Related
Hey guys,
For some reason my Gear dies in half a day and I can't work out why. I'm using Skin's modded Tizen ROM but have been doing so for months and this has just started to happen.
- I have no apps installed;
- I don't have auto on when I raise my wrist, although I've tried it with this on and makes no difference;
- I've reset the phone to factory settings. It was actually fine during the day. Put it in my drawer over night, woke up 7 hours later and it had gone from 75% to dead!
- Reset it AGAIN and it's still muffed!;
- Uninstalled the Gear s/w and reinstalled to no avail.
I may be barking up the wrong tree here, but it seemed to coincide with the orange coloured version of the Gear manager. Does anyone have the apk for the previous version where it was all white with a colourful top border please? Or failing that, have any idea what the hell my watch thinks it's up to?
Thanks!
EDIT
Solution
1. Deleted the Gear software (and checked for any remainders in the file manager...although personally I found none);
2. Hard reset the watch, just in case;
3. Installed Gear Manager 2.1.14071502 (courtesy of Brendo);
4. Paired and got it all working well. This alone sorted the battery life which was nice.
5. I let the software update automatically; (obviously bypassing the dodgy version)!
6. Boom! It works fine with the latest app!
Did you try resetting watch? Check link in my sig for older versions of gm
Brendo said:
Did you try resetting watch? Check link in my sig for older versions of gm
Click to expand...
Click to collapse
Yep I've also reset the watch on two occasions. Still dying within 9 hours Cheers for the apk's though, I'll see if that makes any difference. Otherwise I may have to ditch Skin's ROM and try the official - see if that helps.
I am getting almost the same thing over the last few days. My Gear Manager updated to a newer version and I have had the issue ever since. Idk what about updating that on my phone would have to do with the Gears battery life but I have changed a few settings on my notifications to see if that is going to help. I also keep getting "saproviders has stopped" CONSTANTLY. Was popping up every 3 seconds and I could not do anything with my phone. Finally got into Titanium and froze that app and I have had no more issues with that on my phone but I don't think that is cause my Gear to have poor battery life would it? I may have to go back to a older version of Gear Manager.
Similar thing for me with saproviders although it was happening because I had disabled Unified Daemon (EUR) process. Reenabled it and that went....although sometimes the UD(EUR) drains my phone battery and is really only used for weather updates.
As for the draining issue, I'm having a go with Gear Manager 2.1.14071502 and seeing if it makes any difference. So far it is, but I will report my findings back in 24hrs!
jonboyuk said:
Similar thing for me with saproviders although it was happening because I had disabled Unified Daemon (EUR) process. Reenabled it and that went....although sometimes the UD(EUR) drains my phone battery and is really only used for weather updates.
As for the draining issue, I'm having a go with Gear Manager 2.1.14071502 and seeing if it makes any difference. So far it is, but I will report my findings back in 24hrs!
Click to expand...
Click to collapse
That is exactly the version I downloaded also. Gonna have to figure out how to get it to stop wanting to auto update to the newer versions. Just gonna set my settings and not go back to gear manager for awhile. See if it makes a difference for my Gears battery life before I go looking at anything else.
Okay that has fixed it, going back to Gear Manager 2.1.14071502! The watch has been on for 3.5 hours and is still at 100% rather than 55% as it was yesterday!!!
WTF Samsung?!?!
What the hell have they done with their latest Gear app? It must be causing some sort of wakelock on the watch itself.
Guess I'll wait for a month for newer releases.
jonboyuk said:
Okay that has fixed it, going back to Gear Manager 2.1.14071502! The watch has been on for 3.5 hours and is still at 100% rather than 55% as it was yesterday!!!
WTF Samsung?!?!
What the hell have they done with their latest Gear app? It must be causing some sort of wakelock on the watch itself.
Guess I'll wait for a month for newer releases.
Click to expand...
Click to collapse
Good to know about the Gear Manager, I was gonna suggest a reset , but doing the reset via "recovery" , instead of selecting "download" like when using Odin, you select "recovery" and it resets also. I've done the reset that way in the past and it fixed my issues. I had looked all over the Tizen OS for battery stats with no luck. Maybe the Gear somehow stash's the stats or something on the phone instead...? Hmm, I'm gonna dig around in gear manager..
Chris
noellenchris said:
Good to know about the Gear Manager, I was gonna suggest a reset , but doing the reset via "recovery" , instead of selecting "download" like when using Odin, you select "recovery" and it resets also. I've done the reset that way in the past and it fixed my issues. I had looked all over the Tizen OS for battery stats with no luck. Maybe the Gear somehow stash's the stats or something on the phone instead...? Hmm, I'm gonna dig around in gear manager..
Chris
Click to expand...
Click to collapse
Yea have a look Chris. Actually I did reset via the GM first time, the second time I did it via the hardware...as in hold power, keep tapping it and reset that way. Both ways made little unfortunately.
My watch was still on 97% after 8 hours of none use over night so I'm pretty sure it's GM. However, now it wants to update and I literally cannot stop it If I say no, it exits the app, if I say yes the obvious happens. How can I block it?
Also, just for fun I've let it run the update. I know the first version of the 'orange GM' had issues and Samsung updated that immediately. I'm speculating over whether that first cocked up version brought over an issue into the latest one. Thereby if I go from an even older version to the latest, the issue may disappear... as always, I'll keep posting results.
after downgrading GM to previous version, my battery life also improved, after 9 hours of having it at work, taking some pics, sync to internet i had 70% left. gorgeous!
i will never ever press update again. each update only brings more bugs and no new functionality.
Well now I want to potentially throw a curve ball...although we'll see by tomorrow. After downgrading to 2.1.14071502 then upgrading to the latest my gear has been sat idle for 2 hours and sits at 100% battery life.
If this works, it means the previous version of the latest software created some kind of bug and carried itself through to the latest revision. So - this *may* have sorted it. I'll have to keep an eye on it for now but it's looking promising.
i did downgrade but it force app to upgrade or it will stop
Well I've never double posted before in my life! Not sure how that happened - apologies
Right it appears to be fixed (finally).
24 hours - 8% battery use - using the latest Gear software...GREAT!
Theory
The first version of the new batch of gear software had some weird bug causing a wakelock on the watch. Upgrading the app didn't remove it.
What I did
1. Deleted the Gear software (and checked for any remainders in the file manager...although personally I found none);
2. Hard reset the watch, just in case;
3. Installed Gear Manager 2.1.14071502 (courtesy of Brendo);
4. Paired and got it all working well. This alone sorted the battery life which was nice.
5. I let the software update automatically; (obviously bypassing the dodgy version)!
6. Boom! It works fine with the latest app!
All of that said, you may be able to skip steps 3-5 and directly install the latest version....but I tried that and for some reason I still has horrendous battery life.
I'm not sure why the steps above fixed it, but they did. So have a go if this is pi**ing you off as it may just work.
Cheers!
@jonboyuk I've done what you did ,didnt work , even downloaded latest version 2.2.14092299 from @Brendo but still keeps the going to 2.2.14090599 and saprovider FC , i did clean data saprovider and uninstall it worked , but after restarting gear and re-connect it back as it was even uninstalling saprovider wont help anymore.
so now its draining battery so quick. and media control not working.
jonboyuk said:
Yea have a look Chris. Actually I did reset via the GM first time, the second time I did it via the hardware...as in hold power, keep tapping it and reset that way. Both ways made little unfortunately.
My watch was still on 97% after 8 hours of none use over night so I'm pretty sure it's GM. However, now it wants to update and I literally cannot stop it If I say no, it exits the app, if I say yes the obvious happens. How can I block it?
Also, just for fun I've let it run the update. I know the first version of the 'orange GM' had issues and Samsung updated that immediately. I'm speculating over whether that first cocked up version brought over an issue into the latest one. Thereby if I go from an even older version to the latest, the issue may disappear... as always, I'll keep posting results.
Click to expand...
Click to collapse
I ran the same previous version of GM you did. I got GREAT battery life with it. Completely fixed my problem. Now I do have that stubborn update that keeps popping. This is what I do. I click GM app. Update popup comes up and says Cancel or Update. I click the update and when the DL starts, I hit the home button on my GS4 to minimize the app and then i hold the Home button to clear all apps which shuts down the GM app and kills the update. Then I go back to GM app and it does not ask me to update any more. It stays away until I reboot the phone normally. Temp fix i guess but Ill look into it more and see if there is a way to completely stop it.
mjrshark said:
@jonboyuk I've done what you did ,didnt work , even downloaded latest version 2.2.14092299 from @Brendo but still keeps the going to 2.2.14090599 and saprovider FC , i did clean data saprovider and uninstall it worked , but after restarting gear and re-connect it back as it was even uninstalling saprovider wont help anymore.
so now its draining battery so quick. and media control not working.
Click to expand...
Click to collapse
I had this issue. I went into Titanium Backup and froze the SAProviders app. Stopped the popup because it was constantly popping up and was very annoying and could not use my phone at all. Frezzing the app solved the pop up but the bad battery life still stayed until i reverted back to a older version of the GM app like I said in the comment above this one. Still looking for a way to perm stop the update from popping up.
Downgrde to previous GM
jonboyuk said:
Hey guys,
For some reason my Gear dies in half a day and I can't work out why. I'm using Skin's modded Tizen ROM but have been doing so for months and this has just started to happen.
- I have no apps installed;
- I don't have auto on when I raise my wrist, although I've tried it with this on and makes no difference;
- I've reset the phone to factory settings. It was actually fine during the day. Put it in my drawer over night, woke up 7 hours later and it had gone from 75% to dead!
- Reset it AGAIN and it's still muffed!;
- Uninstalled the Gear s/w and reinstalled to no avail.
I may be barking up the wrong tree here, but it seemed to coincide with the orange coloured version of the Gear manager. Does anyone have the apk for the previous version where it was all white with a colourful top border please? Or failing that, have any idea what the hell my watch thinks it's up to?
Thanks!
EDIT
Solution
1. Deleted the Gear software (and checked for any remainders in the file manager...although personally I found none);
2. Hard reset the watch, just in case;
3. Installed Gear Manager 2.1.14071502 (courtesy of Brendo);
4. Paired and got it all working well. This alone sorted the battery life which was nice.
5. I let the software update automatically; (obviously bypassing the dodgy version)!
6. Boom! It works fine with the latest app!
Click to expand...
Click to collapse
Every time I try to go back it re-installs 599. Even if I stop it by holding down the home button and close all apps. I re-open GM and it goes right back to downloading additional software. Has anyone figured a way around this? My watch is dead in 6 hours the way it is now so it's basically useless...
djskipellis said:
Every time I try to go back it re-installs 599. Even if I stop it by holding down the home button and close all apps. I re-open GM and it goes right back to downloading additional software. Has anyone figured a way around this? My watch is dead in 6 hours the way it is now so it's basically useless...
Click to expand...
Click to collapse
first you need to uninstall new Gear Manager, then disable Samsung Apps (Settings->Apps), and then install older GM, you choose. That helped me to disable auto GM update from Samsung, what was very nervous...
Guys, I removed with Titanium all the Gear stuff and installed the 14071502 version without a problem. Freezing SAProviders stopped the update notification from showing up. But my Gear still uses around 10%/hour of battery Anything else I can try?
Sent from my SM-N9005
Daved+ said:
Guys, I removed with Titanium all the Gear stuff and installed the 14071502 version without a problem. Freezing SAProviders stopped the update notification from showing up. But my Gear still uses around 10%/hour of battery Anything else I can try?
Sent from my SM-N9005
Click to expand...
Click to collapse
I have also installed the 2.1.14071502 version. To prevent forcing to upgrade to 2.2, I just disabled Wifi and 3G.. so, it only installs the software of this version. When I got paired, I go to Gear Manager Setup and uncheck the Automatic Update .. so, I only have that version. For goprovider FC, I installed the version from here: http://forum.xda-developers.com/showthread.php?t=2758364 (goprovider-signed-20140529.apk )
And that's all! I have a working goprovider, with 2.1 Manager.... BUT, this version doesn't allow the notification from any app! So, I don't get notifications from WhatsApp, FB, skype.. none! So, do you have another later version (not 2.2)? or any other way to get Whatsapp,etc notifications?
Just recently, when I try to invoke S-Voice on my gear, it both gives me and reads me the message: "It looks like another application is using the mic. Please close it and try again".
Gear is running Tizen OS.
Phone is a GS4 running latest Hyperdrive Rom RLS19
Have not recalled adding any new apps that would effect this to my phone and certainly haven't added anything to the Gear.
Any ideas on how to troubleshoot? I assume this is related to the phone and something being open mic on it?
A side note: S-Voice via my phone works flawlessly and does not report this message.
Update: Ok, so I have determined that the 'sa-providers' fix eluded to on here for those of us afflicted with the massive force closes since Gear Manager updated last is the culprit. If I remove it with TIBU on phone and let Gear Manager re-install the latest version of it, I can get s-voice to function from Gear to phone again.
Major problem is, After about 30 seconds, sa-providers continuosly force closes every 2 seconds thus making the phone un-usable until you kill the BT connection to stop it. Tried clearing data for sa-providers, that fixes things for another 30 seconds to a minute and problem persists.
Any ideas folks?
Thanks
I am getting the same message when I try to use the s-voice on the watch to respond to a text. It has worked in the past.
I am not running any special rom nor have I rooted my phone or the gear
I have a Sprint Galaxy S5
My Gear is on firmware V700XXUBNC1 (if it makes a difference), I have Gear manager version 1.7.110499 on my Samsung S4 (4.4.2).
Watch Styler is installed on the phone and available on the V700 and applies themes ok, what I have noticed is that when Analog themes are applied the hour hand does not move as expected.
E.g. When half past the hour the hour hand still points at the O-Clock position. Even at 5 to the hour it still points at the original O-Clock position.
This causes all sorts of misreads of time, because say 2:55 would at a glance be read as 1:55 (5 to 2) at a glance.
Is there a fix, I've had no joy with trying to find the developer of the software.
Cheers.
Ok sorted it, turned out it was the version of watch styler, samung apps version fails, found earlier version, works great.
Is there any new development for the Turn by Turn notifications for the Gear 1. I have been trying to install the DMA Navi but it is unsuccessful (it installs then un-installs itself). I was just curious if there was any other options. I have been away from Gear Development for about a year now but am back to wearing the watch and just curious to what is new. Is there anything else going on that has been developed for the Gear 1 in the last 6 months or so that I am missing out on? I have the latest Tizen 3.0 flashed currently.
Supposed to be GPS and GPA
unable to understand
bro unable to understand dis process ... tell me in deep:highfive:
EDIT: Doing a factory reset will solve many of the issues mentioned, specially the battery drain, I suggest you to do a factory reset and do the initial setup, then leave the watch on charge overnight, the next day restart both your phone and your watch (don't take the watch of the charger yet), wait 20 minutes and then unplug the watch from the wall and just use it as usual, you should see a huge battery improvement. I did.
Bugs I noticed so far, please check if you can reproduce these yourself and let us know yours so we make a list. This is a thread I started on Asus forums and it might help ppl here to to iron some of these out.
1- After a call (accepted or not) the blue MIC image stays on the watch even after the call has ended (this happened on AW 1.5 already) - Multiple reports
2 - Watch vibrates non-stop during a call, even if you picked the call allready on the phone, the watch will start vibrating with no reason. - Multiple reports - SUPER ANNOYING!!!
3 - Battery drains much faster, with same usage I end a day with 30% on AW 2.0 instead of 65 to 70% on AW 1.5 - Multiple reports
4 - When not trough Wifi the "ok Google" command gives an error saying Google is out of reach, restarting phone fixes it, but if connection of phone and watch is broken, the "OK Google" voice command (or long-pressing the main button) won't work again, nor will other apps like the App store - Multiple reports
5 - if I pick one phone number with the "text message' icon, the watch does not go into listening mode to get the text content. Instead it keep on loading with the loading icon and no message can be sent out. However if I use "OK Google" command instead of go thru the Contact app I can send text messages - One report
6 - Turning theater mode on seems to break the alarm. Thankfully the alarm will still go off, but the screen becomes unresponsive. Clicking dismiss or snooze won't work. Restart of watch is needed. Only happens when the watch is in theater mode. - One report
7 - Huge delay when phone receives a call to when watch shoes that call. - Multiple reports.
8 - Dowload speed on watch is most of the times terrible slow - Multiple reports
9 - "Ok Google" actions takes much longer to activate than on previous version - Multiple reports
10 - WhatsApp-ing someone is impossible it keeps asking "to whom?" indefinitely. - One report
11 - Pairing seems to be having problems - One report
12 - UI losing frames - One report
13 - Keyboard missing some symbols - Multiple reports
1. This occurred to me on 1.5 but hasn't reproduced it for me on 2.0
3. Battery draining around 4% per hour. Seems very similar to 1.5
9. Seems about the same to me.
Clean cache!
None of them, except for keyboard symbols.
All the same issues until I clean the cache.
1. Turn off the watch
2. Press the main and bottom button about 15 seconds "asus logo and reboot bootloader message apears" then a green android with a "!" symbol appears.
3. swipe on the screen
4. a bootloader menu appears, then swipe up or down until "Clear cache" is selected, then swipe right.
5. after is done swipe to select "reboot to sytem" swipe right and you're done.
Many problems fixed even the google assistant lag.
1. Works good, no issue
2. Works good, no issue
3. Battery almost same as 1.5
The rest i do not use or no problems with.
Annoying : swipe left change to change watchface. I do not like it this way
I received my watch off of Amazon two days ago, let it go through it's initial updates and then took the 2.0 update. It seemed to be working okay, but I did an FDR as I often do after major updates and it completely screwed the watch up. It reboots every five minutes now.
I unlocked the bootloader, downgraded back to 1.5 and tried the process over again to no avail. Not sure if it was the upgrade or just a dud watch, but I'm glad I'm still within my return policy deadline.
mkengel said:
None of them, except for keyboard symbols.
All the same issues until I clean the cache.
1. Turn off the watch
2. Press the main and bottom button about 15 seconds "asus logo and reboot bootloader message apears" then a green android with a "!" symbol appears.
3. swipe on the screen
4. a bootloader menu appears, then swipe up or down until "Clear cache" is selected, then swipe right.
5. after is done swipe to select "reboot to sytem" swipe right and you're done.
Many problems fixed even the google assistant lag.
Click to expand...
Click to collapse
I did this now, if it fixes the bugs listed, well, fantastic.
mkengel said:
None of them, except for keyboard symbols.
All the same issues until I clean the cache.
1. Turn off the watch
2. Press the main and bottom button about 15 seconds "asus logo and reboot bootloader message apears" then a green android with a "!" symbol appears.
3. swipe on the screen
4. a bootloader menu appears, then swipe up or down until "Clear cache" is selected, then swipe right.
5. after is done swipe to select "reboot to sytem" swipe right and you're done.
Many problems fixed even the google assistant lag.
Click to expand...
Click to collapse
I did this too. Helped with a lot of the lag issues
I've tried this and still having terrible battery after wear 2.0 upgrade. I can barely make it through a day.
c_86 said:
I did this too. Helped with a lot of the lag issues
Click to expand...
Click to collapse
I recommend doing what @artur777 explains bellow, it fixed some of the issues for me, to the point where I'll no longer go back to AW1.5, even so, some bugs persist and won't be solved by the factory reset.
Hi Everyone,
I highly recommend doing a factory reset (see my post from 2017/07/24). It solved many problems for me and the watch OS works now like brand new! Give it a try and maybe it will do the trick for some of you too. It will definitely not make things worse, I think.
You can restore your watch OS to the factory settings either on your watch or on your phone through the Android Wear app:
On the watch:
Settings -> System -> Disconnect & reset
On the Android Wear app (phone):
Settings -> tap ASUS ZenWatch 3 under Device settings -> UNPAIR WATCH (at the bottom of the screen)
The process of resetting your watch will take a while until your watch is ready to be paired with your phone again. In my case it took about 15 minutes, so don't panic if it takes too long.
Mind that unpairing your watch from your phone will reset it to the factory settings and delete all the apps and settings you had configured on your watch. The fatory reset will NOT roll your watch OS back to AW1.5 though, but it will flash the AW2.0 to it's original state as if it were freshly installed on a brand new device.
Once the watch OS has been successfully restored (you should see this on the screen) you will need to pair your watch with your phone again through the Android Wear app and re-install all the apps and set the settings up to your liking and preference.
Good luck to everyone!
When i press the do not disturb option the phone does not turn silent where in 1.5 it used to make it silent...any suggestion?
One more Bug
Reminders notification, marked as complet, causing not to be seen in watch or phone. In some exceptions when there is a bad comunication with phone the reminder stay a few seconds.
Google is aware of this bug, and they are working on it with a promise to fix it soon with an update to their google app. (Working right in wear 1.5).
By the way many bugs listed, happen to me, but were fixed with a factory reset in watch, unpair and erase (forget any bluetooth reference) and clear dalvik cache in phone.
Some things doesnt improve immediately like google now or battery.
But I have to say that I own a zenwatch 2 too. Recently updated to wear 2.0 and it works better maybe in every task by example google now, speed downloading apps and battery so far (today from 8:15 to 22:05 65 % available, screen always on brightness level 3, 21 notifications and 1 hour monitoring google fit activities, 3 apps updated (13 MB))
So I think Asus need to put attention on whats going on.
I will make a comparison video in 2 days. Zenwatch 2 vs. Zenwatch 3 both android wear 2.0
Have a good time
My watch is not updating the day and date on the watchface unless I change watchfaces or reset the watch. I.E: It's saturday and it shows Friday. It will keep showing Friday for days unless I change watchfaces or reset.
Does anyone else have this problem as well?
battery drain formost!
my battery drains very fast. Faster than aw 1.5
---------- Post added at 02:52 PM ---------- Previous post was at 02:49 PM ----------
battery drain totally unacceptable in AW 2.0
MK24ever said:
Bugs I noticed so far, please check if you can reproduce these yourself and let us know yours so we make a list. This is a thread I started on Asus forums and it might help ppl here to to iron some of these out.
1- After a call (accepted or not) the blue MIC image stays on the watch even after the call has ended (this happened on AW 1.5 already) - Multiple reports
2 - Watch vibrates non-stop during a call, even if you picked the call allready on the phone, the watch will start vibrating with no reason. - Multiple reports - SUPER ANNOYING!!!
3 - Battery drains much faster, with same usage I end a day with 30% on AW 2.0 instead of 65 to 70% on AW 1.5 - Multiple reports
4 - When not trough Wifi the "ok Google" command gives an error saying Google is out of reach, restarting phone fixes it, but if connection of phone and watch is broken, the "OK Google" voice command (or long-pressing the main button) won't work again, nor will other apps like the App store - Multiple reports
5 - if I pick one phone number with the "text message' icon, the watch does not go into listening mode to get the text content. Instead it keep on loading with the loading icon and no message can be sent out. However if I use "OK Google" command instead of go thru the Contact app I can send text messages - One report
6 - Turning theater mode on seems to break the alarm. Thankfully the alarm will still go off, but the screen becomes unresponsive. Clicking dismiss or snooze won't work. Restart of watch is needed. Only happens when the watch is in theater mode. - One report
7 - Huge delay when phone receives a call to when watch shoes that call. - Multiple reports.
8 - Dowload speed on watch is most of the times terrible slow - Multiple reports
9 - "Ok Google" actions takes much longer to activate than on previous version - Multiple reports
10 - WhatsApp-ing someone is impossible it keeps asking "to whom?" indefinitely. - One report
11 - Pairing seems to be having problems - One report
12 - UI losing frames - One report
13 - Keyboard missing some symbols - Multiple reports
Click to expand...
Click to collapse
Doing a factory reset will solve many of the issues mentioned, specially the battery drain, I suggest you to do a factory reset and do the initial setup, then leave the watch on charge overnight, the next day restart both your phone and your watch (don't take the watch of the charger yet), wait 20 minutes and then unplug the watch from the wall and just use it as usual, you should see a huge battery improvement. I did.
I have seen some of these issues on my watch running AW 2.0.
The delay with the calls is the most annoying one. Also if u have wrist gestures on and u turn your wrist when the Call Ui is up, the gestures removes the notifcation and u have to answer call on phone.
I experience another bug. I have a pattern password set on my watch and I placed watch in Eco mode. After the watch is locked in Eco mode, the screen is unresponsive to enter the pattern and none of the buttons work. A restart is neccesary.
Also. I have disabled Smart replies, yet whenever i go in whatsapp chats there are atleast 5 smart reply otions.
hi all, just got this watch, so far so good. only problem is that my watch does NOT notify me when I have an incoming call - except if I set the watch to play voice on incoming call. I'd rather not do this, just the straight up notification. does anyone know how I can adjust this? thanks!
---------- Post added at 08:57 PM ---------- Previous post was at 08:38 PM ----------
jco23 said:
hi all, just got this watch, so far so good. only problem is that my watch does NOT notify me when I have an incoming call - except if I set the watch to play voice on incoming call. I'd rather not do this, just the straight up notification. does anyone know how I can adjust this? thanks!
Click to expand...
Click to collapse
Disregard, it works now.
I had to give full permission to Android Wear.
Sent from my DROID Turbo using XDA-Developers Legacy app
Hello friends!!
Someone has been able to resolve incoming call delay
MK24ever said:
Doing a factory reset will solve many of the issues mentioned, specially the battery drain, I suggest you to do a factory reset and do the initial setup, then leave the watch on charge overnight, the next day restart both your phone and your watch (don't take the watch of the charger yet), wait 20 minutes and then unplug the watch from the wall and just use it as usual, you should see a huge battery improvement. I did.
Click to expand...
Click to collapse
What do you recommend to do factory restoration ?; only "clear data" or "Factory reset", help me pls
Davis26 said:
What do you recommend to do factory restoration ?; only "clear data" or "Factory reset", help me pls
Click to expand...
Click to collapse
You can restore your watch OS to the factory settings either on your watch or on your phone through the Android Wear app:
On the watch:
Settings -> System -> Disconnect & reset
On the Android Wear app (phone):
Settings -> tap ASUS ZenWatch 3 under Device settings -> UNPAIR WATCH (at the bottom of the screen)
The process of resetting your watch will take a while until your watch is ready to be paired with your phone again. In my case it took about 15 minutes, so don't panic if it takes too long.
Mind that unpairing your watch from your phone will reset it to the factory settings and delete all the apps and settings you had configured on your watch. The fatory reset will NOT roll your watch OS back to AW1.5 though, but it will flash the AW2.0 to it's original state as if it were freshly installed on a brand new device.
Once the watch OS has been successfully restored (you should see this on the screen) you will need to pair your watch with your phone again through the Android Wear app and re-install all the apps and set the settings up to your liking and preference.
MK24ever said:
You can restore your watch OS to the factory settings either on your watch or on your phone through the Android Wear app:
On the watch:
Settings -> System -> Disconnect & reset
On the Android Wear app (phone):
Settings -> tap ASUS ZenWatch 3 under Device settings -> UNPAIR WATCH (at the bottom of the screen)
The process of resetting your watch will take a while until your watch is ready to be paired with your phone again. In my case it took about 15 minutes, so don't panic if it takes too long.
Mind that unpairing your watch from your phone will reset it to the factory settings and delete all the apps and settings you had configured on your watch. The fatory reset will NOT roll your watch OS back to AW1.5 though, but it will flash the AW2.0 to it's original state as if it were freshly installed on a brand new device.
Once the watch OS has been successfully restored (you should see this on the screen) you will need to pair your watch with your phone again through the Android Wear app and re-install all the apps and set the settings up to your liking and preference.
Click to expand...
Click to collapse
I appreciate your help, do not recommend doing it from the boot loader?
Again thank you