[Q] Back to stock from NX5CM (XT1052) - Moto X Q&A

Hi guys
i'd like to go back to stock from NX5CM and i have a XT1052.
Should a just do:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
I'd like to flash stock 4.4.4 XT1052
thanks guys!

just did it like i wrote above, it worked just fine

Not any different from the return to stock guide. Not sure why you thought your X would be any different.

i would consider skipping... fastboot oem config carrier vzw since you don't have a Verizon device.
Also, consider using mFastboot instead of fastboot for all commands.

daede86 said:
just did it like i wrote above, it worked just fine
Click to expand...
Click to collapse
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!

bryan.huang said:
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!
Click to expand...
Click to collapse
Check here http://sbf.droid-developers.org/phone.php?device=0

bryan.huang said:
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!
Click to expand...
Click to collapse
See -> http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347 it has several places to look

daede86 said:
Hi guys
i'd like to go back to stock from NX5CM and i have a XT1052.
Should a just do:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
I'd like to flash stock 4.4.4 XT1052
thanks guys!
Click to expand...
Click to collapse
Can u try RSD lite directly there no problem i was using rsd for my moto x.

Related

[Q] explanations of the files in Moto X roms?

Hi, I'm new to Moto Android phones and want to know what does the files in moto roms and what are these steps mean. Any expert can help explain? Thank you very much!!!
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear

Official 5.1 images?

Hi, I'm looking for stock official images of 5.1 (retail .DE)
Anyone ?
borda01 said:
Hi, I'm looking for stock official images of 5.1 (retail .DE)
Anyone ?
Click to expand...
Click to collapse
You wont see them until after they have pushed officially.
And then, any Developer XT1053 or XT1060 images will get posted to Moto's web site -> https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
In case you don't wanna use RSD Lite/You own a Mac:
MANUAL FLASHING
Much easier AND don't have to deal with getting RSD Lite to work....
Note - this was done on VZW variant, and based on XML file of that particular firmware. Get these instructions from your firmware package XML file.
Note 2 - VERY IMPORTANT!!! - You MUST use mfastboot (Moto fastboot) for the system.img flash as its too large for standard Android fastboot to handle, your flash WILL fail if you use standard fastboot. Hence why it says "mfastboot" this is not a typo.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
Note: this is all done using fastboot/mfastboot/adb manually on your command prompt/terminal.
Good luck.

Unable to Relock Bootloader and SIM card NOT READING error on MOTO X 2014 AT&T XT1097

Unable to Relock Bootloader and SIM card NOT READING error on MOTO X 2014 AT&T XT1097
i have unlocked bootloader on my moto X 2014 (canada variant) XT1097 and status code : 3
after flashing stock roms & many attempts to relock the bootloader but no luck to lock my phone bootloader
with this cmd in the fastboot mode.
{
fastboot oem lock
(bootloader) FAIL: Please run fastboot oem lock begin first!
(bootloader) sst lock failure!
} (this statment also shows to flash any signed img (i dont know what it means))
as well as while i am flashing rom i got this errors
{
hab check failed for recovery
hab check failed for boot
} in pink colour
my phone is unable to read sim card (NO Network)
can anyone suggest any solution.
maninder.email said:
i have unlocked bootloader on my moto X 2014 (canada variant) XT1097 and status code : 3
after flashing stock roms & many attempts to relock the bootloader but no luck to lock my phone bootloader
with this cmd in the fastboot mode.
{
fastboot oem lock
(bootloader) FAIL: Please run fastboot oem lock begin first!
(bootloader) sst lock failure!
} (this statment also shows to flash any signed img (i dont know what it means))
as well as while i am flashing rom i got this errors
{
hab check failed for recovery
hab check failed for boot
} in pink colour
my phone is unable to read sim card (NO Network)
can anyone suggest any solution.
Click to expand...
Click to collapse
If you're using your ATT XT1097 with a Canadian carrier, then you need to flash the VICTARA_RETCA_XT1097_6.0 firmware:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Every single line, so that ALL files are stock. There's no advantage to relocking the bootloader, you won't get warranty back. But try relocking it after flashing the full factory firmware.
Gus Ghanem said:
If you're using your ATT XT1097 with a Canadian carrier, then you need to flash the VICTARA_RETCA_XT1097_6.0 firmware:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Every single line, so that ALL files are stock. There's no advantage to relocking the bootloader, you won't get warranty back. But try relocking it after flashing the full factory firmware.
Click to expand...
Click to collapse
yahoo! Phone is able to read my Wind sim card and i am able to make phone calls.
Thanks Gus Ghanem
I really appreciate your help
i followed your instructions.
maninder.email said:
yahoo! Phone is able to read my Wind sim card and i am able to make phone calls.
Thanks Gus Ghanem
I really appreciate your help
i followed your instructions.
Click to expand...
Click to collapse
You're welcome! I'm glad it's working

Return to Stock? XT1097 RETCA

I was wondering how I would return my moto x to stock firmware. Am I just able to flash the stock firmware files? If so, can anyone provide the latest retca 6.0 firmware files for xt1097 as I don't want to FUBAR my device. If it counts for anything, I was on MPE24.49-18 marshmallow.
Kevin_Desousa said:
I was wondering how I would return my moto x to stock firmware. Am I just able to flash the stock firmware files? If so, can anyone provide the latest retca 6.0 firmware files for xt1097 as I don't want to FUBAR my device. If it counts for anything, I was on MPE24.49-18 marshmallow.
Click to expand...
Click to collapse
Download it:
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/XT1097/
Extract it, and flash it with Fastboot:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot

MetroPCS Moto e5 play xt1921-3 baseband / imei missing

Attempted to root & install TWRP, went to revert to stock, through about 6 different ROM variants for this phone, none of which have restored either the imei or baseband, some help/ insight would be amazing right about now
Did you ever figure this out, if not i can help you, i have had to restore both of them about 50 times, and i have an automated way of doing it, at this point. hit me up if you still need help.
for those having this problem, this is only for the MetroPCS variant xt1921-3 James model, flash back to stock build JAMES_T_OCP27.91-150-5-1_cid21_subsidy-MPCS_RSU_regulatory-DEFAULT_CFC from the bootloader using these commands -
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash dsp adspso.bin
fastboot flash bootloader bootloader.img
fastboot flash recovery recovery.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot erase DDR
fastboot erase cache
fastboot erase userdata
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot oem fb_mode_clear
fastboot reboot
- after you flash and reboot, it will boot up normally, setup up a wifi connection on it and it will tell you there is a new security update. Let it download and install the update, once finished, it will boot up and your baseband and IMEI will be working again.
What did you do to mess those up? I just got this phone, used to love doing this stuff, but it's become such a pain in the a$$ to just use a device I paid for like I want. I don't want that kind of problem. On a Samsung, that problem woud occur if your baseband and modem didn't match properly and the fix was to reflash the correct ones. Might not help you in this case tho.
Sent from my [device_name] using XDA-Developers Legacy app

Categories

Resources