I have searched for solutions for the past 2 days but cant find one, if i missed it or this post is redundant , i apologize in advance.
Now my tilt is driving me crazy. It started last week when The touch screen wasnt working, but i fixed it by doing a couple of soft resets. then all the sudden, everytime i slide my keyboard out, the touch screen would stop responding. this went on for a day, then yesterday, when i tired to use the keyboard, the screen went blank, like the light died or something. but when i put it back on portrait, the screen would light up again.
A few moments later, the touch was responding, tried to use the keypad then the screen went blank..tried soft resets about 5 times and uninstalled all recent added programs (skyfire) ..finally the screen was working but the touch still wasnt working.
So this morning, i had the bright idea to do a hard reset....dumbest idea ever cos now its stuck at the screen where i have to "tap the screen to set up your wm device" and guess what..the touch screen isnt responding
plz i really need help with this. all so , i have a broken tilt.., well lcd screen is cracked...can i try to dismantle both tilts and replace the screens?
Ok, i used Code Factory's Remote screen alignment to bypass the alignment, but if i cant use the touch screen or the keyboard, the phone is pretty much useless for sending any information or making calls..is there a way to fix this?
I have had this same issue with my tilt. I could use the scroller on the left side of the unit to navigate but no touch screen. Both times that this has happened to me I removed the screen protector that I had on and restored a backup that I had on my storage card (I run a backup weekly). This has always fixed my issue. You could try another hard reset, not sure if that will help but do you get any lights on the keyboard when you slide it open? Is your tilt less than a year old because there is a manufacturer's warranty too.
Jim
when i slide the keyboard, i do get lights on the keyboard but not on the screen...it just goes dead..but when i slide it back in, the screen comes to life.
I cant do another hard reset cos i have to input the "1,2,3,4" code.
Also , the phone just got out of the 1yr warranty this month...awesome
I want to buy a replacement screen with a new digitizer but i need to be sure that is the problem.. ive searched for this keyboard problem but still have no answers
Now I'm having the same issue, touch not responding. I first noticed it about two days ago, when I slide the keyboard out, I could type just fine, but when I went to send the message the touch screen wouldnt work, so I'd close the keyboard and it would work. well yesterday it stopped working all together, so i used my d-pad and did a sprite restore and it started working again. But then On my way home i hit the lock button, and it stopped working after that, and I couldn't get it unlocked. I used the inner soft key to hit the first part of unlock, but then I couldnt ever figure which button to hit to get the on screen part of the unlock. So I had no choice but to do a hard reset, and just like highoct now I'm stuck on the stylus setup , and the touch still doesnt respond. does anybody esle have any suggestions ? Thanks in advance.
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Oh yeah, I did manage to do a hard reset again, but now the screen is just white. I can hear the sound of it booting up but it still has a white screen. I tired going to the Bootloader screen ( Camera and power at the same time)...still have the white screen. I believe its a hardware problem but i don't know what it is...any ideas?
Ok now I've done a hard flash, using the same HTC kaiser rom 6.1 and it fixes the problem for a little bit, until the first time I slide out the keyboard , then the screen stops working again, any suggestions ?
iPhone 3G Screen Repair...finally an affordable answer
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Chill0987 said:
If you are reading this, you are most likely in the same dilemma I was in. I dropped my phone and picked it up only to find out that the glass screen was cracked. I took my broken phone to apple and found out it would cost me $199. I then was told about iPhone 3G Screen Repair. They offered the iPhone 3G glass screen repair for only 69.99. They repaired my phone the same day they received it. I was very happy with the repair!
Click to expand...
Click to collapse
Does this look like an apple website? did i say i had an iphone? GET OUT OF HERE!!!
Ninety Four said:
Sounds like a plug for your website to me... Last I checked this wasn't an iPhone site.
Click to expand...
Click to collapse
And thats his only post, its spam. jerk him outta here
Tilt Touch Screen
highoct said:
You can use the Code Factory's Remote screen alignment to bypass the alignment.
If the touch screen is the only problem, you can do one of two things if you are no longer under warranty;
1. Fix it yourself. You will have to buy a new Lcd screen with new digitizer at ebay and use this site http://www.pdacenter.ru/razborka/razbor_htc_kaiser/ to open up your tilt and replace it
2. Send it to a repair shop, I had two tilts and sent the one with the broken screen to www.missionrepair.com got it back in a within a week, $89.00 plus shipping
here is the link : http://www.missionrepair.com/Mission_Repair_AT_T_Cell_Phone_Repairs_and_Upgrades_s/321.htm
I still have the same tilt with the original problem..havent found a solution yet
Click to expand...
Click to collapse
I know this thread is a bit old but was searching d forum for possible solutions cos yesterday i developed the same exact problem on my kaiser for no apparent reason!..flashing it hasnt helped and now im stuck on the wm setup screen..when u say u still have the same tilt with the original problem do you mean that the repair was unsuccessful? have you tried reparing it yourself? Thanks
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
grayfoxmg1 said:
I just started to have the same problem, it started out with the touch not responding (which a few soft resets fixed) and now the whole screen doesn't function unless i slid out the keyboard or if i jiggle it around and open it a couple of time i can usually find a spot that allows the screen to function with the keyboard closed. If i leave it in this position for about an hour the touch starts responding again, wtf. This is very inconvenient because as soon as you move the screen even just a little it will take me like half an hour to find the position which allows the phone to function.
Click to expand...
Click to collapse
same thing happened to me 3 days ago. touchscreen has just stopped responding.
it still worked when i slided my keyboard out, but only when it was out. then i realized it won't work at all (!) after soft reset. however, i could make it work again like that when i did the soft reset with the keyboard out. weird.
i tried searching, and decided to make a hard reset, flash a new rom, etc, etc., but no more touchscreen. at all. the device doesn't feel any touch in any case. nothing. i bypassed the beggining tap here with the storage card trick. (i've read it somewhere on the forum).
now i can only use my kaiser with the hw buttons, the keyboard, and that's it. no touch. really weird. please if anyone has any updates, solutions, anything, post. sniff sniff
mine doesn't have anything on the screen unless i slide it out, if i have it closed anymore, it just doesn't work at all.
try this:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
se1988 said:
ive just replaced my barely functioning lcd by myself, after living with it sometimes registered the stylus jumping around when i used the stylus. but before you change your lcd, here is a couple of tips for you guys:
1) try sliding out the keyboard. hold one finger in the middle of the keyboard and another on the back side of the phone, and squeeze hard, but careful. it might be that the flat cable between the screen part and the main part has loosened a bit from its socket, this could help it back in.
2) try sqeezing the hang up button hard. this might help the lcd-cable correctly back in its socket if it is loose.
im saying that this MIGHT help, if youre lucky. most likely you have to open the phone and squeeze the connectors back in yourself, or actually change the entire lcd. anyways, let me know what works for you!!
Click to expand...
Click to collapse
well, i tried both tips, but they didn't work. i'd like to say a big thanks anyway!
then i grabbed the kaiser service manual and took my device apart into pieces. i reconnected pretty much all the cables and stuff, but still no touchy. any further ideas?
you should try replacing the screen. im happy to say that this screen from this seller on eBay worked for me: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250539984183
look here for dissasembly video: http://www.fonlogix.tv/tiltlow.wmv
(to save it to desktop right click link and "save target as")
thanks for your help, i've just ordered a new screen! phew, i hope it's gonna work
Hello,
I am new to Nexus one coming from Iphone 3G. the phone is quite good but i experience a little problem.
When the phone is plugged in and is charging, the touch screen becomes very inaccurate. Typing on keyboard is impossible...etc, the only solution is to use the trackball. Everything is gone after unplugging it from the power cord.
Do you have any advice for solving this ?
Best Regards,
I've heard that if you press the power button to put the phone asleep and then press it again to wake the phone would reset the touchscreen
Sent from my Nexus One using XDA App
Is the phone getting hot while you are charging it?
I found that when it gets really hot that it can mess up the touchscreen a little.
Common problem, no fix for it. Just black out the screen, and the problem resets itself and goes away. Takes 1 second. It's a hardware issue.
i have same problem too....
sorry... wrong post
Thank you for your answer, i understand that plugged or hot can mess the touch screen. It's not "fixable", i will live with it.
I sent mine back 3 times and it is finally fixed. I have a perfect touch screen. Have not had san issue in over 2 weeks. Send back and leave note with your phone. As I said I would not except no for an answer.
Vinny
Sent from my Nexus One using XDA App
hmm just had this problem for the first time... searched "captivate touchscreen problem" and what do you know? found out its because im charging....!!
best bug fix for nexus on display problem after plunin to power
nolan76 said:
Hello,
I am new to Nexus one coming from Iphone 3G. the phone is quite good but i experience a little problem.
When the phone is plugged in and is charging, the touch screen becomes very inaccurate. Typing on keyboard is impossible...etc, the only solution is to use the trackball. Everything is gone after unplugging it from the power cord.
Do you have any advice for solving this ?
Best Regards,
Click to expand...
Click to collapse
after plugin to power
JUST....
turn off display(press power button)
clean display with hand..
and turn on again
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
123talis said:
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
Click to expand...
Click to collapse
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
killerbie said:
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
Click to expand...
Click to collapse
Problem is, that in my country, there is no official service center, thus it has to be sent to our neighbor, and because of that, it takes forever to work it out. I could live with that, if there is no self-help, but I was just wondering whether there is some app or setting or not.
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed
Why no one reply
Hello, I´m having the same problem.
Today I asked Amazon for a replacement.
i have the same issue here, when the phone is over a flat surface the touch doens't work...
Try this:
settings > Language & Input > Pointer speed >>> decrease pointer speed.
And check if it helps.
Anyone having touchscreen sensitivity issues? I'm having ghost swipes galore while trying to scroll up and down a page like Google now or Facebook. Try swiping left and right on the home screen. On mine it just started to not respond anymore after a couple of times. Even if I go to the multitasking page, I'll try and swept away each open app and it'll just start to not register. This is while not plugged in btw. I really love the phone otherwise and want to keep it but I'll have to return it if this is a common problem. Is this an issue with the phone or just me? If it is just mine then I'll just exchange it and hope I get a better one.
Actually it is much more prevalent while charging. I also forgot my Moto mod battery pack charges constantly and my cause grounding issues also. Let me know if it's just my phone y'all!
I had these issues initially, especially with the bottom of the screen and the back button, but after a couple reboots they're totally gone. Try a hard restart (hold the power button until it restarts). I use a turbopower mod so i don't think its that.
My charging cord doesn't work.I just bought 3 days ago and it will not turbo charge
Sent from my Moto Z3 Play using Tapatalk
Natejka7273 said:
I had these issues initially, especially with the bottom of the screen and the back button, but after a couple reboots they're totally gone. Try a hard restart (hold the power button until it restarts). I use a turbopower mod so i don't think its that.
Click to expand...
Click to collapse
after reboot initially it's better but then it returns after a few minutes. is it the same for you? does it return? anyone else having this problem because I'm trying to determine whether I should take this back or not and get it exchanged.
Problem was an isolated incident and I'm happy to announce that I exchanged the faulty phone for another and this one shares none of the problems said above. So in short, if you're having screen sensitivity problems, send/take your phone back for a new one.
It's flawless now! I freakin love this phone!