Hi there,
in the last days i've tried about 10 to 15 different Vanir ROMS, from stable 4.3.1, to 092614 nightly up to the current 4.4.4 nightly built 100614. There where different problems, but one remains: i can not disable NFC! Even today i flashed my device 5 times, every time with wipe, format, wipe, install, wipe, reboot.
What can i do to disable that horrible piece of crap called NFC?
Does everyone have a tip how to disable it or have a recommendation which Vanir version i should use?
Thanks in advance
Schappenberg
schappenberg said:
Hi there,
in the last days i've tried about 10 to 15 different Vanir ROMS, from stable 4.3.1, to 092614 nightly up to the current 4.4.4 nightly built 100614. There where different problems, but one remains: i can not disable NFC! Even today i flashed my device 5 times, every time with wipe, format, wipe, install, wipe, reboot.
What can i do to disable that horrible piece of crap called NFC?
Does everyone have a tip how to disable it or have a recommendation which Vanir version i should use?
Thanks in advance
Schappenberg
Click to expand...
Click to collapse
you should be able to disable it after restarting once after flashing. so flash, boot rom to homescreen, reboot then disable.
Yesterday i solved my problem with NFC:
i just put a piece of tape on the NFC antenna contacts, so the phone doesn't recognized the antenna and i was able to disable NFC. No NFC -> no battery drain!
One problem solved (or so ...) and other appeared: today i couldn't hear my phone partner, like in the newer Vanir versions I've tried, i thought this problem just appear in the current 10xx14 Vanir versions because of a CM bug? After a reboot it worked. Is there a solution how to solve this problem or which version should i use which are not affected? Currently i use 092614 ...
Related
Yoh guys,
I will tell my problem short and quick:
I was using the Vanir Custom Rom 4.4.2 with normal gapps and was updating it once a week.
One day my connection was gone (wasn't able to make any phone calls, sending sms and
using the mobile data). So I was looking for some information and figured out that Android
4.4.4 was released a few weeks ago. So I tought there was a complication between the
android version I was using and the gapps. So I did a factory, cache and dalvik cache reset,
flashed the new Vanir version and installed the right gapps. But the problem still occured.
What i've tried:
1. Different Sim Cards. Tried another sim for about 30 minutes, no problem there while
I was still using the Vanir rom.
2. Using different Roms with the old sim card, the A.I.C.P. rom for example but the problem
got even worse.
3. Yesterday I installed the Lego Rom with 4.4.4 and using slim gapps 4.4.3, the problem
seems fixed so far. It occured only once today.
4. Just in case to make sure, I tried the Beanstalk Rom with 4.4.4 and the correct gapps for.
Somehow I had better connection with this rom than with the Lego one.
I stick to the Lego Rom now but it runs way smoother than the Beanstalk for me. Also I like
the theme when the play store is black instead of white .
My question now is, did some1 had the same issues? Or even better if some1 has a
resolution for it.
Thx and Regards,
Haven't you clearly stated and figured out that the problem is with your sim card?
No m8,
I can't be sure of that :/ I just found this thread a few min ago:
http://forum.xda-developers.com/showthread.php?t=2757655&page=4
Everybody's got different ril problems
During your trials you said that using a different sim card didn't give any problems for the time running.
Can't you check that out first since most carriers will change sim for no price?
After that you can try changing ril using flying_bear's tutorial
I have the same issue....I tried FluidRom Omnirom CM, the last Beanstalk...sometime the network doesn't work.
Hi all, love this forum but dont post often.
Heres the problem: My HTC One m7 (international version) is acting strange:
* Sometimes when I turn on the display I have to enter my sim pin, as if it had rebooted itself, only I know it hasnt. It also happens regurarly when Im using the phone *poff* all of a sudden "enter sim pin".
* When switching from wifi to 3g/LTE it lags for minutes. It drops all connections, including regular gsm, and I have to enter sim pin maybe half the time I swith from wifi. Switching from 3g/LTE to wifi doesnt present the same issues.
* Its extremely laggy when these things happen, otherwise it works fine.
What I have tried so far:
* Old backup of Liquidsmooth 4.4. Works fine for a few days then these same problems starts occuring.
* Uninstalling apps. Thought I was onto something when I uninstalled SwiftKey and it worked perfectly for about 3 days! But then the problems came back...
* Tried other roms but I usually end up with the "unfortunately the process com.android.systemui has stopped" when the rom is up and fully booted. Its a loop that just continues (when pressing ok) so I cant do anything but reboot and try again. I tried probably 5 versions of Liquidsmooth but also Beanstalk and other aosp roms, even Lollipop versions (the liquidsmooth one worked but the same sim pin problems occurred). Havent tried any sense based roms. Also tried several versions of TWRP, official and unofficial. Still ends up with the com.android.systemui problem.
* Tried resetting permissions, wipe cache/dalvik and also wiped the entire sdcard. Used adb/flash to transfer new rom for installation.
So I'm basically out of ideas and pondering going back to stock and sending it in for repair, unless someone here has some tips since I'd rather try myself first.
Thanks for any help or input!
koolkeith said:
Hi all, love this forum but dont post often.
Heres the problem: My HTC One m7 (international version) is acting strange:
* Sometimes when I turn on the display I have to enter my sim pin, as if it had rebooted itself, only I know it hasnt. It also happens regurarly when Im using the phone *poff* all of a sudden "enter sim pin".
* When switching from wifi to 3g/LTE it lags for minutes. It drops all connections, including regular gsm, and I have to enter sim pin maybe half the time I swith from wifi. Switching from 3g/LTE to wifi doesnt present the same issues.
* Its extremely laggy when these things happen, otherwise it works fine.
What I have tried so far:
* Old backup of Liquidsmooth 4.4. Works fine for a few days then these same problems starts occuring.
* Uninstalling apps. Thought I was onto something when I uninstalled SwiftKey and it worked perfectly for about 3 days! But then the problems came back...
* Tried other roms but I usually end up with the "unfortunately the process com.android.systemui has stopped" when the rom is up and fully booted. Its a loop that just continues (when pressing ok) so I cant do anything but reboot and try again. I tried probably 5 versions of Liquidsmooth but also Beanstalk and other aosp roms, even Lollipop versions (the liquidsmooth one worked but the same sim pin problems occurred). Havent tried any sense based roms. Also tried several versions of TWRP, official and unofficial. Still ends up with the com.android.systemui problem.
* Tried resetting permissions, wipe cache/dalvik and also wiped the entire sdcard. Used adb/flash to transfer new rom for installation.
So I'm basically out of ideas and pondering going back to stock and sending it in for repair, unless someone here has some tips since I'd rather try myself first.
Thanks for any help or input!
Click to expand...
Click to collapse
maybe your sim is faulty. try to get a new one from your provider. or it just has a bad contact in your phone.
about the lagging: did you try a clean flash? is your storage full? my phone gets pretty laggy when my storage is nearly full..
Hey thanks for your reply! However I dont think its the sim card, and as I mentioned I clean flashed several times with several twrp version and also twice with wiping all data on my sdcard...
Sorry if I can't offer a concrete solution, but I had similar issues (especially the first one, but also lag when switching networks) on my HOX+. Turns out it was the sim.
Try to test another sim before returning, and at least try a sense based rom. Since you say that it works without problem for a few days with Liquidsmooth 4.4, and then it starts breaking again, it may be rom (aosp?) related. But then again, it may be just random.
Hope you figure it out soon
Thanks akpe! I ordered a new sim card, if that doesnt help I suppose its something hardware related...
Well, the new sim card didnt help. My problem seem very similar to this: http://www.androidpolice.com/2013/0...rops-on-some-nexus-4-handsets-fixes-in-sight/
Basically my whole radio disconnects and restarts itself when turning off wifi. Reading that androidpolice thread leads me to thinking about flashing an earlier firmware, from 4.2.2. I have no idea which one, or if I can use the one in that thread or not.
Any suggestions? I'd appreciate it, googling for hours and reading catlogs for days isnt getting me anywhere..
HELP!
Hmm wasn't that a Google issue which got fixed by HTC in the latest OTA? Try a ROM which has the hotfix (like latest ViperOne, 7.0.2) and see if you still get this
akpe said:
Hmm wasn't that a Google issue which got fixed by HTC in the latest OTA? Try a ROM which has the hotfix (like latest ViperOne, 7.0.2) and see if you still get this
Click to expand...
Click to collapse
Hi akpe! I took your advice and am now running ViperOne 7.0.2 and so far it WORKS! So it seems it was indeed that google bug. HUGE THANKS!
Is it possible to have the aosp lockscreen when at the same time using a pin? I can't seem to figure that out.
Thanks again!
Glad it worked
As for the lockscreen, no idea mate, I'm using the stock one :/ Ask around in the ViperOne thread, maybe someone there knows
Ok, thanks again!
Another thing I cant find is profiles? Need it to make whatsapp notification sound silent when listening to music..
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
No any Response:S
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Get the newest Jcsullins CM11 build
hsroomi said:
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
Click to expand...
Click to collapse
gtallmadge said:
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Click to expand...
Click to collapse
Yep thats right, the more info the better when reporting problems and make sure you've got the most up to date rom. Full guides can be found in my signature below.
Get the most updated Jcsullins Rom here cm-11-20150113-SNAPSHOT-jcsullins-tenderloin
I have this same issue, wifi works fine on lollipop, but not on cm11, i originally used tp toolbox to remove webos, resize partitions and flash lollipop. I tried going to cm11 for full functionality and wifi would not work, i tried 3 different cm11 based roms and none worked, i went back to lollipop and wifi worked right away.
Hello Guys,
I have been facing a serious problem ever since I updated my Mi3 to latest developer version. My 3g internet isn't working. I have tried all the possible trouble shooting like reinstalling the OS both stable and developer, clearing cache lot of times, reinserted the sim couple of times. I even tried to flash a lower version but it didn't help.
Initially i was on custom LP with extended partition on TWRP recovery and everything was working flawlessly. I reverted back to stock partition and now using CWM recovery with miui 6 developer version.
On the other hand the wifi works perfectly no issues with it. Not sure whether its a bug or i am missing something.
I would highly appreciate if a solution can be found and i can start using my internet data.
Thanks
Hy guys,
I'm facing some issues with my Z3C. I bought it 2 weeks ago, unlocked bootloader, installed twrp, flashed CyanogenMod 12.1 Nightly on day 3. Updated CM twice with OTA since then.
My problem is that the "sim" card (GSM/LTE) is randomly not noticed by my phone, like if its removed. I checked the sim tray, everything is stable and well seated, the sim is also OK, never had an issue with it. I just have it in my pocket or on the desk, pick it up to do something and there is already a No SIM icon on the status bar, and "Emergency calls only" If I lock the phone. Only a restart solves it.
I could not find any noticeable trigger which would lead me to the source of the problem. Sometimes its OK for 2 days sometimes it happens 2 times a day. The really frustrating part is that when the sim "disconnects" the phone starts to heat up significantly. I usually only notice it because my phone is burning my pocket. Also it looses around 20% battery before I notice it. After the restart everything is fine, the phone cools down.
Went to the Cyanogen forums for some possible solution for the problem, they suggested that I should try to update my baseband to the latest version, and if that still doesn't help, do a full wipe / clean install of CM nightly. I tried downloading the latest firmware using FlashTool and XperiFirm, creating an ftf, and flashing only AMSS_FSG, AMSS_FS1, AMSS_FS2 included into the flash ( I only wan't to flash the baseband ?!?).
My question would be: Anyone else had this problem and managed to fix it somehow? If not, anyone could please help me with a small guide how to ONLY update the baseband of my Z3C (D 5803) running CM 12.1 nightly on twrp recovery?
When I tried the flash above, my baseband version did not change. Currently I'm on "8974-AAAAANAZQ-00005-40" Baseband version, and I would like to move to the latest most stable one.
Thanks for the help in advance!
If it were my Z3c, I would flash back to stock completely and then reflash with Cyanogen. This is a device on which you have the freedom to do that, and that gets the job done safely. Backup your CM install, and then flash everything.