Related
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan
Can someone take the miui room that is working for L07 and L10 and change the sim functionality so it works with the dual sim slots.
I have flashed the other versions and it all works except for :
- I get a recurring message saying com.android.phone has unfortunately stopped.
- and it doesn't read that I have a sim card.
I am happy to test and report.
Thanks in advance
mickeyg13 said:
Can someone take the miui room that is working for L07 and L10 and change the sim functionality so it works with the dual sim slots.
I have flashed the other versions and it all works except for :
- I get a recurring message saying com.android.phone has unfortunately stopped.
- and it doesn't read that I have a sim card.
I am happy to test and report.
Thanks in advance
Click to expand...
Click to collapse
Dual sim: http://pan.baidu.com/wap/link?uk=2936987094&shareid=2626011361&third=0
Thanks. Will try it tonight and report back
Be careful. P7-L00 is China Unicom version, P7-L07 is China Mobile version and P7-L9 is China Telecom version, these are all dual-SIMs or single SIM with SDCard.
The LTE and WCDMA are different for these versions.
I don't think their ROMs are interchangeable unless the author can make a ROM worked for all three phone versions.
So....anyone test it on L00?? i have also L00 and i want to change in miui,...
moviehunter2009 said:
So....anyone test it on L00?? i have also L00 and i want to change in miui,...
Click to expand...
Click to collapse
http://pan.baidu.com/wap/link?uk=2936987094&shareid=3941109677&third=0
Superwitschi said:
http://pan.baidu.com/wap/link?uk=2936987094&shareid=3941109677&third=0
Click to expand...
Click to collapse
Thanks my friend....i just saw your reply....ill try it. Well now i see it takes toooo ong to download....1 day 14 hours??? is there any other link??
The thing is that i flashed that one using CWM v 6.0.5.0 recovery
And when i reboot i get into bootloop, i dont know why, i putted my phone on bootloader mode and it says "bootloader unlocked".
i dont know what else could be, Do i've to preinstall a BXXX version before flashing that one?
Hello,
my moto voice stopped working and even a factory reset didnt help. So I unlocked my bootloader and everything from the Rom I downloaded. I got an error upon flashing the modem, but the script sadly still deleted modemst1 and 2. Everythng works now, except the phone is now Brasilian and I have no signal whatsoever. My Moto is a XT1092 if it helps. Help would be much appreciated
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
beelzebu said:
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
Click to expand...
Click to collapse
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
I doubt it is broken. But it may not work until you find a stock original ROM to flash. Maybe you should look for a UK or FR ROM , I believe there is only one ROM for xt1092, not a specific German one. It might be called EU ROM, but I haven't searched for it.
Judge584 said:
I doubt it is broken. But it may not work until you find a stock original ROM to flash. Maybe you should look for a UK or FR ROM , I believe there is only one ROM for xt1092, not a specific German one. It might be called EU ROM, but I haven't searched for it.
Click to expand...
Click to collapse
The Build that was running on it before definitely ended in DE. But I will keep searching for it. Do you think I should send it to a repari center and risk paying a lot of money, or should I just wait until a German Rom is released somewhere? I mean, Android L at least should fix it right up again.
Because you are not stock you won't be able to update it to lollipop... For the repair center you are the only one to be able to answer that question
Judge584 said:
Because you are not stock you won't be able to update it to lollipop... For the repair center you are the only one to be able to answer that question
Click to expand...
Click to collapse
I am stock, I actually managed to get my TWRP Backup back on the phone, so im on a German Rom again. Still, the modem doesnt work, as TWRP doest back that up.
I see... You have to find a stock radio and to flash it again.
I think someone with unlocked bootloader can probably extract it for you?
Judge584 said:
I see... You have to find a stock radio and to flash it again.
I think someone with unlocked bootloader can probably extract it for you?
Click to expand...
Click to collapse
Yes exactly. I do not know how someone can extract the radio though...
I hope, Android L will flash a new modem. If that would be the case, my problem would be solved
Yes but again: if your modem not stock then no android L for you.
Judge584 said:
Yes but again: if your modem not stock then no android L for you.
Click to expand...
Click to collapse
I know that, but I guess there will be someone who can grab the OTA and i can flash it manually
Good guess you're right. But I suggest you to ask someone with a xt1092 and an unlocked bootloader to extract radio for you, ask it in the dev section.
This thread you should follow : http://forum.xda-developers.com/showthread.php?p=56392284
Judge584 said:
This thread you should follow : http://forum.xda-developers.com/showthread.php?p=56392284
Click to expand...
Click to collapse
Tanks! I just found out, that i have no IMEI and my EFS Partition is probably screwed. Do you know of any way to restore that to stock?
Efs partition ? Unfortunately not
---------- Post added at 11:16 AM ---------- Previous post was at 10:38 AM ----------
This thread might help you : http://forum.xda-developers.com/showthread.php?t=1308546
Radixtrator said:
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
Click to expand...
Click to collapse
Goodnight[emoji14]
beelzebu said:
Indeed yo may killed to modem/radio, probably your carrie does not support the same bands as the retail brazil carrier. Which carrier are you?, all gsm bands still may work unless you have CDMA.
Regards
Click to expand...
Click to collapse
have you been able to resolve this? I basically did the same thing and removed my modemst1 and modemst2 as well..
Can you send me link for US stock firmware please
Radixtrator said:
Im currently using o2 germany. Just got off the phone with the Repair company and they said if i have root or unlocked bootloader its fubar and they wont repair it. WTF....i found brazil or us stock firmwares, but no german one...
Click to expand...
Click to collapse
Hey man ive been looking around for the US stock firmward, could you please let me know where you saw it?
Thanks
veekta said:
have you been able to resolve this? I basically did the same thing and removed my modemst1 and modemst2 as well..
Click to expand...
Click to collapse
Had to RMA the phone..
Hi. I'm currently on CM12 and I have been facing this problem(?) for a while now. Back when I was on stock 4.4.2, most of the time my phone is stuck on EDGE when I'm using my primary sim card (network A). In order to get 3G/4G signal, I have to explicitly choose a network operator. After a while, it reverts back to EDGE so I have to do that again. However, using my other sim (network B) doesn't have this problem. Now that I'm on CM12, I'm still facing the same issue. I can't use that fix since I think there's a problem with the rom itself when choosing the network. I'm thinking either this is a network error or a problem with the modem itself. I'm currently on NF1 and I'm wondering how to upgrade my modem to the latest one. Thanks!
Why switch modem if you think it's an issue with ROM?
Prerequisites to CM say nothing which modem you must have or that any of them are not good. CM don't change either bootloader, GSM or LTE modem.
CM provide RIL to communicate with modems.
QualComm based CM hasn't been able to manually search carrier since Aug 2014 https://jira.cyanogenmod.org/browse/CYAN-4902 and perhaps the decision to de-unify S4 CM can resolve this for Lollipop within a time frame of 3 months. [emoji12]
Please inform if you can find any chance log of what's fixed for different modem versions.
Bevare the Thanks Button
O-T said:
Why switch modem if you think it's an issue with ROM?
Prerequisites to CM say nothing which modem you must have or that any of them are not good. CM don't change either bootloader, GSM or LTE modem.
CM provide RIL to communicate with modems.
QualComm based CM hasn't been able to manually search carrier since Aug 2014 https://jira.cyanogenmod.org/browse/CYAN-4902 and perhaps the decision to de-unify S4 CM can resolve this for Lollipop within a time frame of 3 months. [emoji12]
Please inform if you can find any chance log of what's fixed for different modem versions.
Bevare the Thanks Button
Click to expand...
Click to collapse
As I've said, this issue is also present when I was still on touchwiz/stock rom. And as you said, CM doesn't change the modem so the issue might be with the modem itself so I'm planning on upgrading to the latest one. Problem is, I don't know how to.
Just to be clear, I'm on EDGE most of the time on Network A on both CM12 and stock touchwiz rom. On Network B, I normally get HSPA+.
VIPNobie said:
As I've said, this issue is also present when I was still on touchwiz/stock rom. And as you said, CM doesn't change the modem so the issue might be with the modem itself so I'm planning on upgrading to the latest one. Problem is, I don't know how to.
Just to be clear, I'm on EDGE most of the time on Network A on both CM12 and stock touchwiz rom. On Network B, I normally get HSPA+.
Click to expand...
Click to collapse
You should use the modem based on the country that you are using the phone as the bands available in each country and those included in the modem differ else you may have network issues, for more info refer to this post
JASONRR said:
You should use the modem based on the country that you are using the phone as the bands available in each country and those included in the modem differ else you may have network issues, for more info refer to this post
Click to expand...
Click to collapse
Based from this, I need the modem that works with 1800/2500/2600 bands. I'm currently on NF1 and I have no clue which other modem works with the said bands. Help please?
VIPNobie said:
Based from this, I need the modem that works with 1800/2500/2600 bands. I'm currently on NF1 and I have no clue which other modem works with the said bands. Help please?
Click to expand...
Click to collapse
Get the Switzerland one, link is in the the OP of the same ROM thread
JASONRR said:
Get the Switzerland one, link is in the the OP of the same ROM thread
Click to expand...
Click to collapse
Thank you! One question though, should I flash NI1_AUT_wifi_150107.zip as well? I'm not sure if that only applies if I'm on the WizCyan rom.
Just in case something wrong happens, if I go back to the stock rom using odin, will it revert back to the original modem?
VIPNobie said:
Thank you! One question though, should I flash NI1_AUT_wifi_150107.zip as well? I'm not sure if that only applies if I'm on the WizCyan rom.
Just in case something wrong happens, if I go back to the stock rom using odin, will it revert back to the original modem?
Click to expand...
Click to collapse
Yes, the zip file applies to WizCyan ROM.
If you flash firmware the modem is included so yes it will revert to the modem in the firmware
JASONRR said:
Yes, the zip file applies to WizCyan ROM.
If you flash firmware the modem is included so yes it will revert to the modem in the firmware
Click to expand...
Click to collapse
Thank you so much! Will update if it works.
Edit: Successfully flashed the modem but I'm still stuck on EDGE. Oh well. At this point I don't what's the problem; is it my phone or the network?
So I managed to make it work by fiddling with the APN.
Hello guys,
i flashed stock 5.02 6.23.651.10 on my HTC One Sprint. I live in Germany and everything works but i only get GSM all the time. i tried same sim cards on other devices and had 3g/ LTE and also other sim-cards.
Baseband Version: 1.02.20.0922
How can i fix this?
Do i have to flash another Baseband?
Thanks
Fabian
serioux said:
Hello guys,
i flashed stock 5.02 6.23.651.10 on my HTC One Sprint. I live in Germany and everything works but i only get GSM all the time. i tried same sim cards on other devices and had 3g/ LTE and also other sim-cards.
Baseband Version: 1.02.20.0922
How can i fix this?
Do i have to flash another Baseband?
Thanks
Fabian
Click to expand...
Click to collapse
Hi, me too, I have the same problem. Do you fix it ?
Ankoay said:
Hi, me too, I have the same problem. Do you fix it ?
Click to expand...
Click to collapse
This is a CDMA device ,so using with a global SIM with show it as GSM since its in GSM mode which supports upto HSDPA, if u need 3G icons u need to root and phone and follow this one http://forum.xda-developers.com/showthread.php?t=2594804