Related
Hello. I bought a galaxy note on 28th november. After only 2 weeks of absolutely normal and careful use, my screen is scratched and broken. Ok, it is a small crack, but it is not good.
It never fell and it never hit anything. After only 2 days, i noticed some scratchs and some other came in the days after. Then, the part of the screen between the upper edge and the speaker broke in two, with a crack (small, 5mm but still a crack) going from the edge to the speaker. I can't post a photo as i sent it back to samsung for repairs (it had also display issues). Do you know a reason for it? It should be gorilla glass, and i only kept it in my pockets without anything inside apart the smartphone. Do you think samsung will repair it since it happened during normal use after ONLY 2 weeks? I'm really annoyed and disappointed.
Anyone experiencing glass resistance issues?
Thanks
Call samsung and send it in they will fix it..
Sent from my SPH-D710 using Tapatalk
Yes, i did it and i'm waiting, and i also adressed the lines issue and the green/banded screen, but i am in italy and i'm not sure if it is covered by warranty, it should: they can say i broke it.
The Corning Gorilla Glass was one reason I went with the SGS2.
The other reason was fear of provoking the wrath of God for having such a sensationally beautiful device (the Note). It's an awesome device, really.
But God smote those who worshiped a golden calf, too.
lol Sorry, I'm not really a religious fanatic. But yeah, sucks about your screen. Hope Sammy fixes that one up for you.
Welcome Nickelsilver and please don't take this personally and in NO way I'm defending Samsung or the Note but I have to say the neither scratches or dents/cracks come by their own.
They just don't happen/appear magically by themselves on the phone's screen/body. Maybe someone is messing with you Note without you knowing it?
E.g: I have 1mm small and barely noticeable scratch on the top left corner which I suspect it came from the ONLY 1 time my Note slipped from the passenger's seat and fell in the gap between the passenger's door/seat.
I went through 3 screens on my dell streak. Now that I have the note which is even bigger I was so cautious I treated it like a delicate fragile little flower. Needless to say after 2 weeks I noticed what appeared to be a scratch going up from the bottom middle halfway up. Turns out this is not a magical scratch that sprang out of nowhere but an actual crack on the outer glass screen. I have never dropped it but perhaps it was somehow flexed.
No warranty of course. I have ordered the glass itself from overseas and when it gets here in a month I suppose I will try replacing that piece individually as its only the outer glass that seems cracked. Hopefully they do not glue the screens together like they did in the streak ><
Another boring witch hunt thread (yawn)
Gaugerer said:
Another boring witch hunt thread (yawn)
Click to expand...
Click to collapse
To OP: im sorry to hear that....hope samsung can fix it for you quick.
Ps. Dont listen and worry about this guy...he thinks only his opinions are important and others experiences are just JUNKS and BORING! Not sure why he would even bother to reply, if they really bores him that much. Maybe he really thinks that he BOOFY the witch hunter or something
Plus.. He forgot that he has also once posted a question regarding to his screen problem too here on the forum.
Gorilla glass is bull****. I had dell 5 streak, and I changed the screen more than 5 times. Little drop will result in screen loss. Do not depend on gorilla glass.
My Samsung Galaxy Note are broke
Yesterday I was knocked out of the hands under my 40 days old Samsung Galaxy Note, the cover glass is cracked along its entire length as a spider's web, while the LCD screen is not damaged, that still works, receiving the touch command. The solution I found in the orders of the new protective glass over eBay. Maybe that was too much angry because it happened to me, but NOTE is too amazing, and I somehow survive.. I'll let it be when we come new safety glass
I do not think this is a witch hunt. More of an informative thread on one weakness to an otherwise amazing device. It may be that until an indestructive clear glass is created that we will continually face this on any large phone. Anything this large will flex easily and likely crack. One thing Samsung definately did right was not glue the glass to the LCD behind it. I put a clear screen cover over mine and you cant even see the crack anymore. Were this a dell streak you would have half of your screen blacked out.
This is definitely the best mobile device out there in my opinion, people should just be extremely cautious with where they carry it. Mine most likely cracked in my pocket from slight flexing.
The glass on the note shouldn't break even when flexed unless it's not Gorilla glass.
Gorilla glass is not only scratch resistant,it is also shatter resistant.
If the glass is breaking frequently on the notes,then I wonder if they really have Gorilla glass.
noteworthy said:
The glass on the note shouldn't break even when flexed unless it's not Gorilla glass.
Gorilla glass is not only scratch resistant,it is also shatter resistant.
Click to expand...
Click to collapse
Not proof.
Croak said:
Not proof.
Click to expand...
Click to collapse
I know this is not 100% proof but look at this demonstration.
http://www.youtube.com/watch?v=MYaQnvVwStc&feature=player_embedded#!
noteworthy said:
I know this is not 100% proof but look at this demonstration.
http://www.youtube.com/watch?v=MYaQnvVwStc&feature=player_embedded#!
Click to expand...
Click to collapse
That demonstration glass at the beginning of the video is about 3 times thicker than what Samsung uses on the Note/Galaxy S2/Galaxy S SAMOLED panels. And it's quite a bit smaller, height/width wise (it's about iPhone 4 sized).
Thickness makes a significant difference in flexibility and shatter resistance. Which is off on a tangent, because the main reason Samsung and others uses GG and similar techniques is not for shatter resistance.
It's almost entirely for the combination of higher scratch resistance vs metals (all bets are off with sand particles) and a better tactile feel (it's smoother) than non-treated glass.
Sure it may not be as thick on the note but you are never going to flex the phone anywhere as much as that demonstration.
My point is that if it is gorilla glass,it shouldn't be that easy to crack the screen given the abuse that it is supposed to be able to take.
All these? Gorilla Glass
And all these? Gorilla Glass
How about all these? Gorilla Glass
Or maybe all these? Gorilla Glass
It's been 10 days since i bought "the Note". I dropped the device just once from 1 meter height. It was a free fall with not much impact power. The screen has a crack on the upper right corner. I know every product is meant to last but so easy , so fast ! ??? Thankfully it still works with no functional issues. It's just the protective glass on top of the actual LCD that is broken. But u can still feel it while wiping your finger and it is appearent...
Hardware wise The Note is simply outragous but when it comes to software and durability it can't even come closer to what i used to find on HTC devices
captainhakan said:
It's been 10 days since i bought "the Note". I dropped the device just once from 1 meter height. It was a free fall with not much impact power. The screen has a crack on the upper right corner. I know every product is meant to last but so easy , so fast ! ??? Thankfully it still works with no functional issues. It's just the protective glass on top of the actual LCD that is broken. But u can still feel it while wiping your finger and it is appearent...
Hardware wise The Note is simply outragous but when it comes to software and durability it can't even come closer to what i used to find on HTC devices
Click to expand...
Click to collapse
The weight of the note will count against it during falls compared to say a very light phone like the SG2.Impact is going to be much harder if they both fell from the same height especially given te size of the notes screen.
Until they can make the note lighter,users will just have to be more careful not to drop it.Gorilla glass is not unbreakable.
I get my note tomorrow. Now I'm all paranoid
hi folks. i managed to replace my galaxy note front glass with a new one i got from ebay for 19$ and i want to make a step by step guide on how it can be done.
i did it using common tools and a s load of pacience and attention.
the tools i used are: heat gun with hi and low settings, exacto knife set,small phillips and flat screwdrivers, goo gone, and optional a screen protector.
first take the phone apart as it's describet in countless of threads and youtube videos. you should end up with the screen assembly shown in the first picture.
now we have to separate the glassscreen from the frame it sits on. for this we fire up the heat gun.
a few words about using the heat gun.
-my gun had 2 settings: low and high. during all this process i used it on low.
-don't put the gun directly and/or close to the thinn plastic wires that hold the two connectors.
- dont hold the gun in the same place more than 3 seconds, instead swipe the gun around the spot and the screen like u would do with a paint brush when painting.
- dont hold the gun too close, that is closer than 3 inch
-concentrate on the spot u working at but try to heat up the whole screen assembly, as it has to give away from all the points kind of at the same time, and not just the point u working at.
- dont overheat the screen as this will damage the amoled. thats how i got the two yellow spots on my screen. first one by accident and second one intentionaly to see if indeed the overheating is what caused it.
A very good rule for this is dont heat the phone more than you can bear to touch it cause afterall you have to hold the phone while working on it...
the way i did it is :
-i heated up the whole screen assembly, back and front, for a minute or two
- than i started to stick the tip of the exacto knife between the glass and the metal edge that sorrounds it. i started from the upper right corner, the side where the front camera is. see photo 2.
the goal is to unstick the glass from the frame. in photo 3 the frame and the screen is shown without the upper glass. this photo was taken after i finished everything, thats why the screen can be seen inside the frame. but i posted it to show the black sticky tape that its used to hold the glass to the frame. i think is the same kind of sticky tape thats used in all the touchphones including iphone to hold the front glass to the rest of the phone. in photo 4 i unsticked some of the tape to show it better. this tape is the main thing that holds the the glass to the frame. the other thing that hold the screen to the frame is some sticky glue on the back of the screen. but this is much softer and thiner glue. this is the reason why i say to heat up the whole screen assemby including the backside, to make it easyer to unstuck the glass and scren thats glued to it.
- once you get a bit of a foothold in the upper corner between and the glassand the frame you continue the folowing procedure again and again until the glass and screen detaches from the frame:
-every 2 minutes or so , when i feel the asemby cooled down, i'd heat up the whole assembly for 5 seconds or so, than concentrate on the spot i worked on for another 5 seconds, than move/push the exacto knife a bit. dont force it. after a while youl get a feel of it. if the exacto knife happend to be out, i would heat up the blade after heating up everything else, and than put the blade in.
prevent the freed parts from sticking back to the frame by using the rest of the exacto knife blades as shims.
once it detaches it should look like photo 5- the glass glued to the screen.
- now we have to detach or unglue the glass from the screen.
procedure is the same: start somewhere, heat, put knife in, etc... i used a second knife as shim folowing the first knife, and after avery couple moves i would get the knife out and wipe off the epoxy glue. heat the blade and put it back in.
when finished you should have something like photo 6 and 7: free screen covered in glue epoxy residue.
- now we have to get rid of the glue residue. i took the bulk of it usinga flat exacto knife blades like the one in photo 8 and 10. just warm the place a bit with the air gun and scrape it off with the blade. to clean what was left i used a bit of goo gone on a pice of cloth or napkin photo 9.
cleaned screen can be seen in photo 11 - sadly out of focus.
if u are like me and r impatient to test the screen you can just connect with just the side connector like in photo 12 and 13. the upper connector is for the s pen digitizer. side connector is for the screen and touch digitizer.
now all that's left is to put the phone back together except leave the new glass for last.
-first thing is to put the screen(without the glass) back on the frame. try to center it just right, so that ther's a little bit of space between the sides of the screen and the frame.
at this point all that will hold the screen to the frameis the thin layer of glue on the back of the screen. after centering and lowering the screen in the frame procede to put the phone back together folowing in reverse order the same steps used to disasambe it. when finished you should end up with the whole functioning phone except the front glass -as seen in photo 14.
now you can chose to trim and put a screen protector on the scree so as to fill the empty space between the screen and the glass - the space where the glue was, or you can just leave it empty. you can put a screen protector anytime after by removing the glass. which should be much easier to remove now that its held in place only by the blach sticky tape on the edges. just use some suction cap to remove it, starting at an age, and remove it like fliping a page. see photo 16. i used the note for 2 weeks without the screen protector in the empty space and it worked without a problem onlt thing was that when i pushed hard the glass would touch the screen and leave a bit of dirt in that place. thats why i decided to put the screen protector to fill the void. in photo 15 i raised the screen protector to make it visible in the photo.
if you are like me and worry that somehow the glass might fall off the phone you can always get a hard plastic case for the phone, like the one in the pics. it's made of 2 parts. one goes on the back one on the front and they snap togeter around the phone. this will hold the glass in place no matter what while it will also protect the phone.the case is in photos 17 and 18. i got this one of ebay for 8$ and free shipping.
the last thing to be done is:
for some reaseon the touch screen became much more sensitive after removing the glue so you need to lover the touch sensitivity. for this get the touchscreentune app from the market. it works with galaxy note and galaxy s2. put the sensitivity from the recomended 25 to 50.
the best thing about this procedure is that i dont have to worry about the f ing glass anymore. if it brakes again i'l just order another one and in under 2 minutes i can replace it. all i have to do is get the phone case off, put a suction cap on , , remove the old glass , and put the new glass. that's it.
because it takes 4 to 8 hours i would recommend the process to be done in 3-4 sessions as people would get tired after 2 hours of work and tend to lose focus, attention, patience and start to push to get it faster done, and that's when bad stuff happens like yellow spot burn on the screen or small scratches. another thing about scratches, even if u manage to scrach the screen dont worry to much as the scratches are almost invisible when the screen turns on. youl see what i mean ....
i do have one question: WHY DID SAMSUNG DECIDE TO GLUE THE SCREEN TO THE GLASS INSTEAD OF HAVING THEM SEPARATE LIKE ALL THE OTHER TOUCHPHONES?
I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.
blank for future use
blank for future use
anonymous572 said:
I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.
Click to expand...
Click to collapse
what kind of glue did you use? where did u get the glue from? how did u do it?
i didnt glue the glass back to the screen. i just put the glass on the frame. to fill the void where the glue was i trimed a regular screen protector and put it inbetween the glass and the screen. but it works same without it.
Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*
pboesboes said:
Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*
Click to expand...
Click to collapse
Nothing is impossible with the right tool and know-how . The glue could probably be uncured with a heat gun, just like ipad. The challenge is not damage the panel and make sure it is dust free after put back the replacement.
It is said impossible because of the difficulty involved. If you can't manage to install a screen protector with perfect alignment and zero dust spike, this task is not for you.
@drevilatwork Thank you for writing this step by step guide!
I dropped my phone last night and it landed face down, cracking the glass.
I'm so upset, but I don't think I have the skills or the tools to do this job myself. I am relieved to learn that the glass can be replaced, but do you know whether the Samsung agents are likely to be able to do this?
they probably wont do it. but you can try showing this thread to some technician or phone repair shop and they might do it for you. they also might charge you a lot to the point where it might be more convenient to just buy a new 260$ screen.
looks scary dude
all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...
Its worth a try, since screen replacement costs 230 euros.
kawgirlval69 said:
all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...
Click to expand...
Click to collapse
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.
Why different prices for all the same lenses in this shop ?
drevilatwork said:
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.
Click to expand...
Click to collapse
as i said good luck with it and hope you make some money doing it..... ive successfully done the same thing myself but other than it will never look good like a factory screen (not even close), the amount of time it takes to make it look anywhere near acceptable (not like a 10 dollar repair) is big and that makes the repair not really worthwhile doing it for anyone but yourself and even then who spends 700-800 dollars on something and does a repair that makes it look cheap... then theres the whole ordeal of the membrane youre taking the adhesive off of along with the HUGE chance of damaging it.. it is placed with precision and adhered for a reason along with being dust and scratch free... this is a repair that just wont last because things will start functioning improperly for multiple reasons...
im not knocking you or anyone who tries this..im just trying to emphasize the dangers, downfalls and the probability of it being a legit solid repair. also the resale value when the next greatest thing comes along... just beware....
Hmmmm
Well chaps I hate to disagree here, but after speaking to the technical bods at Samsung it appears that the OLED is NOT glued to the glass, but the glass is laminated and bonded in, much like a car windscreen. My screen got broken the other day and I have read the 2 posts on XDA regarding this. Now if you go and have a look at the pics of the other post
http://forum.xda-developers.com/showthread.php?t=1487716
you can clearly see the OLED, although broken, seperated from the glass with no sign of any glue. The reason it broke is that upon heating the glass you will melt the glue, which will then stick to the edges of the OLED and if you pry it at the wrong place/time/too hard/whatever you will break the OLED as it is glued to the bezel itself. So when my glass arrives I am going to attempt to remove the glass using fishing line and pulling it between the glass and the bezel and OLED to release it, the same way as I used to remove car windscreens, and post the results here. I have also been told that the reason for the sticky "epoxy" mess that you encountered in this postis from melting the plastic on the back of the glass (which is the lamination!) by using too much heat.....I mean come on, a heat gun is a bit excessive!! Prying the screen out a bit at a time might work, but will surely end in tears, where as cutting the cold adhesive with a fine nylon cable, which wont scratch the OLED, might just work. I'll keep you posted on my results.
Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.
pboesboes said:
Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.
Click to expand...
Click to collapse
this is not one of them...i can guarantee this 100%
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee
kawgirlval69 said:
this is not one of them...i can guarantee this 100%
Click to expand...
Click to collapse
What do you mean? One of what?
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
Click to expand...
Click to collapse
I know how a digitizer is made.
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
Click to expand...
Click to collapse
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
Click to expand...
Click to collapse
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee
Click to expand...
Click to collapse
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.
pboesboes said:
What do you mean? One of what?
I know how a digitizer is made.
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.
Click to expand...
Click to collapse
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION...
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep
kawgirlval69 said:
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
Click to expand...
Click to collapse
The sentence made no sense considering what it was replying to. Not my fault you were unclear/ambiguous.
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
Click to expand...
Click to collapse
Ok?
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
Click to expand...
Click to collapse
Reading is very good, but you can't assume everyone in a public forum has read every single post of yours and remembers every detail. What isn't helping is the lack of proper punctuation and formatting which make your posts unpleasant to read.
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
Click to expand...
Click to collapse
Replacement screens are generally OEM parts.
It might appear I'm in a hole, but that's only because I live in Holland and am below sea level. I assure you I haven't done any digging.
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
Click to expand...
Click to collapse
I wasn't suggesting to use superglue or epoxy, read it again.
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION
Click to expand...
Click to collapse
I get that, and appreciate your concern. However, you should understand that some people like to try things even when the chance of success is not very high. You seem to be one of us in that regard (you attempted repairs yourself too, right?), so I don't see why it upsets you so much.
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep
Click to expand...
Click to collapse
I don't care if you play nice or not. I appreciate honesty. Now for some honesty in return: you're not helping in this thread.
All you do is say people's ideas are stupid without giving arguments that aren't arguments from authority. And I would very much appreciate it if you would stop misrepresenting my posts (intentional or not).
enjoy!
http://www.youtube.com/watch?v=TAExzHJIHHE
Wow, I cringed when he used the box cutter. I was sure it would leave a few scratches. Thats awesome. Im still getting protectors for the front and back though lol
Yea you're right to be careful, my S3 was supposedly scratch resistant, scratch tested with box cutters etc yet still got a huge load of scratches on the screen. Apparently sand/dust in your pockets is the cause (has to be, never dropped it or anything)
I don't know why these videos exist, they test objects that everyone knows will not scratch the screen,
Metal is softer than normal glass, let along toughened mobile phone glass.
Most people do not realize that. My mother for instance puts paper towels on her counter beneath wood cutting plates so the wood doesn't scratch the stone. lol
Plus, there are people here that are complaining about getting magical scratches and breakage.. It would be good for them to watch...
sent via xda premium with nexus 7
Rusty! said:
I don't know why these videos exist, they test objects that everyone knows will not scratch the screen,
Metal is softer than normal glass, let along toughened mobile phone glass.
Click to expand...
Click to collapse
True ... bus has we have soooo many people in here complaining that the phone scratches by himself ... without any object at all ... this test seems fair to me.
The conclusion is ... please fill your pockets with keys, coins and the nexus4 ... it will be safer than to walk with the phone alone in the pocket ...
hdsousa said:
True ... bus has we have soooo many people in here complaining that the phone scratches by himself ... without any object at all ... this test seems fair to me.
The conclusion is ... please fill your pockets with keys, coins and the nexus4 ... it will be safer than to walk with the phone alone in the pocket ...
Click to expand...
Click to collapse
Isn't it a little contradictory? These videos can't scratch either the back or the screen. But here, people are having scratches out of nowhere. This confuses a potential buyer (like me).
What should I do? Should I buy one?
They're not getting 'scratches out of nowhere' they just don't know how they did it.
Little tiny bits of grit will scratch any bit of glass.
R3ACTOR4 said:
Isn't it a little contradictory? These videos can't scratch either the back or the screen. But here, people are having scratches out of nowhere. This confuses a potential buyer (like me).
What should I do? Should I buy one?
Click to expand...
Click to collapse
Dust particles or sand make the most scratches from what I can tell. I think you should buy it, I will when I have the chance.
But I'll also get a satchel or something I can keep it in.
Yea people complaining about dust scratching their phone have a defective phone or just really bad luck somehow
myorks1127 said:
Yea people complaining about dust scratching their phone have a defective phone or just really bad luck somehow
Click to expand...
Click to collapse
what? No its the opposite dude, dust can contain sand... sand is hard enough to scratch class.
metal is too soft, keys are too soft, they'll never scratch gorilla glass
Cool. Drop test?
Sent from my Nexus 4 using xda app-developers app
you can find it on youtube
Inviato dal mio LG-P920
I frequently carry loose diamonds/rubies/emeralds in my pockets
I want a sandblast test.
its scarachable alright..
i was at a casino i had couple chips in my pocket.. that night i was a lil buzzed but i do remember everything.. my N4 got a scratch on the back from the chip.. the reason i know its from the chip was because the color was kinda embeded into the back cover.. not embeded literally but u get the meaning..
Androd - A true story. said:
i was at a casino i had couple chips in my pocket.. that night i was a lil buzzed but i do remember everything.. my N4 got a scratch on the back from the chip.. the reason i know its from the chip was because the color was kinda embeded into the back cover.. not embeded literally but u get the meaning..
Click to expand...
Click to collapse
So how much did you lose man?
666fff said:
So how much did you lose man?
Click to expand...
Click to collapse
LOL.
On topic, this is actually confusing for a buyer lol, "random" scratches just seem unlikely to affect the phone..
Sent from my Koodo SII X (T989D)
https://www.youtube.com/watch?v=nlgG33n71m0&feature=youtube_gdata_player
For anyone who is interested the link above is a drop test. Not English. German or Austrian I think.
Sent from my Nexus 4 using xda app-developers app
nic85 said:
enjoy!
http://www.youtube.com/watch?v=TAExzHJIHHE
Click to expand...
Click to collapse
Stopped at 0:10 when the camera is CONSTANTLY out of focus.
My N4 finally came today and everything on it is perfect, no buzzing noise, no reboots, no yellow screen. But there is a very small indentation on the bezel. It's not a scratch but it looks like something from when it was manufactured. I'm just gonna keep it, it adds personality to it
Lol.
10 char
Hmm..got a picture?
Good decision. Unfortunately the bezel is vacuform plated plastic, and by its very nature is prone to blemishes (as are the buttons); my only real pet-peeve about the construction of this phone.
This thread is as useless as my nipples.
I'm having something similar I think. It's on the upper bezel....it's like a 1 inch horizontal line (when holding the phone in portrait) on the upper bezel. It's like it's underneath the glass, and it's like a 1-inch wavy line. Initially I thought it was residue from the factory plastic...but when I wiped, it would not go. It's some sort of molding-related thing to the plastic I'm sure.
It doesn't bother me as I know the manufacturing isn't perfect.
What bothers me is how small the phone is. Lol. I've been using the N7000 for so long I'm actually worried that this phone will slip out of my hands. Lol.
The size difference in screen is astounding....I'm having "some" reservations about keeping it.
It's also unfortunate that project butter is not all it's hyped up to be. I've seen it choke already on 3 occasions within the first 5 minutes. I guess I'll just remind myself that I've only paid $349 for this.
PoisonWolf said:
It's also unfortunate that project butter is not all it's hyped up to be. I've seen it choke already on 3 occasions within the first 5 minutes. I guess I'll just remind myself that I've only paid $349 for this.
Click to expand...
Click to collapse
in general UI it makes a noticeable difference however lots of apps still do not default to GPU rendering and tend to stutter; you can force it in the developers options however its not a perfect solution.
I also have something I'm not quite sure about what it is. It seems to be a little piece of rubber/plastic/whatever sticking between bezel and glass. It's between front facing camera and earphone. At first it looks like a scratch and when you look closer it looks like the rubber that comes up if you pry up the iPhone's Display for repair. Are we talking about the same?
phil_ffm said:
I also have something I'm not quite sure about what it is. It seems to be a little piece of rubber/plastic/whatever sticking between bezel and glass. It's between front facing camera and earphone. At first it looks like a scratch and when you look closer it looks like the rubber that comes up if you pry up the iPhone's Display for repair. Are we talking about the same?
Click to expand...
Click to collapse
No.
Mine is something underneath the glass, in the middle location of the upper bezel, a wavy line about 1-inch in horizontal fashion when held in portrait mode.
It's below the speaker, to the left of the front facing camera. In the middle region. Some sort of molding-related issue. There is no scratch on the glass, etc. It's like when the bezel was stuck onto the glass, it was not perfect, etc.
It's a minor cosmetic issue though. Doesn't affect the functionality of the phone.
Toaster Strudels said:
This thread is as useless as my nipples.
Click to expand...
Click to collapse
LOL I'm so funny. I make myself laugh.
IshTheG said:
My N4 finally came today and everything on it is perfect, no buzzing noise, no reboots, no yellow screen. But there is a very small indentation on the bezel. It's not a scratch but it looks like something from when it was manufactured. I'm just gonna keep it, it adds personality to it
Click to expand...
Click to collapse
Mine has same. But since no other probs keeping it.
The bezel above the usb port on mine was lifted from the body enough to see into the phone. I just squeezed it together some. All good~
Toaster Strudels said:
This thread is as useless as my nipples.
Click to expand...
Click to collapse
:laugh: Yes!
Same here there's a small mark on the top right corner
Sent from my Nexus 4 using xda app-developers app
Toaster Strudels said:
LOL I'm so funny. I make myself laugh.
Click to expand...
Click to collapse
I've laughed at 3 of your posts now. Just got a chuckle in a previous thread. Thanks.
Seems like gorilla glass 2 isnt all that scratch resistant, or you have rocks in your pocket or something. I have never caused an unintentional scratch on any of my gorilla glass equipped phones. I will probably be getting a screen protector for this one though, and will use the official bumper whenever it comes into stock. Only like 35 more weeks until I get my phone!
2 Nexus 4's both have minor imperfections on the shinny chrome bezel, which is actually plastic I believe.
1- on the bottom of the left side a minor indentation, not scratch
2- on the bottom of the right side paint bubbling out, as if there was a spec of dust when the coat of paint was applied.
The second is more noticeable especially that it on the top part, while first is on bottom part.
But both magically disappear when the N4 is put in a case.
The manufacturing imperfection that's actually getting on my nerves just because I'm OCD (I truly am, not a self diagnosis ), is the little square glass covering the camera flash, it is ever so slightly rotated that it doesn't perfectly align with the black bezel around it ... it took me a mico second to spot it out of the box, and I cannot unsee it. It cannot be misaligned by more than a 10th of a millimeter, but somehow I can see it at arms length ... I'm just crazy!
funky_snowman said:
Seems like gorilla glass 2 isnt all that scratch resistant, or you have rocks in your pocket or something. I have never caused an unintentional scratch on any of my gorilla glass equipped phones. I will probably be getting a screen protector for this one though, and will use the official bumper whenever it comes into stock. Only like 35 more weeks until I get my phone!
Click to expand...
Click to collapse
Any glass isn't particularly scratch resistant. Lint and small particles will scratch any sort of glass, or just about anything with enough force. From personal experience, I've found that Gorilla Glass 2 is more fragile than Gorilla Glass 1 because it's thinner, despite Corning's presentation of it as being able to withstand the same amount of force.
Toaster Strudels said:
This thread is as useless as my nipples.
Click to expand...
Click to collapse
LOL! I thought it was made of rubber. But that comment cracks me up
Toaster Strudels said:
This thread is as useless as my nipples.
Click to expand...
Click to collapse
This make me lough so hard...hillariously funny
Hi everyone,
I've had a display protector on my 4X (~7 months old now) from day one. Lately, I discovered some stains on the display and got a new protector. When I removed the old one, I discovered that those mysterious stains were actually on the display glass. After trying to remove them with a microfibre cloth and finally glass cleaner, I realized they are actually on the downside of the display glass.
I have no clue why they turned out now or even where they come from. The display itself still works perfect.
Did anybody of you experience the same problem? Is it a manufacturing error? Living bacteria colony inside my phone? I have absolutely no idea.
Would an error of this kind be covered by the warranty?
I've attached two pictures, the stains are kind of hard to capture with a camera, but I think you can see them.
Regards,
pint
possibly the outcome of going on XXX sites ,lol only joking, could it be caused by possible condensation or possible that the screen has got so hot sometime due to it having the protector on and staining that way
My computer screen is so dirty, i can't see what you mean
AW: Mysterious stains under the display glass
Mikey94 said:
My computer screen is so dirty, i can't see what you mean
Click to expand...
Click to collapse
Haha, same problem with me
@pitness: it seems like you're german, so check out the P880-Thread on the "android-hilfe"-forum, there is a large thread about your problem...
Well, thanks for the answers, guys.
@friartuckme:
I have an Iconia A500 for a mans special needs jk
@black-duty
Thanks for the tip, i checked the forum, but the only thread I found was "dust particles under the display"... The pics there actualy looked like dust particles, unlike the "stains" on my phone. I guess I'll just trust try to get a fee warranty repair... After all, the only thing I can imagine is actually a condensed fluid (It never got wet, so... Sweat from my pockets?! but wouldn't that more likely kill the electronics?).
edit: btw what the hell guys, clean your computer screens! totally worth it.
pintness said:
Well, thanks for the answers, guys.
@friartuckme:
I have an Iconia A500 for a mans special needs jk
@black-duty
Thanks for the tip, i checked the forum, but the only thread I found was "dust particles under the display"... The pics there actualy looked like dust particles, unlike the "stains" on my phone. I guess I'll just trust try to get a fee warranty repair... After all, the only thing I can imagine is actually a condensed fluid (It never got wet, so... Sweat from my pockets?! but wouldn't that more likely kill the electronics?).
edit: btw what the hell guys, clean your computer screens! totally worth it.
Click to expand...
Click to collapse
I got almost the same stain as you got looking from the picture and im confident that it is dust or some dirt that got in. Thats because when it first started to get under my screen it looked more like dust particles but know it more looks like a dirty stain like your pictures.
Also when i first noticed the stain forming it came in from the angle where the front camera is top right corner. I also see some slight gap there between the display and the cover at my phone.
Im going to send it back soon since it really annoys me.
I have the same problem. It's definitely no dust. The stain was small but became bigger and bigger. Have you found a solution yet? I found this post:
snekler said:
hello you ,i had the same thing with dust ,so i used this video can't post link, search youtube for 'disassembling lg p880 and i cleaned but was no dust its some sort of oxidation it was really hard to clean i used spirit ,but now its ok my screen is ok:victory:
Click to expand...
Click to collapse
Hope it helps.