unzip it
Get the latest Frija from https://github.com/SlackingVeteran/frija/releases and unzip it
Start Frija and begin downloading the latest firmware for your Model and CSC:View attachment 5574197
Model Numbers
S8 Ultra 5G: SM-X906
S8 Ultra Wifi: SM-X900
S8+ 5G: SM-X806
S8+ Wifi: SM-X800
S8 5G: SM-X706
S8 Wifi: SM-X700
CSC: Settings > About Tablet > Software Information > Service provider software version
Step 1 - Prepare your Tablet
While Frija is downloading the firmware, prepare your device by doing the following:
Settings > About Tablet > Software Information > Click Build Number 7 times quickly
Developer Options (just below About Tablet on the left column)
Turn on OEM unlocking
Turn on USB Debugging
Power tablet completely off (Hold volume down + power button if you haven't changed the Bixby settings)
While holding volume up and volume down, plug the tablet into your PC via USB
Let go of volume keys as soon as the blue-green screen shows up
Press and hold volume up for 5 seconds, the screen will change to a confirmation prompt
Press volume up again to confirm, the tablet will reboot
Unplug your tablet from USB
Go through initial setup. Don't bother copying files or installing anything.
Skip signing in to your Google account and Samsung account. You won't be using them for this step.
Settings > About Tablet > Software Information > Click Build Number 7 times quickly
Developer Options (just below About Tablet on the left column)
Turn on USB Debugging
Reboot the tablet
Step 2 - Patch the stock firmware to make it rooted
Frija should have finished downloading by now, unzip the file (remember where you unzipped it to)
Plug your tablet in to your computer via USB and click Allow if it prompts to allow data access
If this is your first install / you're rooting the tablet for the first time:
Download Magisk-vXX.XX.apk from the topmost release at https://github.com/topjohnwu/Magisk/releases
Copy the Magisk-vXX.XX.apk and the AP_xxx_xxx_tar.md5 from the zip file Frija downloaded to:
This PC > Galaxy Tab S8 Ultra > Internal Storage > Download
Open the My Files app on the tablet and browse to Downloads
Click the Magisk-vXX.XX.apk and it will prompt you to click Settings
In Settings, turn on My Files, then it will give you a prompt to Install
When Magisk is done installing, click Open
If your tablet was already rooted, and you're just updating:
Copy the AP_xxx_xxx_tar.md5 from the zip file Frija downloaded to:
This PC > Galaxy Tab S8 Ultra > Internal Storage > Download
Open Magisk
In Magisk, click Install in the top Magisk area, then the option for Select and Patch a file
Click My Files > Downloads, select the AP_XXX_XXX.tar.md5 file and click Done at the bottom
Click Lets Go ->. After a few moments and it should give you a screen like this:View attachment 5574199
Step 3 - Apply the rooted firmware
On your PC, go back to This PC > Galaxy Tab S8 Ultra > Internal Storage > Download and copy the magisk_patched-xxx.tar file back to the folder where you unzipped the zip file from Frija
After the copy is finished, unplug your tablet from your PC and turn the tablet off
While holding volume up and volume down, plug the tablet into your PC via USB
Let go of volume keys as soon as the blue-green screen shows up
Click volume up briefly (don't hold it) to go into download mode
Start Odin and accept the disclaimer prompt.
Click BL and select the BL_XXX_XXX.tar.md5 file where you unzipped the zip file from Frija
Click AP and select the magisk_patched-XXX.tar file
If this is your first install / you're rooting the tablet for the first time:
Click CSC and select the CSC_XXX_XXX.tar.md5
If your tablet was already rooted, and you're just updating:
Click CSC and select the HOME_CSC_XXX_XXX.tar.md5
Odin should now look like this:View attachment 5574201
Click Start. When it's finished, Odin will display "PASS!" and the tablet will automatically reboot.
Step 4 - Verify and finalize
Go through the normal setup, signing in to your Google and Samsung accounts this time
Click on Magisk that is now pre-installed, and go through the Settings step to allow it to install again
It should prompt you that your device needs additional setup and one more reboot, click OK
After rebooting, your device should be fully rooted. Use a root checker app if you want to verify.
Edit - Thanks OP, but I don't think of this as a better guide. I just took really careful notes of what I was doing, so that I'd be able to reproduce it in 6 months when my brain had completely forgotten all the buttons!
Click to expand...
Click to collapse
Excellent guide. I just had my OOBI this morning & I forgot about having to change the date to an earlier one, check for a software update, etc before being able to see OEM unlock in developer settings. But that's a one & done.
skrowl said:
Anyone work out how to get Netflix working with root yet? Also, is Magisk manager showing any modules to download in the Magisk app for you guys? I can install from file, but the downloading functionality doesn't seem to be working.
Click to expand...
Click to collapse
To download magisk modules use this app; https://github.com/Fox2Code/FoxMagiskModuleManager
To hide root you can try this:
1. Magisk -> Settings -> Hide the Magisk app (It will get a new random package name so other apps won't see that it's actually Magisk and additionally you can choose a new name for the app as well.)
2. Open the newly created magisk app, install extra files when prompted and tab will reboot automatically.
3. Flash MagiskHide Props Config https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf/releases
4. Reboot
5. Flash Universal Safetynet Fix https://github.com/kdrag0n/safetynet-fix/releases
6. Reboot
7. Add any app you want to hide root from to DenyList: Google Play Store, Google Play Services, Google Services Framework, Netflix, banking apps etc.
8. Enforce DenyList MUST stay turned off!
9. Flash Shamiko module to hide root properly.
Releases · LSPosed/LSPosed.github.io
Contribute to LSPosed/LSPosed.github.io development by creating an account on GitHub.
github.com
10. Reboot
After checking Frija, found that an update was available fro my SM-X906B EUX, Just updated to X906BXXU1AVCD/X906BOXM1AVCD/X906BXXU1AVCD using step 3 of the guide without issue (root and data kept).
Is there a way to be notify when an update is out ? Or do i have to manually check every month?
Do we have changelog or something similar?
Vinsang said:
After checking Frija, found that an update was available fro my SM-X906B EUX, Just updated to X906BXXU1AVCD/X906BOXM1AVCD/X906BXXU1AVCD using step 3 of the guide without issue (root and data kept).
Is there a way to be notify when an update is out ? Or do i have to manually check every month?
Do we have changelog or something similar?
Click to expand...
Click to collapse
Someone else had given the link to this site (for your model) https://samfw.com/firmware/SM-X906B.
No automatic notifications, but I use a Windows program that checks sites for updates (https://samfw.com/firmware/SM-X900 for my model, which won't arrive for another 12 days).
Might also be able to use https://www.sammobile.com/firmwares/
Somewhere on this site might occasionally be generic changelogs https://www.sammobile.com/news/galaxy-tab-s8-ultra-february-2022-security-update-released/#
Samsung Galaxy Tab S8 Ultra
Introduction Samsung is making no secret of the fact that it wants to offer the best Android tablet on the market. ...
www.sammobile.com
Samsung Galaxy Tab S8+
Introduction Prior to the Galaxy Tab S8 series, the
www.sammobile.com
Samsung Galaxy Tab S8
Introduction Samsung's flagship tablet lineup was due for a major refresh and the company came through with the Galaxy Tab S8 ...
www.sammobile.com
Quick question. If another software update were to come out, could I update it and still have magisk and root access afterwards? My Tab S8+ says its device status is official, and it doesn't tell me that my device is rooted when I connect to the server to check for updates. So, if I updated this way, would that remove the whole patching the AP file with magisk and flashing it with Odin thing? It'd be awesome to have the latest updates and such while maintaining root access.
To keep root and your data while updating, follow the step 3 of the guide in post #1( it requires that you look manually for updates).
I wouldn't advise to update via OTA while rooted. I don't even think you'll get the prompts.
Vinsang said:
To keep root and your data while updating, follow the step 3 of the guide in post #1( it requires that you look manually for updates).
I wouldn't advise to update via OTA while rooted. I don't even think you'll get the prompts.
Click to expand...
Click to collapse
That's odd because I got the prompt to update on my rooted Tab S7+ (it also says the device status is official) when the OneUI 4.1 update came out for it. I haven't tested to see if that would change anything, but since the S7+ has TWRP, I can just restore a backup Incase something doesn't turn out well.
Hi all. I purchased a SM-X900 from the Samsung website(UK). I am having a serious problem with getting the OEM unlocking option to display in the developer options menu. I have tried the known workarounds (change date/disable automatic updates, etc) but had no success. Does anyone have any other methods/ideas? I previously had the tab s7+ and had no problems with this.
Any tips would be much appreciated!
brunosilvauk said:
Hi all. I purchased a SM-X900 from the Samsung website(UK). I am having a serious problem with getting the OEM unlocking option to display in the developer options menu. I have tried the known workarounds (change date/disable automatic updates, etc) but had no success. Does anyone have any other methods/ideas? I previously had the tab s7+ and had no problems with this.
Any tips would be much appreciated!
Click to expand...
Click to collapse
I've had some issues where after enabling OEM Unlocking and going through the process, after Unlocking and resetting, the option disappears, but OEM is still unlocked. Not sure what causes this, but after rebooting for some root-required things and checking again, the option was there and changeable. I actually went throught the normal initialization process on my Tab S7+ and Tab S8+ (wifi, clock, samsung account, etc) and never had any issues. Maybe try either factory resetting again or flashing latest stock firmware (you can flash official firmware even if oem is locked). YMMV though. This specific issue of the option not showing up at all never happened for me, so I'm not sure how much help my suggestions will be.
SavXL said:
I've had some issues where after enabling OEM Unlocking and going through the process, after Unlocking and resetting, the option disappears, but OEM is still unlocked. Not sure what causes this, but after rebooting for some root-required things and checking again, the option was there and changeable. I actually went throught the normal initialization process on my Tab S7+ and Tab S8+ (wifi, clock, samsung account, etc) and never had any issues. Maybe try either factory resetting again or flashing latest stock firmware (you can flash official firmware even if oem is locked). YMMV though. This specific issue of the option not showing up at all never happened for me, so I'm not sure how much help my suggestions will be.
Click to expand...
Click to collapse
Thanks, in my case, I have not seen this OEM option at all, since I received the device. I have not been able to root it.
brunosilvauk said:
Thanks, in my case, I have not seen this OEM option at all, since I received the device. I have not been able to root it.
Click to expand...
Click to collapse
Well, something I can recommend is downloading the latest firmware update for your specific device (use either frija or samfw), going into download mode by holding vol+ and vol- while connecting the device to a PC, and flashing it with Odin, or you can update officially since your device hasn't been rooted yet. Maybe the current version you're on is affecting it somehow? No clue man. This issue is brand new to me.
SavXL said:
Well, something I can recommend is downloading the latest firmware update for your specific device (use either frija or samfw), going into download mode by holding vol+ and vol- while connecting the device to a PC, and flashing it with Odin, or you can update officially since your device hasn't been rooted yet. Maybe the current version you're on is affecting it somehow? No clue man. This issue is brand new to me.
Click to expand...
Click to collapse
No joy, have no idea how to fix this. Thank you for your input anyway! Maybe someone else has any other ideas?