Database Develop

Help me! m7 bricked..

Hello! Thank u in advance of helping me.
this is my phone info in HBOOT:
Tampered
Unlocked
m7_ul pvt ship s-off rh
cid-cws__001
hboot-1.54.0000
radio-4a.17.3250.14
opendsp-v31.120.274.0617
os-
emmc-boot 2048mb
________________________
i have touch recovery installed, but nothing on my phone storage to flash.
after get s-off my phone wont start. htc logo appears and then goes black screen.
please help me , because im loosing my mind on that...
thank u a lot!!!

Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium

Potapson said:
Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
tried it. gives me error even when type "adb devices" it shows me that its attached...

Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app

Shan89 said:
Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i can get it ...

Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614

electronical said:
Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614
Click to expand...
Click to collapse
can u give it whats it? i really dont want to mess up the things and i need my phone .... :I

i go to cid: htc_001. tell me what RUU i need please

kokobaliev said:
i go to cid: htc_001. tell me what RUU i need please
Click to expand...
Click to collapse
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're still having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.

electronical said:
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

kokobaliev said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.

electronical said:
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.
Click to expand...
Click to collapse
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?

kokobaliev said:
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?
Click to expand...
Click to collapse
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
Click to expand...
Click to collapse
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.

Shan89 said:
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.
Click to expand...
Click to collapse
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?

kokobaliev said:
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?
Click to expand...
Click to collapse
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app

Shan89 said:
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot man! im already on Android Revolution 31. thank u for helping me!

Need help flashing stock ROM on HTC One

Hi. I'v got friend's HTC One on stock 4.3 (3.63.161.6). I need to flash stock 4.3 Europe that has Polish language included.
I've downloaded this stock RUU:
RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_release_311663_signed_2_4.exe
How do I flash it? Is it safe to flash it on my friend's HTC One that has stock 4.3 (3.63.161.6), S-ON and locked bootloader (the phone was never rooted, modded etc.)? Should I first S-OFF and unlock bootloader? What tool do I use to flash this RUU? What are these CID and MID about? Should I care about them?
It's the first time I'm working with a HTC, so I'm a total HTC noob. I only had few Samsungs and currently a Nexus 4 and know how to work with these but not HTC.

daerragh said:
Hi. I'v got friend's HTC One on stock 4.3 (3.63.161.6). I need to flash stock 4.3 Europe that has Polish language included.
I've downloaded this stock RUU:
RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_release_311663_signed_2_4.exe
How do I flash it? Is it safe to flash it on my friend's HTC One that has stock 4.3 (3.63.161.6), S-ON and locked bootloader (the phone was never rooted, modded etc.)? Should I first S-OFF and unlock bootloader? What tool do I use to flash this RUU? What are these CID and MID about? Should I care about them?
It's the first time I'm working with a HTC, so I'm a total HTC noob. I only had few Samsungs and currently a Nexus 4 and know how to work with these but not HTC.
Click to expand...
Click to collapse
1- you'll need s-off to be able to downgrade
2- how about sharing a "fastboot getvar all" (removing IMEI and s/n before posting)

Thanks for quick reply. Is there a RUU stock Europe ROM in such a version, so I wouldn't need to S-OFF; so I woudn't need to downgrade the firmware?
I tried to run the RUU when my phone is in Fastboot USB mode, it started updating but it stopped in the middle of the process. Phone works normally, it didn't brick. How do I install this RUU: RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14 .3250.13_10.33.1150.01_release_311663_signed_2_4.e xe
This is the fastboot getvar all output:
Code:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. Wszelkie prawa zastrzeżone.
D:\h>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT35EW901589 device
D:\h>adb reboot-bootloader
D:\h>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.161.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *REMOVED*
(bootloader) imei: *REMOVED*
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4016mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s

daerragh said:
Thanks for quick reply. Is there a RUU stock Europe ROM in such a version, so I wouldn't need to S-OFF; so I woudn't need to downgrade the firmware?
I tried to run the RUU when my phone is in Fastboot USB mode, it started updating but it stopped in the middle of the process. Phone works normally, it didn't brick. How do I install this RUU: RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14 .3250.13_10.33.1150.01_release_311663_signed_2_4.e xe
This is the fastboot getvar all output:
Code:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. Wszelkie prawa zastrzeżone.
D:\h>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT35XXXXXXXX device
D:\h>adb reboot-bootloader
D:\h>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-main: 3.63.161.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
all: Done!
finished. total time: 0.040s
Click to expand...
Click to collapse
1- you're going to have to change CID to HTC__032 for Eastern Europe country/language
2- your MID is PN0710000, so this RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
(the other one is for PN0711000, ie M7_U not UL)
(steps 1 and/or 2 NEED S-OFF)
3- if you dont want to go through all that hassle, why not try https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale or similar and see if that does the job.

Thanks. I'm now S-OFF, changed CID and waiting for the RUU you've provided to download. I'malso on custom rom - slimbean 4.3. Do I need to somehow flash stock before installing the ruu?
OK. Im on SlimBean. I'm running the RUU fomr bootloader mode, it starts OK, asks if I wont to update from: 3.63.161.5 to: 1.28.401.7. I click next. The update starts and after a minute an error appears (error 155: error updating image) and the update stops. I can still boot the device to fastboot, so it isn't bricked. What do I do now to flash the RUU?
After installing the RUU, what do I have to do for the OTA updates to work? Do I have to S-ON or lock the bootloader?

daerragh said:
Thanks. I'm now S-OFF, changed CID and waiting for the RUU you've provided to download. I'malso on custom rom - slimbean 4.3. Do I need to somehow flash stock before installing the ruu?
OK. Im on SlimBean. I'm running the RUU fomr bootloader mode, it starts OK, asks if I wont to update from: 3.63.161.5 to: 1.28.401.7. I click next. The update starts and after a minute an error appears (error 155: error updating image) and the update stops. I can still boot the device to fastboot, so it isn't bricked. What do I do now to flash the RUU?
After installing the RUU, what do I have to do for the OTA updates to work? Do I have to S-ON or lock the bootloader?
Click to expand...
Click to collapse
NO NO, no s-on no locking!! U need to downgrade hboot to 1.44 first (& separately), then ruu will work just fine.
Check guru, or my guide in my signature (only the hboot downgrade).
I'm off for tonight...
Sent from my HTC One using Tapatalk

To expand on nkk71's post..
If you’re on hboot which is above 1.44, then first thing is to downgrade that:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
Click to expand...
Click to collapse
Then run the RUU..

Thanks a lot! So now I've got hboot 1.29.401.12_hboot_1.44 but I want to flash RUU which is 1.28, namely this one: RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe.
Is it OK? Also, I'm currently on SlimBean, can I flash the RUU straight over SlimBean 4.3, SlimBean custom kernel and custom CWM recovery?

Yes, as long as you are S-OFF... flash away the RUU. It will overwrite all partitions.

OK. I flashed the RUU. Do I now have to do sth for the OTA updates to work with the phone? Or can I start updating the phone straight away?

Not really, connect to wifi, and start smashing Check Update button.. you should get about 2-4 updates as you installed one of the oldest RUU

Thank you all for your replies. The phone now officially has polish language and I'm in the process of udpating it via OTA. Everything works fine! Thanks again

Perfect, please mark the thread as [SOLVED] and give thanks to nkk71!

[Q] No Mainver code! unknown firmware version

Hello everyone,
I have a HTC One M7_UL GSM and I am wanting to upgrade the firmware but I cannot see it when I type the command getvar all, Its just blank next to the Mainver: everything else is showing something there,
I have 1.54 Hboot and am S-OFF with latest twrp 2.8.0.0 and Cyanogenmod 11 (M9 Snapshot Build)
any help greatly appreciated I do not want to mess the phone up.

JamieBlues said:
Hello everyone,
I have a HTC One M7_UL GSM and I am wanting to upgrade the firmware but I cannot see it when I type the command getvar all, Its just blank next to the Mainver: everything else is showing something there,
I have 1.54 Hboot and am S-OFF with latest twrp 2.8.0.0 and Cyanogenmod 11 (M9 Snapshot Build)
any help greatly appreciated I do not want to mess the phone up.
Click to expand...
Click to collapse
Does the phone boot into OS? If so, then it was overwritten during either the flash of an earlier version of TWRP or Cyanogenmod. If you were to flash a new firmware then it would be restored.

majmoz said:
Does the phone boot into OS? If so, then it was overwritten during either the flash of an earlier version of TWRP or Cyanogenmod. If you were to flash a new firmware then it would be restored.
Click to expand...
Click to collapse
Thanks for your reply, It does boot up normally and the phone is perfectly fine so your saying it has been overwritten by either the recovery or custom rom and thats why it isnt showing?
based on this i could flash the latest firmware 6.09.401.5?
Again Thanks.

JamieBlues said:
Thanks for your reply, It does boot up normally and the phone is perfectly fine so your saying it has been overwritten by either the recovery or custom rom and thats why it isnt showing?
based on this i could flash the latest firmware 6.09.401.5?
Again Thanks.
Click to expand...
Click to collapse
As long as it is higher or equal to your version, and if you are s-on you will have to lock your bootloader.

majmoz said:
As long as it is higher or equal to your version, and if you are s-on you will have to lock your bootloader.
Click to expand...
Click to collapse
This is why ive posted this thread mate because i dont know if it is higher or equal as i have said there is no firmware version visable i think it should be fine i cant see me having an earlier version than 6.XXXXX

JamieBlues said:
This is why ive posted this thread mate because i dont know if it is higher or equal as i have said there is no firmware version visable i think it should be fine i cant see me having an earlier version than 6.XXXXX
Click to expand...
Click to collapse
you can more or less infer your firmware version, from hboot version:
hboot 1.44 = 1.xx.xxx.x
hboot 1.54 = 2.xx.xxx.x
hboot 1.55 = 3.xx.xxx.x
hboot 1.56 = 4.xx.xxx.x (in some rare cases 5.xx)
hboot 1.57 = 5.xx.xxx.x and 6.xx.xxx.x
however, i would recommend you flash them incrementally, since firmwares are usually extracted from OTAs they expect the previous changes to already have been applied, so depending on the firmware package you intend on using (some of them have been repackaged to include previous changes), you could end up in trouble.
(for example, flashing a 5.xx ota firmware while on 3.xx or lower firmware will result in QHSUSB_DLOAD mode, and you'd have to try [UNBRICK][BETA] HTC Unbricking Project)
so i recommend you flash them incrementally.

nkk71 said:
you can more or less infer your firmware version, from hboot version:
hboot 1.44 = 1.xx.xxx.x
hboot 1.54 = 2.xx.xxx.x
hboot 1.55 = 3.xx.xxx.x
hboot 1.56 = 4.xx.xxx.x (in some rare cases 5.xx)
hboot 1.57 = 5.xx.xxx.x and 6.xx.xxx.x
however, i would recommend you flash them incrementally, since firmwares are usually extracted from OTAs they expect the previous changes to already have been applied, so depending on the firmware package you intend on using (some of them have been repackaged to include previous changes), you could end up in trouble.
(for example, flashing a 5.xx ota firmware while on 3.xx or lower firmware will result in QHSUSB_DLOAD mode, and you'd have to try [UNBRICK][BETA] HTC Unbricking Project)
so i recommend you flash them incrementally.
Click to expand...
Click to collapse
OK Thanks for the advice still i dont know what firmware it is even if it is 2.XXXXX because im on Hboot 1.54 but i geuss i could start with just one increment up from the lowest 2.XXXXX version only thing is im paranoid about attempting to flash an older firmware and it mess up the phone.
Again a big thanks to everyone who has replied.

JamieBlues said:
OK Thanks for the advice still i dont know what firmware it is even if it is 2.XXXXX because im on Hboot 1.54 but i geuss i could start with just one increment up from the lowest 2.XXXXX version only thing is im paranoid about attempting to flash an older firmware and it mess up the phone.
Again a big thanks to everyone who has replied.
Click to expand...
Click to collapse
are you s-off? then you can flash unsigned firmware, and you can go straight to 3.62.401.1
i personally use these: http://forum.xda-developers.com/showthread.php?t=2365506
(in that thread, even the 6.09.401.5 firmware has all the previous files included so it should be safe to go directly to 6.09, but i personally prefer incremental, just in case)
can you post a "fastboot getvar al"l (excluding IMEI and s/n)
PS: the real problem was for people with 3.xx firmware or lower going to 5.xx firmware (from OTA) which was missing SBL3 from 4.xx (another Secondary Bootloader), which would cause the device to go into QHSUSB_DLOAD

nkk71 said:
are you s-off? then you can flash unsigned firmware, and you can go straight to 3.62.401.1
i personally use these: http://forum.xda-developers.com/showthread.php?t=2365506
(in that thread, even the 6.09.401.5 firmware has all the previous files included so it should be safe to go directly to 6.09, but i personally prefer incremental, just in case)
can you post a "fastboot getvar al"l (excluding IMEI and s/n)
PS: the real problem was for people with 3.xx firmware or lower going to 5.xx firmware (from OTA) which was missing SBL3 from 4.xx (another Secondary Bootloader), which would cause the device to go into QHSUSB_DLOAD
Click to expand...
Click to collapse
Yes i am S-OFF and here is my 'getvar all'
D:\Jay's Data\Android\Fastboot>adb reboot bootloader
D:\Jay's Data\Android\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.5555
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXX
(bootloader) imei: XXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3791mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s

JamieBlues said:
Yes i am S-OFF and here is my 'getvar all'
D:\Jay's Data\Android\Fastboot>adb reboot bootloader
D:\Jay's Data\Android\Fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.5555
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
all: Done!
finished. total time: 0.069s
Click to expand...
Click to collapse
fyi, looks like you have a rumrunner/firewater ENG hboot in there, that will be gone once you update, you'll be back on normal hboot.
I would personally flash the following versions incrementally from vomers thread
- 3.62.401.1
- 4.19.401.8
- 4.19.401.11
- 5.11.401.10
- 6.09.401.5
(there is some redundancy doing this since the versions from 4.19.401.11 upwards, vomer has included all previous updates too, but better safe than sorry)

nkk71 said:
fyi, looks like you have a rumrunner/firewater ENG hboot in there, that will be gone once you update, you'll be back on normal hboot.
I would personally flash the following versions incrementally from vomers thread
- 3.62.401.1
- 4.19.401.8
- 4.19.401.11
- 5.11.401.10
- 6.09.401.5
(there is some redundancy doing this since the versions from 4.19.401.11 upwards, vomer has included all previous updates too, but better safe than sorry)
Click to expand...
Click to collapse
Thank you so much for all your help i successfully flashed all firmwares incrementally and the phone does feel alot more snappy :laugh:

[Q&A] [HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red w

[Q&A] [HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red w
Q&A for [HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

After flashing the latest firmware I get a black screen after the white bootscreen with HTC logo... please help. (I still can access to bootloader and recovery)

Lost on all this hboot and firmware discussion for HTC ONE M7
I have a sprint M7, rooted, S-on, running viper rom on it now 4.4.2.
using one of the posts from near the bottom of a thread regarding HTC firmwares, i will paste the data and ask my questions, perhaps one of you guru's can explain this better to me. my comments are Italicized. original comments are BOLD
I made a modified HBOOT for latest firmware - no red warning !
is 'red warning' actually the 'pink wording of "unlocked" i see in the bootloader
made after hboot 1.57.0000 for M7 6.09.401.10
i have hboot 1.57 and i know this created difficulties getting s-off. but i am confused on previous attempts to get S-off on 1.57.
i do not see anything about the "6.09.xxx.xx" in my phone information. i dont see anything even close to a firmware info section other than 4.4.2. where do i find that info? i am trying to update to viper rom 4.4.3 but i need to 'have latest firmware' in order to do so, but i cant figure out which one i have and which one to move up to. for some reason my phone is showing as M7_wls. shouldnt i be M7_spr or whatever the sprint variant is?
Instructions :
Flash from bootloader :
fastboot oem rebootRUU
what the hell is RUU??
fastboot flash zip hboot_1.57.0000_M7_6.09.401.10 - no red.zip
again, how do i find which version i have
fastboot reboot-bootloader
fastboot reboot
Enjoy !
i understand the instructions, familiar with bootloader commands and fastboot

Is 6.06.401.1 the latest firmware?
Is it the latest firmware? Do you keep track of new ones being released?
Thanks!

having issues with alot of roms.
I have what I think is a Sprint m7 HTC one, I have TWRP I believe is the latest version I have the bootloader which shows
tampered
unlocked
m7_wls PVT SHIP s-on RH
hboot-1.44.000
radio 1.00.20.0315
openDSP v26.120.274.0202
eMMC-boot
march 18 2013 18:47:36-1
is this old? Bad version for my sprint phone? right now I have the Gummy rom installed and it just randomly reboots by itself .... I have had issues with several roms. im just trying to find one that is smooth, reliable, that messaging camera.. etc all works
getting rid of the red warning at the bottom of bootloader would be great. but all firmware updates I see say careful if you have sprint phone. what can u guys help me with.?
is my issue that im s-on? if so how do I fix that? feeling like a noob. I like the Viper roms have used them on several phones with no problems ... anything you guys can help with would be greatly appreciated?

Good day everyone,
I have a M7 bought in AT&T (Cingular) USA, I have rooted, unlocked, CID 11111111 and got s-off, but I would like to change to Unlocked/Developer version, so my question are:
should I flash with "Firmware 5.11.1540.9, NO Red Warning" and then run the oficial RUU "6.07.1540.2"?
or what steps do I have to do to get .1540.?
What difference are between Unlocked/Developer (1540) with WWE (401)?
I get this info from the M7:
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4T.20.3218.13
version-cpld: None
version-microp: None
version-main: 3.17.502.3
version-misc: PVT SHIP S-OFF
serialno: HT3XXXXXXXXX
imei: XXXXXXXXXXXXXXX
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4192mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-a85199f7
hbootpreupdate: 11
gencheckpt: 0
Thanks guys

ingmsd said:
Good day everyone,
I have a M7 bought in AT&T (Cingular) USA, I have rooted, unlocked, CID 11111111 and got s-off, but I would like to change to Unlocked/Developer version, so my question are:
should I flash with "Firmware 5.11.1540.9, NO Red Warning" and then run the oficial RUU "6.07.1540.2"?
or what steps do I have to do to get .1540.?
What difference are between Unlocked/Developer (1540) with WWE (401)?
I get this info from the M7:
version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4T.20.3218.13
version-cpld: None
version-microp: None
version-main: 3.17.502.3
version-misc: PVT SHIP S-OFF
serialno: HT3XXXXXXXXX
imei: XXXXXXXXXXXXXXX
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4192mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-a85199f7
hbootpreupdate: 11
gencheckpt: 0
Thanks guys
Click to expand...
Click to collapse
Both the Int'l and DevEd get their updates directly from HTC. For you to change to the Int'l you will have to change your MID as well as your CID. Here are the steps:
Here are the steps to re-branding your phone to DevEd:​
Unlock bootloader if not unlocked already!
Install Custom recovery
Download TWRP 2.6.3.3 from here: http://techerrata.com/browse/twrp2/m7
Achieve S-OFF
With your hboot 1.5x use rumrunner or firewater to get S-Off: http://firewater-soff.com/ or http://rumrunner.us/
Try all options!
Change CID to the new code:
Code:
[B][I]adb reboot bootloader
fastboot oem writecid BS_US001[/I][/B] <- (CID is exactly 8 characters)
[B][I]fastboot reboot-bootloader[/I][/B]
Execute RUU_4.19.1540.9.exe which now matches your CID & MID
There is no need to lock/relock bootloader with S-OFF, and do not even THINK about going back to S-ON!!!
Now you can receive the OTAs or flash them manually.
OTA 5.11.1540.9 - 4.19.1540.9
OTA 6.07.1540.1 - 5.11.1540.9
RUU 6.07.1540.2
Click to expand...
Click to collapse

upgrading firmware
I've been successful upgrading my m7 firmware (thank you) but afterwards I can receive texts n calls but cannot send either out. I tried manually entering APN setting (Verizon) with no luck. Any suggestions?

Cannot update firmware
Hi!
I tried downloading several firmware zips but none works for me. I keep getting the android_info error. The bootloader is unlocked, i've rooted the phone, tried everything but it just wont work. I really need to update my phone coz it's still in Jellybean. I don't get OTA updates too.
Here's my phone details:
Model: HTC ONE M7
MID: PN0714000
CID: HTC_622
Android Version: 4.3
Sense 5.5
Software number: 3.62.401.1
HTC SDK API Level: 5.65
Can anyone point me to the right firmware zip for the above details? I can't install the new versions without updating my firmware.
Please help!

Flashing different Cid RUU

Hi
Apologies in advance if this is an obvious question; I have looked through the forum but cant find a concise answer to my queries. I am coming from a HOX and my friend gave me his broken screened UK O2 branded LTE M7 as such not yet familiar with the M7. I have replaced the broken screen and fitted a new battery which was a great deal more awkward than working on the HOX!
The CId is 02_001 running HBOOT 1.61 and S-ON, I have unlocked the bootloader via HTC Dev however this is where I become unsure as to what avenues I can explore for flashing.
I'm assuming as I've now unlocked the bootloader I can flash a TWRP recovery but as I'm S-ON I can only flash unencrypted roms and as such cannot flash say the HTC Europe unbranded RUU? I want to try and stay on a stock type unbranded Sense ROM if possible rather than flashing a custom or CM based ROM until I am more familiar with the M7.
There is a plethora of info and hence I'm finding it difficult to get to grips with what ROMs would be suitable.

alangordon73 said:
Hi
Apologies in advance if this is an obvious question; I have looked through the forum but cant find a concise answer to my queries. I am coming from a HOX and my friend gave me his broken screened UK O2 branded LTE M7 as such not yet familiar with the M7. I have replaced the broken screen and fitted a new battery which was a great deal more awkward than working on the HOX!
The CId is 02_001 running HBOOT 1.61 and S-ON, I have unlocked the bootloader via HTC Dev however this is where I become unsure as to what avenues I can explore for flashing.
I'm assuming as I've now unlocked the bootloader I can flash a TWRP recovery but as I'm S-ON I can only flash unencrypted roms and as such cannot flash say the HTC Europe unbranded RUU? I want to try and stay on a stock type unbranded Sense ROM if possible rather than flashing a custom or CM based ROM until I am more familiar with the M7.
There is a plethora of info and hence I'm finding it difficult to get to grips with what ROMs would be suitable.
Click to expand...
Click to collapse
With a S-ON phone you can only flash Signed RUU that are for your phone CID, MID and version-main. You also can't flash older RUU than your version-main.
With S-OFF, you can flash Signed/Un-signed RUU of your choice (you'll have to change your CID and maybe your MID)
Flashing a stock rom (not talking about a RUU here, but a stockish unbranded custom rom) doesn't requires S-OFF, simply flash using custom recovery. ARHD 93 is a good starting point imo.

Many thanks for the reply - I am aware that the question is slightly noobish and as such I am appreciative. I'll install the suggested ROM and work from there.
Again many thanks

Unable to entery custom recovery
okay this is less than ideal... flashed every type of custom recovery to no avail but unable to boot into recovery.
Tried fastboot erase cache before and after flashing recoveries.
When selecting recovery 'entering recovery' appears at the top of the screen, after a few seconds the screen goes black for a second or so then back to the 'entering recovery' which never actually happens - Its like it hangs on loading the recovery.
Result of fastboot allvars query:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.206.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C6W904988
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4047mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-868a9c98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Does anyone have any ideas?
This phone/brick is vexing to say the least!

alangordon73 said:
okay this is less than ideal... flashed every type of custom recovery to no avail but unable to boot into recovery.
Tried fastboot erase cache before and after flashing recoveries.
When selecting recovery 'entering recovery' appears at the top of the screen, after a few seconds the screen goes black for a second or so then back to the 'entering recovery' which never actually happens - Its like it hangs on loading the recovery.
Result of fastboot allvars query:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.206.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C6W904988
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4047mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-868a9c98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Does anyone have any ideas?
This phone/brick is vexing to say the least!
Click to expand...
Click to collapse
Flash mdmower's twrp recovery
http://android.cmphys.com/twrp-m7/

Right it seems I've managed to make a mess of this - I've foolishly relocked the booloader on a custom recovery and now I can't get it unlocked again - It reboots to recovery and just hangs and wont unlock the bootloader.
I've tried using the rom.zip from the RUU and flashing it in fastboot to which it reports it cannot allocate the space in bytes.
I've tried running the RUU which fails at checking headers on step 1/5
RUU I'm trying to use is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2
Is the recovery partition perhaps corrupt as I'm getting absolutely nowhere with this paperweight?
I'm now at a loss and most peeved!

alangordon73 said:
Right it seems I've managed to make a mess of this - I've foolishly relocked the booloader on a custom recovery and now I can't get it unlocked again - It reboots to recovery and just hangs and wont unlock the bootloader.
I've tried using the rom.zip from the RUU and flashing it in fastboot to which it reports it cannot allocate the space in bytes.
I've tried running the RUU which fails at checking headers on step 1/5
RUU I'm trying to use is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2
Is the recovery partition perhaps corrupt as I'm getting absolutely nowhere with this paperweight?
I'm now at a loss and most peeved!
Click to expand...
Click to collapse
You can't flash a RUU version that is older than your actual version-main when the phone is S-ON. To unlock a bootloader that was relocked with a custom recovery installed, you either need to reflash a signed(official) firmware or a ruu since this is the only thing that the phone will accept in this state (locked and s-on).
Unfortunately i can't find any 7.18.206.51 firmware so you'll have to reflash the whole phone using the 7.18.206.51 RUU which will reset everything back to stock and wipe your files.
https://www.androidfilehost.com/?fid=24352994023702662
Code:
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_O2_UK_7.18.206.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_459056_signed.zip
fastboot reboot-bootloader
than you'll be able to unlock again.
Don't forget to use htc_fastboot.exe for the flash zip command (not the regular fastboot.exe). A quick search on androidfilehost.com for "htc_fastboot" and you'll be able to download it if you don't have it already.

Outstanding... Flashed back and unlocked the boot loader. Spent enough time and frustration this week so early night and will try flash a recovery and ArHD tomorrow.
Can't thank you enough

Grrrr... Flashed the recovery suggested above and the phone just does not want to go into recovery.
I've tried:
Powering down from Android and then going into Bootloader just stops on Entering Recovery.
Power down, entering bootloader then reseting the phone - again stops on Enterng Recovery.
Power down from Android, power back up, master reset - again just stops on entering recovery.
screams...

alangordon73 said:
Grrrr... Flashed the recovery suggested above and the phone just does not want to go into recovery.
I've tried:
Powering down from Android and then going into Bootloader just stops on Entering Recovery.
Power down, entering bootloader then reseting the phone - again stops on Enterng Recovery.
Power down from Android, power back up, master reset - again just stops on entering recovery.
screams...
Click to expand...
Click to collapse
Did you tried the old TWRP 2.6.3.3 version? Ive seen a lot of pple only being able to use this version when newer ones will cause the exact problem you are experiencing. Might worth a try.

Solved! TWRP 2.6.3.3 works.

alray said:
With a S-ON phone you can only flash Signed RUU that are for your phone CID, MID and version-main. You also can't flash older RUU than your version-main.
With S-OFF, you can flash Signed/Un-signed RUU of your choice (you'll have to change your CID and maybe your MID)
Flashing a stock rom (not talking about a RUU here, but a stockish unbranded custom rom) doesn't requires S-OFF, simply flash using custom recovery. ARHD 93 is a good starting point imo.
Click to expand...
Click to collapse
Then I can flash any Ruu I want if I change Cid and Mid to match Ruu with S-off? Even if it's from 4.3 to kit Kat or Lollipop?
Thanks and sorry for hijacking the thread.
Enviado desde mi Nexus 5 mediante Tapatalk

JabboMaster said:
Then I can flash any Ruu I want if I change Cid and Mid to match Ruu with S-off? Even if it's from 4.3 to kit Kat or Lollipop?
Thanks and sorry for hijacking the thread.
Enviado desde mi Nexus 5 mediante Tapatalk
Click to expand...
Click to collapse
not exactly,it depend what phone variant you have. If its a M7_UL or M7_U then you can flash any M7_UL or M7_U RUU youd like by changing the CID and MID. If you want to flash a lollipop RUU you need to have at least hboot 1.57 with a 6.xx.xxx.x firmware already installed on the phone. Firmware can easily be updated if needed when s-off.

alray said:
not exactly,it depend what phone variant you have. If its a M7_UL or M7_U then you can flash any M7_UL or M7_U RUU youd like by changing the CID and MID. If you want to flash a lollipop RUU you need to have at least hboot 1.57 with a 6.xx.xxx.x firmware already installed on the phone. Firmware can easily be updated if needed when s-off.
Click to expand...
Click to collapse
Ok, thanks.
Gonna try flashing first a Kitkat Ruu and then updating via Ota to Lollipop.
Enviado desde mi Nexus 5 mediante Tapatalk