Firmware Version - Galaxy Camera Q&A, Help & Troubleshooting

Is this the most up to date firmware for UK
Version 4.1.2
baseband - gc100xxbmc3
build number - jzo54k.gc100xxbmc4

Related

Another question for UK unbranded XEU users

Now everything is dying down and people have had time to re-setup and play with their Froyo. Can you tell me if all the XEU phones were upgraded to the same version as I have heard some are different to others.
Mine is as follows.
On phone;
Model GT-i9000
Firmware version 2.2
Baseband version I9000XXJPP
Kernal version 2.6.32.9 [email protected] #1
Build number Froyo-XXJPO
in reg;
HIDSWVER I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO
Productcode GT-I9000HKDXEU
Software revision I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO

[Q] please help Can not update galaxy note

i have a galaxy note once rooted i then found out about (ICS) so i came on this site and found a post with a bunch of stock roms on it and used one to flash my phone back to a stock unrooted state its all working 100% fine except one thing. i can not update my firmware through the phone and-or kies. It says your device does not support software upgrading via kies any help would be much appreciated
i used ODIN to flash the firmware and a Rom from this post
http://forum.xda-developers.com/showthread.php?t=1424997
i used this ROM - N7000XXKKA ------ 2.3.6 2011 November------- N7000CPWKK3 -----------United Kingdom (Carphone Warehouse)----- Download
as i live in the UK
my phone is now running
android version : 2.3.6
base band version N7000XXKK5
Kernel version
2.6.35.7-N7000XXKKA-CL726566rootELL87#2
build number Gingerbread.XXKKA
added info
PDA: N7000XXKKA
PHONE: N7000XXKK5
CSC: N7000CPWKK3
try to flash a rom from the category Latest Not Directly Rootable - see post#2 & #3 that says open (europe or another country).Yours is locked in a network from what i understand.Try a OPEN ROM,it is not locked and it should work.
good luck and let me know what you did.

[Q] gt-s5830bvkt4

i have galaxy ace gt-s5830OKAORA fully unlocked.
pda s5830bvkt4 phone s5830bvkt4 csc s5830orakt1 gingerbread 2.3.6 now i want to unbrand it from orange and turn it back to stock can i flash it using the (United Kingdom / Ireland - 2011 September - 2.3.6 - S5830XWKPY - S5830XEUKP1 ) firmware on the sammobile.com firmware page. If i can what is the best way of going about this. thanks in advance
Confused
Please Please Please can someone tell me whats going on, i flshed the above one file flash from sammobile and all went ok phone rebooted debranded etc lovely.
now on sam mobile they have two files within a few days of each other with exact same details:
GT-S5830 - United Kingdom / Ireland - 2011 24th September - Android 2.3.6 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.6
S5830XWKPY_S5830XEUKP1_XEU.zip
and
GT-S5830 - United Kingdom / Ireland - 2011 1st September - Android 2.3.3 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.3
S5830XWKPY_S5830XWKPA.zip
yet both files are identical
i Factory reset/ clear cache then flashed the S5830xwkpy_s5830xeukp1_xeu (24th 2.3.6)---->
result check phone info after reboot and Factory reset/ clear cache and it says gingerbread 2.3.3
very confused
i would just like to know if it was some thing i did or if both files are i fact 2.3.3
the phone i flashed was origially
PDA:S5830BVKT4
PHONE:S5830BVKT4
CSC:S5830ORAKTI
fully unlocked
amiga72 said:
Please Please Please can someone tell me whats going on, i flshed the above one file flash from sammobile and all went ok phone rebooted debranded etc lovely.
now on sam mobile they have two files within a few days of each other with exact same details:
GT-S5830 - United Kingdom / Ireland - 2011 24th September - Android 2.3.6 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.6
S5830XWKPY_S5830XEUKP1_XEU.zip
and
GT-S5830 - United Kingdom / Ireland - 2011 1st September - Android 2.3.3 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.3
S5830XWKPY_S5830XWKPA.zip
yet both files are identical
i Factory reset/ clear cache then flashed the S5830xwkpy_s5830xeukp1_xeu (24th 2.3.6)---->
result check phone info after reboot and Factory reset/ clear cache and it says gingerbread 2.3.3
very confused
i would just like to know if it was some thing i did or if both files are i fact 2.3.3
the phone i flashed was origially
PDA:S5830BVKT4
PHONE:S5830BVKT4
CSC:S5830ORAKTI
fully unlocked
Click to expand...
Click to collapse
Do you know the baseband version of your device?
Sent from my GT-S5830 using xda premium
AndroidMasters said:
Do you know the baseband version of your device?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Before flashing when it was on orange it was
Baseband Version:
S5830BVKT4
Kernal Version:
2.6.35.7-perf-CL816932
[email protected]#1
Build Number:
Gingerbread.BVKT4
Now After Flashing Stock XEU (which was ment to be 2.3.6) it is
BaseBand Version:
S5830XWKPA
Kernal Version:
2.6.35.7-perf-CL561786
[email protected]#1
Build Number:
Gingerbread.XWKPY
If i check on kies it says the software is the latest.
amiga72 said:
Before flashing when it was on orange it was
Baseband Version:
S5830BVKT4
Kernal Version:
2.6.35.7-perf-CL816932
[email protected]#1
Build Number:
Gingerbread.BVKT4
Now After Flashing Stock XEU (which was ment to be 2.3.6) it is
BaseBand Version:
S5830XWKPA
Kernal Version:
2.6.35.7-perf-CL561786
[email protected]#1
Build Number:
Gingerbread.XWKPY
If i check on kies it says the software is the latest.
Click to expand...
Click to collapse
www.themythace.com
Go to that site and download the firmware of your region what have or your phone originally what have.and flash it from odin.these are the firmware that unrooted and original files.
But why you have to that firmware?
I mean many boatware and some unwanted files are in that firmware which makes your phone a little slow down.
Try stocklite 7 its a stock rom and much better battery life and performance.
Hit thanx if i helped you.
Sent from my GT-S5830 using xda premium
My wife likes the stock xeu firmware it was a one package full write and phone is working lovely, i had a look at myth but not ready to start playing with roms just yet. i just wanted to know if the xeu firmware i flashed is definately 2.3.3 , i managed to answer my own question as i download both files 2.3.6 and 2.3.3 and did a binary compare and both files were identical so i guess the xeu version of 2.3.6 hasn`t been released yet.

[Q] Basebands version for 9.8.2I-50_SML-29

Is there a list of all baseband firmwares available for XT890?
I'm now using SUNRISE_SMB_REV30_V2_R3_ENZO_1251.B_SEC baseband.
I have changed firmware from EU retail to Brasil retail (9.8.2I-50_SML-29), bud didn't change baseband firmware.
Any suggestion for baseband version that works well with 9.8.2I-50_SML-29? Should I move to C9 firmware?
Thanks!

Is new Hong Kong firmware OZSMG2 safe to flash?

I found new firmware for Hong Kong in sammobile. Is that safe to flash because I heard chinese fw can brick our phone from different regions.
Android Version : 4.1.2
BaseBand : I9070OZSMG2
Built Date : 11 July 2013
phyowaiummg said:
I found new firmware for Hong Kong in sammobile. Is that safe to flash because I heard chinese fw can brick our phone from different regions.
Android Version : 4.1.2
BaseBand : I9070OZSMG2
Built Date : 11 July 2013
Click to expand...
Click to collapse
I have just seen this new update on sammobile..the build date is almost new..11th july.
The old hong kong fw caused bricks....IDK this version://
If someone try it out...we are grateful
upppppppppppppppppppppppp

Categories

Resources