Database Develop

back to stock recovery

Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers

deepsnoozer said:
Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers
Click to expand...
Click to collapse
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app

87insane said:
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.

Superwitschi said:
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.
Click to expand...
Click to collapse
Only flash recovery.img with flashify?
Not flash recovery2.img?

yes only the recovery.img!!!!

Superwitschi said:
yes only the recovery.img!!!!
Click to expand...
Click to collapse
Ok thanks...

Dear all. Iam back to stock thabk you so much. Oh btw i used abd

deepsnoozer said:
Dear all. Iam back to stock thabk you so much. Oh btw i used abd
Click to expand...
Click to collapse
Mate, please describe how you did it with ADB in detailed

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
Standard doing....
Sent from my HUAWEI P7-L10 using XDA Free mobile app

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
The same way you have flashed TWRP.

DJ BlackEagle said:
The same way you have flashed TWRP.
Click to expand...
Click to collapse
Hi,
I need help... I'm trying to go back to stock recovery & firmware, I have already tried everything and I'm absolutely fustrated:crying::crying::crying:
1.- I had TWRP recovery and MIUI, the phone (ASCEND P7-L10) is rooted
2.- After downloading flashify and the stock recovery, I have installed the stock recovery, everything OK.
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
If I try to install any ROM B120, B126, B133, B135... I always get the same error, "cust fail"
If I reboot the phone still has MIUI... but I need to restore to factory recovery/firmware...
Help needed, I'm going to hit the roof...
thanks in advance!

Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.

siasegos said:
...
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
...
Click to expand...
Click to collapse
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.

Ziolek67 said:
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.
Click to expand...
Click to collapse
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help

siasegos said:
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2920167

Thanks, already flashed again recovery , boot and cust
Now forcing update vol+ vol- power
we'll see. Anyway, thanks a lot!

siasegos said:
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option)
I had many times this error while reverting my B135 after MIUI ROM.

Ziolek67 said:
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option) .
Click to expand...
Click to collapse
Well, after flashing again recovery, boot, cust and forcing an update... I get the same fuc**** error, mm... As you have told me, I guess I do not have the right files for my Vodafone Spain P7-L10
I'm going to look for the right firmware, thanks a lot!!!
==== SEVERAL ATTEMPS LATER AND SOME HOURS LATER... SOLVED!!! ====
I've made svarious attemps with diferent ROMs, B126 and B121, while I was downloading original stock ROM from Huawei.
All of these attemps have failed, even flashing cache, userdata and system
But after downloading original stock rom, as soon as I have flashed cust everything started to work perfectly, wipes... firmware...
So, THAAAAANKS A LOOOOOOOT!

Superwitschi said:
Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.
Click to expand...
Click to collapse
hi i have the same problem, if i put my 133 d load in my sd card, the phone go however in twrp...
there is a way to install d load or a firm stock from twrp?

I did it!
I've finally did it!
Huawei has released an official downgrade ROM (B603) here (russian site):
http://download-c.huawei.com/download/downloadCenter?downloadId=38601&version=66144&siteCode=ru
You'll also need this official EMUI 3.0 recovery image:
https://mega.co.nz/#!ZZ9QxIiL!Cn4mV2ZG2zzFc956CoWQh4BnBQqyK4rClghlY8CoXQk
As well as fastboot/ADB (platform tools) files here:
https://www.androidfilehost.com/?fid=9390355257214632011
Now here's how you do it.
Copy the dload folder (found in ROM) to the root of your SD Card
Now turn off your phone
While off press and hold Vol Down & Power Key, when screen turns on release Power Key, but keep holding the Vol Down key until you see a white screen (fastboot mode)
Now decompess files from platform tools to a new folder called ADB on your desktop for example
Hold down Shift and right click on ADB folder on your Desktop and choose "run command windows here", a little black window should pop up
Now type:
fastboot devices - this is to check if your phone is correctly detected (if not, then drivers are needed. Just install HiSuite)
fastboot flash recovery stockEMUI3.0RECOVERY.img
fastboot reboot
Your phone will now boot into your current OS. Go to Settings>Updates>Local Update
This will install the downgrade ROM from russian Huawei site (B603)
After this is installed your phone will boot into your current OS again. This time delete UPDATE.APP from dload folder and put your stock firmware in there.
Now repeat the process Settings>Update>Local Update
This time it will finally install that stock KitKat with EMUI 2.3 OMG !!! Finally !!!
God i hope i'll never have to do this again

Bootloop in Mate S

Hi,
I wanted to flash MM beta on my Mate S CR09. I succeded in flashing B145 and then when I tried flashing MM my phone is stack in bootloop on Huawei logo. I can go to recovery and go to menu flash via power + volume +/-. But every time i try this it shows "Software install failed".
What should i do to run my device ?
Regards

IgorFace said:
Hi,
I wanted to flash MM beta on my Mate S CR09. I succeded in flashing B145 and then when I tried flashing MM my phone is stack in bootloop on Huawei logo. I can go to recovery and go to menu flash via power + volume +/-. But every time i try this it shows "Software install failed".
What should i do to run my device ?
Regards
Click to expand...
Click to collapse
is the update.zip in your /dload/ folder??

brumgav said:
is the update.zip in your /dload/ folder??
Click to expand...
Click to collapse
it should be zip or unzip update.app ?
I have putted unzipp update.app

IgorFace said:
it should be zip or unzip update.app ?
I have putted unzipp update.app
Click to expand...
Click to collapse
I think you should put the update.zip in the /dload/ folder
but you need to extract that from the zip, if you open the zip file you will see a dload folder already, just put that at the root of your phone internal storage

brumgav said:
I think you should put the update.zip in the /dload/ folder
but you need to extract that from the zip, if you open the zip file you will see a dload folder already, just put that at the root of your phone internal storage
Click to expand...
Click to collapse
I did that already, but notification is still the same "software install failed" i tried to flash B145 and B114

IgorFace said:
I did that already, but notification is still the same "software install failed" i tried to flash B145 and B114
Click to expand...
Click to collapse
Try making sure the MM Beta update you down is just called update.zip and put that in /dload/
then go to settings...update...press menu and select local update....and then you can choose the update you want to apply

brumgav said:
Try making sure the MM Beta update you down is just called update.zip and put that in /dload/
then go to settings...update...press menu and select local update....and then you can choose the update you want to apply
Click to expand...
Click to collapse
I can't get into settings. My phone do not start

IgorFace said:
I can't get into settings. My phone do not start
Click to expand...
Click to collapse
Oh yes sorry.
Try placing the original download...named update.zip in /dload/ (don't extract any items from the zip) and then restart device whilst volume + and - is pressed at the same time
Also try a factory reset if you can't get passed boot...do that by pressing volume + when u restart
Also try downloading files again I've had corrupt downloads very often.
Read the threads about extracting boot.IMG, cust.IMG, system.IMG and recovery.IMG from the B145 update.app file using huaweiupdateextractor....it may help

brumgav said:
Oh yes sorry.
Try placing the original download...named update.zip in /dload/ (don't extract any items from the zip) and then restart device whilst volume + and - is pressed at the same time
Also try a factory reset if you can't get passed boot...do that by pressing volume + when u restart
Also try downloading files again I've had corrupt downloads very often.
Read the threads about extracting boot.IMG, cust.IMG, system.IMG and recovery.IMG from the B145 update.app file using huaweiupdateextractor....it may help
Click to expand...
Click to collapse
Could you do some small tutorial how to flash via fastboot ? I found this post and i don't know exacly what should i do:
bgx said:
I boot into fastboot and flash via fastboot cust.img, boot.img, recovery.img, system.img, data.img (Hope that I haven't forget something) from the B145 full firmware extracted with huawei extractor.
Then reboot and do a full factory reset with stock recovery.
Reboot and then do the partialupdate B303.
After that again full factory reset.
And then it worked!
Click to expand...
Click to collapse
How to do this ?

IgorFace said:
Could you do some small tutorial how to flash via fastboot ? I found this post and i don't know exacly what should i do:
How to do this ?
Click to expand...
Click to collapse
You can watch this video to see how to do it.
https://youtu.be/XslByDoP_p8

brumgav said:
You can watch this video to see how to do it.
https://youtu.be/XslByDoP_p8
Click to expand...
Click to collapse
Is there anyway to unlock my bootloader without access to dial ? I can't get my Product ID. In fastboot i've got notification Phone is locked

IgorFace said:
Is there anyway to unlock my bootloader without access to dial ? I can't get my Product ID. In fastboot i've got notification Phone is locked
Click to expand...
Click to collapse
Not that I know of...only possible in 5.1.1 or in the b321 update I think

brumgav said:
Not that I know of...only possible in 5.1.1 or in the b321 update I think
Click to expand...
Click to collapse
ok i have key, but now i dont know how to enable FRP because it's locked and i can't flash via fastboot

IgorFace said:
ok i have key, but now i dont know how to enable FRP because it's locked and i can't flash via fastboot
Click to expand...
Click to collapse
As far as I know, you need to go to settings and enable - OEM Unlock....but this option is only available in 5.1.1...its not available in B303 Beta...however it does return in B321 Beta.
However as you cant turn phone on you wont be able to get to settings...so you cant unlock bootloader

NEM-L21 bricked, bootlooped after trying to go back to 6.0

Dear XDA members,
Maybe someone could help me.
I was using the beta Nougat on my 5C (7lite - NEM-L21) and I decided I would like root. I installed Nougat TWRP and went well then I've encountered problem when installing supersu.zip - data problems, so I googled (damn google specialists) so I wiped system and DATA. I left myself without any operating system. So I managed to instal Lineage 13 for P9lite-Honor 5C.
But no, that was not enough, I tried again to install the beta update + patch for NEM-21... And thats it no more Lineage 13 no more nothing. After that I have installed TWRP through ADB and I could not go into it. So again google - I managed somehow to install original B132 firmware (before it I installed recovery taken out of B132) and it go through installation with success.
Unfortunately that's it - phone stays in the HONOR logo and nothing more - ah yes I did clean to factory through Honor original recovery.
Can ANYONE help me solve my problem, or you think it's a lost cause?:good:

dload method should work.

thelous said:
dload method should work.
Click to expand...
Click to collapse
Unfortunately should work doesn't apply to my case
I will have to send it to Service in Huawei.

If anyone encounters my problem please use method passed by fellow xda member y4c1ne .
1- Extract the update.zip from this thread, u'll find an Update.app. Open it using huawei update extractor, and then extract BOOT.img, RECOVERY.img, SYSTEM.img to adb folder.
2- Boot your phone into bootloader (shut it down, press volume down - then connect it to your computer)
3- Flash the files extracted from UPDATE.APP using these commands
Code:
-fastboot flash boot BOOT.img
-fastboot flash recovery RECOVERY.img
-fastboot flash system SYSTEM.img (this will take some time so be patient).
Again thanks for help: y4c1ne

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

[TIPS] Revert Custom Rom to Official and untouched - Hard restore

Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!

hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD

macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.

Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone

In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..

Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...

You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).

Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.

What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)

Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.

I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)

Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?

islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.

Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...

islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?

Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?

islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.

Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you

Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!

Hi,
I followed your guide and it works perfectly thanks!