Database Develop

HELP !!! My galaxy S is dead

Hello all ....
I was trying to install a new Kernel which does :
Reboot to download: switches to download mode
* Run 2e recovery: Switches to 2e recovery
* Install superuser: installs busybox and superuser to the phone
* Lagfix options: switch between various lagfix schemes
* Tweak options: switch between various startup tweaks
* BLN options: Turns BackLightNotification on or off
* Reset permissions: Resets permissions to the same state as init does
BUT ....
the phone just switched of and star showing me
Mobile phone , PC and a exclamation mark between them.
i tried to access the download mode and reinstall it ... but the kernel stops after about 30% and gets stuck.
Please help me to solve the matter

Have you unticked Repartition and used the Kernel File as the PDA? You need to use the TAR File as the PDA and then flash without Repartition.

[RECOVERY][G800H][qualcomm] [ALPHA-1] TWRP 2.8

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE S5 MINI(G800H) [QCOM MSM8228]
PLEASE BE CAREFUL ... THIS RECOVERY HASNT BEEN TESTED "FULLY"...ONLY WIPE CACHE AND DALVIK CACHE , INSTALL ZIP IS TESTED
PLEASE BACKUP YOUR DATA AND MAKE SURE YOU HAVE A BACKUP OF THE FIRMWARE BEFORE PROCEEDING..HAPPY FLASHING!
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy S5 Minilogo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
DATA SHOWN TWICE IN ADVANCED WIPE ... WILL BE FIXED IN THE NEXT BUILD
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
A BIG THANKS TO @RGold55 FOR TESTING

reserved

:victory:
Thanks for the mention, you're most welcome, bro!

Thank you very much. Let me confirm if it is for g800h dual sim phone.

My G800H/DS works fine with both sim cards -- sim manager, sms, calls, everything is ok.

"-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it"
In step 3 how to select the recovery file?
I see PDA button. How to select AP. where is it in odin?

drnag said:
"-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it"
In step 3 how to select the recovery file?
I see PDA button. How to select AP. where is it in odin?
Click to expand...
Click to collapse
it depends on the version of odin your using
if your odin has PDA .. then put the recovery there (v 3.07 and before )
if your odin has AP ... Then put the recovery there (v3.09 onwards of odin)

Thank you very much. Done.
cheers

...

Tested
Zip flash ok.

Have a problem... i cannot upgrade my phone to new firmare:
Model: SM-G800F
Model name: GALAXY S5 mini
Country: Italy
Version: Android 4.4.2
Changelist: 1998311
Build date: Fri, 10 Oct 2014 02:45:33 +0000
Product Code: ITV
PDA: G800FXXU1ANJ2
CSC: G800FITV1ANJ1
MODEM: G800FXXU1ANJ2
...after upgrade phone reboot, go into recovery and stopped procedure ?...
In which i can solve it ?
Thnak
Hispa

hispanico957 said:
Have a problem... i cannot upgrade my phone to new firmare:
Model: SM-G800F
Model name: GALAXY S5 mini
Country: Italy
Version: Android 4.4.2
Changelist: 1998311
Build date: Fri, 10 Oct 2014 02:45:33 +0000
Product Code: ITV
PDA: G800FXXU1ANJ2
CSC: G800FITV1ANJ1
MODEM: G800FXXU1ANJ2
...after upgrade phone reboot, go into recovery and stopped procedure ?...
In which i can solve it ?
Thnak
Hispa
Click to expand...
Click to collapse
why did you flash this one??? This is for the G800H .. yours is G800F

G800F:
http://forum.xda-developers.com/showthread.php?t=2922938
Sent from my SM-G800H/DS

can anyone reup the file? it is not longer available on basketbuild.com
Thanks!

mindestens said:
can anyone reup the file? it is not longer available on basketbuild.com
Thanks!
Click to expand...
Click to collapse
I have no clue how the file disappeared but I'll upload it again .. Wen I'm back from college

rutvikrvr said:
I have no clue how the file disappeared but I'll upload it again .. Wen I'm back from college
Click to expand...
Click to collapse
Thank you! Flashed now and works perfect!

Works fine on my G800H/DS. It wont write to the external SD (64GB eXFat) but otherwise it works like a champ.

hello rutvikrvr,
2 short questions.. is it possible to adjust the time settings for different time zones (eg +1 for europe / vienna) ?
If i make a backup to the internal sd i cannot see any content in the TWRP folder with eg. es file explorer, only when i boot with recovery and use the present file manager.. is it a bug or intention?
Thanks!

mindestens said:
hello rutvikrvr,
2 short questions.. is it possible to adjust the time settings for different time zones (eg +1 for europe / vienna) ?
If i make a backup to the internal sd i cannot see any content in the TWRP folder with eg. es file explorer, only when i boot with recovery and use the present file manager.. is it a bug or intention?
Thanks!
Click to expand...
Click to collapse
In advanced settings you should get an option to change the time zone.... And for the second thing... If es file explorer doesn't support reading .ext4 files .. Then it won't show up

rutvikrvr said:
In advanced settings you should get an option to change the time zone.... And for the second thing... If es file explorer doesn't support reading .ext4 files .. Then it won't show up
Click to expand...
Click to collapse
Yes, i found this setting - BUT if I set the time zone to UTC +1 (Berlin, Brussels, Paris) - the correct time zone for vienna too - the time is shown as 8:43 pm - but it is now 7:43 pm - so i think the winter / summertime is not considered?
The second thing.. in the TWRP folder it is a folder called backup and in this also a folder.. if i copy the whole TWRP Folder with the file manager from the recovery to the external sd - i CAN see the whole content from the TWRP folder with ES File Explorer .. on the internal sd not.. Strange

[How to] Change CSC code for G900H

Please note that I held no responsibility if you damage your phone, brick it or anything! This was made based on my own experience.
Hi, just thought I share my experience in changing CSC code. Initially I purchased my S5 with XSE (Indonesian) CSC code. Not having the patient for lollipop, I flashed Kazakhastan ROM and my CSC code changed to SKZ. After several months, samsung decided to release lollipop for XSE region and I flashed to it but was stuck with XXV (Vietnam). Not sure what happened but it seems that it takes the first code in the multi-CSC rom. Anyway this had me frustrated for a couple of months. So without further ado, here is the steps:
1. Download requirements:
-Download the BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5 (must be this ROM - this rom allows change CSC code without root)
-Download your country ROM (for my example is G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5)
-Download and install Cygwin - or any app which can modify .tar files, but lets use Cygwin for this case
-Download and install Odin 3.09 or higher (to flash ROMs)
2. Flash the indian ROM (G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5) to your device
3. While waiting for the ROM to flash, open your country rom, remove .md5 at the end so the name will be from G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5 to G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar
4. Open the G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar with winzip or winrar, extract cache.img and hidder.img and place in home folder of Cygwin
5. Open cygwin and type the following:
tar -H ustar -cf csc.tar cache.img hidden.img
6. Test the indian rom, open dialer and type *#272*your-imei-number# - a selection of CSC should appear meaning that the ROM can change CSC without root
7. Flash in Odin, put the csc.tar in CSC and flash - this will not trip knox - I have tried this myself
8. Boot your phone, open dialer and type *#272*your-imei-number# - from here more codes should appear including the ones included in the csc.tar file
9. Select your country code (in this case I selected XSE) and it will automatically reboot
10. Shut down and check your CSC in bootloader (hold power + up + home) it should be correct now
11. Flash your country rom, clear cache and everything and voila!
Please also note that this guide should work on other devices as long as the device has a rom with *#272*your-imei-number# enabled without root
Hope this helps!

adit said:
Please note that I held no responsibility if you damage your phone, brick it or anything! This was made based on my own experience.
Hi, just thought I share my experience in changing CSC code. Initially I purchased my S5 with XSE (Indonesian) CSC code. Not having the patient for lollipop, I flashed Kazakhastan ROM and my CSC code changed to SKZ. After several months, samsung decided to release lollipop for XSE region and I flashed to it but was stuck with XXV (Vietnam). Not sure what happened but it seems that it takes the first code in the multi-CSC rom. Anyway this had me frustrated for a couple of months. So without further ado, here is the steps:
1. Download requirements:
-Download the BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5 (must be this ROM - this rom allows change CSC code without root)
-Download your country ROM (for my example is G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5)
-Download and install Cygwin - or any app which can modify .tar files, but lets use Cygwin for this case
-Download and install Odin 3.09 or higher (to flash ROMs)
2. Flash the indian ROM (G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5) to your device
3. While waiting for the ROM to flash, open your country rom, remove .md5 at the end so the name will be from G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5 to G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar
4. Open the G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar with winzip or winrar, extract cache.img and hidder.img and place in home folder of Cygwin
5. Open cygwin and type the following:
tar -H ustar -cf csc.tar cache.img hidden.img
6. Test the indian rom, open dialer and type *#272*your-imei-number# - a selection of CSC should appear meaning that the ROM can change CSC without root
7. Flash in Odin, put the csc.tar in CSC and flash - this will not trip knox - I have tried this myself
8. Boot your phone, open dialer and type *#272*your-imei-number# - from here more codes should appear including the ones included in the csc.tar file
9. Select your country code (in this case I selected XSE) and it will automatically reboot
10. Shut down and check your CSC in bootloader (hold power + up + home) it should be correct now
11. Flash your country rom, clear cache and everything and voila!
Please also note that this guide should work on other devices as long as the device has a rom with *#272*your-imei-number# enabled without root
Hope this helps!
Click to expand...
Click to collapse
will try this gan, not increase knox right?
hope it works.
Terima kasih..

noez92 said:
will try this gan, not increase knox right?
hope it works.
Terima kasih..
Click to expand...
Click to collapse
Knox remains 0x0 gan dijamin aman

adit said:
Knox remains 0x0 gan dijamin aman
Click to expand...
Click to collapse
so frustating to see XXV, festive effect, tiengviet lang :laugh:
---------- Post added at 12:37 AM ---------- Previous post was at 12:34 AM ----------
can you help for process in CYGWIN? because it says no directory
nvm, already do it in another directory.

omg!
i can confirm this method works on my G900H.
Nice job gan.
Thanks banyak...

Need available csc code for sgh-t889 on v4.3
How do i get the available csc code coz someone told me its what cozing my network &b data problems

Which ROM are you on? Does *#272*imei work?

Am on stock rom 4.3 & that code doesnt work on it

AFAIK, the only rom with working CSC change is BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar .md5

That ROM is for S5 & mine is a Note 2

Please see the title and the forum, this is an S5 forum, better luck looking at note 2 forum.

adit said:
Please see the title and the forum, this is an S5 forum, better luck looking at note 2 forum.
Click to expand...
Click to collapse
Where we get this rom? Can you please give the link??

[ROM][STABLE][SM-A520X][AXES ROM v1][DEODEX/ROOT/XPOSED/BUSYBOX & MORE!]

Code:
/*
* Your warranty is now void.
*
* We (The AXES Team) are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, We will laugh at you.
*/
AXES Rom as in: "AlexsaderXxvirusElazarSystem", is a Stock Touchwiz Marshmallow Rom based on the A520FXXU1AQC3 firmware for the Samsung Galaxy A5 2017 Smartphone which is compatible with the following Model Numbers:
A520F (Europe, Global Single-SIM)
A520F/DS (Global Dual-SIM)
A520K/L/S (South Korea)
A520W (Canada)
FEATURES:
1- February 2017 Security Patch
2- Pre-rooted
3- Xposed Framework Pre-installed
4- XTouchWiz Xposed Module Pre-installed
5- Busybox Pre-installed
6- Samsung's Good Lock UI applied
7- Galaxy S8 Touchwiz Launcher set as the default launcher
8- Nova Launcher available as well
9- Multiple User Accounts (Main, Guest)
10- Advanced Reboot Menu
11- Pop-up View Gestures
12- Samsung Galaxy Note 7 Apps Edge
13- build.prop Tweaks
14- Viper4Android v2.3.4.0 (Make sure to use the: "Compatible Mode" option in the Viper app since we've inserted another sound mod)
For more info you can check out VIPER'S Audio Website here:
http://vipersaudio.com/blog/?page_id=127
And the Official Xda Thread here:
https://forum.xda-developers.com/showthread.php?t=2191223
15- eXtremeBeats Aural Maximizer 2™ Audio Mod
For more info you can check out the Official Xda Thread of eXtremeBeats here:
https://forum.xda-developers.com/showthread.php?t=2634729
16- S Health Available & Working
17- Knox removed
18- Comes in a 1.4 GB of Size Package
CREDITS:
@alexsaderxda ---> He's Rom as base for AXES Rom and he's help in the Development Area
@XxViRUsPRO ---> Lead Developer/Main Developer
@LorDElazAR ---> Ideas for the Rom and the Creator of this Thread along with it's Text
SPECIAL THANKS:
@samsung for their Firmware & Good Lock UI
@SuperR. for he's Linux Kitchen
@JustArchi for he's ArchiKitchen
@rovo89 for Xposed
@wanam for he's XTouchWiz Xposed Module
@Chainfire for Superuser
@viper520 for Viper4Android
@Ben Feutrill for he's eXtremeBeats Audio Mod
VERSION INFO:
Status: Stable
Current Stable Version: AXES Rom v1
Stable Release Date: Sat, May 13 2017
Hello A5 2017 Users,
Thank you for taking a look at what modified software (Rom) we have to offer for your device. In return we welcome you into considering joining our Galaxy A5 2017 Whatsapp Group.
If your interested, don't hesitate to check out the Original Xda Thread here:
https://forum.xda-developers.com/samsung-a-series-2017/how-to/galaxy-a5-2017-whatsapp-t3561455
Best Regards,
The AXES Team
Don't forget to thank the Lead Developer/Main Developer @XxViRUsPRO in he's post down below for making all of this possible!
Also we'd love to hear from you through your feedbacks and ratings as it is much appreciated and it's what keeps us going into providing new updates and a better overall experience. So be honest above all else.
DOWNLOAD LINK:
https://mega.nz/#!4phlVZyT!oJDhCQyDqldlRSnALTF2itmZ_8p4eUZ_-7wudTUZLI4
Screenshots & Installation Instructions are available in the other posts down below.

Changelog:
[Sat, May 13 2017]: Initial Release
----------------------------​

Screenshots:

Requirements for installing AXES Rom:
1- A Human Brain
2- A PC/Laptop running Windows OS
3- Samsung USB-C Cable (USB-C to USB-A) which obviously comes with your phone in it's retail box.
4- Patience & Time at hand
Make sure to backup your files, contacts and so on before attempting to tamper with your device unofficially as the data residing in your phone's storage will be wiped!

Instructions on installing AXES Rom:
1- Go to your devices Settings ---> About device ---> Software info and tap on it's "Build number" several times in a row till a message appears saying that you have unlocked Developers mode.
Go back one step and you'll find a new option defined as: "Developers mode".
Without further ado select Developers mode in Settings and turn on: "OEM unlock".
2- Make sure the above step is fulfilled before you move on to this step. This guide is case sensitive and your device is on the line in case you do not follow the necessary steps provided in the right sequence and way.
Turn Off your phone completely and press and hold it's Power Button along with it's Volume Down Button & Home Button to enter: "Download Mode".
After the Samsung phone name logo, you will see a blue screen with a warning sign.
Proceed by simply pressing the Volume Up button once as seen on the screen.
Now you are in the: "Download Mode" aka: "Odin Mode" for flashing firmware files using the Samsung flashing tool called Odin.
3- In this step we will be attempting to Flash a Custom Recovery entitled: "TWRP" which stands for: "Team Win Recovery Project".
To do so we will need to download the Odin Windows Application as described above in Step 2 for flashing the custom recovery file.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
Odin v3.12.3 Download Link:
https://forum.xda-developers.com/showthread.php?t=2711451
You'll find the link in the attachments section below the thread.
TWRP Recovery v3.0.2.0 (ONLY for SM-A520F/DS) Download Link:
https://www.androidfilehost.com/?fid=745425885120710156
Once you've download both files from the given links above, extract the folder: "Odin3 v3.12.3" from the Odin3 v3.12.3.zip file to your desktop and move the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file to the Odin folder you just extracted.
Run the Odin3 Application within that folder.
Click on the: "Options" Tab after Log and uncheck: "Auto Reboot" and make sure that: "F. Reset Time" is checked.
Go back to the: "Log" Tab and click on the: "AP" button and select the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file you just moved to the Odin folder in your desktop.
In order for Odin to detect that your phone's connected to your PC/Laptop make sure you have the Samsung Usb Driver for Mobile Phones installed onto your PC/Laptop.
If you already have it installed then simply skip obtaining it from the download link below.
Samsung Usb Driver for Mobile Phones Download Link:
https://yadi.sk/d/uubiaKw6j8bug
Afterwards connect your phone to your PC/Laptop using the Samsung USB-C Cable.
Once Odin displays that your device is connected, hit the: "Start" button below and wait for the file to be done flashing. You will notice above a green progress bar filling up towards the end and also your phone's screen will display a white progress bar to go along with it.

4- Odin will display a green: "Done" box above when it's done flashing TWRP Recovery.
Afterwards we will reboot our phone normally by simply pressing and holding the Volume Up Button and Power Button for a few seconds (around 10 sec.) and then we instantly press and hold the Volume Up Button along with the Power Button and Home Button before we see the Samsung Galaxy A5 Bootlogo in order to successfully boot to TWRP Recovery.
5- You will reach a TWRP Recovery screen asking you if you want to allow system modifications. Swipe right and enable modifications and select: "Don't show this again".
6- For the Internal Storage or Data to work in TWRP Recovery we will have to go to: "Wipe" then "Format Data" (not advanced wipe) and type: "yes".
Go to: "Reboot" and select: "Recovery".
7- Your phone will reboot to TWRP Recovery once again.
If you have the Rom zip file available in your External SD Card then skip Part 1 of this step and move on to Part 2.
Part 1: While running TWRP Recovery on your device, connect your phone to your PC/Laptop using the usb cable and copy the Rom zip file to your phone's Internal Storage.
Part 2: Finally go to: "Install", select storage and select: "Internal" or "External storage" wherever you copied and stored the AXES Rom zip file.
Locate the Rom in either storages, select it and swipe to the right to flash it.
Wait for the Rom to be flashed entirely and then select the reboot option.
Rebooting to the system will require about 5 minutes so be patient and don't forget to report back to us with your experience!

Does this rom flash thru odin or???

No You Can Flash It Only Via Custom Recovery Like TWRP and CWM

in testing.
thanks for the rom.

Is it safe to flash this rom to a SM-A520F??? not duos

Kargi said:
Is it safe to flash this rom to a SM-A520F??? not duos
Click to expand...
Click to collapse
This ROM Is For SM-A520F/DS

LorDElazAR said:
Screenshots:
Click to expand...
Click to collapse
Whats up with this UI?

argoitiaangeel said:
Whats up with this UI?
Click to expand...
Click to collapse
This Is Samsung Good Lock UI and This Can Be Modified By User So He Can Change Colors,Clock And Lock Screen Effects

Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM

NO OS INSTALLED .. after flashing through TWRP ..
XxViRUsPRO said:
Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM
Click to expand...
Click to collapse
can u make a video how to flash this rom successfully. tnk u /

Nougat Comming.... All Test :good:
For Now! For More Helping [Press Thanks Buttom & Go Try My ROM]

xAce4 said:
can u make a video how to flash this rom successfully. tnk u /
Click to expand...
Click to collapse
Hello xAce4!
Make sure to follow the Instructions in the posts above you for Installing the Rom successfully.

Samsung theme work on this rom?

mcvisster said:
Samsung theme work on this rom?
Click to expand...
Click to collapse
Yes it's available.

reserved

Galaxy J7 Prime SM-G610M - G610M/DS - Android 7 Nougat Stock ☆ TTT - SPL 2018-06-01 ☆

Download the firmware for the Galaxy J7 Prime SM-G610M with product code TTT from Trinidad and Tobago. This firmware has version number PDA G610MUBS1BRF3 and CSC G610MUUB1BRD1. The operating system of this firmware is Android 7.0 , with build date Thu, 14 Jun 2018 23:11:07 +0000. Security patch date is 2018-06-01, with changelist 12546423.
- Model ... SM-G610M
- Model name ... Galaxy J7 Prime
- Country ... Trinidad and Tobago
- Version ... Android 7.0
- Changelist ... 12546423
- Build date ... Thu, 14 Jun 2018 23:11:07 +0000
- Security Patch Level ... 2018-06-01
- Product code ... TTT
- PDA ... G610MUBS1BRF3
- CSC ... G610MUUB1BRD1
Download Firmware ... Sammobile
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TTT/download/G610MUBS1BRF3/225631/
Download Firmware ... Mediafire
https://www.mediafire.com/file/muav9i3bb2o5003/Android_7_Nougat_Stock_J7_Prime_SM-G610M-DS_%255BTTT_-_B1%255D_%255B21-07-2018%255D_By_JHAM2005.rar/file
Download ... Odin
https://www.mediafire.com/file/b31gmzgmx9hn4l8/Odin3-v3.13.1.zip/file
Download ... Samsung USB Driver
https://www.mediafire.com/file/ge9eff95t3dbda0/Samsung_USB_Driver_for_Mobile_Phones_1.5.51.0.exe/file
Installation Instructions
1.- Download Odin 3.13.1 + Samsung USB Driver
2.- Extract the firmware file you just downloaded. You should get 5 files:
- AP (System &Recovery)
- BL (Bootloader)
- CP (Modem / Radio)
- CSC_*** (Country / Region / Operator)
- HOME_CSC_*** (Country / Region / Operator)
3.- Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4.- Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
- Option 2 VOLUME DOWN + VOLUME UP than USB cable
- Option 3 POWER + VOLUME DOWN + VOLUME UP
- Option 4 POWER + VOLUME DOWN + HOME BUTTON
5.- Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6.- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7.- Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
How to Root J7 Prime * G610M - G610M/DS * Android 7 Nougat Stock
NOTE:
1.- IT IS NECESSARY TO GO TO: Settings -> Developer Options -> OEM unlocking AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
2.- KNOX will be tripped once you flashed custom binaries to your phone.
3.- Samsung Firmware System Updates will no longer work once you flashed custom binaries.
How to Install
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- It is necessary to have the files to release the memory and the root file in the Pendrive (USB) to use them by OTG
4.- Enter the advanced recovery and install the ... zip ... no-verity-opt-encrypt.zip ... need a OTG adapter + USB Pendrive
5.- Go back and give ... Then Format Data ... YES ...
6.- Restart the mobile
7.- Configure the mobile to suit the user
8.- Turn off the mobile and enter the Recovery
9.- Install the root zip to use ... SuperSU or Magisk
Restart the mobile
Enjoy :fingers-crossed:
MOUNT INTERNAL STORAGE
- To mount internal storage you need to remove forced encryption by flashing this zip in TWRP
no-verity-opt-encrypt.zip
- Then you may need to format/data to boot properly.
Download ... Recovery (TWRP)
https://www.mediafire.com/file/elwuin9e8jnca2a/TWRP-3.2.1-For-Galaxy-J7-Prime.tar/file
Download ... no-verity-opt-encrypt
https://www.mediafire.com/file/6e6ger5w5i5w1bl/no-verity-opt-encrypt-6.0.zip/file
Download ... SuperSU
https://www.mediafire.com/file/ukltn1drrf1lj1b/SuperSU-v2.82-201705271822.zip/file
Download ... Magisk
https://www.mediafire.com/file/16m3m8bqdtc3v9a/Magisk_-_Root_%2526_Universal_Systemless_Interface_16.7.rar/file

I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload

SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
You can use the files without any problem, they still work in a previous version

JHAM2005 said:
You can use the files without any problem, they still work in a previous version
Click to expand...
Click to collapse
Thanks for this, I will look around for a good custom rom based on TouchWiz, if you know someone and flashing No-verity and formatting data TWRP still not recognicing ext. sdcard.

Twrp para J7 Prime G610M atualizado ?

israel dos santos said:
Twrp para J7 Prime G610M atualizado ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.

Is the bootloader necessary?
AeonGV_ said:
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Click to expand...
Click to collapse
Is the bootloader necessary?

Heeelp me please !! =D
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:

jpdobler7 said:
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
Click to expand...
Click to collapse
Sorry for delay, it's really a very old post that I don't remember exactly the issue with TWRP.
Install this universal ADB drivers onto your Windows PC https://adb.clockworkmod.com/ then connect your device power on to the PC, and see if it's properly recogniced typing
Code:
adb devices
if yes then you can continue, type:
Code:
adb reboot recovery
to reboot to TWRP, then place the zip that you want to flash onto your device either DM verity or Magisk in the same folder where ADB was installed, usually on your main drive (this just to avoid paths input) go to Advanced settings in TWRP and search for ADB Sideload feature, swipe from your device to start it and in your ADB/fastboot terminal type:
Code:
adb sideload name-of-your-file.zip
to sideload it to your device and it's all. (replace name-of-your-file.zip with the name of the file that you'll go to flash keeping the .zip extension)

nao pegou SM (610M)DS