hi guys. i recently replaced my cracked screen and after that i noticed that the auto rotate function isn't working properly. some times it's ok but sometimes like when i go to camera, and when I come back to menu, the screen is Locked on landscape mode and the only think I can do is to lock the device and unlock it to make the screen portrait.and after that i cant change the screen orientation att all unless i restart the phone.
Mostly the screen has a light that only noticeable in the quite dark place when the auto screen light is on after turning off the screen.
i had some problems with ambient light sensor and proximity sensor as well.
i once wiped the data i was thinking maybe it's a software problem but nothing changed
is it really a hardware problem? is the board or any parts damaged during the replacement?!
Same problem Here
I have the same problem, but it is with ambient light sensor and the proximity switch, when i go to the service menu (*#*#7378423#*#*) the proximity switch does not show up, when i press ambient light sensor it says ¨This device does not support this function¨.
This phone i just bought it a few this ago, i tried reseting customization, wiping data, flash another rom, Root... everything and no answer.
If u wipe and flash and still have the problem it is possible you have a hardware problem. Check all of ur water damage indicators to see if they are red. Also you could tell us your model.
Related
My cousin is having troubles with his Xperia Z. Specifically the proximity sensor. It is always turned on, meaning each time he's on a call the screen turns black and never comes back.
First I tried getting into service menu, only to find the proximity test "ON" all the time. I think the light sensor and proximity sensor are the same, right? The light sensor shows a read when exposed to different light conditions.
Then I factory reset the phone. No luck.
Then I flashed with flashtool. No luck. Still the same.
It is on the latest firmware revision.
Fixed it. I applied pressure with my fingers on the top right corner and got it to work.
I applied pressure to my own device and now it detects the proximity from farther away.
Hi -
My screen was not getting on after making the call so I wanted to check the service menu. I typed *#*#7378423#*#* and accessed the calibration menu and selected Proximity sensor menu.
It showed Autoscreen Brightness On and Proximity Switch OFF. I switched Autoscreen Brightness off (other wise the calibrate option is grayed out) and tried to calibrate the proximity sensor. I got the error -99 and the message that it cannot be done.
1. How do I switch on the Proximity sensor on
2. Will the calibrate option work if the phone is factory reset (there is a message which says - Pls factory reset the phone before calibrating).
Thanks in advance.
I'm tired of this bug too, got first one replaced (yellow tint, black screen + backlight on, proximity sensor) but I still have this sensor bugged, I have to stop the "power button ends call" option because of that!
babylonbwoy said:
I'm tired of this bug too, got first one replaced (yellow tint, black screen + backlight on, proximity sensor) but I still have this sensor bugged, I have to stop the "power button ends call" option because of that!
Click to expand...
Click to collapse
I found that the switch gets turned on when I place my finger near the Proximity Sensor :silly:
But the screen still does not dim when answering the call nor does it come on again once the call is finished..
My proximity sensor is not working on any app.
But *#0*# shows the sensor value changing....
Help.?
What apps are you trying it with?
As far as I remember proximity sensor works only with phone calls, pretty much only when you talk and it can be set to off, so check your settings. I also would like to know what other apps work with the sensor?
The proximity sensor doesnt turn the phone screen off during calls.
I meant to say that those sensor testing apps on the playstore is Not showing responses with the prox sensor but *#0*# does.
I'm having the same problem... Phone does not turn display off when it's at my ear.
I had the same issue wit mu new T-mobile Note8 (pre-ordered from Samsung) I have sent it back
Mine gets stuck at 0cm. (As if the phone is at my ear) it causes the screen to be off whenever I'm in a call. I have to reboot the phone to correct the issue.
Try this app and check if it works?
Phone INFO ★Samsung★: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
(in the HARDWARE tab > Sensors)
It will change between 8cm and 0cm.
today when I woke up, I suddenly realized that " all of the sensors" dont work!
even I tried *#0*# none of the sensors values are changing. even sensorhub self test fails!
also IRIS scanner stopped working!
isnt it STRANGE?
all of them stopped working suddenly
I have a exynos 950F, and proximity sensor does work fine with third party apps, I use gravity screen, and macrodroid mostly to make the screen on/off in diverse situations macrodoid is very useful for automation many things
none of the sensors work on my Galaxy note 8
I have the same issue, none of the sensors work, i mean proximity, gps, auto brightness, and gyroscope don't work on my Galaxy note 8.
Does anybody know what should i do?
I also rebooted my phone.
When i am on Google maps, and turn the location sensor on, suddenly the phone find the location, after that, the sensors doesn't recognize the location.
it also happens for auto brightness sensor, when i unlock the phone, it works, suddenly it stops working and doesn't change.
I tried *#0*# none of the sensors values are changing.
I don't know what the problem is? Is it about the software or the hardware?
I updated the phone, rebooted it, but nothing happened.
Hey All,
Im from Sri Lanka and i too have the same issue Non of the sensors works. I gave the device for service and as for them Samsung asked them not to do any repair but to rerun the phones to Samsung Korea and give a full cash refund till the issue is sorted . Issue begins with a official Samsung Software update and it cannot be reversed. They have done main board replacement in one phone they got but the same issue has come aft the software update and its a issue for one production batch. May be Affecting Asia region.
I got a Sony Xperia z3c d5833. Yesterday I installed an app named pocket lock. The main feature of this app is to lock the screen when you cover the proximity and light sensor. Now the problem is just when I Uninstalled this app, the proximity sensor permanently switched ON automatically. And I can't view my screen during calls. I replaced the proximity sensor kit and also re-installed the firmware and went into stock mm6.0.1 from kit kat 4.4.4. Also installed the lollipop 5.1.1
But invain and the problem is still there. My proximity sensor kit which I replaced with another Xperia z3c is working fine in that phone.
I need help....
There is a problem with the display glass on the Z3C separating from the sensor, with an always ON sensor the result. Google and you'll find it.
You can test it in the service menu. It will show as ON, and go OFF if you lightly press on the top left corner of the display.
So you might have a hardware problem. Sometimes just glue the display corner down works.
There are also a few fixes that disable the sensor. You really do not need it. It is a battery saving feature.
sugarbrie said:
There is a problem with the display glass on the Z3C separating from the sensor, with an always ON sensor the result. Google and you'll find it.
You can test it in the service menu. It will show as ON, and go OFF if you lightly press on the top left corner of the display.
So you might have a hardware problem. Sometimes just glue the display corner down works.
There are also a few fixes that disable the sensor. You really do not need it. It is a battery saving feature.
Click to expand...
Click to collapse
All was going fine and fantastic until I installed this fckn app pocket lock ? there's no need to change the proximity sensor kit now because I already have changed it and the most interesting thing is that the faulty proximity sensor kit doing fine in another Xperia z3c. To assure myself that new kit should work fine in my phone I flashed it thrice with three different ROMS but nothing worked. Now I'm wondering how a software can damaged a phones motherboard. It means there's only two things left for me to change, Bootloader and motherboard. D5833's bootloader isn't allowed to be unlocked so therfore I can't upgrade the bootloader, now the only thing left is motherboard of my phone. .
So I bought this phone yesterday, stock and no third party app. did a factory reset inserted the simcard and recieved a sms. when screen was off, a green small notification was blinking on left upper part of screen (something like what third party apps like aodnotify do but it was better). I was amazed that samsung finally did something to fill the void of an actual notification Led. but after my second factory reset (after a 450 mb update) the feature was gone!!
I searched every where for it. tried different settings in Aod and edge light and... nothing
can anyone explain this to me? could it be an experimental feature on my stock firmware that was removed from latest update?
thanks in advance
I don't understand it either. I don't have it on screen off but I have it when I charge the phone or answer a call. Weird behavior.
That's being used as a proximity sensor I believe to turn the screen on and off during calls. It might also disable the screensaver/always on mode if the phone is face down.
thanks for the answers.
Edit: that's the proximity sensor as you said which lights up during calls, but I don't know why it was lighting up when there was no app running and the screen was off. odd behavior! perhaps accidental touch detection was acting incorrectly.