Related
Hello mates,
I just want to switch back to stock firmware just downloaded the B133 maybe i will upgrade to EMUI.3.0 manually but i have twrp installed how can i flash the stock firmware? which is not in zip file its dload/update.app
can someone please guide me?
.
Thanks and blessing
Farrukh
FarrukhQadri said:
Hello mates,
I just want to switch back to stock firmware just downloaded the B133 maybe i will upgrade to EMUI.3.0 manually but i have twrp installed how can i flash the stock firmware? which is not in zip file its dload/update.app
can someone please guide me?
.
Thanks and blessing
Farrukh
Click to expand...
Click to collapse
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
B609 Stock recovery - Download here
Best regards,
James
Daentrod said:
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
B609 Stock recovery - Download here
Best regards,
James
Click to expand...
Click to collapse
Thanks a lot i will do it tonight
FarrukhQadri said:
Thanks a lot i will do it tonight
Click to expand...
Click to collapse
when i execute the adb reboot boat loader command my device won't gets into boat loader but it reboot i tried rebooting into boat loader by flashify app it shows a screen fastboot rescue mode. (phone is unlocked)
i can flash the recovery.
whats wrong ??
FarrukhQadri said:
when i execute the adb reboot boat loader command my device won't gets into boat loader but it reboot i tried rebooting into boat loader by flashify app it shows a screen fastboot rescue mode. (phone is unlocked)
i can flash the recovery.
whats wrong ??
Click to expand...
Click to collapse
That is exactly what you need - adb reboot bootloader (<- it's one word!) gets the phone into fastboot mode (same as flashify). From here you can flash the recovery. On the PC, run fastboot flash recovery <path-to-stock-recovery>. This will get you the stock recovery on the phone. Now you can use the 3 button method to flash the stock ROM.
g4b3rm4n said:
That is exactly what you need - adb reboot bootloader (<- it's one word!) gets the phone into fastboot mode (same as flashify). From here you can flash the recovery. On the PC, run fastboot flash recovery <path-to-stock-recovery>. This will get you the stock recovery on the phone. Now you can use the 3 button method to flash the stock ROM.
Click to expand...
Click to collapse
Can you please guide me a bit more actually now my device is not booting into recovery neither into system its stuck on logo and not going ahead. so should i follow these steps only flash stock recovery in fastboot then flash stock rom?
my phone is stuck on logo and it remains on the logo screen for a couple of seconds then it reboots itself automatically and keep doing the same..
Thanks
FarrukhQadri said:
Can you please guide me a bit more actually now my device is not booting into recovery neither into system its stuck on logo and not going ahead. so should i follow these steps only flash stock recovery in fastboot then flash stock rom?
my phone is stuck on logo and it remains on the logo screen for a couple of seconds then it reboots itself automatically and keep doing the same..
Thanks
Click to expand...
Click to collapse
You must get it into fastboot mode. If the phone restarts and does not boot into the OS, then it's a huge problem. You may try to restore the phone with HiSuite, but my bet is that you'd better get it to a service - you probably flashed the wrong bootloader.
You might have luck with the recovery though - hold down VOLUME UP and POWER when turning the device on. This might get you ADB, so you might boot into fastboot mode.
g4b3rm4n said:
You must get it into fastboot mode. If the phone restarts and does not boot into the OS, then it's a huge problem. You may try to restore the phone with HiSuite, but my bet is that you'd better get it to a service - you probably flashed the wrong bootloader.
You might have luck with the recovery though - hold down VOLUME UP and POWER when turning the device on. This might get you ADB, so you might boot into fastboot mode.
Click to expand...
Click to collapse
Let me have a try i will get back to you. i had this problem with my previous phone but this time its getting so long i'm worried of it, yes my bad i have flashed a wrong kernel mistakenly it was on the phone so i flashed the wrong file.
FarrukhQadri said:
Let me have a try i will get back to you. i had this problem with my previous phone but this time its getting so long i'm worried of it, yes my bad i have flashed a wrong kernel mistakenly it was on the phone so i flashed the wrong file.
Click to expand...
Click to collapse
You are right i have to get it to service its not working at all cant even find in fastboot neither in recovery .. this goes so expensive
Press power, volume-down and connect device to PC simultaneously. You will get into fastboot mode. Flash boot image and recovery image that was exactly from your firmware version.
Kostyan_nsk said:
Press power, volume-down and connect device to PC simultaneously. You will get into fastboot mode. Flash boot image and recovery image that was exactly from your firmware version.
Click to expand...
Click to collapse
can you please share drivers link? i have booted into fastboot and adb installed already but it cant find my device ..
Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...
how?
FarrukhQadri said:
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...
Click to expand...
Click to collapse
How?
jefpcbr said:
How?
Click to expand...
Click to collapse
THAT HOW , FORGET some crap TWRP ! it is no use with huawei devices !
Simona Simmy said:
THAT HOW , FORGET some crap TWRP ! it is no use with huawei devices !
Click to expand...
Click to collapse
but i think twrp is better than cwn
FarrukhQadri said:
but i think twrp is better than cwn
Click to expand...
Click to collapse
What ? In waht way god..
Same purpose .. no better at all it will destroy your phone soon..
killed my phone
Daentrod said:
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
Best regards,
James
Click to expand...
Click to collapse
Hi.
This killed my mobile.
Now I can't boot in, I i can have is the bootloader screen saying ur phone is locked
Please someone help.
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
OK, i got it work!
00471 said:
OK, i got it work!
Click to expand...
Click to collapse
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Salman Al-Badgail said:
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Click to expand...
Click to collapse
of course, i wanted to do it but didnt have time, ill update OP with solution
00471 said:
of course, i wanted to do it but didnt have time, ill update OP with solution
Click to expand...
Click to collapse
Thanks :good:
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
Tried exactly as you say, STILL Software install failed.
Can you send me link which system you are trying to flash? Maybe you have just bad package
Odoslané z HUAWEI GRA-L09 pomocou Tapatalku
Can't get it to work
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
T1mb3 said:
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
Click to expand...
Click to collapse
Actually i do, i bricked my phone one after that later, and this helped: http://www.huawei-info.de/p8-mm-rollback flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
00471 said:
Actually i do, i bricked my phone one after that later, and this helped: xx flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
Click to expand...
Click to collapse
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
T1mb3 said:
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
Click to expand...
Click to collapse
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
00471 said:
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
Click to expand...
Click to collapse
There is no cust in the update.app
T1mb3 said:
There is no cust in the update.app
Click to expand...
Click to collapse
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
00471 said:
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
Click to expand...
Click to collapse
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
T1mb3 said:
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
Click to expand...
Click to collapse
No problem, let me know if you solve it
00471 said:
No problem, let me know if you solve it
Click to expand...
Click to collapse
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
T1mb3 said:
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
Click to expand...
Click to collapse
Glad it worked!
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Qqman55 said:
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Click to expand...
Click to collapse
If you are on 5.0.1 with root and twrp then you are good, or do you want try BETA? if yes then you need stock recovery flash before flashing beta
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
can you upload stock recovery of b313?
Dear XDA members,
Maybe someone could help me.
I was using the beta Nougat on my 5C (7lite - NEM-L21) and I decided I would like root. I installed Nougat TWRP and went well then I've encountered problem when installing supersu.zip - data problems, so I googled (damn google specialists) so I wiped system and DATA. I left myself without any operating system. So I managed to instal Lineage 13 for P9lite-Honor 5C.
But no, that was not enough, I tried again to install the beta update + patch for NEM-21... And thats it no more Lineage 13 no more nothing. After that I have installed TWRP through ADB and I could not go into it. So again google - I managed somehow to install original B132 firmware (before it I installed recovery taken out of B132) and it go through installation with success.
Unfortunately that's it - phone stays in the HONOR logo and nothing more - ah yes I did clean to factory through Honor original recovery.
Can ANYONE help me solve my problem, or you think it's a lost cause?:good:
dload method should work.
thelous said:
dload method should work.
Click to expand...
Click to collapse
Unfortunately should work doesn't apply to my case
I will have to send it to Service in Huawei.
If anyone encounters my problem please use method passed by fellow xda member y4c1ne .
1- Extract the update.zip from this thread, u'll find an Update.app. Open it using huawei update extractor, and then extract BOOT.img, RECOVERY.img, SYSTEM.img to adb folder.
2- Boot your phone into bootloader (shut it down, press volume down - then connect it to your computer)
3- Flash the files extracted from UPDATE.APP using these commands
Code:
-fastboot flash boot BOOT.img
-fastboot flash recovery RECOVERY.img
-fastboot flash system SYSTEM.img (this will take some time so be patient).
Again thanks for help: y4c1ne
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
Hi
At begining i must say, sorry, my english is bad! :laugh:
i brick my phone, so i unlock bootloader, flash recovery.
Then i enter TWRP, select storage>sdcard> flash recovery.img as boot .... i dont know why i made this step xD
And now, when i try to back to stockROM, i open TWRP\Install\Select Storage\ and, only what i can say is "Internal Storage(0 MB)"
So, dload cant help to back my stock ROM, because phone doesn't have internal memory.
So, for begin, i need to dellete TWRP from default boot.
Help
axe30 said:
Hi
At begining i must say, sorry, my english is bad! :laugh:
i brick my phone, so i unlock bootloader, flash recovery.
Then i enter TWRP, select storage>sdcard> flash recovery.img as boot .... i dont know why i made this step xD
And now, when i try to back to stockROM, i open TWRP\Install\Select Storage\ and, only what i can say is "Internal Storage(0 MB)"
So, dload cant help to back my stock ROM, because phone doesn't have internal memory.
So, for begin, i need to dellete TWRP from default boot.
Help
Click to expand...
Click to collapse
Switch the phone off, connect to PC - must have drivers and ADB installed.
Boot by Volume- & Power - must boot to Fastboot.
Flash boot.img - corresponding to your installed ROM, to the boot partition.
You can use Firmwsre Finder - from PC or another Android to download update.zip (FullOTA, corresponding to your ROM), unzip and extract boot.img from update.app by using Huawei Update Extractor on the PC.
And take care what you flash and where
axe30 said:
Hi
At begining i must say, sorry, my english is bad! :laugh:
i brick my phone, so i unlock bootloader, flash recovery.
Then i enter TWRP, select storage>sdcard> flash recovery.img as boot .... i dont know why i made this step xD
And now, when i try to back to stockROM, i open TWRP\Install\Select Storage\ and, only what i can say is "Internal Storage(0 MB)"
So, dload cant help to back my stock ROM, because phone doesn't have internal memory.
So, for begin, i need to dellete TWRP from default boot.
Help
Click to expand...
Click to collapse
I think this is going to help:https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279:good:
zgfg said:
Switch the phone off, connect to PC - must have drivers and ADB installed.
Boot by Volume- & Power - must boot to Fastboot.
Flash boot.img - corresponding to your installed ROM, to the boot partition.
You can use Firmwsre Finder - from PC or another Android to download update.zip (FullOTA, corresponding to your ROM), unzip and extract boot.img from update.app by using Huawei Update Extractor on the PC.
And take care what you flash and where
Click to expand...
Click to collapse
Already try, but still don't have internal memory and booting TWRP.
mrleja said:
I think this is going to help:https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279:good:
Click to expand...
Click to collapse
This method help me, so i unbrick phone but i stuck on NRD90M test-keys.
And i have problem, i run dload, and install update. After that i stuck on boot, and only can open fastboot. I try to flash many of recoveries via fastboot, but didn't help.
axe30 said:
This method help me, so i unbrick phone but i stuck on NRD90M test-keys.
And i have problem, i run dload, and install update. After that i stuck on boot, and only can open fastboot. I try to flash many of recoveries via fastboot, but didn't help.
Click to expand...
Click to collapse
Tri puta ti saljem odgovor na PM,ali izgleda da nešto nije u redu,ako imas Viber ili WhatsApp,posalji mi broj telefona na PM,pa cu te zvati.