Related
So I fanally got my Kaiser yesterday And It kicks @$$ XD
I live in Mexico, So it is an unlocked unit, and it recognized my local cel network as soon as I turned it on with the local carrier's sim (telcel).
One problem though: I can receive calls, but not make them... after dialing, I get the call dropped about 5 seconds later without tone that says "Call Ended" with time 00:00.
Anyway to fix this =(
I've tried the search and nothing popped out. Thanks! =)
- Jim
Sure
Welcome to AT&T.
I left verizon (due to their crippled hardware). I get virtually no signal in various parts of L.A. including my home. You place a call, their signal goes to zero, your call ends.
At least that's my 0:00 story.
I would like to reply to this...because I've been having this problem with AT&T consistently since I've come back to school (I go to school at Texas A&M in College Station)
I guess I could copy and paste a lot of stuff about it, because I've done a lot of posting about it on AT&T's forums...but I'm too lazy so I'll just put the link.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=76225&jump=true
My problem, however, is that when I have this condition, I cannot make OR receive calls (received calls go to voicemail, and although I see that I have a missed call or a voicemail message...I can't call the voicemail or I get Call Ended 00:00)
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
I hope my topic on AT&T's forums has some helpful information
Subversive Asset 2.0 said:
I would like to reply to this...because I've been having this problem with AT&T consistently since I've come back to school (I go to school at Texas A&M in College Station)
I guess I could copy and paste a lot of stuff about it, because I've done a lot of posting about it on AT&T's forums...but I'm too lazy so I'll just put the link.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=76225&jump=true
My problem, however, is that when I have this condition, I cannot make OR receive calls (received calls go to voicemail, and although I see that I have a missed call or a voicemail message...I can't call the voicemail or I get Call Ended 00:00)
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
I hope my topic on AT&T's forums has some helpful information
Click to expand...
Click to collapse
It sounds like the information on your SIM card could use an update.
Call AT&T and ask them to send an OTA to your SIM. If you don't have a current IRDB, your phone may not be picking up the correct tower or signal in your area.
I am not actually using it with AT&T... I use it with Telcel, a Mexican Cell Phone Network Service Provider, because it is where I live =).
Anyway, got it to work after a while. I went to Settings (Personal tab) > Phone > Services
I updated the data there; I also "re-found" my network in the network tab, but I'm pretty sure the first procedure got it going.
Tanks for your time.
When my phone was working, I tried to call AT&T locally, but they didn't know what was going on and didn't find anything wrong with the "network"
Subversive Asset 2.0 said:
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
Click to expand...
Click to collapse
Under phone settings, there is a tab titled "band" (assuming you have it set to be shown, i think kaiser tweak/ reg editing can expose it) that you can switch between gsm and wcdma (G/E or 3g/H). I had that same problem when i first got my phone. i changed out sim cards a time or 2 and finally got everything working when i manually set the radio to one or the other. I've updated the radio a few times since then, but i still keep the switching manual, in an attempt to conserve battery power (I only need 3g/H when i'm online).
The problem with that is that AT&T branded Tilts never have this tab "band" and kaiser tweak doesn't expose it (I don't know what specific registry edit would expose it)...so I can't just switch between gsm, umts, etc.,
** Of course, I didn't check for an updated version of kaisertweak. One of the topics says it hasn't been updated in a while even though it has?
Yes, even WITH the latest version of kaisertweak and the latest version of the XML, turning on band (and then softreseted to make the options stick) does not make a "band" tab
Subversive Asset 2.0 said:
The problem with that is that AT&T branded Tilts never have this tab "band" and kaiser tweak doesn't expose it (I don't know what specific registry edit would expose it)...so I can't just switch between gsm, umts, etc.,
** Of course, I didn't check for an updated version of kaisertweak. One of the topics says it hasn't been updated in a while even though it has?
Yes, even WITH the latest version of kaisertweak and the latest version of the XML, turning on band (and then softreseted to make the options stick) does not make a "band" tab
Click to expand...
Click to collapse
curious, did you run the decert cab to allow unsigned code to run on your phone? could that be stopping changes from occuring?
heh, time to jump into the 'VOID' then? hardspl it and join the ranks of those who haven't bricked their phones yet! I guess i was lucky to have the band tab on the htc version.
I'm not sure how I would even know if I've run the decert cab or not?
Even though I guess this is the namesake of the site, I wouldn't want to change my ROM even though the AT&T ROM is doubtlessly inefficient as (insert inefficient thing here). To me, unless I know why the problem is happening, then attempting any solution seems counterintuitive (like giving the man the fish instead of teaching him).
So AT&T suggested just randomly sending a new SIM card (yet I know from other people's experiences that that doesn't necessarily end the problem) and AT&T has suggested to others that they get a new device (which has also not necessarily ended the problem.) These are just as shallow solutions until I know why the problem exists in the first place.
Jimmyy said:
So I fanally got my Kaiser yesterday And It kicks @$$ XD
I live in Mexico, So it is an unlocked unit, and it recognized my local cel network as soon as I turned it on with the local carrier's sim (telcel).
One problem though: I can receive calls, but not make them... after dialing, I get the call dropped about 5 seconds later without tone that says "Call Ended" with time 00:00.
Anyway to fix this =(
I've tried the search and nothing popped out. Thanks! =)
- Jim
Click to expand...
Click to collapse
Hey Jim,
I wonder how no one has pointed it out till now, but MAYBE it could be a problem with the Radio rom in ur phone.
Have u tried upgrading to a different RADIO? do u know which version it is?
The following radios have been doing great with ppl around here...
1.27.12.17
1.27.12.32
You can download them from here:
http://forum.xda-developers.com/showthread.php?t=349375
Try flashing one of the above mentioned and see if that solves ur problem!
hope this helps!
I guess you were addressing Jim, but I think I simply need to know if 1.27.12.11 for Radio is a known faulty radio (because that's the radio *I* have...so if other people know it to be faulty, then that's great for research)...and why? If so, then that would be the reason why it doesn't work (which is what I'm looking for) and then I'd be willing to switch easily.
But not before then.
Checking the radios topic, it seems as if no one reports a problem with 1.27.12.11
so...I don't know if switching is going to fix anything
I'm putting my problem on hold...it seems like it can transition better now and call out or receive calls better.
I've had the same problem with Telcel until I upgraded my SIM card to a 4.0.
The replacement costs $110 pesos (about $10 USD) and it's a quick and painless procedure!
Note: I still get the occasional call drop, but it improved things dramatically.
Try it out!
Cheers from Tijuana!
Rayan
my friend, I have the same radio 1.27.12.11
and the same problem.
I just found this topic searching why my phone do not work at 80% of the time, the mobile provider here in argentina recently told me "your phone have a problem" so I'm in crisis.
Let'see what happen updating the rom / radio / etc !!!
Hi,
I have had the HD7 for a few weeks now... before the nodo update i never had a problem with it but ever since then, i keep getting a lot of error messages for text messages saying the message wasn't sent. This usually happens when the signal is 1 bar or no bars (but signal is still there) and sometimes even happened with full bars.
Anyone else have this problem? I am with Bell in Canada
same also with hd7 in tmo usa
same problem 02 UK
However ive found that if i go into the settings and into the carrier options and switch off 3g, everything works fine , texts are sent and received and i have no issues
this problem seems to come and go for me so im presuming its the same deal that you have - when the 3g signal is low its unable to connect correctly - and since it has a 3g signal it dosent auto downgrade to the lower speed connection - so manually disabling 3g forces it to connect at the slower speed
hope this helps a little
feel free to tell me im talking bollocks tho - this is just my experience of the problem
No message errors here on O2 UK. I've had the HD7 since release & use messaging a lot. I don't get a 3g signal in my area, so that might be a factor.
Sent from my HD7 using XDA Windows Phone 7 App
Hey mate...Bell in Toronto area here. I've been getting the same thing, rather often tiotoo A few times I think it was due to receiving a text the same time or very shortly after trying to send one..it's weird though, pretty much every time I click to resend it goes no problem. You're not alone with that issue mate lol
phew ok awesome then... it hasnt been doing that for me ever since i started this thread lol, so i am a little happy for now... i am going to send off emails to bell and HTC and see what they say regarding this issue.
As per the 3G connection trick, as soon as i turn mine off, i lose all signal from the phone... the dialer just says "emergency only".
Thanks
saketh321 said:
phew ok awesome then... it hasnt been doing that for me ever since i started this thread lol, so i am a little happy for now... i am going to send off emails to bell and HTC and see what they say regarding this issue.
As per the 3G connection trick, as soon as i turn mine off, i lose all signal from the phone... the dialer just says "emergency only".
Thanks
Click to expand...
Click to collapse
I think it is a network issue. I'm on Telus (sharing towers with bell) and I have this problem on my HD7 and Galaxy S. Only in the last couple weeks.
I have to keep resending texts
Blue1k said:
I think it is a network issue. I'm on Telus (sharing towers with bell) and I have this problem on my HD7 and Galaxy S. Only in the last couple weeks.
I have to keep resending texts
Click to expand...
Click to collapse
Oh yeah that's right... i forgot Bell and Telus dont have edge bands. Hopefully the text messaging thing can be fixed soon... its getting annoying now.
I've been having the same problem. I used to send text messages in the loo's on my break, but now if I go there the signal is weaker and it fails alot. never used to before nodo.
This has been an issue for me since Day 1. My college is in a low coverage area and anytime im here, i sometimes get the error message.
I dont pay it much mind because if my phone is showing 1 bar or no bars, then it is obviously not the phone's fault(in my case) but the fact that I am just in a low coverage are and it struggles to get the message out.
This happens more so with my pic message than text message.
Sometimes people have also told me they have text me and I never received it or I'll text them and they never receive it.
carmeng4evr said:
This has been an issue for me since Day 1. My college is in a low coverage area and anytime im here, i sometimes get the error message.
I dont pay it much mind because if my phone is showing 1 bar or no bars, then it is obviously not the phone's fault(in my case) but the fact that I am just in a low coverage are and it struggles to get the message out.
This happens more so with my pic message than text message.
Sometimes people have also told me they have text me and I never received it or I'll text them and they never receive it.
Click to expand...
Click to collapse
did you check with anyone else in t-mobile that goes to your college? I do remember reading where people are complaining the hd7 has a weak antenna.
But even then so, 1 bar is no excuse for a text message to not go through.
I have the same problem. my phone will have full bars one moment then the next it will be down to one and "cant send: text message error" its annoying because i will reply and then look at my phone a hour later and see why they havent replied and the message didnt even send >_<
Some other times my phone get NO signal at all for a couple minutes then randomly has full bars again, its really irritating. I live in a college town where everyone here gets good signal.. no reason for this. I dont really remember it happening when i had the February update.
Ok so i sent HTC an email and this is the reply I got.
I understand that since performing the nodo update on your HTC HD7, you have been having issues sending text messages. I checked around with several of my coworkers and tried to find other instances of this issue occurring from other forums, but it appears to be a fairly uncommon issue. I took a look at the forum thread that you started and obtained more details such as this usually tends to happen when there is low signal. I see that some of the other posters recommended reverting to 2G in such a situation and that is not a bad idea. You can enable 2G only by going to Settings> Cellular. Additionally, the way you hold the phone can affect the signal as well. You may want to try holding around the sides so that your palm does not come in contact with the back of the phone, which can block the signal. Aside from that, you can also try a factory reset in case an issue occurred during the update and did not install properly or caused corruption in some of the files in the phone’s software. Please be sure to back up the information on your phone and the go to Settings> About Phone> Factory Reset.
To send a reply to this message or let me know I have successfully answered your question log in to our ContactUs site using your email address and your ticket number 11CACW17ENA000115.
Sincerely,
Lydia
HTC
I'm glad I am not the only one having this issue. (T-Mo USA) Mine started acting up last night with my 3G being EXTREMELY slow loading web pages and then ultimately not being able to load anything. Then this morning I am unable to send text messages, but randomly I will receive many emails and texts (like I only have a connection for a few seconds), then when I try to reply I am unable to send. Very frustrating.
i too have experienced this so here are some tips. For me i only get this problem when pressing send and right away press the home key or back key which interrupts the sending process result of fail sending. Enabling 3g if you dont have it is another problem so disable it. I also get this problem when locking the phone right after i press send so wait till it finish and then lock .
i hope this helps, if not restart the phone, and if that doesnt help take it to tmo and exchange =)
I've had this problem on my Omnia 7 since day one. Always have to disable my damn data.
And the ***** of it is when I go to re-enable data afterwards I have wait a few minutes to get it working again. Sometimes I have to turn the phone off and on in order to get data.
It's not a cell carrier problem since on my Diamond 2 I never had a problem, and the same thing with the x10.
Same problem with Samsung Focus on Bell. After NoDo update, SMS has been useless. I will get SMS, although often late. Sending is worst, I get the dreaded 'cannot send' message. I will occasionally be able to send some. Wondering if it's a signal issue. However, I can send just fine putting my SIM in another phone.
I've had T-mobile HD7 since last november, my girlfriend and I exchange about 30 messages every day, never had this problem before the NoDo update, not even once, no matter how bad the signals were. Im 99% sure its NoDo update causing this not t-mobile network. It's so annoying when you text somebody then go do something else, 20 minutes later you check back and see this un-happy face and can't send message.
BTW, Factory Reset won't help, tried that.
seantan2001 said:
I've had T-mobile HD7 since last november, my girlfriend and I exchange about 30 messages every day, never had this problem before the NoDo update, not even once, no matter how bad the signals were. Im 99% sure its NoDo update causing this not t-mobile network. It's so annoying when you text somebody then go do something else, 20 minutes later you check back and see this un-happy face and can't send message.
BTW, Factory Reset won't help, tried that.
Click to expand...
Click to collapse
yeah tried that too man... WPcentral wrote an article asking other people if they are having that issue and it seems some are and some arent.
http://www.wpcentral.com/sms-issue-hd7-Nodo
It will happen occasionally if I'm on Edge network. If I have a solid 3g signal it never happens.
I recently switched from an iPhone 5 to the One Dev Edition. After having some signal issues, I went to AT&T, got a microSIM, they switched me an Android data plan, etc. But I'm still having an issue where I can't reliably send and receive calls, especially from my desk at work. I can dial the number and hit Call but that's it. No ringing, nothing. Just dead air, then the "call" ends. If the call does go through, I can hear the other person but they can't hear me. Same thing when receiving a call. I'll hear them but they can't hear me. Sometimes my phone won't ring and it just rolls to voice mail. I can see the signal switching from LTE to H, etc, and I have practically full bar strength. I just don't understand why the calls aren't going through.
Is this an issue with the phone itself? Something with AT&T? Is there a newer radio firmware I can try flashing? I didn't have any issues with the iPhone 5, and I even had my coworker put his iPhone into field test mode so we could compare the numeric signal and they're about even, though the iPhone usually does have a slightly better db signal. I really like the One but not being able to send or receive calls while at my desk is a deal breaker.
Thanks!
From the sounds of it, you are running the stock firmware still? Any root or other possible modifications? If you answered Yes then no to those questions, I would head back to the AT&T store and have them try it out, if anything they should be able to take your SIM card and put it into another Android device and see what happens.
What about text/data, do those work?
You said mainly at your desk you notice this issue, so does that mean it happens at other places as well, same symptoms (full bars, allows to send call then nothing?) You may just be the lucky contestant with a defunct unit, HTC should be able to help you out.
I would suggest first going to AT&T store, try out their suggestions, then if anything give HTC a call/email to see if they can be of any help. At this point I would stay away from flashing custom radios as they may void your warranty then you will really be up $hit creek.
Sounds like att.
I had this problem with tmobile once. The signal wasn't strong enough and it wouldn't call.
Some please are spotty.
Something is wrong with your phone. That should be obvious. Of course the vast majority of people who got this phone can reliably make and receive calls or it would be the biggest mobile phone bust in history.
Sorry to be blunt but you already know it's not the signal so it has to be a defect in the phone.
Thanks for the suggestions. This is the stock Dev Edition ROM. I haven't made any changes other other than just installing apps.
I haven't made a lot of calls but I don't seem to have an issue any where else.
No issues with LTE. Data has been fine.
I wasn't sure if AT&T would assist since this is the Dev Edition but that's worth a shot to have them run some tests on it. Otherwise I'll try to get a replacement (or refund) from HTC.
Thanks!
Sent from my HTC One using xda premium
First of all, I want to say that I found people with the same issue using Android everywhere and with a lot of different phones, so it's probably an Android bug rather then Moto X itself, but I wanted to leave my report.
I came from an S3, which suffered from the same problem when using Cyanogenmod. When using official Samsung ROM everything worked as it should. Now, I'm getting the same issue on my brand new Moto X.
When I try to call someone, sometimes it just doesn't call, after I press the dial button, it just hangs (without ringing) and finished the call with a "Cal ended" message. It happens randomly, and sometimes I can't call anybody for like 2/3 hours.
The simcard has been changed from the S3 (micro) to the Moto X (nano), so it's probably not it. Also, with the Samsung ROM it didn't happen.
I can still receive calls and messages, and the signal strength is fine most of the time. I just can't call.
Today I faced this problem and then I tried calling from my girlfriend smartphone (samsung ace IIx) at the same time, which is from the same carrier, calling to the same number, and it just worked fine. Mine still didn't work though.
Here is a thread on people on xda facing the same problem, but with a different phone: http://forum.xda-developers.com/showthread.php?t=2351227
Don't know what to do.
i've had the call not go through as you've described, but have never had a phone not let me place "any call" afterwards. i always chalked it up to poor performance (limited RAM, too many processes, etc). My DROID3 would do it and often times when it finally did make a call, there was zero sound and I would have to reboot the phone.
640k said:
i've had the call not go through as you've described, but have never had a phone not let me place "any call" afterwards. i always chalked it up to poor performance (limited RAM, too many processes, etc). My DROID3 would do it and often times when it finally did make a call, there was zero sound and I would have to reboot the phone.
Click to expand...
Click to collapse
Hmm, it doesn't seems like poor performance. I ended up every task and it still happened.
However, I noticed that when I check the "2G ONLY" option it comes back to work. Maybe it's something with the HSPA/HSPA+ connection.
it could be completely carrier dependent then. my experience has been with vzw.
Moto X "Call Ended"
I have experienced this same problem in Houston on the T-Mobile network after switching over to Android. My T-Mobile rep told me they have had towers vandalized for copper which has impacted service for them, I believe he said it was about 15 towers and 10K a pop to get things corrected. What gets me is I was on a Bold 9900 and while I had signal problems in the affected areas of town I didn't not experience the "call ended" issue. I can also call other T-Mobile phones from those same areas but not land lines so to me this seems like a possible network routing issue which I have seen before between specific carriers.
If the problem does continue I may have to switch carriers. T-Mobiles service was previously outstanding in Houston but recently had not been great after the 4G LTE upgrades. I support multiple hospitals and need service to work correctly and will work with the T-Mobile Engineers to see if I can make headway on that front. I noticed another MotoX user reporting he only had the issue when flying in to Houston for work and that everything worked for him outside of Houston. His solution was to operate in 2G mode which for me is really not an option. I have to handle a lot of tasks over the network while on calls.
Anyways I would appreciate it if others could post if they are experiencing these issues and give as many details as possible so we can try to isolate the root cause of this problem and if found to be a carrier issue we can escalate with them. Thanks
dicarli said:
First of all, I want to say that I found people with the same issue using Android everywhere and with a lot of different phones, so it's probably an Android bug rather then Moto X itself, but I wanted to leave my report.
I came from an S3, which suffered from the same problem when using Cyanogenmod. When using official Samsung ROM everything worked as it should. Now, I'm getting the same issue on my brand new Moto X.
When I try to call someone, sometimes it just doesn't call, after I press the dial button, it just hangs (without ringing) and finished the call with a "Cal ended" message. It happens randomly, and sometimes I can't call anybody for like 2/3 hours.
The simcard has been changed from the S3 (micro) to the Moto X (nano), so it's probably not it. Also, with the Samsung ROM it didn't happen.
I can still receive calls and messages, and the signal strength is fine most of the time. I just can't call.
Today I faced this problem and then I tried calling from my girlfriend smartphone (samsung ace IIx) at the same time, which is from the same carrier, calling to the same number, and it just worked fine. Mine still didn't work though.
Here is a thread on people on xda facing the same problem, but with a different phone: http://forum.xda-developers.com/showthread.php?t=2351227
Don't know what to do.
Click to expand...
Click to collapse
Call Ended Issue Resolved
Hi All,
I see this Call Ended Issue in many brands. So I assume the error is a combination of the Network along with the SimSlot.
I tried various combinations for my Moto-E mobile.
Before i post the solution i found, Let me provide a brief about the problem.
I use Vodafone network on sim1 slot and Uninor network on Sim2 slot. I started facing the call ended issue on my sim 1 vodafone network.
I inter changed the sim's and found the network working absolutely fine. This makes me to understand that the sim1 slot with the vodafone carrier has some network issue where that IMEI code has some problem.
i tried to place the vodafone sim again on the sim 1 slot and found the problem persists. So i came to that conclusion.
Hope this might help you and provide a instantaneous and temporary resolution.
Thanks,
Praveen.
Call Ended problem still going...
Hey,
I just rooted my Moto X (XT 1053), like 5 min ago, in the hope to fix this same problem. I`m no programer/developer and have nothing against rooting, I just don`t think I`m that kind of user. Anyway, about a week ago my phone started to drop my calls right after dialing. I restored factory settings, updated it and nothing worked. I took it for service and they offered to charge me 150 bucks to restore factory settings and update the software. So I was kinda forced to root and try to fix it this way. The problem is that I probably don`t understand half of what you guys say, so if there are any kind souls out there, please help me out.
To sum it up:
- No Sim Card error
- I get carrier services and can use mobile internet (3G because 4G is still too explensive here in Brazil)
- Directly drops my calls
- Won't receive calls
- Won't send or receive text messages via carrier (just over 3G or wifi)
I`ve tried another carrier's Sim Card, no go.
I`ve tried my Sim Card on another phone and it worked just dandy, so I really don`t think it`s carrier related.
I`m running Android 4.4.3, as the other updates weren`t available for my phone via Motorola. I thought maybe updating to a newer version of Android might do the trick. I just have no clue on how to do that on a rooted phone... or on a non rooted phone for that matter.
Can anyone give me any tips/pointers/etc... ?
Thanks!
I have the same issue with my moto x on Verizon. Have you been able to figure it out?
Hey guys, i have a problem with my signal, sometimes it passes from full signal to 2g, even though I'm in a full 3g covered area, and i lose connection in skype every few minutes while I'm on a video call.
I didn't have the problems before, that started today, i tried to re flash the Rom, hasn't solved it, my only concern that yesterday i have tried to charge the phone with the pogo pins, but instead of putting the - on the - and the + on the +, i have put it the wrong way, and the phone had shutdown, and then nothing happened, just that stupid and annoying problem!!!
is it have something to do with that? how can i fix it???
[email protected] said:
Hey guys, i have a problem with my signal, sometimes it passes from full signal to 2g, even though I'm in a full 3g covered area, and i lose connection in skype every few minutes while I'm on a video call.
Click to expand...
Click to collapse
I'm on O2 UK, this phone probably has the worst signal i've ever experienced. It'll regularly go from 4 bars to "x" (no signal) on and off all through the day, or it will say it has a full signal and my friends tell me they've been trying to call me all day & have sent me texts.
It's got to the point where I'm looking at selling the phone now, as it's fast becoming no use to me. It's not the network, I can sit next to a friend also on O2 UK with an iPhone and they can stream a youtube video, I can't even make an outgoing phone call (just goes BEEP BEEP BEEP and hangs up).
Shame, I love the features of the phone, but its useless if i cant receive phone calls or texts on it.
Its about 2 months old, never been rooted has all updates applied that have appeared (14.1.G.2.257 at the moment) and has had the awful signal problems since day one. If i knew it was going to be so bad I would have returned it, but left it too late (14 day return period)
Never happened at the moment.
Poor Signal
I am also having poor signal problems maybe someone could help with setting ideas??????????
micropizza said:
I'm on O2 UK, this phone probably has the worst signal i've ever experienced. It'll regularly go from 4 bars to "x" (no signal) on and off all through the day, or it will say it has a full signal and my friends tell me they've been trying to call me all day & have sent me texts.
It's got to the point where I'm looking at selling the phone now, as it's fast becoming no use to me. It's not the network, I can sit next to a friend also on O2 UK with an iPhone and they can stream a youtube video, I can't even make an outgoing phone call (just goes BEEP BEEP BEEP and hangs up).
Shame, I love the features of the phone, but its useless if i cant receive phone calls or texts on it.
Its about 2 months old, never been rooted has all updates applied that have appeared (14.1.G.2.257 at the moment) and has had the awful signal problems since day one. If i knew it was going to be so bad I would have returned it, but left it too late (14 day return period)
Click to expand...
Click to collapse
The signal fluctuation is most likely related to the aluminum sides(a reason why T-Mobile went with plastic).
Sent from my C6903 using Tapatalk