Related
I recently bought this Nexus off eBay and it worked fine.
Owner said it had problems with the SD card, but it seemed to be working, for they said it wouldnt read, when it does.
Anyway, it had cyanogen mod 6.1.1 on it, and I hate the setup...so i changed roms. That was a success, but when i flashed a sense rom thru clockwork(most updated) it said:
E:Error in /sdcard/N1Sensation_v0.4.zip
(Status 0)
Installation aborted.
Now, when i flash any roms, whether it says it installed correctly, it doesnt change anything. Now it's stuck at the 4 color x with the unlock icon. Any advice is good advice!
In my hboot, it says:
*** UNLOCKED ***
NEXUSONE PVT SHIP S-ON
HBOOT-0.35.0017
MICROP-0b15
TOUCH PANAL-SYNT0103
RADIO-5.00.00.04
Oct 12 2010, 14:33:16
HBOOT
Etc. Etc. Etc.
Thanks for any help!
Edit: I fixed the issue with why it failed, was my fault, didnt partition the card...but i was flashing a stock rom and it said complete and when i rebooted it stayed at the X and then powered off. Since then has never turned on. I don't know what to do. Nothing will turn it back on. I have a universal charger that charges the battery and it said the battery is full. I need help!
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Dude Random21 said:
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Click to expand...
Click to collapse
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
matistight said:
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
Click to expand...
Click to collapse
Try flashing CM7. Also...before you do...you may want to search for a format.zip from a member named temasek. It'll wipe your phone...clean. Real clean. Then flash CM7. try that.
also....those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
SiNJiN76 said:
Try flashing CM7.
those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
Click to expand...
Click to collapse
I can't flash anything. Phone wont react to anything anymore. Hoping one of my family members can fix it. But if I get it on I will try that.
I am pretty sure i waited long enough, but who knows. I didn't partition my card, which may have been the problem. And also it was S-On....which i thought was odd when it had a custom firmware.
Unlock bootloader. Flash recovery. Boot into recovery. Wipe everything. Flash rom.
Why do you guys keep suggesting software stuff when it's probably a hardware problem he can't get the phone to boot up so he can't do any of that.
Although there is one thing I want you to try before your family take a crack at it to take it apart and what not, it's a long shot but it's your last chance if it's software. Hold down trackball and press power keep holding trackball for another 5-10 seconds (better to long then to short) then connect it to the computer via USB you could see a popup notification saying that it's looking for driver software if you do then it's software and we need to reflash everything and might need to unlock the bootloader. Now if you don't see a popup notification I would still go check in the device manager and check for an unidentified device probably in other (it should be extracted so that you can see it).
If this doesn't work then sorry but I think it's a brick
Because in order to find out if its truly a hardware problem you need to try every software fix first.
Op mentioned nothing of trying fastboot as well. Software fix is free hw is not. That is why we suggest software fixes.
Sent from my Nexus S using XDA App
Let me remind you guys, THE PHONE WONT TURN ON AT ALL REGARDLESS OF WHAT I DO. I can post a YouTube video to show everything. It'd be very random for it to be hardware because it just turned off and will not turn back on. If there is any software like an RUU out there, that would help, if not, ill have to buy a bottom piece and warranty it out. But I'd feel bad because that isn't the right thing to do.
I don't expect you guys to fix it and I and very thankful of your help! But the phone won't turn on at all. So telling me to flash roms doesn't work. Imagine it as flashing a rom with the battery out of your phone. I am wondering if there's an adb way or something to get it to turn on and restore to stock?
With all that said, any help is amazing help and I am very grateful that this isn't a post I have to bump! Thank you so much, when I go on the PC, ill thank the helpful posts
Sent from my (finally) permanent root Sensation 4G
Then it is a brick if it won't turn on at all. The entire getting stuck at the x thing confused me to think it was powering on.
You have me confused sir, I'm not quite sure what good it is your looking for a RUU for. If the phone truly won't turn on/go past the X screen and you have it on a charger with no LED notification, then the phone is bricked. When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom. If you can still get to the bootloader screen then you are not bricked and should retry everything from scratch.
Thread Closed
xsnipuhx said:
When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom.
Click to expand...
Click to collapse
Sensation based, but it was a Sense rom
Confirmed it is bricked.
Sold on eBay for $100
Bought for $77
Semi-Winning.
Thread Closed
I was attempting to flash the ICS4 ROM. I had formatted /system and was done with installing the from from zip. Before I could do anything else, the phone just stopped being responsive. I pulled and restored the battery but the phone will not boot up. What to do now, short of going to my VZW store?
When you say it doesnt boot.. what exactly do you mean? Does anything come up on the screen?
nothing comes when you press the power button, screen remains blank.
ronaldheld said:
nothing comes when you press the power button, screen remains blank.
Click to expand...
Click to collapse
Did you try booting up into recovery and then going to fastboot and reinstalling the stock fxz file to see if that fixed it?
Sure the battery didn't die also?
The phone does not boot into recovery. Pressing the power button does nothing at all, as far as I can see.
I found out that the phone is literally fried. Whether the ICS4 ROM contributed is unknown.
You are most likely covered under manufacturer warranty - seems like a hardware failure. Never known of a ROM flash to fry a phone's board.
They also most likely won't know you even tried to flash a custom ROM.
That part is very good to know.
I will have restart again with rooting, and proceed with flashing Eclipse 2.2.
Is the place you live in very statically charged? When you touch metal do you get shocked alot?
If you touched the battery ports it could have discharged into the phones board and killed it.
Let us know what they do for you.
ronaldheld said:
That part is very good to know.
I will have restart again with rooting, and proceed with flashing Eclipse 2.2.
Click to expand...
Click to collapse
Compared to everything else we do here at XDA, the process to get rooted and flash a ROM is very basic. Getting the phone back up and running is the more difficult part.
What I can say to try is attempt to use a different battery. I had a problem once where both of my batteries functioned properly because I was able to test them in other phones. But when I placed that specific battery into my phone, it wouldn't boot up. I ended up using a different battery and was then able to boot into AP Fastboot and fxz to fix it. Then my "dysfunctional" battery worked properly again.
So my phone's not yet fixed since the 25th of December due to sudden death - http://forum.xda-developers.com/showthread.php?t=2585068
We had it checked again last Thursday, January 3rd. The technician said that the replacement of motherboard is not yet clear to be the best solution as the technicians from the Sony Service Center hadn't opened the phone yet. He said that it might have been a cause of a dead or death boot. Has anyone heard of it? He says not only Sony phones are experiencing this dead or death booth, even other brands. Kind of random.He said that the phone somewhat hangs, the screen isn't on but the system is still running which causes the phone to become warm or hot. And he also said that this lead to the battery getting totally drained. As per him, once the battery is totally drained it won't get charged even if I try to charge the phone for a number of hours. So what he will do when I get back to him on Monday is he will first try to shock the battery to see if it will be revived (which I hope this is just the case) and then dload some firmwares or softwares to fix the unit.
I hope this ordeal will be solved this following week as it's been so inconvenient on my part and I terribly miss my phone.
One of possibility is that they will open the back cover, pull out the battery and charge it to full, then they put it back and flash the stock firmware. With battery charged they have enough time for flashing and the phone should turn on. If it's Sony Center to do that they will also seal the phone as original to get fully working waterproof.
eclyptos said:
One of possibility is that they will open the back cover, pull out the battery and charge it to full, then they put it back and flash the stock firmware. With battery charged they have enough time for flashing and the phone should turn on. If it's Sony Center to do that they will also seal the phone as original to get fully working waterproof.
Click to expand...
Click to collapse
I really, really, really hope it'd work. For the waterproofing it would be fine to take it to the Sony service centre just to have the full waterproofness back.:good:
Just flash kernal from,any firmware by flash tool,and put your cell phone on charge.,it will charge... The same thing happen to me
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Just flash kernal from,any firmware by flash tool,and put your cell phone on charge.,it will charge... The same thing happen to me
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Flashmode not working and fastboot too the deviice is HARD BRICKED !!!
Meni30 said:
Flashmode not working and fastboot too the deviice is HARD BRICKED !!!
Click to expand...
Click to collapse
Have you managed to find a way to fix it?
I think my phone is hard bricked becuase its stuck on the Sony logo and my pc wan't detect it and none of the buttons work
SpawnCube said:
Have you managed to find a way to fix it?
I think my phone is hard bricked becuase its stuck on the Sony logo and my pc wan't detect it and none of the buttons work
Click to expand...
Click to collapse
Hey guys, do the devs a favour: NOT EVERY SIMPLE BOOTLOOP IS A BRICKED DEVICE!!!
Just go to recovery and wipe everything, it then should boot without problems.
if it doesn't, first check yourself (e.g. did you flash a 4.4 kitkat without flashing a new kernel for it?)
the answers for nearly all problems are here on xda-developers ... just read, read and read and understand ... if you don't know, what you do with flashing your device, what the partitions data / cache / system are for, what a kernel is or what the differences between stock roms, custom rom releases and nightly builds is, you simply SHOULD NOT flash your device.
If you understand what you are doing and if THAT ALL doesn't help you and you think you have a problem noone else have (i allready had such a thing with my defy+, it got bootloop and it was a dead memory chip) THEN (and just then) post your problem here. The devs simply don't have the time to help everyone who simply can't read the existing threads.
Thanks (and dont get angry on me, just saying so you can do it better the next time)
DJ_Synergy said:
Hey guys, do the devs a favour: NOT EVERY SIMPLE BOOTLOOP IS A BRICKED DEVICE!!!
Just go to recovery and wipe everything, it then should boot without problems.
if it doesn't, first check yourself (e.g. did you flash a 4.4 kitkat without flashing a new kernel for it?)
the answers for nearly all problems are here on xda-developers ... just read, read and read and understand ... if you don't know, what you do with flashing your device, what the partitions data / cache / system are for, what a kernel is or what the differences between stock roms, custom rom releases and nightly builds is, you simply SHOULD NOT flash your device.
If you understand what you are doing and if THAT ALL doesn't help you and you think you have a problem noone else have (i allready had such a thing with my defy+, it got bootloop and it was a dead memory chip) THEN (and just then) post your problem here. The devs simply don't have the time to help everyone who simply can't read the existing threads.
Thanks (and dont get angry on me, just saying so you can do it better the next time)
Click to expand...
Click to collapse
Thanks, you just said what I wanted to say.
Just received the stock update to Sense 6. I am in Canada, on Telus, fully stock.
When the phone boots into the recovery to flash the update, I am getting a red triangle and the error is unexpected contents in settings.apk
Any suggestions on how to get this update working other than hard resetting before the update?
Thanks.
Can you reboot normally? Just select the Reboot system option? Also, if it insists on going to update, hold power button to forcefully restart and keep pressing the volume down button to get into bootloader mode.
Try restart from there.
As you are FULLY stock (no root, should say LOCKED on that bootloader screen) you can either consider going through the warranty OR trying it yourself to fix by unlocking bootloader OR take it to someone locally.
Unfortunately all options will lead to data loss.
SaHiLzZ said:
Can you reboot normally? Just select the Reboot system option? Also, if it insists on going to update, hold power button to forcefully restart and keep pressing the volume down button to get into bootloader mode.
Try restart from there.
As you are FULLY stock (no root, should say LOCKED on that bootloader screen) you can either consider going through the warranty OR trying it yourself to fix by unlocking bootloader OR take it to someone locally.
Unfortunately all options will lead to data loss.
Click to expand...
Click to collapse
Yes it reboots and yes I have a locked bootloader. I would hard reset before sending it out for servicing.
Any other people having this issue?
mfpreach said:
Yes it reboots and yes I have a locked bootloader. I would hard reset before sending it out for servicing.
Any other people having this issue?
Click to expand...
Click to collapse
Not heard of a problem while updating. You are special.
What are your guys thoughts on flashing a stock ruu and then trying to ota to sense 6?
mfpreach said:
What are your guys thoughts on flashing a stock ruu and then trying to ota to sense 6?
Click to expand...
Click to collapse
Great idea!
mfpreach said:
What are your guys thoughts on flashing a stock ruu and then trying to ota to sense 6?
Click to expand...
Click to collapse
Did your problem solved?
Haha I haven't been able to try, on my 8.1 box I get an error 170 when trying to connect the phone in ruu. On my win7 box the ruu just auto closes....
mfpreach said:
Haha I haven't been able to try, on my 8.1 box I get an error 170 when trying to connect the phone in ruu. On my win7 box the ruu just auto closes....
Click to expand...
Click to collapse
well error 170 is either because your drivers aren't installed correctly or because you have a bad usb cable/port
alray said:
well error 170 is either because your drivers aren't installed correctly or because you have a bad usb cable/port
Click to expand...
Click to collapse
Thanks,I will look into it tomorrow.
Are there even good drivers for 8.1 yet bearing in mind I don't have a USB 3 port?
mfpreach said:
Thanks,I will look into it tomorrow.
Are there even good drivers for 8.1 yet bearing in mind I don't have a USB 3 port?
Click to expand...
Click to collapse
hi, we have similar issues although mine is the soundhound_freemium.apk instead of settings.apk, I hope that you will get your issue settled and also update me and the rest of us who are having the issues here. good luck and thanks! (do check out my thread which I've just posted like 5 minutes back!)
Do not install sense 6 upgrade
I would recommend NOT installing the stock Sense 6 upgrade. I installed it a couple days ago and currently my phone is bricked because of it.
I posted about my issue in another thread. In case people want to read what's been going on i'll repost it here.
Kg810 said:
So I performed the Sense 6 upgrade a couple days ago, update went through fine, yesterday morning my phone started acting all weird (sluggish, random reboots, bunch of apps reporting errors, etc) and battery was draining fast.
I probably rebooted my phone 10 times, 5 times normally by just the power button and the remaining times through the light trick, power button and volume button. Once my phone finally got back to normal, I was typing on whatsapp and then suddenly it froze.
It froze for a couple minutes and then it turned off. I believe the battery was at 39%. I plugged the phone into my work computer and it would make the USB connection sound, then after a few seconds it would display drivers failed to install followed by 3 subtle sounds similar to the connection sound. So right away I checked Device Manager and it displayed QHSUSB_DLOAD.
Currently my phone has been charging all night, currently it is being charged at work and there has been no sign of life.
I've tried putting it in the freezer, the light trick, the laptop connecting/disconnecting trick, and the go ole punching the phone trick. None of them have worked.
The phone is definitely not charging at this point as it is stone cold when I hold it or touch the wall charger.
Any ideas what I can do? I don't want to contact Rogers and have to send it in. I've got so many songs, videos and pictures I have yet to backup.
Any help and/or suggestions welcome.
Click to expand...
Click to collapse
Kg810 said:
I would recommend NOT installing the stock Sense 6 upgrade. I installed it a couple days ago and currently my phone is bricked because of it.
Click to expand...
Click to collapse
Well your issue have nothing to do with the sense 6 update. You even said that you have updated the phone a couple of days before your phone died. QHSUSB_DLOAD mode mean your phone motherboard is dead, either because of an hardware failure or because you have flashed something really wrong (probably not your case). So how an hardware failure could be caused by a sofware update and only occur days later....? unfortunately, you must send your phone for repair.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
mfpreach said:
Thanks,I will look into it tomorrow.
Are there even good drivers for 8.1 yet bearing in mind I don't have a USB 3 port?
Click to expand...
Click to collapse
if you have a win7 computer, then use that one.
alray said:
Well your issue have nothing to do with the sense 6 update. You even said that you have updated the phone a couple of days before your phone died. QHSUSB_DLOAD mode mean your phone motherboard is dead, either because of an hardware failure or because you have flashed something really wrong (probably not your case). So how an hardware failure could be caused by a sofware update and only occur days later....? unfortunately, you must send your phone for repair.
Click to expand...
Click to collapse
Maybe I wasn't clear.
Tuesday night before I went to bed I performed the upgrade.
Wednesday morning, is when the issues started occuring.
Today is May 29th, Tuesday was May 27th, which is 2 days ago, hence why I said I performed the upgrade a couple days ago.
From the time I performed the install Tuesday night to Wednesday morning when I got into work, there was nothing done to the phone. The only thing that was done was the Sense 6 upgrade.
So you're trying to tell me that the upgrade has nothing to do with it?
Kg810 said:
So you're trying to tell me that the upgrade has nothing to do with it?
Click to expand...
Click to collapse
If your phone was 100% stock, I highly doubt the ota could hard brick it.
like I said QHSUSB_DLOAD = defect motherboard
in most cases because:
1- hardware failure
or
2- Flashing something that screwed your phone (i.e flashing something not meant for your phone with S-OFF)
I'm not saying its impossible, but I think it's more a coincidence
alray said:
If your phone was 100% stock, I highly doubt the ota could hard brick it.
like I said QHSUSB_DLOAD = defect motherboard
in most cases because:
1- hardware failure
or
2- Flashing something that screwed your phone (i.e flashing something not meant for your phone with S-OFF)
I'm not saying its impossible, but I think it's more a coincidence
Click to expand...
Click to collapse
I've had the phone for a little over a year and it has been 100% stock. Never tinkered with it in any way shape or form.
I just can't see how it is a mere coincidence that right after the update, my phone starts acting up, and then becomes bricked.
Kg810 said:
I've had the phone for a little over a year and it has been 100% stock. Never tinkered with it in any way shape or form.
I just can't see how it is a mere coincidence that right after the update, my phone starts acting up, and then becomes bricked.
Click to expand...
Click to collapse
Anyway, your only way out of this qhsusb brick is to send your phone for repair.
Sorry
mfpreach said:
Yes it reboots and yes I have a locked bootloader. I would hard reset before sending it out for servicing.
Any other people having this issue?
Click to expand...
Click to collapse
facing same problem with you. my problem haven't fix. from malaysia
akasi91 said:
facing same problem with you. my problem haven't fix. from malaysia
Click to expand...
Click to collapse
From Malaysia as well, hey mind telling me how big is your sense 6 update download size?
kuzumitaiga said:
From Malaysia as well, hey mind telling me how big is your sense 6 update download size?
Click to expand...
Click to collapse
6xxmb.
dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.
You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.
linasj said:
You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.
Click to expand...
Click to collapse
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?
wmosquini said:
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?
Click to expand...
Click to collapse
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.
linasj said:
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.
Click to expand...
Click to collapse
But in time to take the assistance, you said what about it? The unit stopped working alone?
wmosquini said:
But in time to take the assistance, you said what about it? The unit stopped working alone?
Click to expand...
Click to collapse
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.
linasj said:
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.
Click to expand...
Click to collapse
Legal, tomorrow I will even take the guarantee to solve as fast as possible. Really the device not the sign of life at all. I will inform you that the device was carrying at night and just when I catch him in the morning, he was like that.
Thank you for your help. : D
My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck
bacitoto said:
My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck
Click to expand...
Click to collapse
hard reset does not remove all traces of root. There is RCT checking. u can be sure that have no traces of root when RCT was reset. On kit kat we have chance to reset it without reflashing. But on 5.0 only reflash
---------- Post added at 11:17 ---------- Previous post was at 11:11 ----------
wmosquini said:
dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.
Click to expand...
Click to collapse
Did u flash it from 5.0 or 4.4? This problem may have solve without service center. But if u have warranty, it must not worry u.
@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.
No, I don't think I ever got this message.
Sent from my LG-D405N using XDA Free mobile app.
pick.orion said:
@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.
Click to expand...
Click to collapse
In my case, the device did not care and neither carried, gave no sign of life. I sent him for assistance in less than one week they made the repair by warranty.