*** I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE OR LOSE ANY DATA!! BACK IT UP BEFORE HAND!! ***
LiquidSmooth KitKat for Droid X
Important Notes:
I have not tested Phone/Data functionality, as I no longer have service. So I have no idea if it works.
This is a work in progress. I don't have much time to work on this ROM, so please be patient between builds.
This is based off of LiquidSmooth's source, mixed with Quarx's and m.ksy/Aaahh's source.
Instructions for INITIAL INSTALL of LS KK on Droid X:
Download latest ROM and gapps.
If you're on a custom ROM already (CM, MIUI, LiquidICS) goto STEP 6. Otherwise, download Droid2RecoveryBootstrap_CWM5.0.2.0.apk, Framaroot.apk, and twrp_2.8_kitkat_dx.zip to your DX.
On phone: Settings->Applications(Enable Unknown sources)->Development->Enable USB Debugging.
Install Framaroot.apk, launch it and select "Gimli", reboot you're phone.
Install Droid2RecoveryBootstrap_CWM5.0.2.0.apk, launch it, select "Bootstrap Recovery", grant Superuser access and reboot phone.
Reboot phone into CWM Recovery or if you on stock firmware launch Droid X Bootstrapper and press "Reboot Recovery".
In CWM choose wipe data/factory reset (this will completely delete all your data on phone except sdcard), then install zip from sdcard and select twrp_cm11_dx.zip.
Reboot system.
(It's touch) Recovery -> Team Win Recovery.
In TWRP choose Install and select ROM, then swipe.
Once installed, click Reboot System and let it fully boot up.
Reboot into Recovery again.
In TWRP choose Install and select gapps, then swipe.
Once installed, click Reboot System.
Instructions for UPGRADING LS KK for Droid X:
Reboot into Recovery.
Select "Backup".
Check all boxes that apply, then swipe.
Once finished, go back to the main menu.
Select "Wipe" -> "Advanced Wipe".
Check all boxes that apply EXCEPT "sdcard", then swipe.
Return to main menu again.
Select "Install", then select the latest version of the ROM on your sdcard, then swipe.
Once installed, click Reboot System and let it fully boot up.
Reboot into Recovery again.
Select "Install", then select the latest version of the gapps on your sdcard, then swipe.
Select "Reboot System". Enjoy!
Bugs:
Liquid's Kernel Tweaker does not work. Use Aero Kernel Control.
You tell me...
DOWNLOADS
ROM: LS-KK-v3.2-2015-01-28-shadow.zip
MD5: 10c02b31508e9857c70e881db3e93509
GAPPS: 8-7_GApps_Minimal_4.4.4_DX.zip
MD5: 74a22b22496c88d371b5890adbe0b036
Extras:
Droid2RecoveryBootstrap_CWM5.0.2.0.apkFramaroot.apktwrp_2.8_kitkat_dx.zip
XDA:DevDB Information
LiquidSmooth KitKat, ROM for the Motorola Droid X
Contributors
roeblatt3, m.ksy, Aaahh, Quarx, CyanogenMod Team, LiquidSmooth Team
HUGE Thanks to Quarx, m.ksy, and Aaahh for their brilliant work to keep these Droids kicking!!
This wouldn't have been possible without them!
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: TWRP 2.8.0.0
Based On: LiquidSmooth, CyanogenMod
Version Information
Status: Beta
Current Beta Version: 3.2-2015-01-28
Beta Release Date: 2015-01-28
Created 2015-01-28
Last Updated 2015-01-28
Reserved...
Excellent, a multi ROM safestrap sure would be nice now
Sent from my DROIDX using Tapatalk
Couple of things i noticed.
If coming from Cm11, Wipe everything except SD card (System, Data, Android Secure and Caches...) It keeped trying to call verizon to activate otherwise.
Just Install Rom, boot rom, then Reboot recovery and install GApps, I could not get past language selection if I installed GApps at same time.
see Attached
Damn... I'm kicking my self now for not taking the old x with me tonight
sd_shadow said:
Couple of things i noticed.
If coming from Cm11, Wipe everything except SD card (System, Data, Android Secure and Caches...) It keeped trying to call verizon to activate otherwise.
Just Install Rom, boot rom, then Reboot recovery and install GApps, I could not get past language selection if I installed GApps at same time.
Click to expand...
Click to collapse
Thanks. Instructions updated.
I can't believe that I didn't see this. I'll flash tomorrow sometime!
---------- Post added at 06:06 PM ---------- Previous post was at 05:20 PM ----------
Bobcus Leper said:
I can't believe that I didn't see this. I'll flash tomorrow sometime!
Click to expand...
Click to collapse
Forget that! I have already flashed and the responsiveness is incredible!
Bobcus Leper said:
I can't believe that I didn't see this. I'll flash tomorrow sometime!
---------- Post added at 06:06 PM ---------- Previous post was at 05:20 PM ----------
Forget that! I have already flashed and the responsiveness is incredible!
Click to expand...
Click to collapse
Yeah this rom is damn sweet. I've been having problems with many random lockups and reboots though. But I am keeping this on the x. I am not really a fan of cm11... only cause it doesnt have the level of customization that roms like liquidsmooth have
This ROM is great, very smooth and decent battery life.
Sent from my DROIDX using Tapatalk
What kernels are supported?
kingtiger01 said:
What kernels are supported?
Click to expand...
Click to collapse
Only the one included with the rom
Very nice work @roeblatt. Thank you.
Sent from my HTC One_M8 using Tapatalk
sd_shadow said:
Only the one included with the rom
Click to expand...
Click to collapse
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
--------------
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
kingtiger01 said:
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
--------------
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
Click to expand...
Click to collapse
This is the only kernel available at the moment until the 3.0 kernel is ported from Quarx's LP build
Sent from my ATRIX HD using XDA Free mobile app
kingtiger01 said:
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
Click to expand...
Click to collapse
see https://github.com/MotoDX-CM11/android
and
local_manifest.xml.txt
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
Click to expand...
Click to collapse
have you tried otg with cm11?
---------- Post added at 08:22 AM ---------- Previous post was at 08:16 AM ----------
and mksy's build instructions
https://github.com/MotoDX-CM11/android/blob/cm-11.0/README.mkdn
@roeblatt3 Nice work!! just now noticed this! Perhaps I should try porting AOKP since I already have the source downloaded @Aaahh what's the progress on the true safe strap with multi-ROM support?
Oggie7797 said:
@roeblatt3 Nice work!! just now noticed this! Perhaps I should try porting AOKP since I already have the source downloaded @Aaahh what's the progress on the true safe strap with multi-ROM support?
Click to expand...
Click to collapse
I'm not even working on it... "
If i have time i will
its really just syncing multiboot and building it
you then take the ramdisk and move it to safestrap folder
Aaahh said:
I'm not even working on it... "
If i have time i will
its really just syncing multiboot and building it
you then take the ramdisk and move it to safestrap folder
Click to expand...
Click to collapse
How about the ramdisk-recovery that you had me and @Bobcus Leper test awhile back?? We had it to where we could setup another ROM slots but only for other cm11's (including liquid now) personally I like safe strap and ROM slots more so than multiboot..but hey, I'll take what I can get xD
Tap'd from my Unicorn covered Bionic
You need a better naming process @Aaahh
Tap'd from my Unicorn covered Bionic
Related
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen
Earlier, I have been compiling several ROMs for the galaxy tab (P7510/p4wifi) based on KitKat 4.4. I now decided to move over to OMNI ROM as base: http://omnirom.org/
The nice thing of OMNI in my personal opinion is smoothness: it is relatively low in features, but at the same time it is not that resource hungry as some other ROMs. The end result is a smooth ROM.
Changelog of 15-Feb-2014
-Omni codebase of 14-Jan
Several small fixes, nothing spectecular
It features the Infamous kernel (same kernel as for JB4.3, without SELinux). The zram code has been optimized (based on google advice for low-RAM devices) and is enabled by default.
To see the additions on top of Omni, check github (additional patches are always shown on top):
Frameworks
Settings
OmniGears
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Boot tablet (there sometimes are bootloops if gapps is flashed directly on top of the ROM without first booting the ROM)
-Reboot recovery
-Install SuperSU: http://download.chainfire.eu/371/SuperSU/UPDATE-SuperSU-v1.85.zip
-Install gapps (you should use a package specifically for KK4.4 and with the old-fashioned updater-script! - don't worry if you install an outdated gapps packages with the correct updater-script, as long as it is for KK4.4 the apps in the gapps package will be automatically updated -> only small gapps packages fit, e.g. banks core of pa 0-day gapps mini)
-Boot it up
-> some people report issues (e.g. bootloop or crashing gapps) if they flash ROM, gapps & supersu in a row after fully wiping the tablet. In that case, wipe again, flash ROM, boot the tab, reboot to recovery, and then flash the rest.
-> if coming from stock ROM, a factory reset may wipe you entire /data partition, so you loose you sdcard contents as well (I think this only happens with CWM, but I'm not sure)
-> in CWM "wipe system partition" can be found under mounts, and is called "format /system"
->If you get the message 'This package is for "p4" devices this is a "GT-P7500"' (or something likewise) update to a recent CWM or TWRP
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install SuperSU (in the SuperUser app you can create a script that will automatically backup/restore SuperSU on ROM updates so you don't have to reflash SuperSU).
-Boot it up
You can download any gapps packages for kitkat that you like, but one that many have used successfullyis PA 0 day gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/omni44/
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/omni44/
Credits:
OMNI team for the code
AAccount for his help along the way to get KK4.4 to compile for our aging device!
pershoot for the basis for the device trees & kernel base
Code:
Basis of OMNI code: https://github.com/omnirom/
Common p4 device tree: https://github.com/kasperhettinga/android_device_samsung_p4-common
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4wifi
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4wifi
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4
What does NOT work?
-There are graphical glitches. Although they mainly have been solved there seem to be some remaining issues with hwcomposer that may crash the tab.
-Bluetooth audio does not work (other Bluetooth functions do work).
-HDMI output (may be fixed according to some posts, didn't test myself yet)
-HD movies (in e.g. youtube) may stutter
Smoothness advice:
Go to performance settings:
-Overclock CPU to 1400MHz (Do this at your own risk!)
-Set IO scheduler to CFQ
-Keep governor on Interactive
Go to developer settings:
-Set the three animation scale options to 0.5x
-Activate "Force GPU rendering"
-Active "Disble HW-overlays"
-Set background process limit to 4 processes
(if performance/developer options are not yet shown, go to settings>about and press build number 7 times)
-> Thanks to all forum members contributing to this list
-> Do it at your own risk!
-> Don't complain about limited battery life (ROW+interactive+1000MHz leads to better battery life for sure)
Some other tips:
-For improvement of sound quality, you can use Viper4Android
-For more volume only, SpeakerBoost is earier to use
-For netflix, head over here: http://forum.xda-developers.com/showpost.php?p=49208063&postcount=445
-To be able to use Flash player, use a browser that doesn't use the kitkat browser engine (e.g. firefox can be used). Download flash player from adobe website (thanks to AAccount for finding out!).
- If you can't see your internal SD on PC: Go to Settings -> Storage -> 3 dot menu -> tick MTP.
-To use the multi-window feature, go to the recent apps screen, press&hold an app, and select put aside.
Great......downloading now
Sent from my GT-N7000 using Tapatalk
p4
is there any p4 version in progress br zezam?
Nice work :good:
you will get version and for the P7500 ?
kasper_h said:
Reserved
Click to expand...
Click to collapse
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
zezam67 said:
is there any p4 version in progress br zezam?
Click to expand...
Click to collapse
paiktaras said:
Nice work :good:
you will get version and for the P7500 ?
Click to expand...
Click to collapse
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Xenodrome_ said:
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
Click to expand...
Click to collapse
Just wipe everything and flash the ROM.
eushaun99 said:
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
You need to separately flash SuperSU. SuperSU can create a script for backing it up, so that on future ROM flashes you don't have to repeat this.
oooppppsss the ROM can not be installed in a P4
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Doh, its a p4wifi ROM. If you don't use 3g, flash a p4wofi recovery first, reboot, and flash again.
Sent from my GT-P7500 using Tapatalk HD
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Traace said:
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Click to expand...
Click to collapse
The problem is that in 4.4 the radio stuff has been redone. I also had problem with another device I develop for (SGS) to get the radio to work. And to develop a ROM for a device I don't own make it even more complicated. In the past weeks I sometimes flashed 10-15 testbuilds on a single day to try and fix something simple (like USB OTG). If someone else would test something for me, the progress would be way too slow.
But all my code is open source: someone with a p7500 can just grab all the code, adapt it to p7500 and compile it. And start the whole process of fixing bugs
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
kasper_h said:
First installation:
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
Click to expand...
Click to collapse
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Chris4809 said:
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
rogconnect said:
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Chris4809 said:
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
jaibar said:
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Click to expand...
Click to collapse
Yes, you should only use kitkat (4.4) gapps!
kasper_h said:
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Yes, you should only use kitkat (4.4) gapps!
Click to expand...
Click to collapse
If it is 4.4 gapps you might want update the OP.. It is telling us that we should use 3.4
Sent from my SPH-L720 using xda app-developers app
After enabled ART on first boot then rebooted. And then rebooted to recovery to install Banks 12-14_GApps_Core_4.4.2_signed.zip.. then I can signed in Google...so far no FC on Google apps.
Sent from my GT-P7510 using Tapatalk
I'm getting the "setup wizard has stopped" error also.
Coming from pac_P4wifi_4.3-Infamous_20131114
Followed install instructions.
Used gapps-jb-20130813-signed
Cannot find gapps for 4.4. The 20130813 (4.3) package seems to be the most current.
CyanogenMod 11.o M12 for Samsung Galaxy Mini 2 (standard versio and no_internal version)
Notice:
Because the ROM is only tested on GT-S6500D, only this variant of Mini 2 is supported by me (since I only have this variant of Mini 2).
Functionality can be broken on other variants.
The ROM theoretically can be installed on:
GT-S6500
GT-S6500D
GT-S6500L
Disclaimer:
If you have decided to install this ROM on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences.
By installing this ROM, you accept this rule.
Click to expand...
Click to collapse
Changelog is in #2 post
What's not working:
Camcorder
Native screen recording
Internal memory can't be mounted - FIX: Use no_internal version
Download:
Normal mount of memories
https://www.androidfilehost.com/?fid=95855108297851274
no_internal version - try if you can't mount internal memory with normal mount version
https://www.androidfilehost.com/?fid=95857557620392723
How to install:
1) ClockWorkMod 6.0.4.5 (or higher) is required to install this ROM! http://forum.xda-developers.com/showthread.php?t=2156194
NOTE: I personally reccomend Philz Touch Recovery to install this ROM, so to be clear that there is no Status 7 errors use it (Credits for building Philz CWM go to @erikcas )
https://www.androidfilehost.com/?fid=95857557620391944
2) Download ROM .zip
3) Download Google apps (optional)
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset (not needed if installing above previous cm11 build)
8) Format /system (only if the previous ROM is not the same CM version)
9) Install the ROM .zip file
10) Mount /system, install Google apps
11) Done.
Click to expand...
Click to collapse
Kernel sources: https://github.com/TheWhisp/android_kernel_samsung_msm7x27a
Device tree: https://github.com/midzan21/android_device_samsung_s6500d
Device tree specific for msm7x27a chipset: https://github.com/midzan21/android_device_samsung_msm7x27a-common
Local manifest: https://github.com/midzan21/local_manifest-s6500d
Credits: @TheWhisp for all sources which i reuploaded because of stupid errors on syncing, CyanogenMod team for CyanogenMod ROM, legaCyMod for some things for building libs, @bleached for no_internal kernel and midzan21 (aka myself) for rebuilding ROM
XDA:DevDB Information
CyanogenMod 11, ROM for the Samsung Galaxy Mini
Contributors
midzan21, TheWhisp, erikcas, bleached, legaCyMod, Dazzozo and everyone else that is working on CM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2014-12-12
Created 2014-12-13
Last Updated 2014-12-16
Changelog
12.12.2014
* updated @TheWhisp CM11 M8 to M12
* for our phone: mostly bugfixes at CM base
* read CM blog for all updates from M9 up to M12
* all apk's and frameworks are updated
* libs are same just like kernel from 03.08.2014 build so this is why in About phone it writes TheWhisps kernel build date (I had some issues with that so I replaced my built kernel with TheWhisps)
* audio should work without editing build.prop (already edited file to make it working)
13.12.2014
*DevDB started (so it should be cleaner than original thread where is posted)
*Found problem with missing FM Radio apk (FIXED, UPLOADED WORKING VERSION)
16.12.2014
*Created no_internal version of ROM and uploaded to AFH
*Updated thread name
Is it normal that the changelog lists only changes till M11?
Nour Sherif said:
Is it normal that the changelog lists only changes till M11?
Click to expand...
Click to collapse
Yes it is normal. Cyanogen team forget to add M12 in changelog and for M12 they fixed POODLE issue (Google what is POODLE issue)
Sent from Mini 2 using TVZMod v1.1 via xda-developers free
great job man, tnx
screenshot ????
midzan21 said:
CyanogenMod 11.o M12 for Samsung Galaxy Mini 2
Changelog is in #2 post
What's not working:
Camcorder
Native screen recording
Download:
https://www.androidfilehost.com/?fid=95855108297851274
Kernel sources: https://github.com/TheWhisp/android_kernel_samsung_msm7x27a
Device tree: https://github.com/midzan21/android_device_samsung_s6500d
Device tree specific for msm7x27a chipset: https://github.com/midzan21/android_device_samsung_msm7x27a-common
Local manifest: https://github.com/midzan21/local_manifest-s6500d
Credits: @TheWhisp for all sources which i reuploaded because of stupid errors on syncing, CyanogenMod team for CyanogenMod ROM, legaCyMod for some things for building libs, midzan21 (aka myself) for rebuilding ROM
XDA:DevDB Information
CyanogenMod 11, ROM for the Samsung Galaxy Mini
Contributors
midzan21, TheWhisp, erikcas, legaCyMod, Dazzozo and everyone else that is working on CM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2014-12-12
Created 2014-12-13
Last Updated 2014-12-13
Click to expand...
Click to collapse
screenshot ????
//
TurkeyAndroidHacker said:
screenshot ????
Click to expand...
Click to collapse
We dont need screenshots... This is just an update to all frameworks and apps. Nothing that big of a change.
TurkeyAndroidHacker said:
screenshot ????
Click to expand...
Click to collapse
Lazarevic said:
Can touchwiz be installed on this ROM ?
Click to expand...
Click to collapse
meganukebmp said:
We dont need screenshots... This is just an update to all frameworks and apps. Nothing that big of a change.
Click to expand...
Click to collapse
@TurkeyAndroidHacker Never quoute OP, that is one rule of xda so please if have any other question ask
@Lazarevic yes you can install TouchWiz from my thread which you can find in signature
@meganukebmpyou got it right It is almost pure Android AOSP experience...
Lazarevic said:
Can touchwiz be installed on this ROM ?
Click to expand...
Click to collapse
Touchwiz can be installed by a zip that you could find here
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
So let me think @midzan21
This is that upgrade you've say into another thread? I will test it now
I was testing but CWM can't install "status 7 error"
Antox97 said:
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
[/COLOR]So let me think @midzan21
This is that upgrade you've say into another thread? I will test it now
Click to expand...
Click to collapse
Yes this is that upgrade. I created separate thread to be cleaner than in old thread
Also for status 7 error, try Philz Touch Recovery (contact me via PP for flashable zip) because I use that recovery for last few months and there works fine
Hm, now I've see that I have an old cwm, lol
---------- Post added at 09:58 PM ---------- Previous post was at 09:39 PM ----------
Camera doesn't work.
Antox97 said:
Hm, now I've see that I have an old cwm, lol
---------- Post added at 09:58 PM ---------- Previous post was at 09:39 PM ----------
Camera doesn't work.
Click to expand...
Click to collapse
Camera works on my phone because it is based on good old stable CM11. camcorder is only thing that doesn't work on our phone.
midzan21 said:
Camera works on my phone because it is based on good old stable CM11. camcorder is only thing that doesn't work on our phone.
Click to expand...
Click to collapse
I installed your rom from stock howerver the camera doesn't work, the camera app will crash when i try to open it. I've done all the wipes but the problem still persist.
EDIT: i tried miui camera and it seems to work however it asks to insert an SD card to save the photos when i've already inserted one. Do you know how can i solve this problem?
EDIT2: I pinpoited the root of the problem, every camera app i tried could initilise the camera sensor however it couldn't save the photo because it doesn't find the sd card. I mounted it from the memory setting and the problem still persis. I dunno how to solve this.
EDIT3: at the end it was the internal memory which is not mounted. Unfortunately i'll hv to look for another rom.
I think that on my phone camera doesn't work 'cause firmare. This ROM is for s6500d. I have once without "d". And also, the repo that @Arathon describes
Antox97 said:
I think that on my phone camera doesn't work 'cause firmare. This ROM is for s6500d. I have once without "d". And also, the repo that @Arathon describes
Click to expand...
Click to collapse
I have the model 6500 that is plagued with the internal memory issues, I resolved all the problems by installing the cm rom made by bleached.
Arathon said:
I have the model 6500 that is plagued with the internal memory issues, I resolved all the problems by installing the cm rom made by bleached.
Click to expand...
Click to collapse
Hm I remember, TheWhisp CM11 doesn't recognize storages. But I think that CM11 isn't totally stable
I am using this since it was released. Very good. I have some lag but I have switched to ART and I think this is the problem. The problem with storage could be fixed by installing pit file from ODIN. That is the way I fixed the issue. Can the developer tell if ART is working fine or Dalvik is fine.
@Arathon and @Antox97 I wroted on first post: this is made for S6500D and it isn't tested on S6500 (non D) version. Problems with memory can be fixed by using boot.img from bleached CM11 build and replacing it in my build. If I got some more spare time today I should make it (no_internal version) and upload it tommorow.
For @toncata - ART is sluggish and slow on devices like ours. ART is primarly made for Nexus 5 and newer devices which have enough internal memory and more RAM. I use Dalvik because of Xposed Framework ( for Instagram downloader and AppSettings modules), but I tested ART (needed because of development one application for college) and that is my personal opinion.
Also for all you, tomorrow I should update #1 post with Philz Touch CWM download link, so you can try it if CWM gives you Status 7 Error. No_internal version should be also in first post.
Samsung Galaxy Tab 2
AOSP - Project
This Rom is based on AOSP to give the user a pure AOSP feeling.
The builds only includes device specific changes to compile and get a booting AOSP!
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modifications, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Downloads:
ROM Downloads for all supported devices can be found here
(Those who have a repartitioned system partition use "not-block-based" builds! Other builds won't be flashable on those devices!)
[#DONATETOME]
FAQ
Q: Will there be any updates?
A: Yes, there will, but only if i can fix a bug or AOSP releases an Update - else there's no update needed.
Q: There's a nice feature in XXX-Rom and i like to have this included - ADD IT!
A: Sorry, i'lll keep this Rom Stock-AOSP as possible. Maybe XXX-Rom is a better choice for you, if you really need this feature.
Q: How to enable root?
A: This Rom doesn't have root included. Why? Because root isn't part of AOSP. You can find the way to SuperSU Thread from @Chainfire and download SuperSU as flashable-ZIP if you need root.
Q: Is it possible to overclock the kernel?
A: Yes and no. First of all you need root and a Kernel-App like KernelAdiutor. After that you can slight OC the CPU & GPU - this Rom includes latest SlimLP Kernel.
Q: I found a bug.
A: Nice finding my friend Please provide needed logs - ADB will be your best friend, if you are replying in a development thread
There's a lot of tutorials out on YouTube or XDA on how to setup and use ADB - it's really simple!
At least you should tell step by step how to reproduce the issue.
I started creating a gerneral FAQ on my github - it includes instructions how to flash a Rom, how to get proper logs, etc. etc. etc., you can find it here
Changelog
Code:
2015-11-08 It's stock AOSP as released by Google (Android 5.1.1 R29 LVY48I), only additions
- screenshot: quick delete action
- advanced reboot menu
- Launcher3 instead Launcher2
- BootMessage: Show each app name being optimized during boot
- Show application's package name in the "App info" screen.
- Open app when clicking on icon in App Info screen
(... forgot about the releases between ...)
2015-08-07 based on Android 5.1.1_r9
XDA:DevDB Information
[P31xx][5.1.1] Samsung Galaxy Tab 2 AOSP-Project, ROM for the Samsung Galaxy Tab 2
Contributors
Android-Andi
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-08-07
Last Updated 2017-04-30
Wow! Andi!
Nice to see that AOSP Lollipop came to us again! Great work dev, @Android-Andi ?
Sent from my GT-P3100 using Tapatalk
Amazing, pure LP AOSP for my tab 2.
I really appreciate it...
Is f2fs in Cache and Data supported in this ROM?
Sent from my GT-P3100 using Tapatalk
Bhaskara Rao said:
Is f2fs in Cache and Data supported in this ROM?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
No, sry. Think it needs quite more changes than i would like to add... But i will take a closer look next time
Wow, this is awesome. Now I need to see if I can port Layers on top. Thanks Andi!!!
Sent from my Nexus 6 using Tapatalk
Thank you, Andi for the latest AOSP. No issues on clean installation. ROM is fluid. YouTube is not working. Logs attached.
Bhaskara Rao said:
Thank you, Andi for the latest AOSP. No issues on clean installation. ROM is fluid. YouTube is not working. Logs attached.
Click to expand...
Click to collapse
Thanks buddy I'll look into it next week, have some more time then
Clean install of latest AOSP (aosp_p3110-20150807.zip) with Dhollmen 3.0.101 kernel.
Youtube is working, but 720P videos do not work.
ilyichspb said:
Clean install of latest AOSP (aosp_p3110-20150807.zip) with Dhollmen 3.0.101 kernel.
Youtube is working, but 720P videos do not work.
Click to expand...
Click to collapse
Hey bruh @ilyichspb i also want to flash my kernel
I have tried but i softbricked my tab.
So,it will be great if you tell me the steps to flash a kernel.:laugh:
Aosp is smooth and lagfree.great work Andi.:fingers-crossed::good:
AFAIK Dhollmen Kernel doesn't have a fix for emmc bug. Only Android-Andi's ROMs and Recoveries have it. Take an informed decision before flashing custom kernels.
Sent from my GT-P3100 using Tapatalk
[email protected] said:
So,it will be great if you tell me the steps to flash a kernel.:laugh:
Click to expand...
Click to collapse
full wipe
install (via CWM)
AOSP
kernel
gapps
reboot
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
Bhaskara Rao said:
AFAIK Dhollmen Kernel doesn't have a fix for emmc bug. Only Android-Andi's ROMs and Recoveries have it. Take an informed decision before flashing custom kernels.
Click to expand...
Click to collapse
Looks like you are right. I will keep an eye on that. So far everything is working fine.
Seems like google went to nightly builds, r12 source released
Thanks!, will try soon
What is the recommended recovery to install this rom. I'm still running old ketut's stock rom. Thanks
Android-Andi's latest TWRP.
https://www.androidfilehost.com/?w=files&flid=25704
Sent from my GT-P3100 using Tapatalk
Bhaskara Rao said:
Android-Andi's latest TWRP.
https://www.androidfilehost.com/?w=files&flid=25704
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Whenevr i go to recovery i.e,twrp wipe>advance wipe>change system partition
Twrp says invalid partition select
I have tried this in both android andi's twrp and official twrp
I'm on p3100.
What to do.need help:victory:
I want to flash a rom withf2fs support thats why
[email protected] said:
Whenevr i go to recovery i.e,twrp wipe>advance wipe>change system partition
Twrp says invalid partition select
I have tried this in both android andi's twrp and official twrp
I'm on p3100.
What to do.need help:victory:
I want to flash a rom withf2fs support thats why
Click to expand...
Click to collapse
AOSP doesn't support f2fs.
About f2fs: take my twrp with "f2fs" in it's name. If you have more question about recovery then use the recovery thread pls.
Android-Andi said:
AOSP doesn't support f2fs.
About f2fs: take my twrp with "f2fs" in it's name. If you have more question about recovery then use the recovery thread pls.
Click to expand...
Click to collapse
Sorry! I got the sol of my problem
i didnt select cache and data before tapping on change partition
One question
Does Your latest recovery i,e. 2.8.7.1 supports f2fs.
i want to post this in recovery thread but xda said that u have less than 10 posts
Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid
Reserved 1 (Screenshots)
Someone please share some screenshots!
FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.
yess i'v ben waiting for this rom to get MM
ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try
nice new rom for s3 thinks Dev
spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?
Are you maintaining this ROM now?
sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!
sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks
sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result