Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Think this is it > http://www.multiupload.com/4N0NMBO0WE
stluciasound said:
Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Click to expand...
Click to collapse
Here is:
http://rapidshare.com/files/415962748/s1_odin_20100513.pit
You guys are god! thx!
what is the diffrence between 512 anf 513 pit files.. I flashed JP3 with 512 was I correct or should I have used 513
if its working then dont worry m8
if you use the same pit file all the time you dont hav to repartition when you change pit file you repartition
regards
Just use 512 for everything.. 513 doesn't seem to work for late builds
513 doesn't work, but it's still good to have around.
I wanted to flash JM1 and, for some reason, odin wasn't flashing it, no matter what. I tried ticking the "re-partition" option (with 512.pit) and odin was just waiting there, never actually re-partitioning the phone.
So I flashed the firmware with 513.pit (which obviously didn't work, but odin re-partitioned). Then, I re-flashed with 512.pit this time and odin re-partitioned it properly.
Always good to have alternatives laying around.
I would be very grateful for some assistance with this, after trying many firmwares with Odin (most now blocked because of Knox bootloader), custom recovery etc. etc.
Basically I want to downgrade my I9305 from 4.4.4 to 4.1.1 so that I can use the 'trick' for SIM unlocking the device. This is after finding out that GalaxSim Unlock can't be used with this device, which I tried after rooting under 4.4.4.
I have a 4.1.1 firmware on the way which I can flash with Odin, but I'm conscious that each time I do this since upgrading to 4.3/4.4.4 the Knox bootloader comes up with 'Unsupported version'.
Is it possible for me to copy the boot.img file from the 4.4.4 firmware package and replace the boot.img file in the 4.1.1 package? Will that work? I don't really understand the ins and outs of this yet and it's getting very frustrating when I can't find any answers on Google to these specific questions.
If the above doesn't work, what option do I have to downgrade to stock 4.1.1?
Many thanks for your help.
http://forum.xda-developers.com/galaxy-s3/help-i9305/noob-help-custom-rom-unlocking-t2782118 -here you have a mini tutorial how to make it.
viktorak said:
http://forum.xda-developers.com/galaxy-s3/help-i9305/noob-help-custom-rom-unlocking-t2782118 -here you have a mini tutorial how to make it.
Click to expand...
Click to collapse
Thank you so much for this; I got excited that it might finally be a solution but alas, when I try to install the ROM in CWM recovery (6.0.4.7) I get the following message:
format() expects 5 args, got 4
E:Error in /data/media/0/stock411.zip (I renamed it and copied it again to internal phone storage in case it was a bad transfer to ext SD card previously)
(Status 7)
Installation aborted.
A quick search suggests a bad download perhaps? Will try again in 5m (when the re-download completes) but if that fails I'm back to square one.
Do you think it'd be possible to flash another stock firmware in this manner? If you flash from CWM does it never affect the bootloader/Knox? Or is this error message coming from a Knox-type block, do you think?
Thanks for your input.
Update
Late last night I somehow managed to flash a stock 4.1.1 ROM from a rather messed up 4.4.4 (following CWM recovery backup restore [apps were 'stopping' left right and centre making the phone unusable, even after wiping cache and delvik cache]). This enabled me to do the dialler trick and remove the SIM lock.
Today I've tried 3 different 4.1.2 ROMs and all fail with SW Rev. Invalid Magic String (or something similar) using Odin. After the first failed attempt I thought ok, I'll go back to 4.1.1; however when I tried this the phone got stuck on the first Samsung I9305 boot screen and, oddly, I couldn't get into recovery mode - the only option was download mode. I resolved this by flashing 4.3 (which fails with Device 3, Binary 2 or some such message. After that failure though, flashing 4.1.1 works and got my phone back to where it was before.
This is all rather confusing but I assume the 4.1.1 ROM doesn't come with recovery/boot images and requires these from a failed 4.3 flash, or something like that.
Anyway, I guess the upshot is: there's a specific 4.1.1 ROM out there for I9305 which works through Odin despite Knox bootloader being installed on your phone. It's on TSAR3000.com (I can't post links yet 'cause I'm new, but you can find it through Google if you look hard enough).
Any feedback on the above behaviour encountered during my first foray into the land of rooting, flashing and SIM unlocking that may help me/others understand what's actually going on behind the scenes would be much appreciated!
Thanks.
Clapfish said:
Late last night I somehow managed to flash a stock 4.1.1 ROM from a rather messed up 4.4.4 (following CWM recovery backup restore [apps were 'stopping' left right and centre making the phone unusable, even after wiping cache and delvik cache]). This enabled me to do the dialler trick and remove the SIM lock.
Today I've tried 3 different 4.1.2 ROMs and all fail with SW Rev. Invalid Magic String (or something similar) using Odin. After the first failed attempt I thought ok, I'll go back to 4.1.1; however when I tried this the phone got stuck on the first Samsung I9305 boot screen and, oddly, I couldn't get into recovery mode - the only option was download mode. I resolved this by flashing 4.3 (which fails with Device 3, Binary 2 or some such message. After that failure though, flashing 4.1.1 works and got my phone back to where it was before.
This is all rather confusing but I assume the 4.1.1 ROM doesn't come with recovery/boot images and requires these from a failed 4.3 flash, or something like that.
Anyway, I guess the upshot is: there's a specific 4.1.1 ROM out there for I9305 which works through Odin despite Knox bootloader being installed on your phone. It's on TSAR3000.com (I can't post links yet 'cause I'm new, but you can find it through Google if you look hard enough).
Any feedback on the above behaviour encountered during my first foray into the land of rooting, flashing and SIM unlocking that may help me/others understand what's actually going on behind the scenes would be much appreciated!
Thanks.
Click to expand...
Click to collapse
Can you tell me the country? i will download it myself
Clapfish said:
I would be very grateful for some assistance with this, after trying many firmwares with Odin (most now blocked because of Knox bootloader), custom recovery etc. etc.
Basically I want to downgrade my I9305 from 4.4.4 to 4.1.1 so that I can use the 'trick' for SIM unlocking the device. This is after finding out that GalaxSim Unlock can't be used with this device, which I tried after rooting under 4.4.4.
I have a 4.1.1 firmware on the way which I can flash with Odin, but I'm conscious that each time I do this since upgrading to 4.3/4.4.4 the Knox bootloader comes up with 'Unsupported version'.
Is it possible for me to copy the boot.img file from the 4.4.4 firmware package and replace the boot.img file in the 4.1.1 package? Will that work? I don't really understand the ins and outs of this yet and it's getting very frustrating when I can't find any answers on Google to these specific questions.
If the above doesn't work, what option do I have to downgrade to stock 4.1.1?
Many thanks for your help.
Click to expand...
Click to collapse
Downgrade is very easy. Extract that tar and then select all files except sboot.bin because sboot is the bootloader which causes downgrade fail then compress them into tar agin using 7zip then flash. First do all this with 4.1.2 firmware then you will be able to downgrade to 4.1.1☺
HELP ME !!!!!!!!
qasim799 said:
Downgrade is very easy. Extract that tar and then select all files except sboot.bin because sboot is the bootloader which causes downgrade fail then compress them into tar agin using 7zip then flash. First do all this with 4.1.2 firmware then you will be able to downgrade to 4.1.1
Click to expand...
Click to collapse
hello, sorry but I did not understand. I have a CM11 (4.4.4) You can explain me in detail the procedure? (for example with screenshot)
Thanks a lot, I'm sorry but I'm new ...:crying:
negher80 said:
hello, sorry but I did not understand. I have a CM11 (4.4.4) You can explain me in detail the procedure? (for example with screenshot)
Thanks a lot, I'm sorry but I'm new ...:crying:
Click to expand...
Click to collapse
ok
first when you download the zip fie the firmware from sammobile , extract it using 7zip you will get a tar file also extract it using 7zip you will get many files like boot.img ,syste.img,tz.img and cache.img etc. now you have to select all files except sboot.bin because this file causes problem in downgrading it is bootloader, now select all files and left click and go in 7zip option click add to acheieve then select tar and tap ok.now it will compress it into tar file flash this file with odin put your phone into download mode by holding volume down +home+poweron button you will see download mode press volume up to continue ,download odin 3.9 from google select that tar in AP option install samsung usb drivers first then connection ct with usb cable now you will see id com connected in odin click flash and wait untill it get's finished after perform factory reset.
qasim799 said:
ok
first when you download the zip fie the firmware from sammobile , extract it using 7zip you will get a tar file also extract it using 7zip you will get many files like boot.img ,syste.img,tz.img and cache.img etc. now you have to select all files except sboot.bin because this file causes problem in downgrading it is bootloader, now select all files and left click and go in 7zip option click add to acheieve then select tar and tap ok.now it will compress it into tar file flash this file with odin put your phone into download mode by holding volume down +home+poweron button you will see download mode press volume up to continue ,download odin 3.9 from google select that tar in AP option install samsung usb drivers first then connection ct with usb cable now you will see id com connected in odin click flash and wait untill it get's finished after perform factory reset.
Click to expand...
Click to collapse
Ok qasim, sorry, this Modification is Necessary on the firmware 4.1.1? thanks!
negher80 said:
Ok qasim, sorry, this Modification is Necessary on the firmware 4.1.1? thanks!
Click to expand...
Click to collapse
i have open the file of 4,4 KK firmware.(see enclosed picture).
and now??
negher80 said:
i have open the file of 4,4 KK firmware.(see enclosed picture).
and now??
Click to expand...
Click to collapse
Now select all files except sboot.bin and compress into tar file by using green + button or left click options and the flash with odin google it how to flash with odin there many detailed guides available.
And I don't know that sboot.bin is in 4.1.1 firmware you can check by extracting that tar of 4.1.1 as you done with 4.4 file if any sboot.bin is there remove it and compress all remaining fies into tar again and flash.
PERFECT!!!!!!!!!
qasim799 said:
Now select all files except sboot.bin and compress into tar file by using green + button or left click options and the flash with odin google it how to flash with odin there many detailed guides available.
And I don't know that sboot.bin is in 4.1.1 firmware you can check by extracting that tar of 4.1.1 as you done with 4.4 file if any sboot.bin is there remove it and compress all remaining fies into tar again and flash.
Click to expand...
Click to collapse
Perfect qasim!
it's alright! with your post i have downgraded my i 9305 from 4,4 to 4,1 and with another guide i have removed the simlock!
thanks a lot!!
PERFECT!!!!!
qasim799 said:
Now select all files except sboot.bin and compress into tar file by using green + button or left click options and the flash with odin google it how to flash with odin there many detailed guides available.
And I don't know that sboot.bin is in 4.1.1 firmware you can check by extracting that tar of 4.1.1 as you done with 4.4 file if any sboot.bin is there remove it and compress all remaining fies into tar again and flash.
Click to expand...
Click to collapse
Perfect qasim!
i have used your guide for downgrade from 4.4.4 to 4.1.1.
after, i have removed the sim lock ( tutorial from youtube) and finally, i have mounted the 4,4,4 kitkat without the sim lock!
thanks a lot for your help!
:good:
hello mates, can you upload the rom that you sucessfully flashed to 4.1.1? thanks
Please Help me i have I9305 4.4.4 i want to downgrade also
Please Help me i have I9305 4.4.4 i want to downgrade and i have 4.1.2 firmware over here and i also do that procedure you said but im stuck at nand write start. any help please
Unable to downgrade from 4.4.4
Tried to follow the tutorial but failed.
I have an I9305 with KitKat 4.4.4 that I would like to downgrade to do the Sim unlock trick.
I downloaded I9305XXUENH1_I9305EVRENH1_EVR.zip from Sam Mobile (thats 4.3 for the I9305)
I extracted the files removed sboot.bin and compressed the files to I9305XXUENH1_I9305EVRENH1_I9305XXUENG1_HOME.tar
I then flashed that file with odin but got the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have now flashed 4.4.4 and the phone is working again.
Anybody help?
Clapfish said:
I would be very grateful for some assistance with this, after trying many firmwares with Odin (most now blocked because of Knox bootloader), custom recovery etc. etc.
Basically I want to downgrade my I9305 from 4.4.4 to 4.1.1 so that I can use the 'trick' for SIM unlocking the device. This is after finding out that GalaxSim Unlock can't be used with this device, which I tried after rooting under 4.4.4.
I have a 4.1.1 firmware on the way which I can flash with Odin, but I'm conscious that each time I do this since upgrading to 4.3/4.4.4 the Knox bootloader comes up with 'Unsupported version'.
Is it possible for me to copy the boot.img file from the 4.4.4 firmware package and replace the boot.img file in the 4.1.1 package? Will that work? I don't really understand the ins and outs of this yet and it's getting very frustrating when I can't find any answers on Google to these specific questions.
If the above doesn't work, what option do I have to downgrade to stock 4.1.1?
Many thanks for your help.
Click to expand...
Click to collapse
Delete sboot and flash by odin
Use this thread to delete sboot
http://forum.xda-developers.com/android/general/how-to-create-tar-to-md5-tar-t3204511#post63427287
thanks, great job !
Thank you very much for your help installing custom 4.1.1. from 4.4.4. and then sim unlock !!!!!
The method works very fine for official 4.4.4 i9305 phone !
Thanks a lot to spanish guys, I used their 4.1.1. custom rom.
I struggled long time with this sim unlock problem as I was with UK EE network.
Now my phone is free !
Stuck at Samsung logo after flashing 4.1.1 on
I cant get past the samsung logo after flashing the following file:
Product Code: GT-I9305TADEVR (4.1.2) (EE UK)
PDA: XXBMD5
PHONE: XXBMD5
CSC: EVRBLL2
Link: Download (Dev-Host)
Click to expand...
Click to collapse
found on this thread by lyriquidperfection following qasim's suggestion to remove sboot.bin on top of I9305XXUFNI3_I9305DBTFNI3_DBT.zip which is a 4.4.4 stock rom. I have unzipped the tar file, removed sboot.bin, rezipped with 7zip as tar, then used ihsas's script to convert that to tar.md5 and flashed with odin, and stuck at the white logo screen. What is wrong here i am doing? I also need to unlock my carrier
JFV93 said:
hello mates, can you upload the rom that you sucessfully flashed to 4.1.1? thanks
Click to expand...
Click to collapse
You'll find it on sammobilehttp://www.sammobile.com/firmwares/database/GT-I9305/EVR/
Hey guys, so I used a ROM, it went buggy, reinstalled the phone with ODIN, put android 4.1.2 on it, rooted it, installed CoCore on it, tried to install a ROM on it again, but it gave an error. Now I don't know what the error itself was anymore, but I did find back than that having a PIT file might solve the problem. (And I don't feel like reproducing the error again, because the first time I got the error I had to reinstall everything with ODIN again, however not the second time).
So does someone know where I could find the PIT file for the stock firmware which runs Android 4.1.2 (for The Netherlands, non T-mobile)?
Here you go 1
be careful when using PIT file ,
its only for I9070 , 16 GB , PIT FILE ,
i am not responsible if you damage your phone so please, just read instructions when flashing PIT .
also , the stock rom`s include PIT files already ,
or what i what i heard.
HOPE IT HELPS
Ok so I have a note 4 that was not working properly as it would boot into Odin mode when I tried to turn it on. That being said, it sometimes would boot normally or not turn on at all. So my solution was to root it and install a custom rom (like cyanogen mod). So I got odin and the twrp file and the custom kernel and followed the steps necessary: flash twrp, flash the kernel, flash super su, etc. But the problem is that Odin says "no pit binary". So I google it and found out that I could repartition it using a stock ROM and the correct pit file. I did that and it failed as well. So I turn to keis and do the firmware and initialization thingy, that ends up failing too. So I go back to odin and try to flash stock firmware but it fails after " writing NAND " thingy or it fails saying "cannot open specified file" or "no pit file ". What can I do.[emoji27]
beelito19 said:
Ok so I have a note 4 that was not working properly as it would boot into Odin mode when I tried to turn it on. That being said, it sometimes would boot normally or not turn on at all. So my solution was to root it and install a custom rom (like cyanogen mod). So I got odin and the twrp file and the custom kernel and followed the steps necessary: flash twrp, flash the kernel, flash super su, etc. But the problem is that Odin says "no pit binary". So I google it and found out that I could repartition it using a stock ROM and the correct pit file. I did that and it failed as well. So I turn to keis and do the firmware and initialization thingy, that ends up failing too. So I go back to odin and try to flash stock firmware but it fails after " writing NAND " thingy or it fails saying "cannot open specified file" or "no pit file ". What can I do.[emoji27]
Click to expand...
Click to collapse
Hey bud. Are you trying to flash a pit file and firmware or just firmware. And is it a N910T and if so on what build of firmware..? Send a screenshot of download mode...and also try to rename the extracted firmware file from .md5 to .tar and try to flash
Its a N910T and its on 5.1.1, i read on another XDA thread that to repartition something you need stock firmware (which I have a 5.1.1 one) and the right pit file (I have the N910T one) and that in odin put the extracted firmware file and on pit put the pit file. I did that and it failed. And how would I rename the file ... Would I just rename it on the file explorer on windows?
noob4598 said:
Hey bud. Are you trying to flash a pit file and firmware or just firmware. And is it a N910T and if so on what build of firmware..? Send a screenshot of download mode...and also try to rename the extracted firmware file from .md5 to .tar and try to flash
Click to expand...
Click to collapse
First it was a pit file and firmware, but now I'm trying to unbrick it by flashing just firmware on odin since keis doesn't seem to help. And yes it is an N910T, dont know the exact build but it is 5.1.1 ( would flashing a different 5.1.1(for the n910t) build matter or not, since its still 5.1.1 ?)
Yea if your on dok2 you can't go back to anything under that. It will fail every time. What firmware build u got
noob4598 said:
Yea if your on dok2 you can't go back to anything under that. It will fail every time. What firmware build u got
Click to expand...
Click to collapse
I dont know... The latest one ( the update for stage fright was the last update I had installed on there. Since it's soft bricked ( the connect to kies message) I can't tell what the exact build was... I just know its a 5.1.1 build.)