Database Develop

[unofficial][cwm-recovery]fb0 unofficial cwm recovery v6.0.1.3 (jb source)

UNOFFICIAL CWM RECOVERY V6.0.1.3 FOR FIH-FB0​
this is cwm recovery build from latest cm10 source..
working :
- flashing zip
- backup and restore
- all wipe operation
- sd-card mounting
not working :
- recovery log
benefit if using this recovery :
- wipe faster
- backup and restore faster
- flashing zip file faster
DOWNLOAD : fb0-cwm-recovery-v6.0.1.3.zip
(This is not an update.zip, please extract zip content and follow these instructions carefully)
* Extract recovery.img from fb0-cwm-recovery-v6.0.1.3.zip
* Power off your phone. Now press Volume UP + Power button to enter in Download mode (Please keep Volume UP button pressed for a second before pressing Power button)
* Connect your phone to PC via USB and wait until USB-Storage device appears on your PC (In Linux, you might see loads of new devices being mounted. But we are concerned about the device with name as 'FIH')
* Replace file recovery.img inside the folder image (In windows, X:\image\, where X is drive letter for new USB device)
* Safely remove USB device to ensure complete file copy
* Disconnect phone from PC
* Remove battery of your phone to power off and then start it again.
!!! WARNING !!!
!!! ONLY WORKS ON 2.6.35.7 KERNEL !!!
!!! BACKUP YOUR RECOVERY.IMG FIRST !!!
!!! DO WITH YOUR OWN RISK !!!​

wow big big font , just kidding ..................
very much thanks for the recovery... downloading it ....

we love u so much abne...
thank you very much.

many thanks
Thanks aben.
WE are waiting for your cm10 which u said us to wait. please give us ur version of cm10 too.
thanks again

Thanks. Working fine.

can this be compiled to our fih-fb0 devices http://forum.xda-developers.com/showthread.php?t=1943625

Thanks... All good....
For me the power button for selection not working as per previous Version of CWM... Have to use the Search Softkey......

Hi,
Screenshots and differences from previous version please.....
...Pranjal

2.3.6 to 4.1 , help

Hi,
Ive just bought a used Galaxy Note running Stock 2.3.6 (N7000XXLC1 Kernel an N7000XXLB2 baseband) and want to put the latest jellybean rom on.
Ive read through lots of threads about the brick warning and so on, i just want to know how to go from 2.3.6 and have it rooted and cwm on and the latest 4.1 leak or a modified 4.1
Could somebody please tell me the steps to do it as dont want to brick it and this 2.3.6 is rubbish
Matt

Hello!
I've rooted my Note like this:
#1
Get the original software (like N7000XXLRU - the file is 914Mb and it is a *.md5 file. ) and odin (Odin3 v1.87), install it in odin...how?
Open odin and put the file in PDA.
Option in odin leave alone (Auto Reboot & F. Reset Time; are selected)
Put Note in download mode: Volume Down Key + Home Key + Power Key; then Volume up key to continue
Connect the phone to computer
Odin recognize the phone and you will see it on COM port
Click Start
After several minutes the phone will turn on.
Now you have a original sw on your phone, and believe me this sw is GREAT...but if you want more...
#2
Root you phone
Described in this link (http://forum.xda-developers.com/showthread.php?t=1329360)
I used ''1A.Root + safe kernel + advance recovery''
Just read carefully (will write it down)
Visit this thread
http://forum.xda-developers.com/showthread.php?t=1901191
And download kernel in zip format according ROM you are having on device (just look for XXLRU-VDI; PhilZ-cwm6 v3.5 with CWM 6.0.1.8)
Copy downloaded file to Ext SD card to root directory (or any folder you make; I have ''A_ROOT'' for this things)
Reboot into recovery (Volume Up Key + Home Button + Power Key)
Select install(update) zip from ext SD card (Install zip >> Choose zip from sdcard; and click on the *.zip file)
select '[your downloaded kerenel].zip' which you have copied to Ext card above
Reboot device
Now you will have Root + safe kernel
And your phone is rooted now. You can have all the programs that work only when your phone is rooted (Titanium Backup, Root Uninstaller, Root Browser Lite, ...)
#3
Your phone is now ready to install all Android Development ROMs
Read each post ''How to flash'' it is easy
For instance I like stock rom and love 4.1.2, so i have sw from http://forum.xda-developers.com/showthread.php?t=1970626
Example:
Save *.zip on your SD/EXT Card (Ultimate N7000 XXLSA JellyBean 4.1.2 v5)
Restart in CWMR (Volume Up Key + Home Button + Power Key)
Be sure you're on SAFE KERNEL, then you can wipe (jes you are - on PhilZ-cwm6)
Full wipe /data/factory reset /cache and dalvik (dalvik is in advanced option)
Flash the ROM (Install zip >> Choose zip from sdcard; and click on the *.zip file)
Wait some minute until your phone boot!
You are done. That's all.
I've never had any problems with any of the ROMs. You can do the #3 1000 times and nothing will go wrong. Just remember to do a back up in CWM, when you have a rom that works great for you and you like. So if anything happens and you phone is stuck in ''samsung'' sing, you can go in CMW and restore it.
I hope it helps and I didn't forget anything.

Thanks so much for posting. I followed all the instructions and it worked fine. I have however gone and installed a 4.0.4 rom after using 4.1 for a bit and finding it too juddery.
Thanks again
Matt

No problem.
You can wait for the official firmware release and then everything will work 100%.

Since he didnt i hit thanks
Sent from my Amazon Kindle Fire using Tapatalk 2

Have hit thanks now , forgot!

[Modems] Collections for our G900H [Exynos Only]

Hi all, we will continue building the collection modems for our G900H.​
* The idea is that we all collaborate with the modem we have and why to use that modem
Everybody can upload here or send to me by PM (private message)
Note: This is at your own responshabilidad I am not responsible for any inconvenience, try consulting and removed all doubt that we will answer before trying to do something!
Note2: Sorry, but my english is tooooo bad.
Installation with Odin:
* Make a backup first
* Download file .bin
* Open odin Odin 3.09
* Choose CP or Phone (depending on the version of odin) seek and load the file .bin
* We put the device in Download mode (volume down + power + home button)
* We connect the device to the PC by USB connection and hope that mark in the first box the left. in yellow or blue (depending on the version of Odin)
* We press Start 10 seconds, the device will reset itself, modem installed!
Modems for G900H for Odin:
G900HXXU1ANCI TGP (Free Argentina)
G900HXXU1ANCI Claro (Argentina)
G900HXXU1ANG3 ARO (Argentina)
G900HXXU1ANG3 TMC (Algeria)
G900HXXU1ANH1 TGU (Guatemala)
Installation with CWM:
* Backup first
* Download the zip file
* Copy the zip file to our internal SD
* Reboot into recovery mode
* Select the zip and flash it
* Reboot
* Done!
Modems for G900H CWM:
G900HXXU1ANG3 ARO (Argentina)
G900HXXU1ANI1 EON
G900HXXU1ANH1 TGU
G900HXXU1ANI1 ARO
ice [N]ation

Where is it G900FQ international model
SM-G900FQ cihazımdan Tapatalk kullanılarak gönderildi

thnx:good:

..

fffft said:
You're missing a lot of G900x models e.g. SM-G900A/SM-G900D/SM-G900K/SM-G900S/SM-G900V, etc.
Also USC is SM-G900R4, not RT, SM-G900W8 is also used in Puerto Rico, etc.
.
Click to expand...
Click to collapse
If you have all that modems, send me via PM.
ice [N]ation

links
thanks for the threads...links brocken
any modems for kenya?

[ROM][STABLE][SM-A520X][AXES ROM v1][DEODEX/ROOT/XPOSED/BUSYBOX & MORE!]

Code:
/*
* Your warranty is now void.
*
* We (The AXES Team) are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, We will laugh at you.
*/
AXES Rom as in: "AlexsaderXxvirusElazarSystem", is a Stock Touchwiz Marshmallow Rom based on the A520FXXU1AQC3 firmware for the Samsung Galaxy A5 2017 Smartphone which is compatible with the following Model Numbers:
A520F (Europe, Global Single-SIM)
A520F/DS (Global Dual-SIM)
A520K/L/S (South Korea)
A520W (Canada)
FEATURES:
1- February 2017 Security Patch
2- Pre-rooted
3- Xposed Framework Pre-installed
4- XTouchWiz Xposed Module Pre-installed
5- Busybox Pre-installed
6- Samsung's Good Lock UI applied
7- Galaxy S8 Touchwiz Launcher set as the default launcher
8- Nova Launcher available as well
9- Multiple User Accounts (Main, Guest)
10- Advanced Reboot Menu
11- Pop-up View Gestures
12- Samsung Galaxy Note 7 Apps Edge
13- build.prop Tweaks
14- Viper4Android v2.3.4.0 (Make sure to use the: "Compatible Mode" option in the Viper app since we've inserted another sound mod)
For more info you can check out VIPER'S Audio Website here:
http://vipersaudio.com/blog/?page_id=127
And the Official Xda Thread here:
https://forum.xda-developers.com/showthread.php?t=2191223
15- eXtremeBeats Aural Maximizer 2™ Audio Mod
For more info you can check out the Official Xda Thread of eXtremeBeats here:
https://forum.xda-developers.com/showthread.php?t=2634729
16- S Health Available & Working
17- Knox removed
18- Comes in a 1.4 GB of Size Package
CREDITS:
@alexsaderxda ---> He's Rom as base for AXES Rom and he's help in the Development Area
@XxViRUsPRO ---> Lead Developer/Main Developer
@LorDElazAR ---> Ideas for the Rom and the Creator of this Thread along with it's Text
SPECIAL THANKS:
@samsung for their Firmware & Good Lock UI
@SuperR. for he's Linux Kitchen
@JustArchi for he's ArchiKitchen
@rovo89 for Xposed
@wanam for he's XTouchWiz Xposed Module
@Chainfire for Superuser
@viper520 for Viper4Android
@Ben Feutrill for he's eXtremeBeats Audio Mod
VERSION INFO:
Status: Stable
Current Stable Version: AXES Rom v1
Stable Release Date: Sat, May 13 2017
Hello A5 2017 Users,
Thank you for taking a look at what modified software (Rom) we have to offer for your device. In return we welcome you into considering joining our Galaxy A5 2017 Whatsapp Group.
If your interested, don't hesitate to check out the Original Xda Thread here:
https://forum.xda-developers.com/samsung-a-series-2017/how-to/galaxy-a5-2017-whatsapp-t3561455
Best Regards,
The AXES Team
Don't forget to thank the Lead Developer/Main Developer @XxViRUsPRO in he's post down below for making all of this possible!
Also we'd love to hear from you through your feedbacks and ratings as it is much appreciated and it's what keeps us going into providing new updates and a better overall experience. So be honest above all else.
DOWNLOAD LINK:
https://mega.nz/#!4phlVZyT!oJDhCQyDqldlRSnALTF2itmZ_8p4eUZ_-7wudTUZLI4
Screenshots & Installation Instructions are available in the other posts down below.

Changelog:
[Sat, May 13 2017]: Initial Release
----------------------------​

Screenshots:

Requirements for installing AXES Rom:
1- A Human Brain
2- A PC/Laptop running Windows OS
3- Samsung USB-C Cable (USB-C to USB-A) which obviously comes with your phone in it's retail box.
4- Patience & Time at hand
Make sure to backup your files, contacts and so on before attempting to tamper with your device unofficially as the data residing in your phone's storage will be wiped!

Instructions on installing AXES Rom:
1- Go to your devices Settings ---> About device ---> Software info and tap on it's "Build number" several times in a row till a message appears saying that you have unlocked Developers mode.
Go back one step and you'll find a new option defined as: "Developers mode".
Without further ado select Developers mode in Settings and turn on: "OEM unlock".
2- Make sure the above step is fulfilled before you move on to this step. This guide is case sensitive and your device is on the line in case you do not follow the necessary steps provided in the right sequence and way.
Turn Off your phone completely and press and hold it's Power Button along with it's Volume Down Button & Home Button to enter: "Download Mode".
After the Samsung phone name logo, you will see a blue screen with a warning sign.
Proceed by simply pressing the Volume Up button once as seen on the screen.
Now you are in the: "Download Mode" aka: "Odin Mode" for flashing firmware files using the Samsung flashing tool called Odin.
3- In this step we will be attempting to Flash a Custom Recovery entitled: "TWRP" which stands for: "Team Win Recovery Project".
To do so we will need to download the Odin Windows Application as described above in Step 2 for flashing the custom recovery file.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
Odin v3.12.3 Download Link:
https://forum.xda-developers.com/showthread.php?t=2711451
You'll find the link in the attachments section below the thread.
TWRP Recovery v3.0.2.0 (ONLY for SM-A520F/DS) Download Link:
https://www.androidfilehost.com/?fid=745425885120710156
Once you've download both files from the given links above, extract the folder: "Odin3 v3.12.3" from the Odin3 v3.12.3.zip file to your desktop and move the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file to the Odin folder you just extracted.
Run the Odin3 Application within that folder.
Click on the: "Options" Tab after Log and uncheck: "Auto Reboot" and make sure that: "F. Reset Time" is checked.
Go back to the: "Log" Tab and click on the: "AP" button and select the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file you just moved to the Odin folder in your desktop.
In order for Odin to detect that your phone's connected to your PC/Laptop make sure you have the Samsung Usb Driver for Mobile Phones installed onto your PC/Laptop.
If you already have it installed then simply skip obtaining it from the download link below.
Samsung Usb Driver for Mobile Phones Download Link:
https://yadi.sk/d/uubiaKw6j8bug
Afterwards connect your phone to your PC/Laptop using the Samsung USB-C Cable.
Once Odin displays that your device is connected, hit the: "Start" button below and wait for the file to be done flashing. You will notice above a green progress bar filling up towards the end and also your phone's screen will display a white progress bar to go along with it.

4- Odin will display a green: "Done" box above when it's done flashing TWRP Recovery.
Afterwards we will reboot our phone normally by simply pressing and holding the Volume Up Button and Power Button for a few seconds (around 10 sec.) and then we instantly press and hold the Volume Up Button along with the Power Button and Home Button before we see the Samsung Galaxy A5 Bootlogo in order to successfully boot to TWRP Recovery.
5- You will reach a TWRP Recovery screen asking you if you want to allow system modifications. Swipe right and enable modifications and select: "Don't show this again".
6- For the Internal Storage or Data to work in TWRP Recovery we will have to go to: "Wipe" then "Format Data" (not advanced wipe) and type: "yes".
Go to: "Reboot" and select: "Recovery".
7- Your phone will reboot to TWRP Recovery once again.
If you have the Rom zip file available in your External SD Card then skip Part 1 of this step and move on to Part 2.
Part 1: While running TWRP Recovery on your device, connect your phone to your PC/Laptop using the usb cable and copy the Rom zip file to your phone's Internal Storage.
Part 2: Finally go to: "Install", select storage and select: "Internal" or "External storage" wherever you copied and stored the AXES Rom zip file.
Locate the Rom in either storages, select it and swipe to the right to flash it.
Wait for the Rom to be flashed entirely and then select the reboot option.
Rebooting to the system will require about 5 minutes so be patient and don't forget to report back to us with your experience!

Does this rom flash thru odin or???

No You Can Flash It Only Via Custom Recovery Like TWRP and CWM

in testing.
thanks for the rom.

Is it safe to flash this rom to a SM-A520F??? not duos

Kargi said:
Is it safe to flash this rom to a SM-A520F??? not duos
Click to expand...
Click to collapse
This ROM Is For SM-A520F/DS

LorDElazAR said:
Screenshots:
Click to expand...
Click to collapse
Whats up with this UI?

argoitiaangeel said:
Whats up with this UI?
Click to expand...
Click to collapse
This Is Samsung Good Lock UI and This Can Be Modified By User So He Can Change Colors,Clock And Lock Screen Effects

Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM

NO OS INSTALLED .. after flashing through TWRP ..
XxViRUsPRO said:
Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM
Click to expand...
Click to collapse
can u make a video how to flash this rom successfully. tnk u /

Nougat Comming.... All Test :good:
For Now! For More Helping [Press Thanks Buttom & Go Try My ROM]

xAce4 said:
can u make a video how to flash this rom successfully. tnk u /
Click to expand...
Click to collapse
Hello xAce4!
Make sure to follow the Instructions in the posts above you for Installing the Rom successfully.

Samsung theme work on this rom?

mcvisster said:
Samsung theme work on this rom?
Click to expand...
Click to collapse
Yes it's available.

reserved

Galaxy J7 Prime SM-G610M - G610M/DS - Android 7 Nougat Stock ☆ TTT - SPL 2018-06-01 ☆

Download the firmware for the Galaxy J7 Prime SM-G610M with product code TTT from Trinidad and Tobago. This firmware has version number PDA G610MUBS1BRF3 and CSC G610MUUB1BRD1. The operating system of this firmware is Android 7.0 , with build date Thu, 14 Jun 2018 23:11:07 +0000. Security patch date is 2018-06-01, with changelist 12546423.
- Model ... SM-G610M
- Model name ... Galaxy J7 Prime
- Country ... Trinidad and Tobago
- Version ... Android 7.0
- Changelist ... 12546423
- Build date ... Thu, 14 Jun 2018 23:11:07 +0000
- Security Patch Level ... 2018-06-01
- Product code ... TTT
- PDA ... G610MUBS1BRF3
- CSC ... G610MUUB1BRD1
Download Firmware ... Sammobile
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TTT/download/G610MUBS1BRF3/225631/
Download Firmware ... Mediafire
https://www.mediafire.com/file/muav9i3bb2o5003/Android_7_Nougat_Stock_J7_Prime_SM-G610M-DS_%255BTTT_-_B1%255D_%255B21-07-2018%255D_By_JHAM2005.rar/file
Download ... Odin
https://www.mediafire.com/file/b31gmzgmx9hn4l8/Odin3-v3.13.1.zip/file
Download ... Samsung USB Driver
https://www.mediafire.com/file/ge9eff95t3dbda0/Samsung_USB_Driver_for_Mobile_Phones_1.5.51.0.exe/file
Installation Instructions
1.- Download Odin 3.13.1 + Samsung USB Driver
2.- Extract the firmware file you just downloaded. You should get 5 files:
- AP (System &Recovery)
- BL (Bootloader)
- CP (Modem / Radio)
- CSC_*** (Country / Region / Operator)
- HOME_CSC_*** (Country / Region / Operator)
3.- Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4.- Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
- Option 2 VOLUME DOWN + VOLUME UP than USB cable
- Option 3 POWER + VOLUME DOWN + VOLUME UP
- Option 4 POWER + VOLUME DOWN + HOME BUTTON
5.- Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6.- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7.- Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
How to Root J7 Prime * G610M - G610M/DS * Android 7 Nougat Stock
NOTE:
1.- IT IS NECESSARY TO GO TO: Settings -> Developer Options -> OEM unlocking AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
2.- KNOX will be tripped once you flashed custom binaries to your phone.
3.- Samsung Firmware System Updates will no longer work once you flashed custom binaries.
How to Install
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- It is necessary to have the files to release the memory and the root file in the Pendrive (USB) to use them by OTG
4.- Enter the advanced recovery and install the ... zip ... no-verity-opt-encrypt.zip ... need a OTG adapter + USB Pendrive
5.- Go back and give ... Then Format Data ... YES ...
6.- Restart the mobile
7.- Configure the mobile to suit the user
8.- Turn off the mobile and enter the Recovery
9.- Install the root zip to use ... SuperSU or Magisk
Restart the mobile
Enjoy :fingers-crossed:
MOUNT INTERNAL STORAGE
- To mount internal storage you need to remove forced encryption by flashing this zip in TWRP
no-verity-opt-encrypt.zip
- Then you may need to format/data to boot properly.
Download ... Recovery (TWRP)
https://www.mediafire.com/file/elwuin9e8jnca2a/TWRP-3.2.1-For-Galaxy-J7-Prime.tar/file
Download ... no-verity-opt-encrypt
https://www.mediafire.com/file/6e6ger5w5i5w1bl/no-verity-opt-encrypt-6.0.zip/file
Download ... SuperSU
https://www.mediafire.com/file/ukltn1drrf1lj1b/SuperSU-v2.82-201705271822.zip/file
Download ... Magisk
https://www.mediafire.com/file/16m3m8bqdtc3v9a/Magisk_-_Root_%2526_Universal_Systemless_Interface_16.7.rar/file

I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload

SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
You can use the files without any problem, they still work in a previous version

JHAM2005 said:
You can use the files without any problem, they still work in a previous version
Click to expand...
Click to collapse
Thanks for this, I will look around for a good custom rom based on TouchWiz, if you know someone and flashing No-verity and formatting data TWRP still not recognicing ext. sdcard.

Twrp para J7 Prime G610M atualizado ?

israel dos santos said:
Twrp para J7 Prime G610M atualizado ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.

Is the bootloader necessary?
AeonGV_ said:
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Click to expand...
Click to collapse
Is the bootloader necessary?

Heeelp me please !! =D
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:

jpdobler7 said:
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
Click to expand...
Click to collapse
Sorry for delay, it's really a very old post that I don't remember exactly the issue with TWRP.
Install this universal ADB drivers onto your Windows PC https://adb.clockworkmod.com/ then connect your device power on to the PC, and see if it's properly recogniced typing
Code:
adb devices
if yes then you can continue, type:
Code:
adb reboot recovery
to reboot to TWRP, then place the zip that you want to flash onto your device either DM verity or Magisk in the same folder where ADB was installed, usually on your main drive (this just to avoid paths input) go to Advanced settings in TWRP and search for ADB Sideload feature, swipe from your device to start it and in your ADB/fastboot terminal type:
Code:
adb sideload name-of-your-file.zip
to sideload it to your device and it's all. (replace name-of-your-file.zip with the name of the file that you'll go to flash keeping the .zip extension)

nao pegou SM (610M)DS