Database Develop

Screen Alignment Problem

Coming from a P3600 I did read about the TyTN´s screen alignment issues. Nevertheless, I figured that it can´t be the TyTNII will have similar problems.
Well, mine does.....
Pressing one spot on the screen occasionally activates another. Easily recognizable when drawing: I just put down the stylus and instead of a dot I get a line.....
I´ve tried the bussiness card trick but no good. Will wait for the Brando screen protector to arrive and see if it helps. (Right now I have the HTC shipped protector installed, which is a rather poor solution)
edit: new findings:
1. only the left 25-30% (portrait mode) of the screen is affected
2. By pressing fairly hard on the screen I can duplicate the problem in 80% of the attempts
3. Have adjusted the registry value for screen sensitivity to 250......light to normal presses register correctly 95% of the time.
Using the finger instead of the stylus I have 100% success rate
4. Don´t really want to send it in yet for fear of the repair guys just doing a hard reset, testing for 5 seconds and sending it back

Hehe, i got scared at first, i'm pretty sure that's connected to the finger scrolling and is not a hardware issue. You can try to disable TouchFlo (in registry, i don't remember where exactly) and see if it helps, i'm pretty sure it will fix it
About the finger issue: even if we don't get the HTC Touch hardware that detects finger (or so they say) our Kaiser kinda detects finger too, at least i feel like it does, so this strengthens my point about this being connected to TouchFlo

Problem with the touch screen.

I bought my HTC tytn II about a week ago and I am having a problem with the touch screen. Sometimes when I touch for example on the start or on the ok button with the stylus it doesn’t respond from the first time and I must touch again to respond. I have align the screen so that’s not the problem because most of the time it works ok. Can someone please help me with this? Thanks.

Sometimes the corners just need a firmer press where the digitizer layer is held more firmly. So you would need to check whether yours really needs two presses or just a firmer one.
Mike

The problem is not just the corners but the whole screen. Sometimes it just doesn’t respond from the first touch.

After further usage of the device I think it’s not the touch screen that has the problem because when it’s not responding it freezes for about 2-4 sec. and then it’s normal again. Is anyone experiencing this strange behavior? What can it be wrong it drives me crazy! Can please someone help?

My ATT Tilt is doing the same thing. Right now im running the stock ATT Rom with the ATT autoload crap disabled after a clean hard reset.
I notice that when my touch screen stops responding so do the soft keys and function buttons. The device appears to hang-up and **** the bed every once in a while. Its often enough to also drive me crazy as well.

[Q] Screen sensitivity

I am not sure whether it is my mind playing trick with me or not, but I feel like my phone is less sensitive after I did the hard reset (power+volume down). Sometimes I need to press 2-3 times because the first light tap was not detected.
So is there anyway to increase the sensitivity?

I have the same problem, but no idea that is the hardware or only software problem.....

Fresh owner of this Optimus 2X in France, in our community, frandroid.com, we encounter the same problem , I think this is a software issue.

Did someone already contact LG??

Maybe they should include this into the bug list thread.
May I know were you guys having this problem since it is out of the box? or after reset?

I have the same problem started from day 1 till now

I have the same issue and already thought I'd be the only one having this problem.
I would not say it's a problem with sensitivity, but it feels like the touchscreen goes into some kind of sleepmode where then you need to press a second time, to wake it up.
Continuous touching is no problem. (like when typing rapidly on the keyboard)
This video is not from me, but it shows the problem.
Have a look at 13:28 and 13:37. The reviewer tries to hit the "Ackermann" entry, but the touchscreen does not recognize the touch. At 13:37 the guy has to press another time to get the entry selected.
http://www.youtube.com/watch?v=VRid-Yhu7Gg&feature=player_embedded

Yes! The touchscreen is definitely less sensitive than my old HTC Hero, and gets quite frustrating sometimes when a scroll misses the first part of the movement or a click is missed.
Sent from my LG-P990 using XDA App

just in case, are you guys using 20110218 baseband too?

The same problem here. If I unlock the screen and then tap on any on screen apps, I need to touch again for it to open. Only the first time though, after that it function ok. I think this is a bug and needs to be fixed... I have my pc for double-click.

Yep, count me in. Same problem here. Sometimes screen taps aren't registered. Will do some research later on, but I think it's a software problem. (maybe you have to tap 2x as fast )

Hi,
same problem here!

Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.

9mmBullet said:
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
Click to expand...
Click to collapse
I see, then probably they will fix it on the next update/gingerbread?

Same issue here.

Correct me if I'm wrong, but the problem seems to be that the screen has zero tolerance when it comes to tapping and swiping together. If you tap and slide your finger a bit directly after the tap, the tap is ignored. In other words your tap has to be a steady tap when you click on a button or an app. Right on the spot and with no swiping or sliding afterwards. I can't reproduce this on any of my other devices.
Ergo, it seems that the natural tapping I'm used to isn't working on the x2. It seems like I have to adjust my tap. I think that this could in principle be solved with a setting somewhere, because clearly the x2 is capable of registering this in for example a web page.
The great thing of this is that you can safely tap and swipe in the app drawer to scroll up and down or left and right. The downside is that a tap with a little swipe isn't registered at all. I would say that LG has choosen here for a wrong setting.

My personal experience about screen sensivity.. can you confirm if it's the same for your device?
I noticed a strange touch response.. and after some tests, I can say that the touch screen and icons are influenced by the surface where the phone was put!
with the phone in my hands, it's all ok (only sometimes - rare - I need to tap more than once).
If I put the phone over a glass surface (like a glass table) without touching it with both hands, the touch and the icons not respond!! NEVER!
If I put the phone on my scanner the touch screen works ok, but the icons not (or only few and rare taps was detected).!
If I put the phone over my big Onkyo amplifier.. It works like in my hands.. or better!! even without touching with hands.. only with a finger!
Put it back on my glass table.. and all stop working again. If I put a aluminium foil under the phone (between phone and table).. the touch and the icons works again !!
If I put it on the bed.. it don't work.
LG support say that they have tested the phone about this issue after my report.. but no strange response was detected by them. I don't know if they really tested it..
Try it and let me know what you think about!

tested on glass surface, I can press and swipe through pages with a finger without problem.
it is true that my device is not so responsive, but aint reaching that level yet

i read about a similar behaviour on other devices because some devices need a proper grounding for the capacitive screen to work correctly. You can find this problem via google.
Some devices have problem in a car-mounting, for example.
But i think thats not the problem the thread-opener talked about?

Guys I'm looking to get this phone and after reading Engadgets review of the X2 where they mention that the screen is not as sensitive to the touch as other phones I got a bit worried and started googling which lead me here!
Is this true? The screen isn't very sensitive and you have to apply more pressure than other capacitive phones?
I know that the OP is talking about a different issue but I reckon LG will get that sorted out via software update, or at least hope so!
Please do post your experience about the screen sensitivity of the X2 as this is putting me off. I currently have the Motorola Milestone 2 which is very sensitive to the touch even with a screen protector on it.
Cheers

touchscreen issue

Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?

Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed.

This is the moto x section not moto g
Sent from my XT1096 using XDA Free mobile app

touchscreen is laggy

Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?

I think the problem is with your phone or bed.
I did exactly like you said, I put my phone on the bed and opened calculator with only one finger and pressed 1 for 20 times and it didn't lag at all. I didn't touch the phone with any other part of my body other than my finger.
Normally I touch my phone with only from the wrist up which is my fingers. Remember never to touch your phone with anything below the torso.

Thanks for reply. But your phone is moto g 2nd gen?
Please try it with no charging. And also try it on sofa and other surfaces.
Thanks

Please don't plug the charger, usb cable and spesker then try this on bed or sofa or any other surfaces. And also don't forget to dont toych the phone with any part of your body.just only your finger
Thanks

hanyghazal said:
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?
Click to expand...
Click to collapse
I tried with my Moto G2 , but didn't faced any issue like you mention .I think the problem is in your device, get replace it.

Thanks for reply. The problem that i got this mobile from amazon in us when at a trip in us but now i back to my country and i dont know when i will travel again to us. Need advice
Thanks

hanyghazal said:
Thanks for reply. The problem that i got this mobile from amazon in us when at a trip in us but now i back to my country and i dont know when i will travel again to us. Need advice
Thanks
Click to expand...
Click to collapse
If you have the paper or whatever amazon provided during the purchase, you can contact amazon through their website and then mail to product to amazon. If everything is done properly they should send you another phone which doesn't have this problem.

hanyghazal said:
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?
Click to expand...
Click to collapse
hi, I have the same problem and i just wanted to know if you have solved it in some way, I think I will try a replacement from amazon, hope i will not get another faulty one