Database Develop

Phone stuck in "headphone mode" (PLEASE HELP)

For somereason, my phone is stuck in Headphone mode.
like on the top corner, it shows that my phone is still in headphone state.
the problem is that even when my headphone is unplugged my phone is still in that state...
...meaning that, without my headphones plugged in, the other party cannot hear me and i cannot hear them.
i tried soft and hard resetting the phone, but nothing works.
Everything else is working phone, it just that i cannot make a call, answer a call, listen to music without my headphone....
Any help or tips is greatly appreciated.
Thanks alot!!

it already happend to my phone.. what i did is i connect the headset again and did remove my battery and remove the headset then turned on the phone again and the headset icon disappears.
if your problem still continues, i guess you should go to sony ericsson for replacement it seems your jack is grounded or alike. i heard that the jack is somewhat tight and could put a groove in you headset male jack.

PROBLEM SOLVED....
http://www.portability.nl/windows-m...artphone-stuck-in-headset-or-car-profile.html
apparently its a hardward problem...

I had the same problem. This is what i did put your headset back in turn windows media player on now start a song and pull out the headset. Now it should get out of headset mode. Thats what has been working for me twice.

The other thing to watch for too, and this was a big problem with the older model HTC/SPV Devices, is that the detection switch inside the socket gets stuck.
I had this happen many times on my various SPV's up until HTC Started producing models where the headphones plugged into the mini USB.
If it does happen to be the switch getting stuck, you can try plugging in the headset and wiggling it about a bit, or i found that a wooden cocktail stick was a rather good device, to just poke in and rattle about a little bit.

shawty said:
If it does happen to be the switch getting stuck, you can try plugging in the headset and wiggling it about a bit, or i found that a wooden cocktail stick was a rather good device, to just poke in and rattle about a little bit.
Click to expand...
Click to collapse
the stylus is good too.

Hi there,
got the same problem. Tried everything, soft- and hard-reset, cleaned the connector with some alcohol....
Just before i got in the mood to open the case to have a deeper look at the connector, i stumbled over here
This is what i did put your headset back in turn windows media player on now start a song and pull out the headset. Now it should get out of headset mode. Thats what has been working for me twice.
Click to expand...
Click to collapse
This also worked for me
As a conclusion, i think there are several reasons (as usual ) that lead to this problem.
It may partly rely on the connector itself, e.g. bad "on" resistance of the contacts or mechanical twisted in any way.
Maybe some of the internal pull-up resistors are to weak also.
Additionally the software driver may have some issues, to indicate the "plug out" properly.
I also had such issue on HTC universal once upon a time.
It was also partly software related. In other words some "plug-in-plug-out" loops while playing some music solved the issue on that device.
Anyway, this maybe called another weird bug on a winmob platform.
Thanks for the hint again!!!
Best regards,
scholbert

It's me again
I wonder if these headphone problems had gone with the latest firmware.
With R1AA017 the "headphone mode" issue could be reproduced a 1000 times.
1. Today screen, plug in the headphone
2. plug out headphone, headphone symbol stays active
3. plug in headphone again and start WM player
4. start some music, plug out headphone, symbol is gone, sound from the speaker
EDIT:
As it seems with R2AA006 the "headphone mode" issue is gone.
1. Today screen, plug in the headphone, headphone symbol appears
2. plug out headphone, headphone symbol disappears
Works as it should!
Anyway, please report if you ever got these problems and what kind of firmware you are using.
Let's try to concentrate on stock images (R2... , R3...), otherwise this would get very confusing
Cheers,
scholbert

sent it back for repair ... this happened to me twice and i sent it back for repair and the problem was with the headphone not the phone itself

Hi it happened to me as well. so after few times i was pi.... off and i send it to back to SE repair centre. and i also claim a crack in case. and believe or not they fix it in 12 days. That means SE knows those problems very well. my advise is dont be shy and send it there , they will fix it without any hassle.

try to drain the battery and charge it back up.

I also sent it back. After 5 weeks the idiots at SE Service returned it unrepaired, charged me 40 €, and claimed that the phone was once opened (it was not).
Will now buy an HTC or Nokia. Never ever again an SE.

It Got Solved
Hi It's very simple take your stylus and insert it into the headphone socket and move very gently, It will solve the problem.
For me it had worked always.
Weird but works

Hi all
ive been having the same prob here ... :
phone remains in headset mode even after jack is unplugged.
have been trying:
turning registry entry
blowing (worked at very rare times )
stylus/ pin playing ..
till now, no good solution
my request:
is there a way ( cab install, registry hack) so as to disable the whole of the headset.. its ok if i dont use it anymore.. ! i want it software, like some sort of software to disable the headset module completely ...
awaiting reply.
thanks & Regards,

Yeah I think there is a way. If you search for when I posted about this last year I think someone says how to do it in the comments.
Lots of people seem to be claiming that software tricks can solve this problem. If that worked for you, that's a co-incidence. Even re-flashing a different ROM won't sort out a mechanical fault. Just go get a safety pin.

my experience about the headphone problem
First time, when happaned I was crazy, because I coudn't answer a call and the phone looks like was broken. I suggest,(not a big deal) to close the player program prior you disconnet you headphone or in radio panel mode, to swicth to speaker listenig first and then plug off headphone. Nothing else, don't worry

Well, since I'm using a new phone I've decided I'm going to open my phone up to manually fix this problem as for me, what happened was, a very tiny screw got lodged within the headphone jack. I managed to get the screw out but I think I damaged the connector responsible for signaling that a headset is plugged in.
I have one problem however, I dont have the security screwdrivers nessary to gain access so I'm wondering, if anyone know any tricks to open the phone up. I've heard I can use locktite to bond the screw to whatever I want to use however that would be something I'd consider if I cant think of anything else. Until then I'll try using a screw driver just large enough to wedge itself in place and unscrew but if anyone has any ideas or suggestions, please if you would be so kind.
In the meantime if I make any headway I'll let you know what happens. (Does anyone want to know anything if I do open it up?).

Ok I opened it up... Let me tell you it certainly was difficult. My phone had suffered the cracking problem which made it somewhat hard to take apart without it falling to bits but I managed nevertheless.
As I peeled away parts of the phone to get to the small headphone jack, I instantly found the problem, the little clip that performs as the switch to headset mode was buckled... I got some really tiny pliers and I managed to re-bend it however, the clip wasn't touching the contact switch! *RAGE*. So I play around with it a little more and realise hang on... it's moving too much, I then noticed that the clip was actually cracked *ANGER*.
So I decided... ok, off goes the clip. I permanently soldered the connection instead and hey presto, no more headset mode, of course this means, I can never use headset mode but that's not a problem for me.
If anyone wants any help, please feel free to ask . I managed to give the keyboard a clean also! (No more double presses or keys that dont respond either!).

With this goddamn problem, is it possible to connect stereo bluetooth with sound?

Hammerhead89 said:
With this goddamn problem, is it possible to connect stereo bluetooth with sound?
Click to expand...
Click to collapse
Answering the last question: YES it should work as bluetooth audio has nothing to do with the headphone jack and I normally used bluetooth headset with the headphone mode stucked
coming back to topic It seems it is depending on case more soft or hardware-related. in my case it was rather hardware, no mediaplayer/radio method helping and putting stylus in helped only two times.
So I used compressed air to blow through the jack and then cleaned it with the earbud head/material ONLY (as the bud does not fit in) on a wooden stick (but then you might have hard times to pull the rest of the budhead out)
Anyways it worked, so far after many tries to make sure it doesn't get stucked !
I guess in future WD40 may be even better
Man this phone is so good and yet so full of bugs !!

Cant hear caller

Hey guys, Im having an issue with my xperia. I reflashed it to a new rom and hard-reset it. For some reason I can't hear the caller nor can the caller hear me when Im on a call. This just randomly started happening one day. Anyone help?
Edit, I just ntoiced my headphone icon won't go away. So I can only hear people if a headphone is connected, anyone know any way around this cause I'm thinking my sensor may be messed up. I dont know what to do now

SAV you can't do anything about this issue.
I have the same bug 3 months ago then my phone came back normal and 2 weeks ago the bug re appeared so SAV again ....

-connect your headphone
-run windows player with a video or an audio file
-during the play, slowly disconnect your headphone
The headphone icon must be away
If it does not work, the only solution is SAV...

well i was able to fix it yesterday. I dont know which one of these fixed it but I tried two methods. First I read is plugging in the headphone and slowly taking it out of the jack while pushing the headphone jack towards the screen. Then someone wrote that they used the pressurized air cleaner to blow inside the headphone hole. After trying those two methods, the headphone icon went away. Seems to be fine now. Thanks for the help though!
Maybe this will help someone else.
Also, what is SAV?

i got stereo bluetooth headphones and i haven't tested them yet. i got the same problem with this icon, and it won't go away. So, my question is: IS IT POSSIBLE TO CONNECT STREO BLUETOOTH WITH THIS ICON ON THE SCREEN?

No sound on ANY Android rom

Hey guys , im new in this subforum... ive flashed several roms and i've noticed that i don't have sound from the external speakers(i do have on headphones) which is kinda strange... the problem is not the speakers since i have sound on web os

Alphavillain said:
Hey guys , im new in this subforum... ive flashed several roms and i've noticed that i don't have sound from the external speakers(i do have on headphones) which is kinda strange... the problem is not the speakers since i have sound on web os
Click to expand...
Click to collapse
Try Turning the volume up and open another music app .

Erm ... no Tried almost everything....players...youtube...flash
.no sound even in the android(ringtones , etc.)...Ive noticed that it didn't charging also... is it possible to be drom clockwork ?( highly doubdt that )but once i reach enough battery percentage ill install the latest recovery...im stuck i WebOS for now :/

The only thing I would think to do is flash the ROM you are using again and see if it fixes anything. But you said its with all ROMs which doesnt make sense. Maybe its an app you have installed thats turning volume off. Its hard to say

I'm flashing it and installing NOTHING but google apps ... same sh*t :<
Oh ... btw no more sound in headphones too.

I think i found the Issue... its like the tablet constantly thinks that there is something in the jack ( headphones for example...) Is the any way to activate the speakers even with jack in the 3.5 port ?

Use the old sound drivers maybe
Sent from my SAMSUNG-SGH-T989 using xda premium

My old Pre Plus used to have that happen. Made by the same company so go figure. Lol. Try putting the headphones in and out until it triggers the connector and goes back to speaker sound. Don't be too rough with it though. I don't know if it will be the same but on my old phone, you plugged the headphones in and pulled out with some slight pressure towards the front. If your Touchapad thinks there is headphone in there when there's not, you just have to trigger that connection so it goes back. You can try cleaning the headphone port too if possible. There could be dust in there.

I've tried the in/out yesterday...it dint't worked. Today it hitter me that I've tried only cm9 and 10 based ROMs...so I've downloaded the classic nerd and everything worked fine...but I don't really like the ROM....Can anyone provide a link for the old sound drivers , pretty please :good:
My tablet constantly thinks that there are headphones attatched...but have no problems in classic nerd nor webos :/

As a temporary fix, try an app named SoundAbout.

[Q] Speaker mystery

Hello everyone. A few days ago I started having a problem with my cappy, and I can't put my finger on the cause.
My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
In short, Working: In-call loud speaker, sms and calls.
Not working: everything else - music, alarm clock, in-call sound.
In summery, I can't decide if it's a software or a hardware problem.
I'm running CM 10.1 M2 with devil 4.2.
I should also note that I disassembled my phone to try and apply the
"loosen the screw" fix on the speaker assembly with no luck, nothing changed.

I think both. Earpiece and speakers are different devices.
Hardware - earpiece, software - speakerphone alarms, music etc.
One simple idea: take a piece of something thin, like needle and clean 3.5mm port.
I had almost-same issue 1 year ago. just dust formed wool and began shorting contacts inside port.

Yuna said:
I think both. Earpiece and speakers are different devices.
Hardware - earpiece, software - speakerphone alarms, music etc.
One simple idea: take a piece of something thin, like needle and clean 3.5mm port.
I had almost-same issue 1 year ago. just dust formed wool and began shorting contacts inside port.
Click to expand...
Click to collapse
Thank you for the reply. Let me get this straight, you suggest I clean the 3.5mm port even though earphones work fine? (I haven't mentioned this but with earphones, everything works properly).

earphones = headphones = ear plugs? no, not this.
> My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
Your phone has 2 speakers - front, and back.
As i understand, your front speaker (for usual calls) is malfunctioning.
And if you turn SpeakerPhone in call, then you can hear oponent?
Try to clear port, this wont hurt. But might fix issue. You don't need to disassemble phone, wooden match will do too for cleaning.
Just nothing wet, and don't do rough movements inside port.
It's a bit fragile.

gosha100 said:
Hello everyone. A few days ago I started having a problem with my cappy, and I can't put my finger on the cause.
My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
In short, Working: In-call loud speaker, sms and calls.
Not working: everything else - music, alarm clock, in-call sound.
In summery, I can't decide if it's a software or a hardware problem.
I'm running CM 10.1 M2 with devil 4.2.
I should also note that I disassembled my phone to try and apply the
"loosen the screw" fix on the speaker assembly with no luck, nothing changed.
Click to expand...
Click to collapse
When it happened to me I had to re-seat the ribbon going from the speaker to the sim board. it is very sensitive and I had to do it twice before I got connection back....i just banged the phone around too much and the ribbon lost contact....After the ribbon is seated correctly then just don't tighten that screw too much as it will unseat the ribbon again.

So, gosha.
Anything fixed?

I did as you suggested Yuna, I tried cleaning the 3.5mm port but I'm afraid it had no effect.
Then I disassembled the phone again and as Rmntruexjr suggested, I tried re-seating the ribbon connecting the speaker module to the circuit board several times while the phone is turned on and I'm trying to play music throughout the ordeal. That didn't help either. As previously, ringers work and the loud speaker works but alarm clock, music and the front speaker for calls do not.
Does anyone know if the music and alarm clock are being played by the front or back speaker?
If they are played by the front speaker then the problem is obviously a malfunction in the front speaker and I should just get a new one. Otherwise, there is something weird going on and the back speaker only plays some of the sound and then I can't explain it.

music is played from back speaker.
stupid q: did you checked volume levels?

Yuna said:
music is played from back speaker.
stupid q: did you checked volume levels?
Click to expand...
Click to collapse
Yup. Just to make sure, we are talking about System Settings -> Sound -> Volumes?
However, your question has just made me recheck all the settings and apparently the alarm clock does work!
The current situation is music and front speaker in-call sound doesn't work, but back speaker in call sound works and so do all of the ringers, notifications and alarms.

So, if you play music - no go? Try volume buttons in-playing.
There are 4 different volumes, and 1 hidden.
Front speaker might be broken. Try stock rom, if not helping - service.
And also in call try to adjust volume.
Try kernel with/without voodoo sound. Install/uninstall voodoo sound.

Yuna said:
So, if you play music - no go? Try volume buttons in-playing.
There are 4 different volumes, and 1 hidden.
Front speaker might be broken. Try stock rom, if not helping - service.
And also in call try to adjust volume.
Try kernel with/without voodoo sound. Install/uninstall voodoo sound.
Click to expand...
Click to collapse
No go on the music, same with the volume buttons in call.
As for the kernel, I don't think there is a voodoo and cmc version for the 4.2 Devil kernel (for whatever reason), I only found one version of it - set me straight if i'm wrong.
I'll try rolling back and flashing CM 10.0, i'll see if it helps and report back.
Servicing the phone here is probably out of the question since i897's don't exist in my country, only i9000's so if it comes down to hardware, i'll just order a new speaker module from ebay and install it myself.

But to order, you must be sure its speaker itself.
Sounds like software issue now...
Crazyness...
Рус?

I'm actually surprised the ribbon trick didn't work. I know your issue sounds messed up, but what you describe is detail for detail what I was seeing. It made no sense what so ever to me how for instance no front speaker in call but still speaker phone worked, but then no music, yet alarm works....(i think the ribbon can lose contact on just the right side so you only get some things working).
Sorry it didn't work for you, but it might be worth it to try again if you exhaust all other possibilities. If you do, keep the phone off while trying to seat the ribbon(and make sure the little black fastener is all the way open(up) when inserting the ribbon). Then to test without putting it all back together I used an elastic to hold the battery and tested that way........
If it really does turn out to be the front speaker/jack/sensor unit, I found one last month on ebay for around $2 for a cappy with a bad Jack and it was fairly easy to replace.

For what it's worth, mine stopped working the other day for no reason. Hit it, and now it works. Just something to try (not too hard of course, just a light tap on the hand )

x0ne215 said:
For what it's worth, mine stopped working the other day for no reason. Hit it, and now it works. Just something to try (not too hard of course, just a light tap on the hand )
Click to expand...
Click to collapse
Same issue....That is how mine started...I dropped it one day then I went to play music and the sound would just cut out for no reason it seemed...I could shake or tap on the phone and it would come back on for a while, then nothing again....for me, it was the speaker ribbon.

Ahh that's kinda crappy (no pun intended). As soon as I hit mine, it worked the whole time the phone wasn't bricked .
PS I keep getting outbid on these alltechwholesale auctions by the same guy -_-"

x0ne215 said:
Ahh that's kinda crappy (no pun intended). As soon as I hit mine, it worked the whole time the phone wasn't bricked .
PS I keep getting outbid on these alltechwholesale auctions by the same guy -_-"
Click to expand...
Click to collapse
lol, it's not me I swear....:angel:

You suck lol, thought I'd have an easy fix one with just a bad speaker which I happen to have a working spare for! Damn lol.
Anyway, OP, if you continue to have a speaker problem, did you try swapping it out for a spare one?

Yuna said:
But to order, you must be sure its speaker itself.
Sounds like software issue now...
Crazyness...
Рус?
Click to expand...
Click to collapse
So, I rolled back to CM 10.0 and no change, which means that it's probably a hardware issue, albeit, a very weird one.
And no, Israel.
rmntruexjr said:
I'm actually surprised the ribbon trick didn't work. I know your issue sounds messed up, but what you describe is detail for detail what I was seeing. It made no sense what so ever to me how for instance no front speaker in call but still speaker phone worked, but then no music, yet alarm works....(i think the ribbon can lose contact on just the right side so you only get some things working).
Sorry it didn't work for you, but it might be worth it to try again if you exhaust all other possibilities. If you do, keep the phone off while trying to seat the ribbon(and make sure the little black fastener is all the way open(up) when inserting the ribbon). Then to test without putting it all back together I used an elastic to hold the battery and tested that way........
If it really does turn out to be the front speaker/jack/sensor unit, I found one last month on ebay for around $2 for a cappy with a bad Jack and it was fairly easy to replace.
Click to expand...
Click to collapse
I didn't realize earlier that you had the EXACT same problem so I'll give it another go. It's a good idea with the rubber band, I had to hold the battery throughout the ordeal last time. Even if I order one of these units on ebay now, it'll take about a month to arrive.
x0ne215 said:
You suck lol, thought I'd have an easy fix one with just a bad speaker which I happen to have a working spare for! Damn lol.
Anyway, OP, if you continue to have a speaker problem, did you try swapping it out for a spare one?
Click to expand...
Click to collapse
I'm afraid I tried everything I could which relates to the common Cappy speaker malfunction, that's not it i'm afraid.
I spent 10 days in the desert prior to this malfunction so it's very possible sand caused something (there is sand inside the phone ) or I may have dropped it or something. I didn't want to mention this earlier so I don't throw you guys off straight into a hardware issue.

Well imo hardware is usually an easy fix, so long as it's not the main board (at that point it'd make more sense to just buy a new phone). Open the phone up (don't be scared, there's a tear-down guide on this section w/ pictures), take a can of compressed air, and lightly go over all of the parts inside the phone. Take care not to knock anything out of place. You may also want to re-connect all of the ribbon cables, just in case one came loose (very VERY high possibility). If you need any extra help you can pm me here or shoot me an email (I work in IT and do hardware repairs all the time ).

Phone is not outputting through speakers anymore?

For some reason, my phone seems to think that I have headphones connected all the time. If i plug headphones in, I get sound through them, but once I unplug them, it still carries on as if they weren't taken out (Poweramp pauses on headset disconnect - which it isn't), I have tried rebooting and it has had no effect. I'm on Crystal PA, if that helps. I have no idea whats triggered this, Ive been using Poweramp player on all my androids for a long time, I doubt the app is causing it. The speakers are just not switching back on after the headphones have been removed.
Could this be a hardware problem?

Probably. Are you using Viper Audio or have the FauxSound app installed? Check those apps.

Bruno_Puzoni said:
Probably. Are tou using Viper Audio or have the FauxSound app installed? Check those apps.
Click to expand...
Click to collapse
Aha, never thought about that, I know Crystal PA has viper installed but Im not using it, I was using MusicFX, Ive switched to viper and installed the viper driver and i got sound out of the speaker for a few seconds then it went back to thinking there's headphones connected. This is such a random problem! I havnt touched any of the audio settings since I installed this rom about 2-3 weeks ago, just left things on default.
I think im going to have to wipe and reinstall a ROM and see if that fixes it, i semi messed up this install by trying out the Supercharger script which seems to have made my UI even more flakey rather than improving it.
I really dislike how every ROM Ive tried out on this phone lasts for a few weeks before it gets glitchy with UI crashes and general slowness. And this is not a dig at the devs at all, its not their fault, there is just something deep in this phone which seems to screw it up. The temptation to drive an axe through this phone is growing!

So I've just gone into recovery, wiped system, factory reset and wiped dalvik cache, installed FXP349 CM11 and the same issue is there, sound just wont stop outputting through the headphones, if I turn the ringer volume up, the phone outputs through the speakers, but if i get a call, the phone ignores the earpiece and automatically uses the headphones port to output (doesnt matter if the headphones are actually plugged in or not). I have to switch to speakerphone to hear what people are saying (it sounds very bad quality).
So i guess this means its a hardware problem, Im going to have to try and open up the phone, see if i can see anything broken in there.
Does anyone have experience with any of this?

user154 said:
This may sound stupid but its not just a bit of crap thats been compacted into the jack? I am having the same problem and suspect that may be the cause. I have had this problem before with a phone, but tried to get the foreign material out of the jack with a pin, I ended breaking the jack by pulling part of it out along with whatever was in there. I haven't attempted to clean out my sp's jack yet but am sure thats what it is.
Click to expand...
Click to collapse
Well this was my first idea, I tried spraying compressed air into the jack hole but nothing came out, I also tried a cotton swab in the hole - again nothing. I cant see anything foreign in the hole, so Im thinking the port itself is broken in someway, outputs fine but the port just isn't detecting me unplugging headphones. Ive looked at a dis-assembly guide but it means taking off bits of protective film which I don't know if you can just stick them back on.
Im going to make a nandroid backup of my phone in its current state on the latest CM build and then try going back to original Sony software with an FTF, just to see being put back to stock state will change anything. (my friend thinks its some kind of low level software problem). I dont have high hopes but its worth a shot.
EDIT: So moving back to full stock Sony software with an FTF of 12.1.A.1.205 firmware has had no effect, this must mean its a hardware issue.

So weirdly today, after plugging my phone into a car aux cable and playing some music through it, it magically fixed itself? it snowed a bit the other night and i got pretty soaked by it cycling to work so I think it could have been moisture in the phone or something, its the only explanation I can think of. Its working again now.