[Q] Noob question about splash screens and partitions - Sprint HTC One (M7)

Back when the Sprint m7 launched, I changed the splash screen by flashing a zip from this thread on the international side - [BOOTSPLASH] iElvis's Custom One Splash Screens [95+].
I've since updated the radios and firmware to the latest available, and in doing so, it looks like my splash screen changed also. I understand that there's a possible issue that could occur when flashing splash screen zips that were made for the international m7 on the sprint m7 relating to the partitions, and although this wasn't a problem a year ago, I seem to remember reading something about partitions changing on the sprint m7 a few updates ago. Am I able to just flash the same zip that I flashed a year ago to get my splash screen back? Or will I run into problems due to how the m7 partitions changed since I first flashed that zip last year?
Thanks

Jxt. said:
Hey there, you should easily be able to reflash that splash screen but, as always you should make a nandroid back up just in case anything happens.
Click to expand...
Click to collapse
hang on - since when do nandroid backups include splash screens? I know I've been out of the loop for a long time, but I didn't realize that much had changed...
Is that correct? Will I be able to nand restore a partition brick?

If you want to play it safe, look at the partition structure of the HTC One (International) and the HTC One (Sprint) and compare them. Then, if they're the same, go ahead and flash, and if they're not, don't flash it (although you might be able to work around this by modifying some files in the install zip. See this thread for more details.)

Related

[Q] Root and "unbrand" my Wildfire for stock HTC ROM?

Hey guys, I'm pretty new to Android really, a few months back I bought a G1 to dabble with it, but through some conflicting information and me screwing it up basically - I bricked it.
Now, I've upgraded my contract to a Wildfire, with 3 UK. It's a branded device, with their logo on boot, and Planet 3 app etc..
I've had a fiddle with the basic stuff, finding my way around and that, but I'd like to gradually take it further.
For now, I don't need the latest and greatest, so I don't want to go down the way of custom ROMs etc.
What I do want, is to have it think it's a generic HTC Wildfire, no network brandings, so that when HTC rolls out a release (As they have 2.2 this week) I can get it then, but I don't need to flash myself with CyanogenMod or whatever.
I wondered if it is possible to do this by removing the CID somehow?
Basically, I'm a noob, and I don't know if it's possible or not, but I pretty much want to just stop my phone thinking it's 3 branded, and get a stock HTC ROM on there, so that I can update it OTA as and when HTC roll them out.
Thanks in advance.
EDIT:
I have read about GoldCards, I know that they allow you to flash a ROM different from what your CID allows by bypassing it - but I'm not really sure if that's what I describe above or not. If I created a GoldCard, and flashed a stock HTC ROM via it, would I then be able to update it to 2.2, and further in the future OTA just as if I'd bought an unlocked device?
Quick update,
I've created a GoldCard successfully, and have rooted and installed CWMod recovery, and made nandroid backup.
Can I put any ROM on, such as this HTC stock "Buzz" one, or might it not work because of different radio/SPL or something?
Not sure if the one I use will have to be Wildfire specific, or radio specific or whatever?

HTC Vivid Stuck on HTC logo

Ok I tried using this All-in-one software to flash a kernel and it sent it over and wrote it but its stuck on the HTC logo, and yes I can boot into HBOOT and recovery, is there anyway I can restore straight back to everything factory?
Sounds like the wrong kernel for the Rom was flashed.
What rom/kernel were you trying to flash ?
I was trying to flash the holiradar Final rom, but it said I needed the newest kernel so, I didnt flash the rom yet but I went on the AIO program and flashed the holicakes 2.6.35.14 and when it wouldnt boot up after that...
So what do you suggest I do?
So you are going to need to flash the kernel that goes with the holicakes 2.6.35.14 rom.
Should be on the same site.
You can user CMD to fastboot flash boot boot.img and then the rom will boot.
From what I can tell on the rom page there is a kernel download section.
---------------------------------
Looks like he is instructing you to flash the kernel a different way than I have listed above, but both ways will work.
Riomaru said:
Ok I tried using this All-in-one software to flash a kernel and it sent it over and wrote it but its stuck on the HTC logo, and yes I can boot into HBOOT and recovery, is there anyway I can restore straight back to everything factory?
Click to expand...
Click to collapse
DO NOT TRY, FACTORY RESET WILL DO ABSOLUTELY NOTHING AND MIGHT ACTUALLY MAKE THINGS WORSE.
With that out of the way, don't use the AIO software, use fastboot.exe and flash a boot.img to fix the issue.
Riomaru said:
I was trying to flash the holiradar Final rom, but it said I needed the newest kernel so, I didnt flash the rom yet but I went on the AIO program and flashed the holicakes 2.6.35.14 and when it wouldnt boot up after that...
So what do you suggest I do?
Click to expand...
Click to collapse
No need to worry, you haven't had enough experience to know that it is normal. It is normal for the phone to not boot into the rom when the kernel doesn't match. since you have successfully flashed the kernel, you now need to boot into recovery (which I hope you have it installed at this point, if you have not, read how to do it and flash recovery) once in recovery, proceed to flash the HoliRaider rom and you'll be good to go.
in the same boat
Hi All,
I have a similar problem flashing the Kernal with the vivid toolkit (V 2.1) on my Vivid. I think there should be a big warning for that box. I tried flashing the Holicakes Kernal, and flashed it twice as it tells you to, and ended up with the white HTC screen. Then tried flashing back to the stock rom, more than twice now with no luck. In desperation I tried installing the RUU update 3.26.502.56_US but I now get error 150, which indicates a rom mismatch, and yet it is the update for the phone direct from htc.
What should I try next to get past the white screen?
Thanks
newbroman said:
Hi All,
I have a similar problem flashing the Kernal with the vivid toolkit (V 2.1) on my Vivid. I think there should be a big warning for that box. I tried flashing the Holicakes Kernal, and flashed it twice as it tells you to, and ended up with the white HTC screen. Then tried flashing back to the stock rom, more than twice now with no luck. In desperation I tried installing the RUU update 3.26.502.56_US but I now get error 150, which indicates a rom mismatch, and yet it is the update for the phone direct from htc.
What should I try next to get past the white screen?
Thanks
Click to expand...
Click to collapse
Did you install a recovery?
Also, it was not a good idea to try and install all different types of things once you thought it was messed up. Anytime you think you may have messed up, stop right then, read about the issue, and if you can't find the solution, ask a question. I think you can get out of this but some people aren't that fortunate.
vivid white screen
Thanks for the advice I will press on and do some more reading,
I can still get to CWM recovery and have tried restoring the backup image I made, with the same result.
During the kernal flashing process:-
- is the HTC dev lock supposed to be on or off? It is off and unlocked at the moment,
- is double flashing the kernal what is meant by the instruction 'if this is the first time you flash a kernal, make sure to reflash it', or as is suggested in esloan's post on this thread your supposed to flash a matching rom instead?
Thanks
You did the right thing by flashing the kernel twice. That is what those directions said. After you flash the kernel twice the next step would have been to flash a rom. I believe it is better to use the fast boot commands for doing this entire process. It sounds like you are still on the holicakes kernel.
What recovery do you have? 5.5.4 or WCX Recovery? You will have better results with WCX Recovery. Also watch this video:
http://www.youtube.com/watch?v=xEWa_lUd2bY&feature=youtu.be
That is by randog. He did a great video and he shows you how to install everything without a program. Do you have the holiradier rom on your phone?
I was on the CWM recovery.
Thanks for the link to Randog's video, I now have a working phone again.
The major difficulties I had was finding wildchild's webpage with the links shown on the video, mainly because searching for wildchild illuminati took me to a forum with no links to any thing vivid, until you register.
I was also a little worried that I wasn't getting ICS in the ATT_ generic rom, but I needn't have. The key seemed to be locking the phone again and running wildchild's PH39IMG.zip. After that the security warning on the Hboot screen disappeared.
I almost messed the rom flashing part. Randog's vivid does this really quickly, my phone was a good 3 minutes behind and the progress bar was stuck around the 10% way after his phone had finished.
Like Randog says in the video follow the steps and you wont brick and you'll have a working phone.
Thanks megatronisabeast
Glad you got it. Sorry, forgot to give out the link.
Sent from my HTC PH39100 using XDA
Afraid to screw up any further
Htc vivid. 1.2dualcore.ICS.*
unlocked boot loader.
Used all in one vivid *toolkit 2.1
http://forum.xda-developers.com/showthread.php?t=1498003.
There were two choices. After boot loader unlock, which I had already done. Using right reading logic, I went to the "next step". Didn't realize ICS meant ice cream sandwich. Dumbass. I used CWM 5.5.0.4. Then I tried to to update the kernel, to*Holicakes2.6.35.14. For some unknown reason. The result is the white screen of death.
.*
I have access to hboot. As well as the recover menu which has a backup and restore option.
NAND restore clockworkmod backup, is available. I'm not sure how proceed.*
At the bottom of the screen:*
RA Revamped
Build: made for the WCX ILLUMINATE SERIES by GINM
I studied quite a bit. Too dumb to get a clear picture of the necessary steps before I began, I guess. Again, what a Dumbass.
I *need a better understanding of the process.
I didn't know about the super guide until it was too late. Rather, I did not understand I had seen the super guide when I saw it. It was from December, called a Holliday guide, so I didn't read it. There were so many guides, it confused me pretty throughly. Sheesh.
I have the htc white screen, reboots every three minutes or so.
I would really appreciate someone who knows to give me some clarification on these issues.
I understand a lot of these issues have been dealt with in this thread. I'm just really apprehensive.
I hope I posted this in the right place.
Thanks in advance,
Microbot2
Microbot, you have done pretty much what I did. If you follow megatronis a Brady's advice you will have a working phone. In fact I'm using it right now. Use the generic att zip an you will have ICS less the ATT bloatware.
Okay mircobot, I am home and can help you. Here is what you should do:
http://www.youtube.com/watch?v=xEWa_lUd2bY&feature=youtu.be
Watch that video. Shows you what you will need to do to get everything working again.
The next thing, you need to download all of the files you will need for getting your phone working again. I would recommend going here:
http://www.wcxxperia-nce.com/index.php
You will have to register to see the vivid forums.
Next decide if you want to be able to tether (generic build) or if you want stock based rom (ATT vivid ics).
Download the zip file. Follow the instructions in the video and should get you up and running in no time. That would be the easiest way in my opinion.
If you can't get it figured out or need more help just post here and we will try to assist.
Microbot2--vivid
Hey guys, thanks for the prompt reply's and your general bad-assness.
I just woke and will Start on the instructions.
Megatronisabeast, really appreciate it. Newbroman, thank you.
I already feel considerably less worried about this already. I'll let you know how it works out.
microbot2_no PH39img.zip
Note: I updated to ICS from att before I unlocked the bootloader, which is still locked as now the phone can't be seen by the program.
Megatronisabeast, thanks for the link to the video. I am a little closer to understanding now. Unfortunately, I don't have direct access to the internal storage, like the guy in the video did. and I couldn't discern the website URL and he never tells you directly, except for "goto wildchilds site" which i couldn't locate.
I now know that I have access to wildchildes recovery. Unfortunately, I can only see the internal storage if I use WC recovery, ("windows wants to format it") then goto USB-MS. Otherwise the computers don't see it when its plugged up. It says "device not found when I try to do something in AIO_toolkit 1.2 Don't know if that helps.
I did find the wcxrecovery.img
It appears that you have to have access to internal storage to load an image to it. PH39img.zip, which I don't have. I can't seem to find the wildchild ICS image, either. when I start my phone, it looks for the ph39img.zip, doesn't see it, goes to the white screen.
I don't understand how to get the image back,Rather, how to access the internal storage again. is PH39img is the same thing as the ROM? Do I have to load PH39IMG.zip and the wilchild_vivid_ICS.ROM, which, again, I can't seem to find.
This feels like a comedy of errors. I wish I would have studied longer. I usually do. THEN, I find "newbie_proof" all in one toolkit.
I Just wanted it rooted. All I had to do was click "root" instead of "kernel". Man, what was I thinking?
If only I had taken the Red Pill.
Thanks again,
Look at my post above, the link for wild Childs site is there. You have to register to see the vivid forums. That is also where you will download the files needed to set up the ROM, etc. You won't need the Ph39.img since you already have ics. That is for the bootloader. You can actually send a file to your phone in the recovery. since you already have recovery you would need to download the Android sdk tools, so you will have fastboot. You use fastboot to send the boot image to your phone. Then you would go to recovery and send the .zip file to your phone and flash in recovery. Sorry these directions aren't better, I will try to assist more when I get home, Swyping right now.
Sent from my HTC PH39100 using XDA
Microbot,
The wildchild files you need are in the first link Megatronisabeast cites
wcxxperia-nce.com/index.php (I'm a newbie and cant post the full web address). You have to sign up to the forum to access the files. The vivid forum will appear once you have registered.
The PH391IMG.zip is not your normal PH39img.zip you have to use the one contained in the WCX_generic_ATT.zip on the WCX vivid forum page. You also need to relock the phone. You are probably better off using the fastboot and the windows command prompt for this.
Can you boot into recovery at all?
Do you have another phone? you could use that to copy the PH39img.zip over. Thats what I did.
Mcrobot2---
Hi guys,*
Here is what I think I know:
HBOOT is a bootloader, *like a BIOS.
PH39img.zip is the boot file. Like PH39IMG.zip which appears to be a modified version for WC.
Kernel *is the memory and CPU manager.
ROM is an operating system package, or file placed onto the erasable/programmable part of the phones memory. NAND, I think.
S-OFF/ON *is a security check.
.Apk: compressed java file.
.Jar: *java application file.
.odex *files: helper files with most relevant information to compile and run the concerned application as fast as possible, a JIT Kind of thing.
----
I was able to relock bootloader, Yea!
Thanks megatronisabeast and newbroman.
--history--I updated to ICS from AT&T.
I thought I could skip reading for another three weeks because of newbie-proof AIO 2.1. * wrong!
I wanted to root my phone. *I had unlocked the bootloader with htcdev.*
Found hasoons all in one vivid 1.2. Used WC's recovery. I then flashed with hollicakes kernel, twice. Wsod.
--
Megatronisabeast:*
You use fastboot to send the boot image to your phone. Then you would go to recovery and send the .zip file to your phone and flash in recovery.
-I'm not sure the exact boot img,*
- I think the zip file would be the rom?
Getting closer.
Thanks again guys. I'm feeling a little thick lately. Like freshman year of college! Weed out classes.

[Q] Need help restoring htc one

Okay, so first and foremost I am a giant noobasaurusrex. Just thought I'd get that out there.
So here is my issue, I just purchased my HTC one from Sprint and was eager to root the phone and flash new roms. As a result, I unlocked my bootloader, installed a recovery, and tried to flash this:
http://forum.xda-developers.com/showthread.php?t=2183023
I now realize that this is for the international version of the HTC one, not the CDMA/sprint version. I had created a backup before flashing and I tried to restore it but it does not work; the phone will boot into the OS but there is no radio, wallpaper, etc and it freaks out and restarts sporadically.
I am currently downloading the RUU for sprint and am really hoping it will fix my issues, however the filesize is huge and my internet is terribly slow. If anyone has any suggestions which do not require the massive download (~8hrs) I would be greatly appreciative.
danny4213 said:
Okay, so first and foremost I am a giant noobasaurusrex. Just thought I'd get that out there.
So here is my issue, I just purchased my HTC one from Sprint and was eager to root the phone and flash new roms. As a result, I unlocked my bootloader, installed a recovery, and tried to flash this:
http://forum.xda-developers.com/showthread.php?t=2183023
I now realize that this is for the international version of the HTC one, not the CDMA/sprint version. I had created a backup before flashing and I tried to restore it but it does not work; the phone will boot into the OS but there is no radio, wallpaper, etc and it freaks out and restarts sporadically.
I am currently downloading the RUU for sprint and am really hoping it will fix my issues, however the filesize is huge and my internet is terribly slow. If anyone has any suggestions which do not require the massive download (~8hrs) I would be greatly appreciative.
Click to expand...
Click to collapse
The only options are to flash the backup or the RUU, preferably the latter. So no way around the download time

[Q] Flashing a custom rom with phone already flashed to cricket

Good afternoon all,
I have an HTC One PN072. I've flashed the phone from Sprint to Cricket. They were very adamant about me not "resetting" the phone as it will remove the information, or flash they've added.
I've done several searches and can't seem to find a thread indicating 1) if this is possible and 2) a guide to doing so. The phone already is rooted and has TWRP on it as well.
If anyone knows of a thread I would love a link to a guide.
heartspains88 said:
Good afternoon all,
I have an HTC One PN072. I've flashed the phone from Sprint to Cricket. They were very adamant about me not "resetting" the phone as it will remove the information, or flash they've added.
I've done several searches and can't seem to find a thread indicating 1) if this is possible and 2) a guide to doing so. The phone already is rooted and has TWRP on it as well.
If anyone knows of a thread I would love a link to a guide.
Click to expand...
Click to collapse
I have a Sprint One fully flashed to Verizon and I flash custom ROMs all the time without any problems. I have never lost any settings and I don't even have to re-activate my phone. I would think that as long as you dont use Bootloader to flash a complete RUU image you should be fine. Goin s-off if your not already might cause issues here as well. (If someone knows for sure please correct me) I would say just download a ROM and install it with TWRP. I have updated firmware as well with no issues as well, however the firmware I upgraded with did not contain a radio update, which I am hesitant to do since I imagine that will effect my flash. I did my flash myself but it seems like a headache re-doing it.
electroblood said:
I have a Sprint One fully flashed to Verizon and I flash custom ROMs all the time without any problems. I have never lost any settings and I don't even have to re-activate my phone. I would think that as long as you dont use Bootloader to flash a complete RUU image you should be fine. Goin s-off if your not already might cause issues here as well. (If someone knows for sure please correct me) I would say just download a ROM and install it with TWRP. I have updated firmware as well with no issues as well, however the firmware I upgraded with did not contain a radio update, which I am hesitant to do since I imagine that will effect my flash. I did my flash myself but it seems like a headache re-doing it.
Click to expand...
Click to collapse
The wipes in TWRP usually recommended before flashing a custom rom don't remove their flashed data?
heartspains88 said:
The wipes in TWRP usually recommended before flashing a custom rom don't remove their flashed data?
Click to expand...
Click to collapse
Not that I have ever experienced. That was true on my EVO LTE and has so far been true on my One. I have the newest TWRP and in the past two days I have flashed EclipticOne, Elegencia and Insert Coin. On my old Droids Clockwork recoveries reset worked fine as well. DONT do a factory reset from inside the ROM. I have not tried it on my One, but on my EVO and my Droid 1/2/3 phones that would undo parts of a flash and I would have to reactivate. If I were you I would just work within my current firmware and flash what was available.
It is possible for you to flash your phone back to Cricket for free but its requires a lot of setup and can be a real pain in the ass. Getting 3G on Verizon was particularly painful and I have many screen shots and pages of notes on the actual procedure. When I upgraded from my EVO to the One I managed to get it right the first time by following my notes but it was still a serious hassle.
electroblood said:
Not that I have ever experienced. That was true on my EVO LTE and has so far been true on my One. I have the newest TWRP and in the past two days I have flashed EclipticOne, Elegencia and Insert Coin. On my old Droids Clockwork recoveries reset worked fine as well. DONT do a factory reset from inside the ROM. I have not tried it on my One, but on my EVO and my Droid 1/2/3 phones that would undo parts of a flash and I would have to reactivate. If I were you I would just work within my current firmware and flash what was available.
It is possible for you to flash your phone back to Cricket for free but its requires a lot of setup and can be a real pain in the ass. Getting 3G on Verizon was particularly painful and I have many screen shots and pages of notes on the actual procedure. When I upgraded from my EVO to the One I managed to get it right the first time by following my notes but it was still a serious hassle.
Click to expand...
Click to collapse
i was thinking about getting my one flashed to verizon but how does it work?? say i get my phone flashed.. is it verizon pre paid?? does that come with unlimited data?? text & talk?? how much would my bill be a month? sorry for all the questions
I apologize, so just to be as clear as possible, if you follow all of the wipes that roms usually ask you to perform in TWRP then you should be fine? However, do not perform a factory reset in the rom itself once loaded?
Doing a wipe through TWRP's wipe feature is fine as long as you dont go into 'Advanced' and mess with settings. Do not do the factory reset within the ROM once the ROM is loaded. If, while installing a ROM, the installer wants to do a wipe, that is fine as well.

[Q] HTC One M7spr Kernel

I flashed this kernel on my m7 sprint because I wanted to try some of the features it brought to the table . I thought I could just restore from my backup I made in TWRP and I would be on my way. I have tried to restore had no luck getting sense to boot. When it finishes booting I get a message that the system UI has crashed with a green HTC logo on a simple white background. If I hold down the power button then I get the power off menu. I also tried installing CM on it and I don't get any cell service on the phone. I really need this phone to work. Are there anything I can try or flash to get it working?
EDIT: It booted but with no service
commandojack said:
I flashed this kernel on my m7 sprint because I wanted to try some of the features it brought to the table . I thought I could just restore from my backup I made in TWRP and I would be on my way. I have tried to restore had no luck getting sense to boot. When it finishes booting I get a message that the system UI has crashed with a green HTC logo on a simple white background. If I hold down the power button then I get the power off menu. I also tried installing CM on it and I don't get any cell service on the phone. I really need this phone to work. Are there anything I can try or flash to get it working?
EDIT: It booted but with no service
Click to expand...
Click to collapse
Always read before flashing!
First information in ElementalX OP:
Kernel for Google Play Edition and Sense-based ROMs
FAST • STABLE • FULL-FEATURED
This version works on every HTC One variant except Sprint and Verizon.
Click to expand...
Click to collapse
GSM variant and CDMA (Sprint) variant have different partitions layout. Boot (kernel) partition for GMS variant is partition mmcblk0p33. Same partition on Sprint variant (mmcblk0p33) is the Radio partition, so you just have flashed a Kernel on your Radio partition hence why your phone doesn't work/doesn't have any service.
Now you need to flash the radio partition with a Sprint radio.
And if you want a Kernel, use a Sprint Kernel only, from the Sprint forum.

Categories

Resources