Kindle fire HD7 - Not turning on. - 7" Kindle Fire HD Q&A, Help & Troubleshooting

I have kindle fire 7 HD tablet
I have rooted the kindle fire and installed the CyanogenMod 10.0(android 4.3) for the Kindle Fire HD 7.
I had done a factory reset the cyangemod 10,0 (Android 4.3) . After reset it says rebooting and then its showing kindle fire logo in orange again and again.
boot was not happening its got stucked. i was not able to do anything and tried fastmode mode nothing works for me.
Can anyone please help me to fix this issue to make my tablet to work.?
-----------------
To Fix this
1) i bought a fastboot cable and it works while i connected it to the computer
2) the kindle recovery from the boot loop and its loads in the fastboot mode
3) After that i had user kindle fire bootloader utility to install
4) then before installing the kindle fire was detected by pc
5) i enter the clear cache/ reset cache option in the kindle fire bootloader utility
6) after that my kindle was not detected by pc and also it was not turning on
7) it doesn't show any indication of charging logo.
8) when i connect the kindle to charge it doesn't show any charging logo and my kindle got heated.
9) any idea to recovery my kindle fire HD tablet
I think i had flash the bootloader and everything to install the os .
anyone please help to recovery from this or is there anything to replace in the hardware??

Related

[Q] Kindle Fire HD 8.9 bricked help

Ok i have a Kindle Fire HD 8.9 bricked.. turns on to the kindle fire screen and stays there....
what i have done so far::
1. tried the factory cable with KFHD_SRTv1.3.5 and KFHD_SRT_v2.1
my computer recon. the kindle fire and i can do enable fast boot from KFHD i see the kindle screen goes black then the kindle fire screen comes back up and stays...
2. KFHD_SRTv1.3.5 - option 3,4,5 all work but 1,2 say the failed remote data to large
3. KFHD_SRT_v2.1 - option 1,4 works..2,3 say the failed remote data to large
4. Kindle_Fire_Utility_v0.9.6 won't even work says ADB Status: Offline
am i doing something wrong ??? i am using windows 7
Don't use kindle fire utility on a kfhd u can hard brick it..
I am a bit unsure as to exactly what is going on, did you get it into fastboot mode because it doesn't sound like you did. Keep in mind factory cable isn't the cable your kindle came with, I call them fastboot cables so as not to confuse people with that term. If it is in fastboot mode your kindle should say fastboot in big letters on the screen. If it does get into fastboot and your having this error then I suggest checking to make sure your fastboot drivers are installed since kfu said its offline. Seriously though don't use kfu it can hard brick your device. On another note I just remembered you said this is a kf8.9. If you have adb laying around I suggest running the command on the system restore utility instructions. Then plug your kindle in and power it on, it should go into fastboot from what I have heard about 8.9 inch kindles.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

[Q] KINDLE FIRE HD stuck on TWRP v2.6.0.0 and recogniced in adb mode on pc

Hi, I am very new and I really need some help I was trying to install a custom rom but something went wrong.
Waht I did was.
I first rooted my device,
then I installed the second bootloader TWRP
And I forgot the wifi on, so thw kindle fire HD updated itself and eliminate the super user app.
So I restored the kindle fire hd to ist default in the restore option in the main manu.
then I root it again,
and try to instal the second boot loader again,
but after I installed the second boot loader it never boots up into the kindle fire hd system,
what happends is, in turns on, appears the kinfle fire letter in orange, the aperars kinfle fire letters is blue, then kinfle fire letters in orange again, whit a animation, that use to appear when is about lo load the system, then it reboots itself and repeate the entire process but this time goes into the TWRP second boot loader.
I think I could fix it by just using the backuo files I made o I coul install the custom room I want from there, but the problem is that I cannot load any file to the kindle fire hd because when I connect it the pc it shows as ADB device. Please help me out with this. I would like to you help to restore it to stock or tell how can I transfer files to my kindle fire hd when is in TWRP mode.
I already tried the mount option on the TWRP but the pc does not recognized it as a portabla device where I can store files.
:crying::crying::crying::crying::crying::crying::crying:
If you're in twrp, you can sideload your rom from the advanced menu, as long as your device is recognised as adb.
Sent from my Amazon Kindle Fire HD using xda premium

[Q] Kindle fire HD 7 - Not booting showing logo again and again.

I have kindle fire 7 HD tablet
I have rooted the kindle fire and installed the CyanogenMod 10.0(android 4.3) for the Kindle Fire HD 7.
I had done a factory reset the cyangemod 10,0 (Android 4.3) . After reset it says rebooting and then its showing kindle fire logo in orange again and again.
boot was not happening its got stucked. i was not able to do anything and tried fastmode mode nothing works for me.
Can anyone please help me to fix this issue to make my tablet to work.?
-----------------
To Fix this
1) i bought a fastboot cable and it works while i connected it to the computer
2) the kindle recovery from the boot loop and its loads in the fastboot mode
3) After that i had user kindle fire bootloader utility to install
4) then before installing the kindle fire was detected by pc
5) i enter the clear cache/ reset cache option in the kindle fire bootloader utility
6) after that my kindle was not detected by pc and also it was not turning on
7) it doesn't show any indication of charging logo.
8) when i connect the kindle to charge it doesn't show any charging logo and my kindle got heated.
9) any idea to recovery my kindle fire HD tablet
I think i had flash the bootloader and everything to install the os .
anyone please help to recovery from this or is there anything to replace in the hardware??
mvinothit16 said:
I have kindle fire 7 HD tablet
I have rooted the kindle fire and installed the CyanogenMod 10.0(android 4.3) for the Kindle Fire HD 7.
I had done a factory reset the cyangemod 10,0 (Android 4.3) . After reset it says rebooting and then its showing kindle fire logo in orange again and again.
boot was not happening its got stucked. i was not able to do anything and tried fastmode mode nothing works for me.
Can anyone please help me to fix this issue to make my tablet to work.?
Click to expand...
Click to collapse
You have a soft brick and can only repair it using a Factory cable or adapter.
Sent from my SM-G900T using XDA Premium 4 mobile app
I might mention you should flash cm 11 next time, way more up to date and more bug fixes.
Sent from my Amazon Tate using Tapatalk
I just went through the same thing. I think it's because when I wiped in recovery, I wiped too much. Had nothing to do with the ROM. I was using philztouch recovery.
Sent from my SM-G900T using XDA Premium 4 mobile app

[Q] Kindle Fire HD 7 2012 is stuck on boot screen

I was working on putting CM11 on my Kindle Fire HD when I did a step wrong and I tried to restore to a backup. Unfortunately, I must have done it wrong because now it won't go past the boot screen with the "fire" in orange. I've tried fixing it but I can't seem to communicate to it with ADB anymore. Is my kindle done for?
You need a fastboot cable.
I have a fastboot cable. I've tried using KFHD SRT but all I get is <waiting for device>.
Does it enter fb mode?

Help stuck on kindle fire screen

Hi, my fire is stuck on the first screen when it says Kindle fire in white before the kindle fire screen with the orange fire, when I connect it to the pc nothing happens its not in device manager at all. I used Fireflash to flash TWRP then it wouldn't boot back up any help would be great just don't know what to do as pic will not detect it at all
Cheers

Categories

Resources