Database Develop

[Q&A] [ROM][PORT][11.10] OnePlus One Stock ROM | CM11S | v8 | All Variants Supported

[Q&A] [ROM][PORT][11.10] OnePlus One Stock ROM | CM11S | v8 | All Variants Supported
Q&A for [ROM][PORT][11.10] OnePlus One Stock ROM | CM11S | v8 | All Variants Supported
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Will support 802w or 802d? I hope it so much!

Hi dd98,
Is it possible, port this rom's audio libs and all other audio stuff to other roms like sense based or aosp? Sound is very loud and clear. I never heard sound like that on my M7 before. Lots of rom,mod,irs tried but this is amaaaazing :highfive:

Waiting for 8.5
Hi DD,
I can confirm that v8.1 wont flash on TWRP 2.7.1.1
fyi,

I have rooted my 64 GB oneplus one and I only have xposed module but all of a sudden when I went into twrp and tryed to flash another ROM it kept saying error data storage or something like that so I turned my phone off and went back into twrp and restored my phone to the cyanogenmod main ROM and for some odd reason my service doesn't work... I used every method I factory reset my rom and still no service got a new sim card still nothing but I found out that the airplane mode keeps flicking on and off .. My WiFi works but not my data .. Idk if I should format the data in twrp .. Idk what to do HELP...
Sent from my A0001 using XDA Premium 4 mobile app

[Deleted]

JustCreateYou said:
I have rooted my 64 GB oneplus one and I only have xposed module but all of a sudden when I went into twrp and tryed to flash another ROM it kept saying error data storage or something like that so I turned my phone off and went back into twrp and restored my phone to the cyanogenmod main ROM and for some odd reason my service doesn't work... I used every method I factory reset my rom and still no service got a new sim card still nothing but I found out that the airplane mode keeps flicking on and off .. My WiFi works but not my data .. Idk if I should format the data in twrp .. Idk what to do HELP...
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you have an actual OnePlus1 phone your in the wrong place
this is a Rom thread for the HTC One

wz11123 said:
Will support 802w or 802d? I hope it so much!
Click to expand...
Click to collapse
no i dont intend to support dual sim variants

What firmware do people use with this rom, and asop roms in general?
I am in the latest firmware available but get some WiFi issues on lots of roms. I wonder if my firmware is the problem.
Thanks.
Sent from my One

v8.0
nedd1 said:
What firmware do people use with this rom, and asop roms in general?
I am in the latest firmware available but get some WiFi issues on lots of roms. I wonder if my firmware is the problem.
Thanks.
Sent from my One
Click to expand...
Click to collapse
Currently i/we are on v8.1 just follow the instruction of DD on the first page dont need gapps its pre-installed on his ROM.

Work without s-off?
Is there any chance this rom will work without s-off? I have like the newest version of hbboot and I can never seem to get s-off to work. Really wanted to try this rom out.

patrickboston said:
Is there any chance this rom will work without s-off? I have like the newest version of hbboot and I can never seem to get s-off to work. Really wanted to try this rom out.
Click to expand...
Click to collapse
Well if you have twrp installed, why not backup your current ROM and give it a whirl.

Play service error
I've problems with Gapps. every time i reboot my phone i've a "google play service stopped working" error. now i cant connect to the store. some solutions?

Hulu issue with this rom?
I have tried this rom several times and I have found that everything works great except for Hulu. When I resume a movie or show, instead of starting where I left off, it starts to buffer then it starts back at the beginning. I have only had this happen with this rom. Has anyone else had this problem?

Gapps FC =(
Hello All, I just flashed TWRP 2.7.1.1, mounted system and cache, and Flashed this rom. Bootup was phenomenal. Once I got in, I got Google Location and Gapps FC. I dismissed them and proceeded into the rom. Everything else was perfect besides the occasional gapps FC popup. I attempted to connect to my google account in settings->accounts->google, but it keeps showing FC. Anybody have any idea what to do? Thanks a lot in advance, take care all.

How to install add-ons
I've installed the rom in my HTC M7, but I don't really know how to install the add-ons. In literally new in this, and I think I should flash the kernel using fastboot, but I'm not so sure. Could you please guide me through? Thank you

I don't see any option to customize lock screen. It's supposed to be on settings / lock screen / customize lockscreen, right?

Intermittent Mobile Signal
*** Tampered ***
*** Unlocked ***
M7_ UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4M.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Apr 22 2014,01:10:58.1743
I am running a unlocked ATT M7_UL on T-mobile's network with CM11S which is just a beautiful and stable rom, I followed the intructions on installing CM11S, I wiped date/calvik cache, etc and flashed it using TWRP and everything works perfect on it except sometimes I lose signal and I am unable to change the network manually. When I check the APN sometimes the list of APN's is visible and sometimes there are none listed. But, when I try to manually set it and save it, it wont save. Wifi works grea, but no mobile data or ability to make or receive calls or text. I have tried wiping data and reflashing ROM and again it only works temporarily and then I lose signal again. Sometimes it does not read my sim card. I have tried the sim card on other phones and it works great. So i know its not the sim card. I did not install a custom Kernel, I am just using what came with ROM. Any one else experiencing this problem? Any suggestions?
TWRP v2.8.5.0
CM11S v8.5

best ROM
I've installed it and I really enjoy it! Great work. Its better than CM12 based od Lollipop...

[Q&A] CM-12.0 (LP) UNOFFICIAL nightly builds

Q&A for CM-12.0 (LP) UNOFFICIAL nightly builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM-12.0 (LP) UNOFFICIAL nightly builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Is this a unified build for all carriers?

network issues with xt1093 uscc
great rom! everything seems to work smoothly. the only issue i have had is trying to connect to my network. Do i need to configure the APN to my carrier or is there something i am missing? i installed correctly using TWRP, factory reset, flash zip, cleared dalvik, reboot,....

I'm assuming we'll lose the moto things like active display and the phone talking when at home and on the road?

network issues with xt1093 uscc
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.

NOOBSABOT said:
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.
Click to expand...
Click to collapse
I think that the radio is broken on the last couple of nightlies across many different devices. Try an older version and see if you have better luck.

i'm on stock 5.0 rooted xt1092
doing nandroid and flashing last build this evening.

flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?

michyall said:
flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?
Click to expand...
Click to collapse
Did you enable it in developers options?

matt99017d said:
Did you enable it in developers options?
Click to expand...
Click to collapse
Yes sir. I've solved fastbooting again CF. Maybe after format you loose root permissions.

No Network
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.

CrepuscularSoul said:
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.
Click to expand...
Click to collapse
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).

crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
---------- Post added at 01:31 PM ---------- Previous post was at 12:38 PM ----------
CrepuscularSoul said:
I'm pretty sure that's what I'm on. System is 22.21.11.victara_tmo.en.US, build LXE2246-11, and Baseband MSM8974_4125.184.08.27.01R
If that's not the latest let me know and I'll grab the updated ones and flash those through fastboot and try again. If they are is there anything I could grab with the syslog app or adb that might help in figuring it out?
Click to expand...
Click to collapse
Got it. The APN protocol for fast tmobile com in my stock rom was IPV6, and when I flashed this it was IPV4. Changing that got my data connection working.

crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
I have the T-Mobile pure and left the base as 4.4.4 and flashed cm12. Signal is awesome as are the transfer rates.
I've tried liquid and slim with the same results.

How will the battery? Better or worse than stock?
Works in XT1097, right?

I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?

loic5032 said:
I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?
Click to expand...
Click to collapse
you have to go into TWRP, then WIPE then Format Data. then install rom and gapps.
you will format your memory loosing everything on your phone. i used to plug an usb otg with rom and gapps files.

double tap
Can we get some double tap to wake love? That was basically my favorite thing about my oneplus one and i put cm12 on that and works great
Let me know if thats going to happen or not because i cant live without that or the moto display

I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed

michyall said:
I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed
Click to expand...
Click to collapse
Well i mean just having the option would be nice
its personal preference and my case makes it very difficult to press the power button

Help with Pure Nexus Project would be greatly appreciated

I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R

Make a backup in TWRP, wipe your system partition, Flash the ROM zip and the GAPPS zip, reboot, profit. If anything fails you can roll back to your backup and try again.

Real simple. Download the latest built as well as the latest google apps (gapps)
Reboot to TWRP
Do a backup, so you have a restore point if something happens
Go to wipe->advanced wipe and choose both caches, system and data. DO NOT wipe internal storage
Go to install, choose the ROM and gapps and install them
Reboot
You will now be on the latest. You will have to set your phone up again, and all your text messages, home screen, act will be gone but all your stuff on your sdcard (internal storage) will be untouched.
You can also get real ambitious and make backups with something like titanium backup of all your apps and data and restore it after booting PN, but try to not back up system apps or system data (it should be an option... I dont know, I never use tibu). The main thing you lose without backing up is texts, I usually just deal with it/redownload apps/set up home screen again.
On future updates, unless there are major changes and its indicated by a majority of people in the PN thread, just dirty flash.
That is, backup, wipe caches, install new ROM version( I wouldn't reflash gapps ) this will leave all your apps, settings, ect... But should only be done when flashing the same or a very similar ROM. If you dirty flash and experience problems, go back and clean flash as I first instructed.

So I should not worry about flashing the new 32r radio?

shouldnt this have been one of the first things to learn BEFORE you ever rooted your phone? yea, nice job jumping in before learning your way around. i bet you even used a toolkit to root your device..

Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.

roy.garlington said:
Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.
Click to expand...
Click to collapse
no tool kit? ok, your -1 on not learning before rooting has a +1 right by it, for rooting the proper way. you just might earn some respect

Hey there simbo, what do you say about flashing the radio?

Sure. Or don't.
Whatever.
The radio is pretty separate from android. Its basically drivers to tell you phone how to use hardware.
FI has certain requirements for activation that may check what radio you have, but outside of that run what ever works good for you., its not going to for sure be any specific one. Newer may often be better but its not uncommon that an older one may work a little better.
Different apps can help you monitor (I dunno which ones... But I know its a thing ), you can also go into about phone -> status -> sim status and check signal strength where lower dBm is better(well a lower numeric value... Its technically a negative number, so higher is better i.e. -113 is worse then -104). This will vary slightly minute to minute and place to place so just taking a glance once won't really settle it for you
I just use it for a day or two, pay attention to how my signal is (just kinda how often did I have decent # of bars, nothing scientific), and check battery stats clicking on cell standby and looking at % of time with out signal.

roy.garlington said:
Hey there simbo, what do you say about flashing the radio?
Click to expand...
Click to collapse
youre choice. you can try any of the radios, from previous android versions, on any android version. they arent specific. im using the 27R radio. whichever one works best for you, thats whats important

roy.garlington said:
I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R
Click to expand...
Click to collapse
Well, it's all very easy if you read a little. Still i will give you one extra tip in case you start flashing all kinds of roms: You unlocked your bootloader. Before doing that you enabled "OEM unlocking" in 'Developer options'. Leave that enabled (this setting is 'sticky'. even when you wipe the device)!!!!. Leaving OEM unlocking enabled will disable "Device Protection" that causes sometimes a 72 hours lock-out from your Google account.

[ROM][STOCK[MM 6.0]XT1096 verizon flashable stock rom

Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
None as of now.
Downloads:
Current version
Custom rom with new build.prop by yahya1054:
Download

AGISCI said:
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
Some people are experiencing an issue where it says they are roaming.
Downloads:
Main download
Mirror 1
Click to expand...
Click to collapse
What the difference between this rom and 1095 MM Rom

kaktusmaier125 said:
What the difference between this rom and 1095 MM Rom
Click to expand...
Click to collapse
This one has support for verizon cdma. It is only useful for people who use verizon service.
Sent from my XT1095 using Tapatalk

AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade

donslade said:
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
Click to expand...
Click to collapse
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk

Thanks for the update. I had notice that it did say retla in the system version. Need to pay attention to the baseband info.. Based on that I don't need to upload the About Phone screens then.

Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk

RamAir02 said:
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
It's a stock rom, gapps are in it already.
Sent from my XT1095 using Tapatalk

AGISCI said:
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
has this new version been uploaded yet?

Legacystar said:
has this new version been uploaded yet?
Click to expand...
Click to collapse
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk

AGISCI said:
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
awesome, thank you. any idea what he did to fix the roaming issue?

Legacystar said:
awesome, thank you. any idea what he did to fix the roaming issue?
Click to expand...
Click to collapse
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk

AGISCI said:
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
might have been the verizon apn app

Alright, sorry for the long delay. My internet is messed up right now. I started the upload last night and left it running. I woke up to a failed upload message. I started it again and it took 5 hours to upload... anyway, I have updated the first post with the link to the new version. Please try it out and let us know if you have issues with roaming still.

I have had the roaming issue since I installed the original MM posted a few days ago but even though the R is showing by 4g it still allows me to access data through 4g. Hope I am not going to incur the financial wrath of big red. lol. I was reading this forum using it. Anyway, I want to say thanks for those putting in the work to try and figure this out and support a stock MM rom for the xt1096. I will test the new version as soon as I get it downloaded and report back if the roaming issue persists for me.

I have updated to the latest version of stock MM offered on first post and can confirm that the R roaming symbol is gone. I have rebooted several times and finished setting my phone up how I want it. The only issue I had during the process of installing and setting up this version of MM is that upon rebooting the first 2 times I had a pop up saying "Unfortunately, Verizon Login has stopped."
I rebooted into twrp and installed reinstalled the root and su zips and upon reboot the pop up went away. I guess I was wrong to assume that the order for installing the zips were 1)root boot for 1095, 2)Super SU and 3) MM Rom. After reading that in order it makes more sense to load the Rom then the root and su zips. Oh well, all is well that ends well.

Has anyone figured out how to bypass the wifi setup screen during setup?

Wrong forum.

i just loaded the new version and still getting the roaming. also having the verizon app crash on startup.

To skip WiFi setup, put sim card in on welcome screen so after boot put sim,
also roaming is gone for me but I just get data, no voice on some reboots voice aval even when it says out of service same last build.
Roaming was an issue older build new build fixed, voice still wonky for me

DualBootPatcher

I was looking into multi-boot on my xt1060. Not important, just a project. Looking around, I saw a pretty cool project here on XDA called DualBootPatcher and started digging around into whether or not it would work for our device. Maybe not even the xt1060, but any variant of the device. Turns out, as of January 8th 2016, our device (all) is supported by DualBootPatcher: https://github.com/hankching/DualBootPatcher-1/wiki/[Devices]-Motorola and https://forum.xda-developers.com/android/development/list-support-devices-dualbootpatcher-t3278937
Anyone used it? I have an unlocked bootloader and I'm running 5.1, however my device has never been OTA'd past 4.4.2. I think it'd be pretty nifty to dual boot into a non-stock ROM for testing or just to give it a try before you fully commit. I'm also kind of impatient and make weekly backups, so I plan on giving it a shot tonight and will report back how it goes.

Tried
I did try this app on Kitkat 4.4.4. I installed Xperience 7.1 and Gapps Nano, I installed it on data partition, but the phone won't turn on, it only vibrates 5 times.
What I did to restore is installing the utilities.zip from TWRP and changing back to my primary rom.

Sidd24 said:
I did try this app on Kitkat 4.4.4. I installed Xperience 7.1 and Gapps Nano, I installed it on data partition, but the phone won't turn on, it only vibrates 5 times.
What I did to restore is installing the utilities.zip from TWRP and changing back to my primary rom.
Click to expand...
Click to collapse
Same result. Damn. I might keep digging into it if I can find the time.