[Q] - Xposed General

Pls I ve been trying to use xposed installer framework but app_process still red after reboot, see d attached picture. Thanks.

threashold said:
Pls I ve been trying to use xposed installer framework but app_process still red after reboot, see d attached picture. Thanks.
Click to expand...
Click to collapse
have you tried change installation mode?

threashold said:
Pls I ve been trying to use xposed installer framework but app_process still red after reboot, see d attached picture. Thanks.
Click to expand...
Click to collapse
Maybe you can't write to system for real... Check your device thread for a system r/w workaround

rignfool said:
Maybe you can't write to system for real... Check your device thread for a system r/w workaround
Click to expand...
Click to collapse
Thanks for your reply, I got it done after several rebooting. It's working perfectly now.

Related

[Q] Can someone please help me?

Xposed Framework will not install on my Straighttalk Samsung Centura for nothing. I tried installing different versions of Xposed Installer and that didn't help. Yes, I'm rooted. I use other root apps with no problem. I use Superuser. It works fine. Ok, so when I press Install/Update on Xposed Installer I giver it Superuser permissions and it says Install/Update with the little circle going around. It stayed like that all night. What am I doing wrong? I started thinking and I even changed /system permissions to r/w with File Explorer because my installation mode is Classical(write to /system directly) and thag didn't either. Does Xposed Installer use any data because I'm currently throttled and my 3G speeds are so slow. So I was wondering when you press Install/Update does Xposed Installer download something or no? Can someone please tell me what I'm doing wrong here?
Have you tried a different installation method? Also, can you post a logcat when the circle keeps on spinning?
Only the "Downloads" section uses the Internet.
GermainZ said:
Have you tried a different installation method? Also, can you post a logcat when the circle keeps on spinning?
Only the "Downloads" section uses the Internet.
Click to expand...
Click to collapse
I took a couple of screenshots. I'm not very techy. I don't know what a logcat is. :/
TreQuanYoung said:
I took a couple of screenshots. I'm not very techy. I don't know what a logcat is. :/
Click to expand...
Click to collapse
To change the installation mode: tap "installation mode".
To take a logcat: Google "logcat". There are plenty of great tutorials around that cover pretty much everything.
EDIT: Also make sure you're using the latest version of the Xposed Installer.
GermainZ said:
To change the installation mode: tap "installation mode".
To take a logcat: Google "logcat". There are plenty of great tutorials around that cover pretty much everything.
EDIT: Also make sure you're using the latest version of the Xposed Installer.
Click to expand...
Click to collapse
What installation mod should I change it to? And yes I tried using the latest version. That's why I'm using v2.6
TreQuanYoung said:
What installation mod should I change it to? And yes I tried using the latest version.
Click to expand...
Click to collapse
Any of the recovery methods. One is automatic, the other manual - pick whatever you want.
A logcat of the classical installation method will be useful if you want to see it fixed (if possible), so you probably want to do that first if you care.
TreQuanYoung said:
That's why I'm using v2.6
Click to expand...
Click to collapse
Too bad 2.6.1 is the latest stable version. Shouldn't make a difference, though.
GermainZ said:
Any of the recovery methods. One is automatic, the other manual - pick whatever you want.
A logcat of the classical installation method will be useful if you want to see it fixed (if possible), so you probably want to do that first if you care.
Too bad 2.6.1 is the latest stable version. Shouldn't make a difference, though.
Click to expand...
Click to collapse
Ok, do you want me to screenshot the logcat?
TreQuanYoung said:
Ok, do you want me to screenshot the logcat?
Click to expand...
Click to collapse
No, please paste the full logcat somewhere like pastie.org or bpaste.net. You can also zip it and attach it here.
GermainZ said:
No, please paste the full logcat somewhere like pastie.org or bpaste.net. You can also zip it and attach it here.
Click to expand...
Click to collapse
Also I didnt mention that when I give it Superuser permission, a popup keeps saying "shell has been granted Superuser permissions". I think that's normal though. It only does it for about a minute and the circle keeps spinning
TreQuanYoung said:
Also I didnt mention that when I give it Superuser permission, a popup keeps saying "shell has been granted Superuser permissions". I think that's normal though. It only does it for about a minute and the circle keeps spinning
Click to expand...
Click to collapse
Didn't the Xposed Installer warn you about a segmentation fault? Check the FAQ and try the build there (search for "segmentation fault").
GermainZ said:
Didn't the Xposed Installer warn you about a segmentation fault? Check the FAQ and try the build there (search for "segmentation fault").
Click to expand...
Click to collapse
Thank you so much for your help. I installed XposedInstallerStaticBusyBox_v1.apk and Xposed Framework is installed. I just have to reboot.

Fix to install bar for .207

Any fix to the install bar in .207????
A zip or a file????
lucasgta95 said:
Any fix to the install bar in .207????
A zip or a file????
Click to expand...
Click to collapse
You can use an Xposed module to fix it.
Else, you will need to decompile a system apk and fix it yourself
TechnoSparks said:
You can use an Xposed module to fix it.
Else, you will need to decompile a system apk and fix it yourself
Click to expand...
Click to collapse
Okay, but what module and what parameter??
I fix it myself
Later uploaded for you
It has already been fixed before...
Check this out, it is a bug fix package-just extract it and take the packageinstaller.apk, push to system/app, set permissions and reboot. Alternatively try the one attached, the attached one has a white background (unlike the other one which is black), the white fits in more with Sony's 4.3 firmware.
If your getting an 'android is upgrading' message upon every boot (happened to me ) then move (or cut not copy) the packageinstaller.odex to your sd card/internal memory, reboot, then move it back into system/app, set permissions and reboot again-now it should boot like normal.
Btw you need root and a file explorer that supports root access to follow my method.
It seems to work.
Android updated once and then no problem.
Background is white. Why not.
Thanks a lot.
Killawave said:
Okay, but what module and what parameter??
Click to expand...
Click to collapse
Even if you have solved the problem, I will give you the module anyway:
http://repo.xposed.info/module/com.mohammadag.fixsony43bugs
Have fun! and sorry for the late response
TechnoSparks said:
Even if you have solved the problem, I will give you the module anyway:
http://repo.xposed.info/module/com.mohammadag.fixsony43bugs
Have fun! and sorry for the late response
Click to expand...
Click to collapse
It is solved by replacing the APK but I had forgotten this module.
So if fixes this bug?
Is there a list of solved bugs?
I will download and apply to test. Thanks...
Killawave said:
It is solved by replacing the APK but I had forgotten this module.
So if fixes this bug?
Is there a list of solved bugs?
I will download and apply to test. Thanks...
Click to expand...
Click to collapse
It only fixes the uninstall text going offset. Other than that the module seemed to be dead.

Help ? Xposed not working on lollipop :(

My Xposed was working fine but idk why from yesterday it showing error " The latest version of Xposed ia currently active. Do you install the framework and reboot? " what to do ? :'( . I tryed reinstalling of framework from recovery but still showing the error .
Nikhilgeek said:
My Xposed was working fine but idk why from yesterday it showing error " The latest version of Xposed ia currently active. Do you install the framework and reboot? " what to do ? :'( . I tryed reinstalling of framework from recovery but still showing the error .
Click to expand...
Click to collapse
From the log:
Code:
03-25 13:24:48.731 E/Xposed ( 5176): Found /data/data/de.robv.android.xposed.installer/conf/disabled, not loading Xposed
Delete that "disabled" file and you should be up and running again.
C3C076 said:
From the log:
Code:
03-25 13:24:48.731 E/Xposed ( 5176): Found /data/data/de.robv.android.xposed.installer/conf/disabled, not loading Xposed
Delete that "disabled" file and you should be up and running again.
Click to expand...
Click to collapse
Is Xposed working in Stock 5.1 ?
shmshd12 said:
Is Xposed working in Stock 5.1 ?
Click to expand...
Click to collapse
go.... away....
C3C076 said:
From the log:
Code:
03-25 13:24:48.731 E/Xposed ( 5176): Found /data/data/de.robv.android.xposed.installer/conf/disabled, not loading Xposed
Delete that "disabled" file and you should be up and running again.
Click to expand...
Click to collapse
How to delete that file ? , Please help me
Nikhilgeek said:
How to delete that file ? , Please help me
Click to expand...
Click to collapse
I think navigate to /data/data/de.robv.android.xposed.installer/conf and delete it? :/
-------------------------------------------
HIT Thanks if you like my post
-------------------------------------------
My work:
[TOOL]Kernel/Boot.img (un)packer
[ZIP]Flashable zip to bypass lockscreen for LG E975
[TOOL]ANDROID's COMPLETE TOOLBOX
Info about my work:
1)Kernel tool (reported to work on MTK too, tested on Qualcomm)
2)Bypass forgotten lock-screen without a factory reset
3)A COMPLETE TOOL for android, easy as cake, reported to work on MTK&Qualcomm​[/QUOTE]
MZ_. said:
I think navigate to /data/data/de.robv.android.xposed.installer/conf and delete it? :/
-------------------------------------------
HIT Thanks if you like my post
-------------------------------------------
My work:
[TOOL]Kernel/Boot.img (un)packer
[ZIP]Flashable zip to bypass lockscreen for LG E975
[TOOL]ANDROID's COMPLETE TOOLBOX
Info about my work:
1)Kernel tool (reported to work on MTK too, tested on Qualcomm)
2)Bypass forgotten lock-screen without a factory reset
3)A COMPLETE TOOL for android, easy as cake, reported to work on MTK&Qualcomm​
Click to expand...
Click to collapse
[/QUOTE]
It didn't work :'( , Please tell another way to solve that bug :/ .
Try xposed
Community on g+
They can help you :thumbup:
bichoubilal20 said:
Try xposed
Community on g+
They can help you :thumbup:
Click to expand...
Click to collapse
They Even cant solve the problem. :'(
Nikhilgeek said:
It didn't work :'( , Please tell another way to solve that bug :/ .
Click to expand...
Click to collapse
What do you mean it didn't work?
What did you actually do?
If you can't even delete the file, what are you doing installing alpha software?
I am having the exact same issue. My phone rebooted and I get the same message in the Xposed app. I do not have that file that was mentioned to be deleted though. I attached my log, any ideas?
EDIT: I rebooted and it is working fine again!
s2d4 said:
What do you mean it didn't work?
What did you actually do?
If you can't even delete the file, what are you doing installing alpha software?
Click to expand...
Click to collapse
I mean , Before it was working great but after that reboot my xposed didn't working. obviously i want my xposed working back. I deleted that and reinstalled the alpha 2 but it didn't worked for me.
kroovy said:
I am having the exact same issue. My phone rebooted and I get the same message in the Xposed app. I do not have that file that was mentioned to be deleted though. I attached my log, any ideas?
EDIT: I rebooted and it is working fine again!
Click to expand...
Click to collapse
But mine is not working even i don't know how many times i rebooted
Nothing in the /data directory
I'm running into the same problem as of this morning. The same line shows up in my log, but "/data/data/de.robv.android.xposed.installer/conf " doesn't seem to exist. Perhaps I'm looking in the wrong place.
Using ES File Explorer, I navigate to the "/" directory, and open the "data" folder, but there's nothing in there. nor is there anything in the "data" folder in the (emulated) SD card directory.
any suggestions?
munkymack said:
I'm running into the same problem as of this morning. The same line shows up in my log, but "/data/data/de.robv.android.xposed.installer/conf " doesn't seem to exist. Perhaps I'm looking in the wrong place.
Using ES File Explorer, I navigate to the "/" directory, and open the "data" folder, but there's nothing in there. nor is there anything in the "data" folder in the (emulated) SD card directory.
any suggestions?
Click to expand...
Click to collapse
Dont worry , Downland the file that i attached and install it from recovery and after rebooting your xposed will be fine .
having same issue in bluestack running android 4.4.2 kitkat
Nikhilgeek said:
Dont worry , Downland the file that i attached and install it from recovery and after rebooting your xposed will be fine .
Click to expand...
Click to collapse
any solutions for bluestack?? having exactly same issue and tried a lot... nothing happend. pls help
Can I install on Xposed S5 with Phoenix rom v. 7
faoineag said:
Can I install on Xposed S5 with Phoenix rom v. 7
Click to expand...
Click to collapse
shmshd12 said:
Is Xposed working in Stock 5.1 ?
Click to expand...
Click to collapse
ldeveraux said:
go.... away....
Click to expand...
Click to collapse
Guys, how the **** is that related to the discussion? Please keep the forum clean, THANKS.
@pauliusval99
yes bro. It works fine in my Hammerhead

[WORKAROUND][Xposed for Android 5.1] Make ~99% of modules work.

This has been fixed xda post​Note: This is a temporary solution until someone fixes this in Xposed. Also I use my module "SnapColors" as a example throughout this post but this fix should for work any module. I've tested it with other modules and it works. If the module did not previously work on 5.0 then ignore this post and continue on with life.
TL;DR Version:
I found a temporary solution of getting modules to work on 5.1 for modules that worked on 5.0 but don't work on 5.1.
Non-TL;DR Version: Backstory and how I found his temporary solution
So a couple days ago I decided to start working on bring my module(s) to Xposed running on 5.1. In doing so what I noticed with a lot of the modules they seem to crash the app without throwing any kind of error whatsoever. Take for example one of my modules "SnapColors", if SnapColors was enabled in Xposed Installer SnapChat would always crash without throwing any error it wouldn't even say anything along the lines of "process has stopped unexpectedly" it would just close the app. So because of this behavior it led me to believe something was wrong with Xposed and not with my module(s). So I went thought what could be broken in Xposed thats causing this because 5.0 is just one up to 5.1 so the changes couldn't be that big. I went though the things that could cause this and came across "dalvik-cache" I remember reading somewhere Xposed makes some changes to the cache file (.dex) thats created during the creation of dalvik-cache files. So then I thought what if in 5.1 a small change was made to the process of making the dalvik cache files and thats what is causing the problem. So I decided to delete the dalvik cache file for SnapChat which is what my module was hooking into, then I tried opening SnapChat again but it crashed so I tried opening it again and what do you know it opened without any problems with my module fully working without any problems. The fix was kind of a guess too.
The fix/Solution
Note: If you reboot your device you have to do the fix again. Also you are deleting the dalvik cache so you won't benefit from it any more for the app(s) you delete it for. Unless you reboot then everything gets reverted.
What you have to do is delete the dalvik cache file for the app the module is for.
Example: SnapColors a module for SnapChat, so we have to delete the dalvik cache file for SnapChat.
What you need:
1) A file manager with root access, or terminal knowledge.
2) Package name example for SnapChat its "com.snapchat.android". How to get the package name look below theres a how to.
Steps for deleting the cache file:
Make sure the app is not running in the background close it if it is.
Method 1) Via terminal command:
Code:
cd /data/dalvik-cache/arm/ && rm [email protected]@"package name here without the quotes"*
Example command for SnapChat would be don't forget the "*" at the end:
Code:
cd /data/dalvik-cache/arm/ && rm [email protected]@com.snapchat.android*
Method 2) Via file manager: Navigate to /data/dalvik-cache/arm/ look for a file starting with the name [email protected]@"package name here without the quotes".apk delete this file and thats it.
Now try and open the app if it doesn't work close the app then try opening it again. make sure that apps not running in the background before trying again.
Getting package name
Via terminal command:
Code:
ls /data/data/ | grep "the app name here without quotes"
Via app: Install https://play.google.com/store/apps/details?id=com.electricsheep.asi
Open it-> Apps tab-> Tap the app-> look for "Package name:" should be the first thing.
Great job figuring that out! I hope @romracer takes a look at it and releases an update with permanent fix
mmamedov said:
Great job figuring that out! I hope @romracer takes a look at it and releases an update with permanent fix
Click to expand...
Click to collapse
Yup. I wish I could help but my knowledge of c++ is limited.
Why are apps on 5.1 creating this dalvik file if the runtime is ART?
r25txe said:
Why are apps on 5.1 creating this dalvik file if the runtime is ART?
Click to expand...
Click to collapse
The files are used by art despite the name of the folder "dalvik-cache". I think don't quote me on that.
Subscribed
sent from your moms phone
Can I get gravitybox to work?
Sent from my Nexus 5 using XDA Free mobile app
Programming4life said:
Yup. I wish I could help but my knowledge of c++ is limited.
Click to expand...
Click to collapse
Enough knowledge to help me out on twitter ALLLL the time! Lol
Great Finding. Thanks for the info.
Any chance of getting work Xposed GEL setting with CM12.1 Android 5.1
Thanks
lolzas said:
Can I get gravitybox to work?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
For module related stuff post on there thread. Getting modules to work is on the dev of the module.
mjrifath said:
Great Finding. Thanks for the info.
Any chance of getting work Xposed GEL setting with CM12.1 Android 5.1
Thanks
Click to expand...
Click to collapse
For module related stuff post on there thread. Getting modules to work is on the dev of the module.
Another step into 5.1 with xposed.. Only needs rovo magic Touch.. Thanks for it...
Programming4life said:
For module related stuff post on there thread. Getting modules to work is on the dev of the module.
Click to expand...
Click to collapse
So can you tell us what are those 95% modules for xposed on Lolli 5.1?
Can you give us some examples what modules are working on your smart phone with your metods?
Thanks...
spaxon said:
So can you tell us what are those 95% modules for xposed on Lolli 5.1?
Can you give us some examples what modules are working on your smart phone with your metods?
Thanks...
Click to expand...
Click to collapse
I said ~95% because some modules need to be updated strictly for lollipop and won't work no matter what. Its more like 99% but 95% just in case.
Programming4life said:
The fix/Solution
Note: If you reboot your device you have to do the fix again. Also you are deleting the dalvik cache so you won't benefit from it any more for the app(s) you delete it for. Unless you reboot then everything gets reverted.
Click to expand...
Click to collapse
Something I dont understand, for almost every module in xposed on every version of android, you must enable that module in xposed and reboot smartphone to get it work... is it true?
I have tried Gravitybox LP and some more modules like Flat Style Bar Indicators, with deleting them in /data/dalvik-cache/arm/ but they dont work at all, i have tried couple of times starting them.
Also I tried deleting them in twrp file manager and I have bootloop (but no worries I deleted those modules and started the phone )
Am I doing something wrong?
spaxon said:
Something I dont understand, for almost every module in xposed on every version of android, you must enable that module in xposed and reboot smartphone to get it work... is it true?
I have tried Gravitybox LP and some more modules like Flat Style Bar Indicators, with deleting them in /data/dalvik-cache/arm/ but they dont work at all, i have tried couple of times starting them.
Also I tried deleting them in twrp file manager and I have bootloop (but no worries I deleted those modules and started the phone )
Am I doing something wrong?
Click to expand...
Click to collapse
After installing a module you must enable it and then do a reboot/soft reboot yes that is true. Gravitybox LP and Flat Style Bar Indicators both modify the android system itself so theres nothing we can really do until someone fixes this bug in Xposed's code.
What if we modify the permissions or the file itself so we don't have to constantly delete it upon reboots?
Sent from my Nexus 5 using Tapatalk
Youtube background playback don`t works with that method
FuMMoD said:
What if we modify the permissions or the file itself so we don't have to constantly delete it upon reboots?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Android doesn't like it when the permissions are changed for a cache file so it'll just fc the app.
jabarel said:
Youtube background playback don`t works with that method
Click to expand...
Click to collapse
Worked for me you may have a out dated version of YouTube or YouTube background.

Downloaded a module from magiskroot.net - safe?

So like a total dumbass I didn't check the source and downloaded a module (fde.ai) from magiskroot.net . Seemed to install fine, boot took a bit longer than usual, after boot the module was not listed in Magisk manager.
Is that site safe?
Thanks!
PS I guess I'm asking opinions about the specific site...
I would investigate and open the zip and look what it changes? Did you install it in recovery or in magisk?
I don't know that site.
McFlypants said:
I would investigate and open the zip and look what it changes? Did you install it in recovery or in magisk?
I don't know that site.
Click to expand...
Click to collapse
In Magisk. I'm trying to search for added files in the system right now, nothing found so far. I have also opened the zip (just before your reply) but I'm not sure I'll be able to decipher...
krakout said:
In Magisk. I'm trying to search for added files in the system right now, nothing found so far. I have also opened the zip (just before your reply) but I'm not sure I'll be able to decipher...
Click to expand...
Click to collapse
a magisk module wouldn't change system files it'll just create a folder in data/adb/modules so look there for strange folders
jons99 said:
a magisk module wouldn't change system files it'll just create a folder in data/adb/modules so look there for strange folders
Click to expand...
Click to collapse
Only the few, known modules there. Should I assume I'm ok then?
krakout said:
Only the few, known modules there. Should I assume I'm ok then?
Click to expand...
Click to collapse
not sure it might have done something else like put a script that magisk run on boot or something maybe send me this module in pm and I'll look at what's in there
Sure thing, thanks. Also, here is the Magisk log:
jons99 said:
not sure it might have done something else like put a script that magisk run on boot or something maybe send me this module in pm and I'll look at what's in there
Click to expand...
Click to collapse
Sure thing, thanks. Also, here is the Magisk boot log:

Categories

Resources