[Q] samsung captivate cwm stuck - Captivate Q&A, Help & Troubleshooting

hi gay's
i need your help i have samsung captivate sgh-i897 thae was run on 4.0.2 android
i try to update it via cwm with zip file
and that don't work i try to update cwm to corn kernal and corn kernal stuck say "systeam crop "
so i try to download speed mod kernal and try to update to cm 11 and many other rom
and it don't instal and my device not work know any one can help me

Might need to revert to stock rom, then re-root, etc.
Learn about Odin. Do a little searching and reading on the forum. There's a lot of information available on these phones.

Related

Galaxy S wont boot

Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch

[Q] Major issues with the i9000 right now. Please Help.

Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Well I just tested the SD card in another phone and it works fine. So it's definitely the software/rom I'm using now I think.
Is there anything I can do to make this work. Maybe like a completely stock 2.2.1, that is guaranteed to work haha? I just need this card to be read. Because even when I plug the phone and run Kies, Kies doesn't recognize the version of the firmware. And If I try to use superoneclick root, it also doesn't recognize the version of the firmware.
So right now I'm using 2.2.1 XWJSD, which stock rom should I install with odin or Heimdall to make this work?
Thanks a lot again.
Head over to this thread and download JVZ (Gingerbread 2.3.6), flash with Odin with re-partition checked, then head over to Chainfire's thread for CF-Root kernel for JVZ and flash that through Odin as well.
Forget about Kies since you'll no longer be using that to update firmware and whatnot.
CF-Root will come with CWM installed, so after you get that done, download MIUI and flash through CWM
Thanks a lot will try it out.
This CF-Root right? CF-Root-XX_OXA_JVZ-v4.3-CWM3RFS.zip
Unfortunately the phone is stuck in a bootloop now after installing 2.3.6 JVZ.
Did you make sure re-partition is checked? If it still bootloops after re-partition then try JVT or some other stock ROM and see if that boots up before applying the CF-Root kernel
Yeah I made sure re-partition is checked, and I installed it with the 512 pit file, unless I shouldn't be using the .pit?
your gona have to reflash the rom or install arom thats already rooted you could try darky 10.2 re or check out puggerduk on tube
Root Galaxy S i9000 and install a custom rom
Hey guys refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1451345
He's having the same issue, so just help us out there Thanks alot!
eclipse245 said:
Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Click to expand...
Click to collapse
MIUI is running based on Android 2.3, I found the Android forum that helps me well enough to do my first flashing and rooting. Here is what you need to try to do:
1. Flash your i9000 with XXJVU 2.3.6 ( Value Pack ):
http://www.theandroidsoul.com/xxjvu/
2. Root your I9000 with CF-Root-XX OXA JVU 2.3.6-v4.3-CWM3RFS:
http://www.theandroidsoul.com/root-xxjvu-firmware/
Do everything on the post and you can install MIUI ROM from recovery straight away after that.
Hope this helps. If it does, please consider press 'THANKS' button

[Q] Bootlooping Problem in Galaxy S I9000

Hi,
I have a problem when trying to flash my galaxy s and install ICS Dark night v5.5.
When I try updating the kernel using ODIN, my phone gets into bootloop.
It is a froyo installed phone. Also, I am unable to get recovery mode. It enters download mode though.
Can anyone help me out in this??? I am very new to this stuff... I am a beginner...
Held up in this for a couple of weeks.....
Thanks,
Sridhar
If you can boot into download mode, use ODIN to flash a stable rom, then get CWM and your back to where you were, hold off the nightly builds or post in the Cyanogenmod official thread or forums.
Thanks a lot... That did work.. But now i have got Mobile network not available error after flashing.....
Probably best to mention which version of software you are using and the source...
Best option is to flash stock gingerbread version via Odin.
www . theandroidsoul . com / xxjvu /
sorry can't put correct address in yet dont have enough thanks...
it would be better to update to any stable stock rom, go to sammobile.com...
i suggest you update to the latest firmware or ics stock rom for i9000 via odin then root that firmware you have chosen(CF-ROOT) and then update the custom rom darknight v5.5 via cwm...
I think you need gingerbread bootloaders for ics.. You were on Froyo, so it won't work.. You'll need to install a stock gingerbread rom with the pit file and repartition.. After that you can try an ics rom..
I found this thread. After attempting to get CM9 onto my S it wouldn't boot so I used odin to install a stock from from sammobile but now the phone just boot loops.
Could someone please help me.
More info:
After the odin flash - I get a screen like the recovery menu saying things such as "E:Format_volume:rfs format failed on /dev/block/stl10" and things of a similar nature - will have to see what the others say.
Any ideas?
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Thank you. Will try that tonight
Sent from my GT-I9000 using XDA
vanisleryan said:
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
Thank you sooooo much that worked an absolute treat.
Sent from my GT-I9000 using XDA

[Q] i9000 tried to flash CM9...kinda fsck'ed

[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin
Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.
Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]
Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9

[Q] [i9000] [SOLVED] Upgrade to CM7.2.0

Here is my question: I have a SGS i9000 with froyo 2.2 stock and cf-root, by flashing cf-root i gained obviously root but also the recovery 2e that should be without signature verification. Now if i want to install CM7.2 can i just install it via recovery 2e by renaming it update.zip? or i will brick the phone? On Cm official wiki page about installing they say you need to have gingerbread installed but i'm on mac and i can't flash a gb rom because heimdall is not detecting the file, i also tried with a linux partition on my mac but it did not worked. to get root i used first z4root and then mobile odin to flash cf root with recovery 2e.
thanks in advance to who will help me!
PS: I also have a I9001(see signature) but the phone for wich i'm asking is a i9000!
dagothe9 said:
but i'm on mac and i can't flash a gb rom because heimdall is not detecting the file,
Click to expand...
Click to collapse
download KIES for Mac from My Android collections link below, and upgrade your phone to Gingerbread 2.3.6 (KIES will do it automatically) than root it with a semaphore kernel to get CWM, before going on to ICS and than to JB...should be done in this manner , do not jump from GB to JB ( you will have less problems)
xsenman said:
download KIES for Mac from My Android collections link below, and upgrade your phone to Gingerbread 2.3.6 (KIES will do it automatically) than root it with a semaphore kernel to get CWM, before going on to ICS and than to JB...should be done in this manner , do not jump from GB to JB ( you will have less problems)
Click to expand...
Click to collapse
ok i will try it, but kies from samsung site is not working at all. and moreover i have this problem, i just want to go from froyo to CyanogenMod 7.2 (android 2.3.6 GB). without any intention to go to ICS or JB. Second thing, if i manage to update from kies then heimdall is going to recognise it? Because if not i can't flash semaphore. Last thing i should uroot the device to update from kies right?
Many thanks for your help!
new information: I have installed your version of kies, and it finally recognise the phone, but it say that the device do not support update via kies, what can i do? thanks
Second edit: i researched and now i know the problem is that i cf-rooted my phone. so how could i revert? to cf-root i have used mobile odin after gained SU with z4root. i would had avoided to flash that if i had know that today kies were to recognise my phone! please help me lso if it was a noob mistake.
dagothe9 said:
new information: I have installed your version of kies, and it finally recognise the phone, but it say that the device do not support update via kies, what can i do? thanks
Click to expand...
Click to collapse
Ok, since you have installed KIES and working , heimdall should also be working, IF not you can download a latest heimdall mac version, from earlier link to update to ginger bread 2.3.6, before CM..also backup efs. contacts, images etc first, IF you have CWM, you can even do a nandroid backup, before any upgrade .
Always best to do progressive upgrade as it will not complicate the upgrade by jumping from froyo to CM ( which is a custom ROM) . Best to READ the developers Flashing guidelines before upgrade too.
Flashing the gingerbread ROM will automatically remove your earlier CF root, just download your original Firmware for your region from http://forum.xda-developers.com/showthread.php?t=1102881 , than use a semaphore Kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 this will give you root plus CWM for you to upgrade to CM 7.2
Do not jump, as you need Gingerbread bootloaders for upgrade to CM
Solved!
xsenman said:
Ok, since you have installed KIES and working , heimdall should also be working, IF not you can download a latest heimdall mac version, from earlier link to update to ginger bread 2.3.6, before CM..also backup efs. contacts, images etc first, IF you have CWM, you can even do a nandroid backup, before any upgrade .
Always best to do progressive upgrade as it will not complicate the upgrade by jumping from froyo to CM ( which is a custom ROM) . Best to READ the developers Flashing guidelines before upgrade too.
Flashing the gingerbread ROM will automatically remove your earlier CF root, just download your original Firmware for your region from http://forum.xda-developers.com/showthread.php?t=1102881 , than use a semaphore Kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 this will give you root plus CWM for you to upgrade to CM 7.2
Do not jump, as you need Gingerbread bootloaders for upgrade to CM
Click to expand...
Click to collapse
Ok the problem was with froyo secondary bootloader, that is not recognised by heimdall if connected to a mac, nor to a VM Linux on the same mac. so i had borrowed my neighbour's netbook with windows 7. installed heimdall there and everything went smoothly. Firstly i have flashed a new GB rom, 2.3.6, the newer eropean one, then flashed CF-root for that rom with integrated CWM 3.x.x.x. The only problem was that when i flashed from cwm CM7.2.0 i hade a boot loop, so i had to swith off the fone by long pressing the power botton, then i booted in recovery, now the recovery was cwm 5.x.x.x so i wiped data/factpry reset and wiped cache, from the new cwm 5.x.x.x reinstalled CM7.2.0's zip and the latest gapps, booted again and everything went smooth from there.
Thanks for your help!

Categories

Resources