[Q] Phone hangs - USB Mass storage / Camera - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hi,
I haven't been able to identify the problem.
When I try to connect my phone as USB mass storage (Settings -> Other -> USB Tools - "Connect to computer"),
it works fine for 1 minute. Then the phone hangs and restarts itself.
Also when I open camera from the lockscreen, it gets stucked often. I can see the picture but controls do not
show up, I can't do anything and phone restarts itself soon too.
I have tried to wipe the phone, now changed the kernel. Last option would be to go back to GB 2.3.x and test that.
Thanks for any suggestion
GT-I9070P, Android 4.1.2 (I9070PXXLPE), original kernel + now CoCore-EP-8.8

Related

Screen broken, need to recover data from internal storage

Hello, my Samsung Galaxy S I9000 fell and the screen is broken.
When I turn on the phone, I can hear the start up sound. When I connect it to PC, the drives are recognized but not mounted as I cannot select the menu in the phone.
USB debugging was not selected.
Is there a way to access the internal storage as I need to recover the data?
Please help.
1)activate phone in recovery mode (POWER+VOL UP+HOME)
2)connect the phone via usb to a computer
3)use adb to recover your files (i would recommend checking this guide or any other you can find, if you dont know how to use adb: http://forum.xda-developers.com/showthread.php?t=619153 )
You can mount USB Storage in CWM Recovery if you have it. If not try to flash a kernel with it, like CF-root or Speedmod.
Having the same problem, however I can't enable USB Debugging as my touchscreen is non-responsive and my android device doesn't support OTG USB mice etc
jleafe said:
Having the same problem, however I can't enable USB Debugging as my touchscreen is non-responsive and my android device doesn't support OTG USB mice etc
Click to expand...
Click to collapse
you have a big problem, have you try with linux, like ubuntu, perhaps you have more luck
You can flash cf root which comes with CWM recovery. Then mount USB storage with cwm recovery (press volume up+home+power) then you can access the internalbsd card.
similar problem
Hi I have a very similar problem with my Xperia S LT26i. I dropped it into the bath and it was only in the water for about 30 seconds. Now the touchscreen is not working and the colour has stared to bleed out of the screen. the screen was fine first (looked normal) but now it is very faint and mono-colour which seems to keep changing for dark to white.
I have plugged it into three different computers now and the phone is shown but nothing in it is shown. The USB debugging was not enabled, as previously I didn't know this had to be enabled. Please tell me there is a way around this? the phone itself is still working as I have had a phone call and texts come through. really want to save my data please help!
PC companion doesn't read it either as it says the phone has to have USB debugging enabled. also apparently the Xperia S doesn't have a recovery mode.
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it
Click to expand...
Click to collapse
Link here

[Q] Phone Reboots When Connected in USB Storage Mode

Hi all,
Please bear with me as I'm a newbie here. I have an O2X with stock rooted V10A rom with modded status bar courtesy of UOT Kitchen (framework-res.apk taken from my stock rom). A month ago I installed an app called rescan media that requires usb debugging mode turned on. Then right after installing the app (with usb debugging mode on), I flashed the modded files from UOT Kitchen.
And now I'm beginning to notice a problem that wasn't there before I installed the app and flashed the customized files. Everytime I connect my phone to my laptop in usb storage mode, my phone reboots. Then after rebooting once, I can connect in usb storage mode without any problem. But later on the rebooting problem will show up again, and I don't know why.
What I've tried so far to get rid of the problem without luck :
1. Uninstalled rescan media and turned off the usb debugging mode;
2. Turned on usb debugging mode;
3. Wiped cache and delvik-cache then re-flashed the modded files from UOT;
4. Moved some apps that I noticed running in the background from SD card to internal memory.
Any suggestion how to fix this? For me stock ROM is good enough for daily use so I'd like to stick with it if possible.
i think you should update your firmware.. dont use v10a.. CMIIW
I'd like to upgrade my f/w but since I don't have unlimited internet access I'll wait til official GB is released. And before I installed rescan media, turned on the usb debugging mode & flashing modded status bar I had no such problem.

USB Mass Storage Problem. Plz help

Suddenly this error has started to appear no matter on whichever system I connect. It was working fine the other night and I have always used this method for backup on my system.
Whenever I am trying to connect my Note to PC (for USB Mass Storage) I am getting an error "USB is connected. Remove the cable". I tried formatting USB storage, clear dalvik cache, wipe cache, factory reset, nandroid restore, enable / disable USB debugging, unmount SD, PC kies update, battery removal ... jut about everything but the error always persists.
On the other hand on all windows system (XP, Win7) it displays error "USB not recognized. One of the device malfunctioned". I tried reinstalling drivers, updates Kies but it is still the same.
Request all to kindly help. Thanks in advance.
PS: I am on GB 2.3.6 DDLB2 root+CWM
Ok here is the solution. It worked for me. Hope it helps someone
1. Unplug the USB cable
2. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
3. Plug the USB cable.
darthvedor said:
Ok here is the solution. It worked for me. Hope it helps someone
1. Unplug the USB cable
2. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
3. Plug the USB cable.
Click to expand...
Click to collapse
This did not work out for me. When I dialled, I got "Connection Problem or invalid MMI code".
Can you please help?
My OS version: ICS 4.0.4 Stock rom from Samsung. Phone is not rooted.
I am directly connecting to my Laptop (and not to USB hub) which is running Windows 7 Home premium.

[Q] Tab plugged on USB is not showing in Windows since Jelly Bean upgrade

I have installed Cyanogen 10 Jelly Bean (build 2012-10-30) on my P7310, and everything went fine. I love it. :laugh:
Now the tab is charging when connected to my PC (Windows 7 x64). The problem is my tab it is not recognized by the PC as a USB device any more, the tab does not even show up in the device manager at all (Windows does not make the "new device" sound when I plug the tab).
I have tried to reinstall Samsung USB driver (v 1.5.15.0), I have rebooted the PC and the tab (many times), tried on two different USB ports, tried with Samsung Kies (nothing detected), tried with debug mode enabled (with Samsung ADB driver installed). Nothing, except when in debug mode, the device is displayed but I can't access the files stored on the internal SD card.
I would like to restore my Titanium backups, but for that I need to copy the backup files to my tab
Does anyone have similar problems with Cyanogen 9 or 10 on a P7310? Any clue on how I can try to solve this without restoring my tab to a previous Android version? Thanks!
I just found the answer in another thread: http://forum.xda-developers.com/showthread.php?t=1951110
Go to Settings -> Storage -> (use menu "USB computer connection" at top right corner) -> check "Media device (MTP)"
As simple as that. :angel:
I can confirm this! easy solution for a long search

Can you help me with accessing internal memory on bootloader

Hi Moto Z3 fans,
Does somebody can advice me with the following issue.
My MotoZ3 wont start normally - after last phone call it just stop working.
Once I try to push the power button nothings happened.
When I connect the phone to AC power the charging icon only flashes without indicating that the battery is charging.
When the phone is connected to charger or USB port on the computer I cannot start loading via power button.
when the phone is on the charger USB port I can only start the boot-loader menu (fastboot mode) by pressing the buttons: power+volume down. If I choose some of the options (Start OS or Recovery) I can only see initial Moto icon - when the operating system starts and after about a second, the phone restarts and tries to reboot and so on.
I need to copy files from the internal memory of the phone ... I try the following methods:
- Install ADB on the computer(+ drivers), connect the phone to USB port and start boot-loader. When I check device list in ADB it is empty, so I cannot start copy data from phone via ADB. (I don't think that USB debugging was activated before the phone crashed)
- Install LMSA on the computer but there is no option to access internal memory on boot-loader screen. In my case I can only use Rescue option that will flash the phone. In this case LMSA can establish connection with the phone during boot-loader.
I really need to copy data from internal memory before give the phone on the phone service.
My question is the following: it is possible to access the data only on boot-loader menu and how. If it is possible where I am wrong. Does I need some another tool.
Thanks in advance to all of you.

Categories

Resources