Database Develop

[Q&A] [ROM] [4.4.4] [VS980] ParanoidAndroid [10/10]

Q&A for [ROM] [4.4.4] [VS980] ParanoidAndroid [10/10]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

To whom it may concern;
I'm new to the world of programming but have been in the android game since the original g1 with T-Mobile. I've been flashing custom roms and recoveries since then and I have also been doing some very basic coding. C++ and C# primarily. If you would like a beta tester to prevent more tedious and time consuming problems from arising prior to your updates I'm willing to test for you and if you'd think I could be of any programming assistance or would like to show me around the programming world I'd love to take you up on that. Pm me for my personal email if you'd like and I'll get back to you ASAP.
Sincerely,
Mike J.​

New to G2...flashed beta-3 and lost VZW LTE/3G data
I recently upgraded from VZW gnex to the LG G2 (bought off swappa). It was rooted already but running stock, and I'm used to AOSP, so I decided to go with Paranoid Android Beta-3. Long story short, I was having issues with LTE so I flashed the latest build (beta 5) and it got stuck in a boot loop. I was able to get back into recovery (TWRP 2.8.0.1) and restore nandroid backup, but when I booted I could no longer get verizon LTE or 3G data. Wifi connected fine, and calls/SMS go fine...just no mobile data. It does connect to "eHRPD" though, which doesn't have any data access.
Things I've tried:
1. Flashing a new bootstack. Tried 12A, 12B, 24A, 25A, 25B, 26A. No data with any of them
2. Flashing a new ROM (Tried Spirit ROM, which flashed fine but no data, and CM11, which went into a bootloop)
3. Calling *228 for a reset
4. Wiping the whole ROM and reflashing the same ROM and Gapps
5. Also tried setting APN as shown on a few websites. But as soon as I hit "Save" the modified APNs disappeared off the list.
Does anyone have any experience with losing LTE/3G like this? Luckily I have my old phone still so I just pop my SIM card back into it and it connects to data fine.

Updates
I am currently running the 10/25 build. When it comes to updates, do I want to flash over my current with the newer? Or is there a different process?

rpc:s-7:aec-0 after flash last night.
I'm getting the [rpc:s-7:aec-0] info from server error on my vs980 since i flashed last night. I flashed 26A, then PA, and then PA micro gapps.
this morning I did a full wipe and clean reinstall of PA, and I tried using the pico Gapps instead of the micro build. same result.
tried clearing google related app data, no fix. any ideas?

to the user with the apn problem, I had to set the apn 3 times before it saved
Love the ROM, great work. Was wondering how I would get Tmobile wifi calling option on this? I'm using the verizon vs980 version. Thanks

What about JDI pannel? PA kernel support JDI panel type?

ZBBfan3092 said:
I recently upgraded from VZW gnex to the LG G2 (bought off swappa). It was rooted already but running stock, and I'm used to AOSP, so I decided to go with Paranoid Android Beta-3. Long story short, I was having issues with LTE so I flashed the latest build (beta 5) and it got stuck in a boot loop. I was able to get back into recovery (TWRP 2.8.0.1) and restore nandroid backup, but when I booted I could no longer get verizon LTE or 3G data. Wifi connected fine, and calls/SMS go fine...just no mobile data. It does connect to "eHRPD" though, which doesn't have any data access.
Things I've tried:
1. Flashing a new bootstack. Tried 12A, 12B, 24A, 25A, 25B, 26A. No data with any of them
2. Flashing a new ROM (Tried Spirit ROM, which flashed fine but no data, and CM11, which went into a bootloop)
3. Calling *228 for a reset
4. Wiping the whole ROM and reflashing the same ROM and Gapps
5. Also tried setting APN as shown on a few websites. But as soon as I hit "Save" the modified APNs disappeared off the list.
Does anyone have any experience with losing LTE/3G like this? Luckily I have my old phone still so I just pop my SIM card back into it and it connects to data fine.
Click to expand...
Click to collapse
I'm having the EXACT same problem.

fndfd
广东省给多少个大概代购复古风格

any idea why my vs980 loses signal when i connect it to wifi, or reboot? running paranoid android custom rom, and even when i'm on stock, this happens???
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
Sent from my LG-VS980 using XDA Free mobile app

[Q&A] [ROM][I9295][4.4.2] Super WizCyan - S5 Style [debloated & deodexed + Addon Pac

[Q&A] [ROM][I9295][4.4.2] Super WizCyan - S5 Style [debloated & deodexed + Addon Pac
Q&A for [ROM][I9295][4.4.2] Super WizCyan - S5 Style [debloated & deodexed + Addon Package]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I9295][4.4.2] Super WizCyan - S5 Style [debloated & deodexed + Addon Package]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Hi everyone,
This ROM is great. every things are working well.
But I don't know how to change the "Right hard key's function. I don't want it show the "recent apps" when we press.
It should be a menu key when we using App.
Please support!
Thanks,

lamhcmute said:
Hi everyone,
This ROM is great. every things are working well.
But I don't know how to change the "Right hard key's function. I don't want it show the "recent apps" when we press.
It should be a menu key when we using App.
Please support!
Thanks,
Click to expand...
Click to collapse
In post# 1 under the downloads section, below version 03 you will find revert longpress to recents & menu. You can download and flash this zip through recovery and menu key will be as before.

no root after flashign WizCyan
After flashing WizCyan 4 with update 1 I don't have root access. I've tried reinstalling several times and I've also tried to install superSU on it's own using CWM, both the latest version and older versions, with no success. I've also tried to install just v4 but the problem persists. Does anybody have any clue on what could be wrong? I've had root on the phone using other ROMs. I use the latest CWM.
And yes, I chose no when promted to fix superuser in CWM. Although I have also tried to pres yes during one installation.

What version of cwm are you having? Also when you click on the supersu app what message do you get?

I used version 6.0.3.5. Today I installed 6.0.5 and redid the flashing of the update and also of superSU 2.16 by it self from CWM. No difference
When i press the superSU app I dont get any message really. Looking at the log it's as if though the app denies all apps access without asking. I tried changing the settings in superSU to allow all requests and then the phone passed the check with root checker and root apps also seem to work. No app is added to the SuperSu applist.

Gudiol said:
I used version 6.0.3.5. Today I installed 6.0.5 and redid the flashing of the update and also of superSU 2.16 by it self from CWM. No difference
When i press the superSU app I dont get any message really. Looking at the log it's as if though the app denies all apps access without asking. I tried changing the settings in superSU to allow all requests and then the phone passed the check with root checker and root apps also seem to work. No app is added to the SuperSu applist.
Click to expand...
Click to collapse
I would suggest that you do a clean install of the ROM, now that your recovery has been updated

Excessive consumption of battery
Sorry, but this was translated by google.
I found a big problem in version 4 and is the battery, prior to this version, the battery works well, the battery lasted the whole day, but now the battery hopefully enduring three hours.
Please, give solution to this problem or any suggestions, as I really like this ROM and do not want to change the other.
Thanks in advance.

srDosaps said:
Sorry, but this was translated by google.
I found a big problem in version 4 and is the battery, prior to this version, the battery works well, the battery lasted the whole day, but now the battery hopefully enduring three hours.
Please, give solution to this problem or any suggestions, as I really like this ROM and do not want to change the other.
Thanks in advance.
Click to expand...
Click to collapse
Will suggest to do a clean install and check and if not then report back. Anyone else facing this issue.. kindly report

srDosaps said:
Sorry, but this was translated by google.
I found a big problem in version 4 and is the battery, prior to this version, the battery works well, the battery lasted the whole day, but now the battery hopefully enduring three hours.
Please, give solution to this problem or any suggestions, as I really like this ROM and do not want to change the other.
Thanks in advance.
Click to expand...
Click to collapse
Ok, did some testing and found that some of the init.d scripts were eating battery therefore have posted an update in the OP removing these and battery consumption should be better after flashing this update.

can i install
i have 4.4.2 NE5 but DBT not PHN,can i install this rom on my firmware and do i need install first version 4 and then flash version 4 update 02?and how much memory i have after flashing this rom is ih still around 12 gb or less?

s4active user said:
i have 4.4.2 NE5 but DBT not PHN,can i install this rom on my firmware and do i need install first version 4 and then flash version 4 update 02?and how much memory i have after flashing this rom is ih still around 12 gb or less?
Click to expand...
Click to collapse
Sure, you can install on any firmware, but if you have wifi issues then you may need to flash modem or some other workaround. Just wipe data/factory reset and install version 04 followed by update 02. I am not sure on what you mean by memory but presume that you are referring to internal sd card. This will depend on what apps/features you install from the addon package and playstore. The ROM will not affect your internal sdcard space as it will be installed on the reserved system space.

Problem with Rom Super Wizcyan - S5 Style
Hello, first sorry by my english, its sucks, but ill try to explain my problem, i install the rom wizcyan - s5 style in my I9295 (of course), and follow all the instruction, like de developer says, starts normaly, but for example, when i push the screen mirroring button, the phone freeze an restart, and occasionally shows a message like "android core process stoped". do all the wipes, and install the 6.0.5 rom manager, all the proces finish ok, install the update, and occurs the same problem, i like this rom its cool , faster and light, without all the samsung crap, someone can help me please, thanks in advance.

Kaitenx said:
Hello, first sorry by my english, its sucks, but ill try to explain my problem, i install the rom wizcyan - s5 style in my I9295 (of course), and follow all the instruction, like de developer says, starts normaly, but for example, when i push the screen mirroring button, the phone freeze an restart, and occasionally shows a message like "android core process stoped". do all the wipes, and install the 6.0.5 rom manager, all the proces finish ok, install the update, and occurs the same problem, i like this rom its cool , faster and light, without all the samsung crap, someone can help me please, thanks in advance.
Click to expand...
Click to collapse
In case you want to use screen mirroring then you would need to install allshare from the addon package

I've been tinkering with trying to get WizCyan totally working on my device for a couple of days, but I can't for the life of me get Wifi working (at first it was root access, but that was fixed by upgrading CWM). Here is the exact process I've followed:
Updated CWM to 6.0.5 (PhilZ's version)
Did a factory reset from recovery (I didn't use the "Clean to install new ROM" function)
Installed WizCyan version 4, followed by update 2
Rebooted, attempted to configure WiFi -- failed.
Flashed the NE5 modem package from the links in the dev thread, using Odin 3.07 -- twice each, as instructed
Still can't get my Wifi to enable. The flash was successful, as I can see the correct baseband on the "about" screen, but it refuses to enable. I'm in Australia, but I believe this phone came from UAE -- would that make a difference to the way the modem interacts with the Wifi hardware? I pulled this info from logcat:
Code:
I/WifiManager( 1084): setWifiEnabled : true
I/WifiService( 882): setWifiEnabled: true pid=1084, uid=10008
E/WifiHW ( 882): ##################### set firmware type 0 #####################
E/WifiHW ( 882): Cannot open "/data/.cid.info": No such file or directory
E/WifiHW ( 882): ==========[WIFI] Station firmware load ===========
E/WifiHW ( 882): return of insmod : ret = -1, Exec format error
E/WifiStateMachine( 882): Failed to load driver
E/WifiStateMachine( 882): sendErrorBroadcast code:10
E/WifiController( 882): Wi-Fi driver is unstable. Received CMD_STATEMACHINE_RESET
In the mean time, I'm going to try to source either a local radio, or one from the original region, to see if that helps.

andycore said:
I've been tinkering with trying to get WizCyan totally working on my device for a couple of days, but I can't for the life of me get Wifi working (at first it was root access, but that was fixed by upgrading CWM). Here is the exact process I've followed:
Updated CWM to 6.0.5 (PhilZ's version)
Did a factory reset from recovery (I didn't use the "Clean to install new ROM" function)
Installed WizCyan version 4, followed by update 2
Rebooted, attempted to configure WiFi -- failed.
Flashed the NE5 modem package from the links in the dev thread, using Odin 3.07 -- twice each, as instructed
Click to expand...
Click to collapse
Can't get anything much from the logcat, it refers to a file that gets created on 1st boot you can try doing a factory reset from settings--> backup & restore--> factory data reset. Only backup your internal sd card before doing this as it will wipe your entire phone including internal sdcard and then reflash the modem.

JASONRR said:
Can't get anything much from the logcat, it refers to a file that gets created on 1st boot you can try doing a factory reset from settings--> backup & restore--> factory data reset. Only backup your internal sd card before doing this as it will wipe your entire phone including internal sdcard and then reflash the modem.
Click to expand...
Click to collapse
Well if I'm going to go that far, I may as well do it properly and completely restore the phone to stock and start again. When I bought it, the first thing I did was root, flash CWM and a CM based ROM -- it's probably worth starting fresh anyway, I'm only going to be using it for a couple more weeks until it's replacement arrives.
I'm currently downloading the latest firmware for my region (XSA), a 4.2.2 based MK3 build from the end of last year -- do you think I'd have better chances if I restored to a 4.4.2 build (like NE5), or should it not matter if I completely reset the phone to factory settings/software?

andycore said:
Well if I'm going to go that far, I may as well do it properly and completely restore the phone to stock and start again. When I bought it, the first thing I did was root, flash CWM and a CM based ROM -- it's probably worth starting fresh anyway, I'm only going to be using it for a couple more weeks until it's replacement arrives.
I'm currently downloading the latest firmware for my region (XSA), a 4.2.2 based MK3 build from the end of last year -- do you think I'd have better chances if I restored to a 4.4.2 build (like NE5), or should it not matter if I completely reset the phone to factory settings/software?
Click to expand...
Click to collapse
Generally doing a factory reset from the phone resets the entire firmware and is helpfull to resolve such issues. if you want to install the entire firmware, I would recommend flashing the 4.4.2 PHN firmware you can get the download link in post# 13. But then there were wifi issues after flashing the PHN firmware for which a factory reset from the phone happened to be the solution.

JASONRR said:
Generally doing a factory reset from the phone resets the entire firmware and is helpfull to resolve such issues. if you want to install the entire firmware, I would recommend flashing the 4.4.2 PHN firmware you can get the download link in post# 13. But then there were wifi issues after flashing the PHN firmware for which a factory reset from the phone happened to be the solution.
Click to expand...
Click to collapse
Thanks for that mention of the firmware, I had the radio from that link but forgot you'd also linked the full package. Google Drive is much faster than the websites I'd been trying to get files from, it took 15 hours to download the XSA firmware I was originally going to use.
You were totally correct, resetting the phone was the solution. I got the PHN firmware, flashed it via ODIN only to find it still hadn't fixed the WiFi problem -- even after a factory reset -- however the process of flash/reset/re-flash fixed it for me -- it seems unnecessary to me, but I guess times have changed since I last tinkered with unlocked devices. I'm happy to say that I now have WiFi working under WizCyan now, just wanted to check back in just in case anybody else was facing similar issues. As painful as it is to have to back up and totally restore, sometimes starting completely fresh is the best solution.
Now I'm off to rebuild my SD Card, lol.

andycore said:
Thanks for that mention of the firmware, I had the radio from that link but forgot you'd also linked the full package. Google Drive is much faster than the websites I'd been trying to get files from, it took 15 hours to download the XSA firmware I was originally going to use.
You were totally correct, resetting the phone was the solution. I got the PHN firmware, flashed it via ODIN only to find it still hadn't fixed the WiFi problem -- even after a factory reset -- however the process of flash/reset/re-flash fixed it for me -- it seems unnecessary to me, but I guess times have changed since I last tinkered with unlocked devices. I'm happy to say that I now have WiFi working under WizCyan now, just wanted to check back in just in case anybody else was facing similar issues. As painful as it is to have to back up and totally restore, sometimes starting completely fresh is the best solution.
Now I'm off to rebuild my SD Card, lol.
Click to expand...
Click to collapse
Glad to know that you managed to get the wifi working.
Personally, I did not face the wifi issue after flashing PHN firmware, but know that quite a few have faced this issue as reported in this thread
Normally my understanding and experience is that when you flash different modems / firmware some corruption occurs and factory reset from within the phone resets the partition & firmware. 1st time I experienced this was when I was using a MTK 6575 based device and had amended the EBR, MBR and scatter files to modify the partition sizes, even though these were flashed through mobiuncle tools (similar to odin), the revised partitions did not get changed until I did a factory reset from within the phone. I know that this is irrelevant here but thought that I would share this.

Help with Pure Nexus Project would be greatly appreciated

I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R

Make a backup in TWRP, wipe your system partition, Flash the ROM zip and the GAPPS zip, reboot, profit. If anything fails you can roll back to your backup and try again.

Real simple. Download the latest built as well as the latest google apps (gapps)
Reboot to TWRP
Do a backup, so you have a restore point if something happens
Go to wipe->advanced wipe and choose both caches, system and data. DO NOT wipe internal storage
Go to install, choose the ROM and gapps and install them
Reboot
You will now be on the latest. You will have to set your phone up again, and all your text messages, home screen, act will be gone but all your stuff on your sdcard (internal storage) will be untouched.
You can also get real ambitious and make backups with something like titanium backup of all your apps and data and restore it after booting PN, but try to not back up system apps or system data (it should be an option... I dont know, I never use tibu). The main thing you lose without backing up is texts, I usually just deal with it/redownload apps/set up home screen again.
On future updates, unless there are major changes and its indicated by a majority of people in the PN thread, just dirty flash.
That is, backup, wipe caches, install new ROM version( I wouldn't reflash gapps ) this will leave all your apps, settings, ect... But should only be done when flashing the same or a very similar ROM. If you dirty flash and experience problems, go back and clean flash as I first instructed.

So I should not worry about flashing the new 32r radio?

shouldnt this have been one of the first things to learn BEFORE you ever rooted your phone? yea, nice job jumping in before learning your way around. i bet you even used a toolkit to root your device..

Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.

roy.garlington said:
Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.
Click to expand...
Click to collapse
no tool kit? ok, your -1 on not learning before rooting has a +1 right by it, for rooting the proper way. you just might earn some respect

Hey there simbo, what do you say about flashing the radio?

Sure. Or don't.
Whatever.
The radio is pretty separate from android. Its basically drivers to tell you phone how to use hardware.
FI has certain requirements for activation that may check what radio you have, but outside of that run what ever works good for you., its not going to for sure be any specific one. Newer may often be better but its not uncommon that an older one may work a little better.
Different apps can help you monitor (I dunno which ones... But I know its a thing ), you can also go into about phone -> status -> sim status and check signal strength where lower dBm is better(well a lower numeric value... Its technically a negative number, so higher is better i.e. -113 is worse then -104). This will vary slightly minute to minute and place to place so just taking a glance once won't really settle it for you
I just use it for a day or two, pay attention to how my signal is (just kinda how often did I have decent # of bars, nothing scientific), and check battery stats clicking on cell standby and looking at % of time with out signal.

roy.garlington said:
Hey there simbo, what do you say about flashing the radio?
Click to expand...
Click to collapse
youre choice. you can try any of the radios, from previous android versions, on any android version. they arent specific. im using the 27R radio. whichever one works best for you, thats whats important

roy.garlington said:
I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R
Click to expand...
Click to collapse
Well, it's all very easy if you read a little. Still i will give you one extra tip in case you start flashing all kinds of roms: You unlocked your bootloader. Before doing that you enabled "OEM unlocking" in 'Developer options'. Leave that enabled (this setting is 'sticky'. even when you wipe the device)!!!!. Leaving OEM unlocking enabled will disable "Device Protection" that causes sometimes a 72 hours lock-out from your Google account.

[ROM][STOCK[MM 6.0]XT1096 verizon flashable stock rom

Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
None as of now.
Downloads:
Current version
Custom rom with new build.prop by yahya1054:
Download

AGISCI said:
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
Some people are experiencing an issue where it says they are roaming.
Downloads:
Main download
Mirror 1
Click to expand...
Click to collapse
What the difference between this rom and 1095 MM Rom

kaktusmaier125 said:
What the difference between this rom and 1095 MM Rom
Click to expand...
Click to collapse
This one has support for verizon cdma. It is only useful for people who use verizon service.
Sent from my XT1095 using Tapatalk

AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade

donslade said:
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
Click to expand...
Click to collapse
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk

Thanks for the update. I had notice that it did say retla in the system version. Need to pay attention to the baseband info.. Based on that I don't need to upload the About Phone screens then.

Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk

RamAir02 said:
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
It's a stock rom, gapps are in it already.
Sent from my XT1095 using Tapatalk

AGISCI said:
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
has this new version been uploaded yet?

Legacystar said:
has this new version been uploaded yet?
Click to expand...
Click to collapse
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk

AGISCI said:
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
awesome, thank you. any idea what he did to fix the roaming issue?

Legacystar said:
awesome, thank you. any idea what he did to fix the roaming issue?
Click to expand...
Click to collapse
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk

AGISCI said:
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
might have been the verizon apn app

Alright, sorry for the long delay. My internet is messed up right now. I started the upload last night and left it running. I woke up to a failed upload message. I started it again and it took 5 hours to upload... anyway, I have updated the first post with the link to the new version. Please try it out and let us know if you have issues with roaming still.

I have had the roaming issue since I installed the original MM posted a few days ago but even though the R is showing by 4g it still allows me to access data through 4g. Hope I am not going to incur the financial wrath of big red. lol. I was reading this forum using it. Anyway, I want to say thanks for those putting in the work to try and figure this out and support a stock MM rom for the xt1096. I will test the new version as soon as I get it downloaded and report back if the roaming issue persists for me.

I have updated to the latest version of stock MM offered on first post and can confirm that the R roaming symbol is gone. I have rebooted several times and finished setting my phone up how I want it. The only issue I had during the process of installing and setting up this version of MM is that upon rebooting the first 2 times I had a pop up saying "Unfortunately, Verizon Login has stopped."
I rebooted into twrp and installed reinstalled the root and su zips and upon reboot the pop up went away. I guess I was wrong to assume that the order for installing the zips were 1)root boot for 1095, 2)Super SU and 3) MM Rom. After reading that in order it makes more sense to load the Rom then the root and su zips. Oh well, all is well that ends well.

Has anyone figured out how to bypass the wifi setup screen during setup?

Wrong forum.

i just loaded the new version and still getting the roaming. also having the verizon app crash on startup.

To skip WiFi setup, put sim card in on welcome screen so after boot put sim,
also roaming is gone for me but I just get data, no voice on some reboots voice aval even when it says out of service same last build.
Roaming was an issue older build new build fixed, voice still wonky for me

Nexus 6 with Android 7 on T-Mobile

I feel like the answer is a really obvious No. I've tried to google around but honestly not seeing a definitive answer. Is there hope? Am i just a noob? Would I use a custom rom, are there any surefire custom solutions for a closet to factory edition?

Klownicle said:
I feel like the answer is a really obvious No. I've tried to google around but honestly not seeing a definitive answer. Is there hope? Am i just a noob? Would I use a custom rom, are there any surefire custom solutions for a closet to factory edition?
Click to expand...
Click to collapse
I don't know of any reason why you can't just download the NBD91P image from here and flash each partition manually from the bootloader using fastboot, or download the NBD91P OTA image from here and flash it following the instructions on that page. I haven't heard or read anything at all that the stock factory image won't work on a T-Mobile Nexus 6.
Edit: If you haven't manually flashed an image before I have always used the instructions under "Method 2 : (Long, but works always)" on this page.

I would just load the OTA. There isn't any issues with it on t-mobile. was running the stock ROM for awhile. Now testing out CM14.1

I'm on nitro 7.1.1 on tmo with zero issues. Been flashing DP and no issues either in the past.
Sent from my Nexus 6 using XDA-Developers mobile app

ozzmanj1 said:
I'm on nitro 7.1.1 on tmo with zero issues. Been flashing DP and no issues either in the past.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello I am also on nitro 7.1.1 on tmo. I cannot make or receive calls. I can but no sound and call automatically disconnects at 17 seconds. Also when pushing call button signal drops to hspsa. Then up again when it disconnects. Any idea on how to fix calls? Any info is greatly appreciated thank you.

Dopemusic89 said:
Hello I am also on nitro 7.1.1 on tmo. I cannot make or receive calls. I can but no sound and call automatically disconnects at 17 seconds. Also when pushing call button signal drops to hspsa. Then up again when it disconnects. Any idea on how to fix calls? Any info is greatly appreciated thank you.
Click to expand...
Click to collapse
I've never had any issues. My wife and nephew and older brother all have nexus 6 phones with nitro installed and have had zero issues on Tmo. Off hand have you checked your APN settings? Have you tried a fresh clean install? When I do a clean install I go and wipe, data, system, cache, etc, but leave internal storage alone. I know it gets wiped on install but I do it anyways to be sure. Other then checking APN settings and or fresh install I am stumped why anyone should be having issues. Sorry I can't give more insight. I guess the other issue could be your radio ....May want to look into flashing a different radio to see how it fares
Edit -. Link for flashable radios
http://forum.xda-developers.com/showthread.php?t=3066052
Hope any of these suggestions help
Sent from my Nexus 6 using XDA-Developers mobile app

So 7.0 just OTA'ed for me today 3/10/17. Given the recent issues with 7.1 I'm kind of OK with that.

Note10Dude - what 7.0.0 OTA or Factory Image do you find works well with T-Mobile? I think my radios are funky with 7.1.1 N6F26U - thanks in advance.
Note10.1Dude said:
So 7.0 just OTA'ed for me today 3/10/17. Given the recent issues with 7.1 I'm kind of OK with that.
Click to expand...
Click to collapse

What I wound up doing was go to the T-Mobile page and established the official latest factory image was 6.0.1 MMB29K - installed that using Wugfresh. After installing and logging into WiFi and my Gmail account was prompted to install 7.0.0 NBD92G - this installed fine and then after installing a couple of security updates was able to Re-Lock my Bootloader (I wanted Android Pay to accept my credit cards). Data reception is still degraded significantly, am now thinking there is a problem with the tower.

voyageurs60 said:
Note10Dude - what 7.0.0 OTA or Factory Image do you find works well with T-Mobile? I think my radios are funky with 7.1.1 N6F26U - thanks in advance.
Click to expand...
Click to collapse
I just posted this same response in a separate, but similar thread.
It's likely, in doing your updates, the modern (radio) software was updated as well. The modems are OS version independent and you may now have one that doesn't work as well for you as your original one did. You may not know which one you started with, but you could just try several to see if any improve the situation for you. Here are flashable zips of many of the modems.
You might also double check your APN settings against TMO website. I use Sprint, so no APNS, thus I can't really give you a step thru. If you search though, it's not an uncommon discussion.

I have build number NBD92G. No issues for me; I took it as an OTA. It has baseband MDM9625_104670.31.05.42R. T-mo did not push a May security update that I am aware of; I hope that indicates they are trying to validate a 7.1.1.

So, T-mobile is still on 92G for the last 3 months without security update. With the rumors of 7.1 being pushed again, anybody seeing anything? We will be EOL in October for security updates, and I plan to side-load the final one if T-mobile doesn't push it, but I do think they should be doing their job and letting our phones take the latest updates.