[Q] Camera stopped working after screen replacement - LG Optimus 4X HD

Hello guys,
As the title says, I replaced my P880 screen because it had an awful crack on it. The thing is that after I changed it, back in my house I tried to take a picture, but it said that it couldn't connect to the camera, or something like that. This had happened to me before, so I restarted the phone and nothing, so after reading some blogs (no one exactly related to the camera problem) I decided to make a full wipe of my phone and restoring it to factory settings. Always hopefully, it didn't work so I realized that the guy who made the replacement might have forgotten to reconnect the camera socket (is that the correct name?), but I can't take it to the service center to get it fixed because they are closed on saturdays and I can't go on monday because I'm leaving the country for a few weeks.
So I was wondering if I can make this check in my house, which tools would I need and, the most important thing, what and where should I check that is connected to the mainboard.
Thank you very much in advance, really hope someone can help, as I need the camera :/

Check my repair thread in the general section. I list all the tools needed and am pretty sure you only need to remove the back plate covering the motherboard. The camera module should have a cable, follow it and make sure it is pressed in all the way.
sent from my amazingly awesome OnePlus One
don't forget to hit thanks!

Related

Problem! Please help! G1 goes to sleep and doesn't wake back up.

I don't know what caused this.
I got my G1 today. It worked for probably 2-3 hours perfectly fine.
I had an app freeze (either Barcode Scanner or Lock 2.0) and had to do a full hard reset.
Now, whenever the phones screen darkens or I put it to sleep manually, it WILL NOT come back up.
I have factory reset three times now to try and get this to work.
When the screen is black, all buttons on the phone still light up and so does the LED indicator up top. I had my phone set to use a locking pattern screen at one point during one reset to test out and when the screen went black, I was still able to try and log in by doing my pattern. It unlocked, but still showed nothing on the screen.
Please help!
I've tried:
Turning Wi-Fi off
Turning 3g Off
Disclaimer: Yes, I've searched. I can find other users with the same problem but none of them seem to have a solution.
Phone is NOT ROOTED and has the factory ROM.
Update 1: Update: It only freezes/blacks out when I try to wake the phone from one of the front key buttons.
If I'm sliding to unlock, it seems to be fine.... (but if I've already tried to open from the front it doesnt)
Update 2: If I mash all the buttons in random orders for about a minute or two it seems to come back. Anyone have any idea?
Update 3: I'm thinking this has to be an issue with none of the buttons waking the phone up when closed. If I lock the phone with the "END" key, and then click the front "END" Key again, nothing happens. If I slide the phone open, and click it twice - the phone wakes up.
Update 4: Confirmed update 3. Phone will not unlock via front keys unless it's slid open (or open enough to trigger).
I would really, really appreciate help with this.
Hate to bump this, but I've added some detail on the top and bottom. Have to leave for work, hopefully someone might have an idea by the time I get back.
Well you can try to reload the factory rom or root it and try a custom rom and see if the problem still exist. If it is still happening then it would be a hardware problem and need to be sent in. And yes you will still be covered under warranty with HTC since the phone is still less than a year old.
I had a problem with exactly the same symptoms. It turned out that the SD card was cocked-up so home, core, and some other process would hang trying to read it and the phone would not wake-up the screen any more.
Did you try removing the SD card and seeing if that helps?
Karolis said:
I had a problem with exactly the same symptoms. It turned out that the SD card was cocked-up so home, core, and some other process would hang trying to read it and the phone would not wake-up the screen any more.
Did you try removing the SD card and seeing if that helps?
Click to expand...
Click to collapse
Removed the SD card and rebooted the phone.
No change ( still acts the same way ).
Did you factory reset after or was it an instant change?
I don't mind losing data to fix this.
supremeteam256 said:
Well you can try to reload the factory rom or root it and try a custom rom and see if the problem still exist. If it is still happening then it would be a hardware problem and need to be sent in. And yes you will still be covered under warranty with HTC since the phone is still less than a year old.
Click to expand...
Click to collapse
Wouldn't I have to root to reload the factory rom? Is there a rooting tutorial based just on that?
zeabrid said:
Wouldn't I have to root to reload the factory rom? Is there a rooting tutorial based just on that?
Click to expand...
Click to collapse
If you use the official update you don't have to have root. There are some links on here. I'll see if I can find it for you.
https://android.clients.google.com/updates/signed-gfh-CRB43-from-CRB21.c88b03d2.zip
That should be it, but can't confirm since I'm on my work computer.
Some thoughts--may be useful, or not:
Mine was doing that too, but it was caused because I dunked mine underwater during an urban exploring mission. I dried it out, replaced the LCD screen, and everything worked until it would go to sleep. Then I had to do a variety of button mashes and opening the keyboard to get it to come back to life. Sometimes it just wouldn't come back. The problem grew worse over time.
If wiping and reflashing (no need to use a stock ROM) gets you nowhere, then I would suspect a deeper hardware issue. I see you bought it used, can you contact the seller?
If you want to check for water damage, take out the battery and look at the tiny circular sticker in the battery chamber--if it is not white, it has been water damaged. (And the warranty will not be honored.)
Other Lesson: No urban exploring with G1s.
The link didn't work, btw.
derfolo said:
Some thoughts--may be useful, or not:
Mine was doing that too, but it was caused because I dunked mine underwater during an urban exploring mission. I dried it out, replaced the LCD screen, and everything worked until it would go to sleep. Then I had to do a variety of button mashes and opening the keyboard to get it to come back to life. Sometimes it just wouldn't come back. The problem grew worse over time.
If wiping and reflashing (no need to use a stock ROM) gets you nowhere, then I would suspect a deeper hardware issue. I see you bought it used, can you contact the seller?
If you want to check for water damage, take out the battery and look at the tiny circular sticker in the battery chamber--if it is not white, it has been water damaged. (And the warranty will not be honored.)
Other Lesson: No urban exploring with G1s.
Click to expand...
Click to collapse
Zero water damage.
That's great news zeabrid! In that case, I agree with an earlier poster--you should be covered by warranty. Wipe and flash a good rooted rom, and if that doesn't work, revert to stock and demand a new phone.
derfolo said:
That's great news zeabrid! In that case, I agree with an earlier poster--you should be covered by warranty. Wipe and flash a good rooted rom, and if that doesn't work, revert to stock and demand a new phone.
Click to expand...
Click to collapse
Do you have a link to a guide that teaches how to do this (with the stock rom)? I can only see a few that're spread out.
I'm not entirely sure my phone can boot into safe mode/disk mode, so we'll see about that.
Another update: When I boot into safe mode, the same problem exists.
Edit: Just emailed HTC.
This can officially no longer be considered a software issue.
I just rooted and installed a standard ROM. Same issue.
It happens all the way at boot now, just realized this.
HTC emailed me back and told me to call them directly. Will do that tomorrow.
if I find a solution I'll post it immediately.
Alright, my phone is officially ****ed.
Restored back to the original rom.
New problem now: When I close the screen, the backlight goes out and doesn't come back on. (I can still barely see everything, but there's no light).
Calling HTC today.
Edit: Called T-Mo support. They suggested deleting programs to free up space (I only have 2 downloaded and to reset (already done)
=(
Edit2: Called and placed a RMA with HTC after talking to two of their customer support reps. Thankfully, they forwarded me up the support tier after only about a minute with each person when they realized I had already tried all other steps.
The RMA process was surprisingly easy. I have everything set up, and when I get paid (tomorrow) I'm going to ship the phone out. I was given an estimation of 7-10 business days for full repair and return shipping (which sounds great in my opinion - I've never sent anything in for warranty work before).
I'll update you guys once I hear from their repair team on whether or not I'm going to be covered under warranty (I told them that the phone was a gift to me), and if not what the cost is going to be. Like I said earlier in the thread, all water damage indicators are clear and I have unrooted my phone, so I should be covered hopefully.
Thanks to anyone who posted in this thread.
zeabrid said:
Alright, my phone is officially ****ed.
Restored back to the original rom.
New problem now: When I close the screen, the backlight goes out and doesn't come back on. (I can still barely see everything, but there's no light).
Calling HTC today.
Edit: Called T-Mo support. They suggested deleting programs to free up space (I only have 2 downloaded and to reset (already done)
=(
Edit2: Called and placed a RMA with HTC after talking to two of their customer support reps. Thankfully, they forwarded me up the support tier after only about a minute with each person when they realized I had already tried all other steps.
The RMA process was surprisingly easy. I have everything set up, and when I get paid (tomorrow) I'm going to ship the phone out. I was given an estimation of 7-10 business days for full repair and return shipping (which sounds great in my opinion - I've never sent anything in for warranty work before).
I'll update you guys once I hear from their repair team on whether or not I'm going to be covered under warranty (I told them that the phone was a gift to me), and if not what the cost is going to be. Like I said earlier in the thread, all water damage indicators are clear and I have unrooted my phone, so I should be covered hopefully.
Thanks to anyone who posted in this thread.
Click to expand...
Click to collapse
Yea it defitenly sounds like a hardware issue and needs to be fixed. Glad your getting it fixed and you'll be covered no problem.
Do you know if they charge return shipping if it's covered under warranty? I have to pay my own shipping there, and they had me put a credit card down on file in case I either bail when its already there or they need to charge for repair.
zeabrid said:
Do you know if they charge return shipping if it's covered under warranty? I have to pay my own shipping there, and they had me put a credit card down on file in case I either bail when its already there or they need to charge for repair.
Click to expand...
Click to collapse
To be honest I don't know the answer but would like to say they would pay for it. But they would have to let you know of the charge before they apply a charge to a credit card.
wow its weird cause im just having a similiar issue now.. in landscape mode.. phone and back light work perfectly. but one i close the screen everything goes virtually blank, everything is running perfectly just the screen light wont turn on..
will try some of your previous methods.. hopefully it works on mine..=/
thanks, for the info zeabrid

No light on my HTC

First I want to say hello to everybody because this is my first thread.
I found a lot of solutions for my problems on this forum but I can not find solution for brand new problem that appeared yesterday. The thing is that my phone fall out from my pocket and now I do not have any picture and light anymore. I can turn on phone, synchronize with my laptop but no flashing light on buttons and no picture. The LCD seems OK (no scratch or visible sign that is broken).
Does anybody know what is wrong or what can I check? Phone has no warranty anymore.
try and get the help from general options.
if you cant get this fixed.. please let me know..
i am badly in need of dead Touch diamonds..
we are working on a college project....
please be kind
I managed to repair it. I opened it, put all together and it works now. I think that one (or both) connectors on the back side of main board lost connection when the phone fall on the floor. So lucky me, I have a working phone.
Sorry asnaveenkumar, now it works.

Droid 3 screen stays black .

So the phone (XT860 Bell) has problems when I unlock it the screen stays black. The phone works though cause when someone calls I can still pick up as I know somewhat where the green button is. But for the rest I can't do anything.
The only way to get the phone back is to remove the battery and restart the phone. Then it works again.
Anyone else had this problem?
have you tried hard resetting it?
No will do so. But before doing that I thought maybe there is some simple solution.
After the update to 2.3.6 things went all a bit wrong I think.
If you got this after the update, I am quite confident data wipe will solve your problem. You can try wiping cache only first - this way you won't lose your configuration and might solve the problem. The update supposedly wipes cache, but maybe that didn't work properly while you were updating. Enter stock recovery and give it a try.
Hey thanks for the help. But just did a reset. Not sure what went wrong when I did the update. Did wipe. Annnnyways. Right now it's stable. Let's see if it stays like this.
Ok sadly the reset didn't fix it. It took a whole day to go black again but still happened.
Any other solutions? I am scared that it's a hardware failure...but let's hope not cause I am in Holland.
I have the droid 3 and the same exact thing is happening to me. Sorry to tell you this but it has to deal wit the connector between the keyboard and screen. I've taken mine to get checked by a "phone doctor" and they told me that. I will tell you this now ,since it is still in the early stages, it's going to get worse to the point that it will stay black. Get it fixed by a techy or get a replacement soon. Mine reached it's point today and I am going to need to get it fixed. Hope it helps.
Johnny2293 said:
I have the droid 3 and the same exact thing is happening to me. Sorry to tell you this but it has to deal wit the connector between the keyboard and screen. I've taken mine to get checked by a "phone doctor" and they told me that. I will tell you this now ,since it is still in the early stages, it's going to get worse to the point that it will stay black. Get it fixed by a techy or get a replacement soon. Mine reached it's point today and I am going to need to get it fixed. Hope it helps.
Click to expand...
Click to collapse
Doesn't sound good man :-(......
Though it happened a lot the passed days since the reset ( knock on wood) only once. Do wonder why it happens less now.
Yea you can reset all you want it's going to go blank. I had to right the dial pad numbers with marker on the screen just to make calls. I say get it fixed or replaced soon
I've got the same issue here. I know the thread is old, but I'm from the Netherlands (just like eezdva) and would like to know how to repair this.
lucaspr said:
I've got the same issue here. I know the thread is old, but I'm from the Netherlands (just like eezdva) and would like to know how to repair this.
Click to expand...
Click to collapse
If you can't take it back and want to try to fix it yourself you need to search for a droid 3 flex cable. The one you want has the front facing camera, front sensors and earpiece speaker on it. Then head on over to ifixit for a teardown guide (sorry no repair manual yet, I plan on working on one).
I have to add that taking this phone apart to replace this part is no small feat, and it would probably be better finding a phone doctor to do it for you, or just getting a new phone.
When you buy the part, request an OEM part, I have been sent cables where the front facing camera displays sideways, or doesn't work at all. Most also don't come with the front button deflector, and that has to be transferred from the old cable.
Hope this helps
Ok . Well I don't really know what the problem is. But it went away. Actually it started I think after applying the update . I got myself another external sdcard . At a certain moment I decided to remove it and things cooled down. It now actually never happens anymore.
Well I gues you're lucky!
My screen sometimes starts all scrambled and the phone doesn't power on. Sliding the screen a couple of time sometimes helpes, but most of the time I don't really know howto get the phone working again. I think it's more stable when I leave the phone 'slided out' (don't know the right word now).
And I searched Motorolas website and found 2 reparing companies in the Netherlands. They both are authorized by Motorola, as of such I think this repair will be in warranty.
I do have to send it for repair. I don't want to take it apart because of what bitz_dv said. I'll let you know!
No Fix
When I was gone on a short holiday my college got a call from the 'authorized' motorola repair center. They can't fix my phone. I need to pay 11 euro to get it back and that's it. I tried calling them but there was no answer.
I sended my phone in on 22 may 2012 and now they decided they can't repair it. I spoke to Ted from Negri Electronics who told me to get in touch with Motorola as my warranty is still valid.
I'm a little confused, where should I go if an official repair center can't fix my phone but do tell me the repair is within warranty..
What can I do? Besides ordering the parts and take the phone apart myself..
I started my search for the flex cable... I did repair a N97 once, within the warranty period and later on sended it in and they repaired it under warranty....
Is this the cable I'm searching for:
http://www.globaldirectparts.com/Motorola-Droid-3-XT862-Motherboard-Flex-Ribbon-p/mot1040660.htm
I am from Netherlands, and have the same problem with the screen, looks like many users from Netherlands do.. coincidence?
When i jst slide out the keyboard , a little bit is enough, and the screen goes black ( black screen of death ) it doesnt power on with power button.
I looked for a flex cable at ebay, and it surprised me , that cable is also doing the front camera, and speaker... My front camera wasnt working too, and speaker made strange sounds many times, so it could be that cable, but not sure.
Check my thread, i have also uploaded a video to make it more clear
http://forum.xda-developers.com/showthread.php?t=1955892

Droid Turbo Motherboard Layout (where is wifi?)

Hello Everyone,
I have been unable to find this information anywhere so I thought if anyone knows this would be a good spot for it. So a quick back story, my turbo took a dip in a hot tub for about 5 minutes. I put it in rice as quick as I could (about an hour) long story short it was completely dead unresponsive. I ended up doing a bunch of research and buying an ultrasonic cleaner, taking it apart and cleaning it soaking in 99% isopropyl. I did that several times and each time more functionality returned. At this point everything works perfectly other than wifi and bluetooth (presumably on the same chip). They are both permanently grayed out and cannot be turned on. I would like to know where physically the problem is before attempting anything further.
So can anyone point out the wifi, bluetooth and antenna for each on these pictures? I tried to post in pictures but it seems I cannot because I am a new user. I think you can copy and paste these into browser though or maybe someone else can post one in for reference. The first image is the back of the screen as well as the little cover that goes over the battery. The second is the motherboard.
granttrainingcenter.com/images/phone2.jpg
granttrainingcenter.com/images/phone1.jpg
Oh and while Im at it does anyone think there could be a software issue resulting from water damage like would I need to reflash some drivers or something?
All help is greatly appreciated!
Im going to try contacting motorola and ill update post if I have any luck
You should try flashing the software using rsd and doing a factory reset! Doubt Motorola will be of any help cuz u void the warranty when u take open ur phone and I don't think water damage comes under warranty!
Are you sure there is reason to believe this could be software related? I just finished rooting and getting everything set up, itd be a shame to start over.
Motorola was no help of course said its top secret. Is there no one out there with the electrical engineering or phone repair background to tell where the chip is from those pictures?
Nobody will know from those pictures - all of the IC's are hidden under the metal shields. Your best bet is to check out the FCC filing pictures of the phone, there should be some with the shields removed. If you can read any of the #'s start googling them.
Or find someone else who has taken high-res pictures with the shields removed, chances are they are out there.

Rear camera turn black when use it

Whenever I try to use the rear camera the display turns black while only showing the HUD. The HUD works fine, but the camera doesn't work at all. Nothing is blocking it either.
When switching camera modes (to manual mode for example), an error pops up saying that the "camera is not available"
IMPORTANT NOTE: The front facing camera is working perfectly fine.
Things I tried to do (aside from shipping it for repair):
1. Android repair via the PC companion software
2. Internal reset
3. Safe mode
4. Clearing cache files for the built-in camera app
5. Installing an alternative camera app (the built-in one was disabled)
6. downgrade and upgrade
7.change camera for new one (tested)
I had same situation with regular Z3. Someone brings it to service where I'm working and my first think was camera fault but changing camera didn't fix it. Near camera connection You can see some small capacitors, we call it filters. It looks like capacitors but it's soldered not only on opposite sides but 2 points on both sides. In regular Z3 there was 5 elements like this to change and after that camera starts working. I don't remember how exactly it's made in Z3c but it's really possible that it's the same issue and same way to fix it.
One more thing, if You can check one one more camera to exclude camera itself cause most issues like this are caused by faulty camera. I had many phones (most Z1 and Z1c) with this issue and changing camera always was the solution.
Good luck.
Same Here. Need help too.
Sent from my D5803 using XDA Free mobile app
I have three cameras and two z3c, I interchange camera and phone and always the same result
At this moment I don't have any Z3c to disassembly (except mu own but under warranty) to check where those capacitors are but if You could take a picture of camera connector on motherboard and near area I can mark which one should change.
@Chamelleon
Main camera not working
I have the same issue with my Z3 compact. The issue started happening on the 11th month of my one year warranty, I sent it for repair (14 business days y + shipping time back and forth). It came back with the same issue. Sent it back right away. After another three weeks without my phone, I got it back. Guess what? EXACT SAME ISSUE!
I called their support line explaining what happened, the guy told me that there is nothing they can do about it since my warranty expired. Of course they didn't have in consideration that I sent my phone before it expired and it took about seven weeks back and forth. There wasn't any sort of damage on my phone, was never dropped or damaged in any way, I never submerged it even if in theory, that would be ok. The report said "it has reviewed the functioning of the unit, unfortunately the defect is in the PCB so it is not able to undergo repairs to it."
The guy on the phone told me what he thought the report meant. It means there is damage on the main board(not caused by me) and the one year warranty manufacturer warranty department won't repair it. Maybe, if I had bought the 2 year "extended" warranty, they could do something about it. I asked if the issue is that my one year warranty was expired or if it is something that they just don't fix unless you get the "extended" warranty. He couldn't answer me and the only thing he said was "is there anything else I can help you with?"
From what I understood, there are two completely different departments, the one year manufacturer warranty that only cover some things. Not even sure what, because if it's broken screen, water damage or any physical abuse, they won't fix it. If it's a problem with the main board or PCB, they won't fix it either. It is a mystery to me what gets fixed in that department. The other department is the 2 year extended warranty. I'm not sure what they are willing to fix there, but from what they guy on the phone told me, it's more than the one year regular warranty.
Long story short, after two trips to FedEx, at least 8 hours total on phone calls, more than 7 weeks without my phone, I ended where I started. Sorry Sony, never again. Worst customer support I have ever experienced.
At this photo I can see only 4 of this capacitors and marked it, maybe it should be four or one I missed cause quality. Anyway regular Z3 has 5 like this and after changing all 5 camera start working again. You can desolder it from most Sony phones, I used capacitors from MK16 (Xperia Pro). So find some Sony board with capacitors like this and ask someone with good hot air solder station (if You don't have one) to change it.
Any news to this problem? I bought used Z3C with black rear camera problem because it was cheap. (Yes, the front facing camera is working perfectly fine). So far I have only tried software fixes and obviously they didn't help. I ordered new camera module from ebay and I'm now waiting for it. Has anyone tried soldering new capacitors if the new camera module doesn't help?
EDIT: Here is another thead with same problem: http://forum.xda-developers.com/z3-compact/help/rear-camera-hardware-detected-black-t3231509
As I said I've done it only in regular Z3 but If You gonna try give me some info is this solution is also working in Z3c case.
Chamelleon said:
As I said I've done it only in regular Z3 but If You gonna try give me some info is this solution is also working in Z3c case.
Click to expand...
Click to collapse
I'm still waiting for new camera module. If the new module is not working I will try soldering new capacitors. I will keep you up to date here .
Any news??
Completely forgot to post this, hope it help someone. I made the same thing with black camera on my Z3c. After I broke audio port in my Z3c and had to send it to warranty I took my gf phone, Z3c also. I restored my TWRP backup to her phone and all except camera was working. Camera was completely black but only main, front was OK. After that I was afraid that it's another hardware problem like Yours but after reflashing to stock problem gone. I repeated it few times to check if I'm right and I was. After flashing backup from another phone even without TA and Kernel backup there is a problem with camera.
So I was wrong saying it's only hardware problem. If anyone still has this issue and didn't reflashed his phone check it first.
@Chamelleon yes it's somehow a software problem (if we could say that ). For me i did fix it.
I did a Nandroid backup for my black Z3 compact (camera works properly) an restored it on my new White Z3 compact (also camera woks fine). after restoring the white z3c rear camera shows black screen, the front one is good.
=> i did a format factory reset : didn't work.
=> flashed a TFT file : didn't work.
=> flashed a D5803_23.4.A.1.232_Customized FR.ftf : IT WORKS !
and then i remembered that my phone was from "SFR" , a french network provider.
i hope this helps also
Edit: too new account, would be nice if a mod unlocks the posting of the direct image links and fixes the links - I think they are useful as this is a common problem and i already invested hours translating russian and documenting my research nobody else should have to do it
for me it was a hardware problem after dropping it.. I even changed the camera module.
Did some reseach, russian sites have some input:
Layout1: directupload.net/file/d/4472/9andayji_jpg.htm
Layout2: directupload.net/file/d/4472/vzvgbqqo_jpg.htm
It was loose, but when i tried to push it down with a hot metal to "solder" it, at some point it jumped away and was lost because it is so tiny!
Missing part: directupload.net/file/d/4472/qmut35qt_jpg.htm
The russian site suggest this soldering of bridges, however its not clear to me if they mean one of this electronic pieces (4pins each) or also the lower one.
Russian: directupload.net/file/d/4472/ag43kmda_jpg.htm
The question is now how these (likely) filters (because so close to the camera have to be bridges, it seemed to have worked for some russians:
Pins: directupload.net/file/d/4472/k86j53hr_png.htm
Not sure if there are 4 indipendend pins or if for those small footprints of electronic devices they use only the edges and then they have the same signal.
I was not able to see any text written on those two things, however i didnt have any magnifying glass.
basmok said:
Edit: too new account, would be nice if a mod unlocks the posting of the direct image links and fixes the links - I think they are useful as this is a common problem and i already invested hours translating russian and documenting my research nobody else should have to do it
for me it was a hardware problem after dropping it.. I even changed the camera module.
Did some reseach, russian sites have some input:
Layout1: directupload.net/file/d/4472/9andayji_jpg.htm
Layout2: directupload.net/file/d/4472/vzvgbqqo_jpg.htm
It was loose, but when i tried to push it down with a hot metal to "solder" it, at some point it jumped away and was lost because it is so tiny!
Missing part: directupload.net/file/d/4472/qmut35qt_jpg.htm
The russian site suggest this soldering of bridges, however its not clear to me if they mean one of this electronic pieces (4pins each) or also the lower one.
Russian: directupload.net/file/d/4472/ag43kmda_jpg.htm
The question is now how these (likely) filters (because so close to the camera have to be bridges, it seemed to have worked for some russians:
Pins: directupload.net/file/d/4472/k86j53hr_png.htm
Not sure if there are 4 indipendend pins or if for those small footprints of electronic devices they use only the edges and then they have the same signal.
I was not able to see any text written on those two things, however i didnt have any magnifying glass.
Click to expand...
Click to collapse
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
mrfrantastic said:
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
Click to expand...
Click to collapse
Try flashing stock ROM based on your country as i mentioned up.
mrfrantastic said:
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
Click to expand...
Click to collapse
Me not (also changed the HW cam), the guys on the russian site yes (even with other similar sony).
Just check if there is something loose, maybe you are lucky and its a software problem *fingers crossed*. To me it happend exactly after dropping (and changing the screen which went without problems) so I was quite sure its HW based.
basmok said:
Me not (also changed the HW cam), the guys on the russian site yes (even with other similar sony).
Just check if there is something loose, maybe you are lucky and its a software problem *fingers crossed*. To me it happend exactly after dropping (and changing the screen which went without problems) so I was quite sure its HW based.
Click to expand...
Click to collapse
Hi basmok,
First off thanks for the research and for the pictures!
I have a similar story, phone was dropped, rear camera won't work, tried different ROMs without any luck then took phone apart and saw that one of the four tiny capacitors
just fell off and now it's MIA...
The last pic from your post (directupload.net/file/d/4472/k86j53hr_png.htm) which I assume shows the soldering of the bridge doesn't seem to work...
Do you still have that pic?
Also did you make any progress on the camera fix or gave up?
Thanks,
Ati
AtiGala said:
Hi basmok,
Do you still have that pic?
Also did you make any progress on the camera fix or gave up?
Thanks,
Ati
Click to expand...
Click to collapse
You were lucky, they were already in the recycle bin and deleted on the camera. Best I could do picturewise, i dont have a macro lens. Here we go, added all to imgurl so hopefully they survive longer: http://imgur.com/a/Of1DY
And no, didnt make any progress as i dont know what component they are. Normally all components have lasered some code but not sure if its just too tiny for my eyes or if they dont have it. I was a bit unlucky as i didnt have a soldering tool, so i tried it by pushing the pin down with a paperclip which i headed with a lighter --- well it jumped away and was not the best approach

Categories

Resources