Database Develop

QuickWindow not working with "NILLKIN LG G2 Fresh Series Leather Case"

Hi, i recently bought a "NILLKIN LG G2 Fresh Series Leather Case" from a vendor. Accordin to the pictures and the specs the QuickWindow feature should work, but its not... The feature is acitvated in the phones setttings but theres no reaction to the screen when i swipe in the little window. Does anyone have a suggestion how to solve this? Does only the LG G2 retail accessories work proper with this feature? Are there any custom-rom features that could solve this? Cheers!

spinxen said:
Hi, i recently bought a "NILLKIN LG G2 Fresh Series Leather Case" from a vendor. Accordin to the pictures and the specs the QuickWindow feature should work, but its not... The feature is acitvated in the phones setttings but theres no reaction to the screen when i swipe in the little window. Does anyone have a suggestion how to solve this? Does only the LG G2 retail accessories work proper with this feature? Are there any custom-rom features that could solve this? Cheers!
Click to expand...
Click to collapse
I have the LG quick window case and it works perfectly well.
On closer inspection of the case it looks like there is a circular chip embedded within the back of the front case and I guess its that chip which then enables the software on the LG G2 to display the reduced visible window area.
Therefore I guess no other cases will work unless its the official case?

there is a setting for it under general > accessory

Make sure the embedded magnet in the cover is lined up with the left side of the screen about 1/3 of the way down, that's where the sensor is.
Sent from my LG-D801 using XDA Premium HD app

murdoch1 said:
I have the LG quick window case and it works perfectly well.
On closer inspection of the case it looks like there is a circular chip embedded within the back of the front case and I guess its that chip which then enables the software on the LG G2 to display the reduced visible window area.
Therefore I guess no other cases will work unless its the official case?
Click to expand...
Click to collapse
It's just a magnet.

BTW, get a better case (other than quick window). Just dropped mine from about 3 feet and it not only bounced, but popped off with no problem. My precious now has battle damage. On top of that, it appears to affect certain screen protectors. Even after cleaning the screen protector, the area of the window has an outline and gathers debris easier.

spinxen said:
Hi, i recently bought a "NILLKIN LG G2 Fresh Series Leather Case" from a vendor. Accordin to the pictures and the specs the QuickWindow feature should work, but its not... The feature is acitvated in the phones setttings but theres no reaction to the screen when i swipe in the little window. Does anyone have a suggestion how to solve this? Does only the LG G2 retail accessories work proper with this feature? Are there any custom-rom features that could solve this? Cheers!
Click to expand...
Click to collapse
which device are you using? (D800? D801? D802? etc)

Nillkin Case works
I use it and it works
I made Pictures....
I bought it here, but three weeks lasted until it was there
http://www.ebay.at/itm/271297807271?var=570199864991&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

yeah thread owner you should change title
Sent from my LG-D802

bachera said:
yeah thread owner you should change title
Sent from my LG-D802
Click to expand...
Click to collapse
Well this is 10x cheaper than LGs one, just but it for the heck of it, is it a lot crappier than the original?

It really upsets me that there is no unofficial quick window case for Verizon's version.

Another Nillkin case working on T-mobile D801 LG G2
letschky said:
I use it and it works
I made Pictures....
I bought it here, but three weeks lasted until it was there
http://www.ebay.at/itm/271297807271?var=570199864991&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
:good:I also bought the Nillkin Flip PU Leather Cover Matte Hard Back Case that works perfectly with Quick Window - color = white...I also have the case shown above by user letschky
it works great with no problems.
Bought it here http://www.ebay.com/itm/131029587635?_trksid=p0.m570.l4467&_trkparms=gh1g%3DI131029587635.N19.S2.M-18829

Case works well
I picked up one of these cases from Amazon and can confirm it works as intended. The window shows the clock when the case is shut and then again when the power button is hit or a call comes in. The only downside I can see right now if the lack of a hole for the notification light. I plan on making a hole for the light when I get home with a hot nail.

Hi,
Planning to get the same case, but having second thought. Does it bother you that the case does not have hole for the notification? BTW, is the back cover feel nice, and grippy?
Thank you,
Urbanrootz said:
:good:I also bought the Nillkin Flip PU Leather Cover Matte Hard Back Case that works perfectly with Quick Window - color = white...I also have the case shown above by user letschky
it works great with no problems.
Bought it here http://www.ebay.com/itm/131029587635?_trksid=p0.m570.l4467&_trkparms=gh1g%3DI131029587635.N19.S2.M-18829
Click to expand...
Click to collapse

oct_7 said:
Hi,
Planning to get the same case, but having second thought. Does it bother you that the case does not have hole for the notification? BTW, is the back cover feel nice, and grippy?
Thank you,
Click to expand...
Click to collapse
The lack of a notification hole was easy to fix, I just expanded the hole for the speaker. The material is vinyl cover cardboard? so it did not melt as expected. I ended up taking a fine blade and cutting the space I wanted. This left ugly white edges so I colored it in with a marker as well as the window edges. If you have a small craft punch it would make a nice, clean hole.
The case is better in the hand than the bare phone. The back is smooth, but seems more grippy than the naked phone. I usually folder over the case when holding it so it helps with the grip as well.

oct_7 said:
Hi,
Planning to get the same case, but having second thought. Does it bother you that the case does not have hole for the notification? BTW, is the back cover feel nice, and grippy?
Thank you,
Click to expand...
Click to collapse
:good: No it does not bother me at all, for some it might.......wasn't a deal breaker for me at all...The case is very grippy, nice texture to the back, I think I posted a picture with a close up of the back.

Thanks. I placed my order yesterday. Let's what I will do with LED hole. It is just weird I think that they did not consider that.
metapy said:
The lack of a notification hole was easy to fix, I just expanded the hole for the speaker. The material is vinyl cover cardboard? so it did not melt as expected. I ended up taking a fine blade and cutting the space I wanted. This left ugly white edges so I colored it in with a marker as well as the window edges. If you have a small craft punch it would make a nice, clean hole.
The case is better in the hand than the bare phone. The back is smooth, but seems more grippy than the naked phone. I usually folder over the case when holding it so it helps with the grip as well.
Click to expand...
Click to collapse
Urbanrootz said:
:good: No it does not bother me at all, for some it might.......wasn't a deal breaker for me at all...The case is very grippy, nice textured to the back, I think I posted a picture with a close up of the back.
Click to expand...
Click to collapse

oct_7 said:
Thanks. I placed my order yesterday. Let's what I will do with LED hole. It is just weird I think that they did not consider that.
Click to expand...
Click to collapse
Cheers....It is a bit odd not to consider including the LED hole, but the cool thing is that the LED on the G2 is so bright you will know when its lit.

Urbanrootz said:
:good:I also bought the Nillkin Flip PU Leather Cover Matte Hard Back Case that works perfectly with Quick Window - color = white...I also have the case shown above by user letschky
it works great with no problems.
Bought it here http://www.ebay.com/itm/131029587635?_trksid=p0.m570.l4467&_trkparms=gh1g%3DI131029587635.N19.S2.M-18829
Click to expand...
Click to collapse
Which material is used on the back, it looks kind of grippy like the N5 back, or is it just plastic?
Also, how long did it take to arrive?

Sebz4n said:
Which material is used on the back, it looks kind of grippy like the N5 back, or is it just plastic?
Also, how long did it take to arrive?
Click to expand...
Click to collapse
I think its a textured hard plastic or maybe that TPU material.....it feels really nice in the hand......Shipping was pretty quick and free....surprisingly it took only 2 weeks to deliver from China to the US.

D802 intl + incipio dual pro

I bought this case for my LG D802 Asian, and fits perfect, the size is like my Galaxy S2 + Otterbox, less bulky than an Otter.
I like the black mate and the phone doesn´t slip so easy like when it doesn´t have the case

The case box

Thanks you for the pics!
Do you have screen protector on it?

evasi0n said:
Thanks you for the pics!
Do you have screen protector on it?
Click to expand...
Click to collapse
There is no need of screen protector in this phone, it has Gorilla glass 2.

can you make picture with phone next to it, front and side on flat service?
Sent from my LG-D802

can you post pic of the usb port of the bottom? how big is the cut out?

bachera said:
can you make picture with phone next to it, front and side on flat service?
Sent from my LG-D802
Click to expand...
Click to collapse
The second picture is with the phone near the cover, to have an idea, the G2 with this cover is near the same width of my Galaxy S2 with Otter Box and the depth is exactly the same as my S2 with Otter, the lenght is larger because the phone is larger

banditnich said:
can you post pic of the usb port of the bottom? how big is the cut out?
Click to expand...
Click to collapse
Here it is:

Thanks for the pictures. Looks like the cut is quite wide but a llittle bulky...
Because I still looking for a case which can use along with meenova.
Did you happen using meenova?
Sent from my LG-D802 using Tapatalk

banditnich said:
Thanks for the pictures. Looks like the cut is quite wide but a llittle bulky...
Because I still looking for a case which can use along with meenova.
Did you happen using meenova?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I saw meenova, personally I think it will fit ok, its only 1 mm of rubber

Okay thanks for the input citytrader. So if I decided to buy incipio then on their site which carriers should I choose?
I'm using D802 Asian too
Sent from my LG-D802 using Tapatalk

banditnich said:
Okay thanks for the input citytrader. So if I decided to buy incipio then on their site which carriers should I choose?
I'm using D802 Asian too
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I bought it at ebay at this dealer:
http://www.ebay.com/usr/cellcase4u
My experience was great, my cover arrived to Mexico in 6 days, very fast.
Personally I think that any cover that fits G2 T-Mobile, AT&T or Sprint will fit D802.
The customer support of INCIPIO is horrible, I dont understand why because the case is nice, not bulky like Otterbox, I think is enough to protect the phone.
Try to check at ebay or ask directly to INCIPIO where to buy the DUALPRO T- MOBILE variant, the models I saw are colored, personally I prefer black, but is matter of taste!

Okay... thanks.. will contact the seller then

citytrader said:
Here it is:
Click to expand...
Click to collapse
Yikes, seems like the rubber portion attracts lots of dust/lint (top/bottom) of your pics. Maybe I should get the Spigen instead to avoid that.

rebelx said:
Yikes, seems like the rubber portion attracts lots of dust/lint (top/bottom) of your pics. Maybe I should get the Spigen instead to avoid that.
Click to expand...
Click to collapse
It attacts not lot of dust, in the picture seems worse than really it is, if you pass your hand you will clean it easy.
Personally I dont like the Spigen because its bigger and the hole in the flash is so small that could affect the beam and personally I like more the black mate back of Incipio.

citytrader said:
It attacts not lot of dust, in the picture seems worse than really it is, if you pass your hand you will clean it easy.
Personally I dont like the Spigen because its bigger and the hole in the flash is so small that could affect the beam and personally I like more the black mate back of Incipio.
Click to expand...
Click to collapse
Good point about the flash. I read about it earlier somewhere on this forum, but I didn't think much of it. If the flash isn't properly dispersed, it may very well affect picture quality.
I'm planning on getting the white dual pro to match my white G2 that I'll be ordering soon. Hopefully the grey rubber bottom doesn't show dust/lint as much. I'm mainly concerned not with it being there, but that it might constantly be getting on my hands and may make the case slightly difficult to hold (I had a TPU silicon case for an iPod Touch one time and it was terrible with lint).
Do you think there's enough room on the sides of the case to have a tempered glass screen protector there without experiencing any lifting?

rebelx said:
Good point about the flash. I read about it earlier somewhere on this forum, but I didn't think much of it. If the flash isn't properly dispersed, it may very well affect picture quality.
I'm planning on getting the white dual pro to match my white G2 that I'll be ordering soon. Hopefully the grey rubber bottom doesn't show dust/lint as much. I'm mainly concerned not with it being there, but that it might constantly be getting on my hands and may make the case slightly difficult to hold (I had a TPU silicon case for an iPod Touch one time and it was terrible with lint).
Do you think there's enough room on the sides of the case to have a tempered glass screen protector there without experiencing any lifting?
Click to expand...
Click to collapse
Most of the case is plastic and from my point of view this case is optimal because it does not slip from my hands.
About tempered glass, totally useless in phones with Gorilla Glass and total waste of money, for one side, this type of screen (Gorilla glass) never get an scratch with normal use, for the other this kind of screen degrades the clarity of the G2's wonderfull screen.
I have a Galaxy S2 for two year and still I see one scratch, of course maybe you will found something if you look at the microscope hehehe.... but from the normal eye sight, there is nothing and this is what matter most.

citytrader said:
Most of the case is plastic and from my point of view this case is optimal because it does not slip from my hands.
About tempered glass, totally useless in phones with Gorilla Glass and total waste of money, for one side, this type of screen (Gorilla glass) never get an scratch with normal use, for the other this kind of screen degrades the clarity of the G2's wonderfull screen.
I have a Galaxy S2 for two year and still I see one scratch, of course maybe you will found something if you look at the microscope hehehe.... but from the normal eye sight, there is nothing and this is what matter most.
Click to expand...
Click to collapse
Yea, most likely one doesn't need a screen protector, but even with gorilla glass, I would feel more comfortable with one on there. Never know when I may drop the phone by accident and any additional protection helps. I don't particularly like to see any scratches on my screens, so I know it would bother me if there was on there.
Also, I'd probably get a higher resale value for keeping it in better condition!

OEM Translucent hard shell case?

I just noticed that Best Buy has what appears to be the HTC OEM translucent hard shell case for $14.99. Search for SKU 5641313. Anyone have experience with it? I just ordered, but looks like it'll be over a week 'til delivery.
EDIT:
Case arrived. See here:
http://forum.xda-developers.com/showpost.php?p=52146070&postcount=7

If it's similar to the M7 one that I had it's a nice, minimal case (and it came with a free HTC screen protector as well!)
I take it this is what you're on about?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=258366&phone=259879

Yes, I have one.
Barely notice it's there, which is great, but a few days down the line, the back of the case is already showing some scratches.
Does have a slight lip on the front to protect the screen face-down, though, which is good.
I don't think it'll last long until I cave in and get a DotView to replace it.

I was planning to buy this since I had a similar one for my One X. Then I found this Yesoo case. I got the gray one and really like it. Mine came without the branding on the back too which is nice.
http://www.amazon.com/gp/aw/d/B00IO8WONQ/ref=mp_s_a_1_1?qid=1397832685&sr=8-1&pi=SY200_QL40

http://www.amazon.com/gp/product/B00JAR24SU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I got this one, and its pretty great..adds little by way of size, the back is clear for the beauty of the phone stands out!

Can we get pictures of this case from anyone that owns it? And wondering how it looks
Sent from my HTC One_M8 using XDA Premium 4 mobile app

Bringing this thread back on-topic.
I received my case today and threw it on real quick. I usually don't use cases, so this is for occasions (like on vacation) when I want a little protection from scratches.
This appears to be a first-party case from HTC, with the Product Name on the box listed as HTC HC C942 Hard Shell. It is translucent, as opposed to transparent, so on my Amber Gold M8 the color is definitely muted. It has HTC branding located directly over where HTC is on the back of the phone. The overall feel is good; exact match to the M8's curves with no seams that can be felt. It isn't slippery, but I wouldn't go so far as to call it soft touch.

Looks good! I have both the hoc translucent case and the yesoo case on the way! We'll see which one I like better

chp said:
Bringing this thread back on-topic.
I received my case today and threw it on real quick. I usually don't use cases, so this is for occasions (like on vacation) when I want a little protection from scratches.
This appears to be a first-party case from HTC, with the Product Name on the box listed as HTC HC C942 Hard Shell. It is translucent, as opposed to transparent, so on my Amber Gold M8 the color is definitely muted. It has HTC branding located directly over where HTC is on the back of the phone. The overall feel is good; exact match to the M8's curves with no seams that can be felt. It isn't slippery, but I wouldn't go so far as to call it soft touch.
Click to expand...
Click to collapse
I ordered once cause it was cheap on eBay and I had one on my old M7. Will be interesting to see what it's like against the case that came with the M8 (which I quite like even though it's a little grippy when going into your pocket).
Nice to see some photos of it, gives me confidence in the product. Have you tried the SP that came with it?

EddyOS said:
I ordered once cause it was cheap on eBay and I had one on my old M7. Will be interesting to see what it's like against the case that came with the M8 (which I quite like even though it's a little grippy when going into your pocket).
Nice to see some photos of it, gives me confidence in the product. Have you tried the SP that came with it?
Click to expand...
Click to collapse
I didn't even look at the screen protector, because I've been sold on glass screen protectors for years now. (Although I haven't purchased one for the M8 yet.)
It's hard to say for certain how the screen protector is without installing it, but laying it on the phone, it looks like it covers edge to edge vertically, but not horizontally, leaving maybe .2mm on each side.

I have a Zagg glass sp and I have a kaysone case which is same fit as yesoo case and it fits perfectly the screen bevlels in so it's not going to be an issue ,at least not with zagg

Yes, I have one copy.

chp said:
I didn't even look at the screen protector, because I've been sold on glass screen protectors for years now. (Although I haven't purchased one for the M8 yet.)
It's hard to say for certain how the screen protector is without installing it, but laying it on the phone, it looks like it covers edge to edge vertically, but not horizontally, leaving maybe .2mm on each side.
Click to expand...
Click to collapse
Possibly so it doesn't catch on other cases

Why the heck didn't the Sprint store have this when I bought my M8? They tried to sell me on some clunky $50 Otterbox or something. Ended up ordering a Diztronic TPU case for $10 from Amazon, but I hate how it hides how nice the phone looks. Nonetheless, I've have great luck with Diztronic stuff.

i can find with this item # have the link ??

Cimo s curve
Sent from my HTC One_M8 using Tapatalk

OK, got my one of these. First impressions, perfect fit - like to the mm. Thin but offers nice protection to the phone. Do I prefer it to the one that came with it in the box? I don't know. I prefer the fact I can get to the ports easily BUT I quite liked the fact the one in the box covered the ports so dust won't get in.
SP was easy to fit, and fits well, but it's fingerprint magnet - SO much more so than the screen naked. At least it's covered, though...
I'll give it a few days but might go back to the original case as it offers more grip

Anyone got pics of this on the gunmetal color?
Sent from my HTC One_M8 using XDA Premium 4 mobile app

Gja88 said:
Anyone got pics of this on the gunmetal color?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'll get some in a bit
EDIT: Here you go

its awesome and look good.

Anyone bought Chinese knockoff Dot View Case?

After reviewing several different version of Dot View Case Clone, I ordered mine at Amazon for $10 here http://amzn.to/1uCKago
This one stated that it is using the same material as the HTC version else some other version uses leather front cover with cut out holes which I'm worried that swiping on it wont be as smooth.
Anyone had the leather front cover version? They have some nice colors especially the gold color for my gold M8.

revolve82 said:
After reviewing several different version of Dot View Case Clone, I ordered mine at Amazon for $10 here http://amzn.to/1uCKago
This one stated that it is using the same material as the HTC version else some other version uses leather front cover with cut out holes which I'm worried that swiping on it wont be as smooth.
Anyone had the leather front cover version? They have some nice colors especially the gold color for my gold M8.
Click to expand...
Click to collapse
I purchased this one, http://www.ebay.com/itm/291190318285, which should be here today or tomorrow. It arrived at my post office about an hour ago. I'll post my thoughts here in the next couple days.

Ordered one off eBay. Hopefully it is good but if not eBay does have their guarantee so I think its worth the risk.

henderjr said:
I purchased this one, http://www.ebay.com/itm/291190318285, which should be here today or tomorrow. It arrived at my post office about an hour ago. I'll post my thoughts here in the next couple days.
Click to expand...
Click to collapse
Got this case yesterday. I have a OEM dot view case as well that I broke trying to stretch it. This cover isn't quite as thick/sturdy but other than that I can barely tell a difference between the two. It mentions on the eBay item that it's "Dot View Flip Leather Case" though none of it seems leather to me. I did pull on it a bit to get it to fit on my glass screen protector and it sits almost flush. Better than the OEM case.

henderjr said:
Got this case yesterday. I have a OEM dot view case as well that I broke trying to stretch it. This cover isn't quite as thick/sturdy but other than that I can barely tell a difference between the two. It mentions on the eBay item that it's "Dot View Flip Leather Case" though none of it seems leather to me. I did pull on it a bit to get it to fit on my glass screen protector and it sits almost flush. Better than the OEM case.
Click to expand...
Click to collapse
That looks pretty good. Does it function perfectly as well? What did you do with your broken one? If the actual cover piece is intact, I may be interested in taking it off your hands, haha. I really wish the dot view case covered the right edge of the phone...

xPhantom said:
That looks pretty good. Does it function perfectly as well? What did you do with your broken one? If the actual cover piece is intact, I may be interested in taking it off your hands, haha. I really wish the dot view case covered the right edge of the phone...
Click to expand...
Click to collapse
Yeah it works well. Not as snappy closing and folds over easier than the OEM which I like. I wish they made one that didn't automatically close though. I was hopping the "leather" feature would be the folding side and it would lay open if I wanted it to. OH well. It folds more flat than the original at least.
I have my old one. Basically the cover tore off the back when trying to stretch it to fit over my glass screen protector. I then glued it into a cheap case I got off Amazon and it fit decent but wasn't perfect and the view through the case just seemed off. Here's a couple pictures of my MacGyver'd case.

henderjr said:
Got this case yesterday. I have a OEM dot view case as well that I broke trying to stretch it. This cover isn't quite as thick/sturdy but other than that I can barely tell a difference between the two. It mentions on the eBay item that it's "Dot View Flip Leather Case" though none of it seems leather to me. I did pull on it a bit to get it to fit on my glass screen protector and it sits almost flush. Better than the OEM case.
Click to expand...
Click to collapse
What size screen protector do you have? A .3mm?

DevenStonow said:
What size screen protector do you have? A .3mm?
Click to expand...
Click to collapse
Yep. This one, http://www.aliexpress.com/snapshot/6100440084.html . Did save me last weekend though. I have a decent chip on the bottom right edge of it. I don't remember dropping my phone but I was at a party and far from sober.

henderjr said:
Yeah it works well. Not as snappy closing and folds over easier than the OEM which I like. I wish they made one that didn't automatically close though. I was hopping the "leather" feature would be the folding side and it would lay open if I wanted it to. OH well. It folds more flat than the original at least.
I have my old one. Basically the cover tore off the back when trying to stretch it to fit over my glass screen protector. I then glued it into a cheap case I got off Amazon and it fit decent but wasn't perfect and the view through the case just seemed off. Here's a couple pictures of my MacGyver'd case.
Click to expand...
Click to collapse
That's exactly what my idea was. I wanted to find a way to incorporate the cover into my current case which provides much more coverage than the Dot View does.

Might have to try this out
I like my pure-gear case, but I've always been intrigued by the dot view...

Never buy the knockoff, the quality sucks. You get what you pay.

i got this:
http://www.ebay.com/itm/ULTRA-THIN-...Cell_Phone_PDA_Cases&var=&hash=item27e7b67cf4

revolve82 said:
After reviewing several different version of Dot View Case Clone, I ordered mine at Amazon for $10 here http://amzn.to/1uCKago
This one stated that it is using the same material as the HTC version else some other version uses leather front cover with cut out holes which I'm worried that swiping on it wont be as smooth.
Anyone had the leather front cover version? They have some nice colors especially the gold color for my gold M8.
Click to expand...
Click to collapse
Received mine today, I didn't own the OEM version so am unable to compare but this version seems just fine and works exactly like the original version.

I bought one from miniseller in ebay. I got it today only they sent me a case that isn't a dot view and it is for the m7
Sent from my HTC One_M8 using XDA Premium HD app

I got one for about $15 off eBay.. It has htc logos on it but almost certainly is a knock off. Sad part is that it doesn't close all the way with my tempered glass screen protector so it's kind of a waste of money. I've seen some posts that say it will close better after about a week but I tend to doubt it.
Quality seems fine and about the same as the authentic ones.

scott500 said:
I got one for about $15 off eBay.. It has htc logos on it but almost certainly is a knock off. Sad part is that it doesn't close all the way with my tempered glass screen protector so it's kind of a waste of money. I've seen some posts that say it will close better after about a week but I tend to doubt it.
Quality seems fine and about the same as the authentic ones.
Click to expand...
Click to collapse
I got a knockoff from ebay as well. Though it doesn't say htc anywhere on it. IMO it's way better than the OEM one. The hinge allows the cover to lay flatter when opened than the OEM one I have and it does work fine with my .33mm glass screen protector. It did seem to break in as at first it would lay almost flat but not quite. Now it lays flat. No complaints!

henderjr said:
I got a knockoff from ebay as well. Though it doesn't say htc anywhere on it. IMO it's way better than the OEM one. The hinge allows the cover to lay flatter when opened than the OEM one I have and it does work fine with my .33mm glass screen protector. It did seem to break in as at first it would lay almost flat but not quite. Now it lays flat. No complaints!
Click to expand...
Click to collapse
Thanks... I'll put it back on for a few days and see if it improves. I have a iloome glass protector on. Fingers crossed

I bought this one from amazon:
http://www.amazon.com/gp/product/B00LXYN6ZI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It definitely isn't as nice a quality as the OEM Dot View but it does fold flatter against the back. It seems to function perfectly but does not lay perfectly flat as I have a .33 tempered glass screen protector. I'm actually think about hitting it wit a heat gun to help it out a little bit.
I would never have bought the OEM case at the price they were charging for it, but this knock off was certainly worth the $9.94 I spent on it.

I have the same case as poster above me it was surprising better than the knockoff I bought in the U.S which the inside start to peel, didn't have htc logo on it and was more money.
Sent from my HTC One_M8 using Tapatalk

I paid $12.99 on eBay for a knock off case. I paid the extra 3 bucks because it had the HTC logo on front and on the back. So far it's fine.
Someone just posted a disturbing issue with the dot view case magnet leaving an 'imprint' on the screen. It's in the accessories section.
Should we start worrying about this from our dot view cases?
Sent from my HTC One_M8 using Tapatalk

Matt screen protector and a good case - India

Anyone in India found a good screen protector and case ?
Would prefer something from flipkart as i am ordering the phone from there.
Thanks !

tharmor said:
Anyone in India found a good screen protector and case ?
Would prefer something from flipkart as i am ordering the phone from there.
Thanks !
Click to expand...
Click to collapse
About the Matt screen guard, I am not sure. but I got one myself from gadgetshieldz.. Used only the screen protector as of now! Pretty good i must say! Except for the fact, I didnt apply the skin pretty well! That apart, rest assured, its a good product!:good:

tharmor said:
Anyone in India found a good screen protector and case ?
Would prefer something from flipkart as i am ordering the phone from there.
Thanks !
Click to expand...
Click to collapse
I'd ordered the Phone on the launch day, hence I got the Original Motorola Flip Cover with 50% discount (i.e. 850/-)
I must say, quality of the cover is excellent.
The back is matte finished with a very premium look, it also protects the camera lens nicely by adding a little bump to it.
The case has magnets into it and it snaps to the phone nicely.
Ohh....the flip cover also wakes the device automatically when opened and also locks the device when closed.
If you can also get it for 850, I'm sure you won't regret buying it.
About the matte scratchguard, I actually bought one from eBay but haven't used it because the cut outs looks a little off...
Hope it helps other buyers....
Btw, if someone finds a perfect fit scratch guard, please share the link etc here...

whatever7276 said:
I'd ordered the Phone on the launch day, hence I got the Original Motorola Flip Cover with 50% discount (i.e. 850/-)
I must say, quality of the cover is excellent.
The back is matte finished with a very premium look, it also protects the camera lens nicely by adding a little bump to it.
The case has magnets into it and it snaps to the phone nicely.
Ohh....the flip cover also wakes the device automatically when opened and also locks the device when closed.
If you can also get it for 850, I'm sure you won't regret buying it.
About the matte scratchguard, I actually bought one from eBay but haven't used it because the cut outs looks a little off...
Hope it helps other buyers....
Btw, if someone finds a perfect fit scratch guard, please share the link etc here...
Click to expand...
Click to collapse
I dont like the flip cover as it makes the phone very bulky ! Thanks for the inputs though.

tharmor said:
I dont like the flip cover as it makes the phone very bulky ! Thanks for the inputs though.
Click to expand...
Click to collapse
Same here
That's why I am waiting for a good amzer case

jirstany said:
About the Matt screen guard, I am not sure. but I got one myself from gadgetshieldz.. Used only the screen protector as of now! Pretty good i must say! Except for the fact, I didnt apply the skin pretty well! That apart, rest assured, its a good product!:good:
Click to expand...
Click to collapse
From where did you orderd gadgetsheildz ?

VanshKhanna said:
From where did you orderd gadgetsheildz ?
Click to expand...
Click to collapse
@VanshKhanna: I ordered on their website itself! They arent yet available with the retail vendors yet. I picked the complete protection for 499! There's some discount going on in gadgetshieldz.in. Check them out.
PS: Its not Matt finish!

Does any of you know of any Moto G(2014) case which allows closing and opening cover over the ports because my last phone gathered a lot of lint inside the charging and headphone ports?

VanshKhanna said:
From where did you orderd gadgetsheildz ?
Click to expand...
Click to collapse
From thier website..
http://www.gadgetshieldz.in/:)

I bought this case from amazon - http://www.amazon.in/Heartly-Spider...F8&qid=1417076843&sr=8-1&keywords=moto+g+kick
Although it is bulky but the black part can be de-attached if you want a less bulky look. It will also protect Moto G's fragile display (prone to damages even with minor falls) from damage to a great extent. I bought the white colored case and it looks great. Many of my friends liked the case's unique look (even I took off the black layer).
About the screen protector, I bought a total care screen protector from a local shop for 150/-
It's great and I use the 'total care' screen protectors on almost all my devices. I can say that the quality is great.
If you decide to buy gadgetshieldz, use promocode 'adw20' for discount.
EDIT - http://forum.xda-developers.com/mot...ugged-hard-tpu-pc-cover-stand-holder-t2909670
This guy bought the same case as me. Check out the pictures.

Any suggestions for the screen guard guys?
And ofc some good suggestions for case wont hurt either Would prefer non flip cases..
Surprisingly, no grip shells for the 2nd Gen Moto G :|

spacescreamer said:
Any suggestions for the screen guard guys?
And ofc some good suggestions for case wont hurt either Would prefer non flip cases..
Surprisingly, no grip shells for the 2nd Gen Moto G :|
Click to expand...
Click to collapse
@spacescreamer, You could check out Nillkin 9H Tempered Glass Screen Protection. I am using it.

observingi said:
Nillkin 9H Tempered Glass Screen Protection
Click to expand...
Click to collapse
Thanks mate.. that one is already on my radar
Noticed it a few days back and everybody been raving about it.
Any other suggestion for reg screen guards? Non tempered glass screen protectors ie..

spacescreamer said:
Thanks mate.. that one is already on my radar
Noticed it a few days back and everybody been raving about it.
Any other suggestion for reg screen guards? Non tempered glass screen protectors ie..
Click to expand...
Click to collapse
I was using a Matte screen guard before changing to Nillkin, The matte one definitely reduced a lot of glare but also hampered the brightness and crispiness.
Nillkin looks like stock glass screen with additional protection.

observingi said:
The matte one definitely reduced a lot of glare but also hampered the brightness and crispiness. Nillkin looks like stock glass screen with additional protection.
Click to expand...
Click to collapse
Those are good relevant points.. thanks mate
I have ordered from myscreenguard.com, will try them for few days and then will go with Nillkin stuff.
As for the case, i have ordered Cruzerlite Bugdroid. Wanted the Tudia TPU case, but that wasnt available unfortunately.
Hoping for the grip shells to be released by lazy Moto people soon.