Hey guys I hope that I don't get beat up too bad for asking.. but i've searched and tried multiple things all with the same result.
I have a BL unlocked VZW Moto X 1060 running Cricket/Aio service. I'm using Philz Touch as a recovery currently.
My problem is that anytime I use a non-stock based rom I have an issue with my SMS messages failing immediately when trying to send them. I can receive them just fine. I've tried every rom in the moto rom list and the only non-stock based rom that works is Dirty Unicorns. I've tried the GSM fix for VZW phones found in a thread aimed at cm11 users. Ive tried changing my phone number attached to my sim but that has failed as well. The only things i've noticed between rom changes is that the roms that work show no number at all for my phone number under the phone info in settings (*#4636). The CM based roms read "unknown" for phone number and cannot be edited by root sim editor. I hope this wasn't too confusing. Can anyone point out what i'm doing wrong?
Related
like the title says ive tried all the roms in the development forum and i keep getting stuck at start up the only one that work is the sprint shipped rom
i think it all started when i tried updating roms to MaxSense UI Style found in this thread
http://forum.xda-developers.com/showthread.php?t=649841
i tried to update by the internal memory method, then it got stuck in the touch logo start up screen and since then the only rom that gets pass that screen is the stock sprint rom
any help will be greatly appreciated
Make sure you have a HardSPL version for CDMA or you will not be able to use custom roms on your device.(Assuming you are on CDMA since you posted this in the CDMA forum) Also make sure you have the correct Radio for your CDMA device, each carrier has their own radios for you to flash.
yea ive flashed my phone with custom roms before so everything should be good in that department atleast, i have no clue whats the issue tho, phones unclocked
o WOW....so i just flashed an old custom rom i was using, and it worked.....
anyone know if now its like a requirement to use MTTY to install the new roms that are out? and if it is would the task 29 command that re formats your phone delete whats on your internal memory too? that would be horrible might just keep this rom if thats the case
I never used MTTY to flash. And I flashed about.... 5 different roms to my phone last night(New roms). Maybe thats why I can't get a data connection? I called up sprint to get my PCS Vision username/password but he wouldnt give it to me and made me press dialer codes to try junk. but the unlock code had changed so we couldnt unlock that part. Anyways the phone is about... 2 years old and I have TEP on it, so they are sending me a BRAND NEW Sprint CDMA Diamond Touch. Will it have the same data issues if I flash custom roms on to that one as well? Do I need the PCS Vision info for Sprint?(Only connection is #777 for Sprint but no idea if I need the login settings)
did you tried installing the original shipped Rom for your phone? or maybe a custom rom made for sprint?
would be good to find the login settings just in case idk
I installed a custom rom MADE for sprint. when the phone starts up it does some sort of..... "Hands Free Activation" but always fails on the data part. saying the PCS Vision username/password is wrong when dialing #777.
I still cannot find out what my username and password would be without calling up sprint AGAIN. They are sending me a new phone and everything, but they have some sort of procedure to get it activated and make your data work I am guessing when I receive the new phone monday/tuesday.
Flash back to the stock ROM for sprint. 2.00* and activate, after that is done, you can flash to whatever ROM you want. I had to do this for my Diam500 and once it activated, I installed Moonscape's ROM and everything works perfect.
I've also never used MTTY nor have I had to do many of the suggested methods of what others' have said. I simply installed WMDC for Win 7 x64 Enterprise, updated all the drivers for my phone, unchecked "fast USB sync" on the phone and voila, I can flash anything.
Just my $0.02
try keeping the dial number #777
all other settings with everything blank
no password
IN the past, we have been able to easily flash roms made for International phones on TMO Devices.
The S5 was the best because the two phones were nearly identical and you could flash any international ROM on a TMO PHONE>
That is not the case now with the NOTE 4 and I hope someone can figure out a fix.
I flashed ECHO a new rom on Inrternational today and at first it wouldnt boot - so I switched the Boot Image with a TMO Kernel Boot Image and then I was able to flash - unfortunately DATA did work. (WIFE WORKS FINE)
When I tried to add my APNS - the eror message I got was 'Insert a Valid Sim". So I am at a a loss and hopeful that someone who is smarter than me can figure out what we need to do to flash International ROMS on N910t.
Aside from having to change the Kernel to a TMO Kernal - something else has to happen so the SIM Card is recognized. (after flashing ECHO, when I went to About Phone/Status - there was no IMEI number listed - which is, I am sure, at the root of the problem)
(FYI - I tried inserting a APN XML from a working TMO ROM and that didn't help at all) that was the only thing I could think of - obvious that I am not a dev, right?
So anyway - I am hoping someone has some ideas and can figure out what we need to do to make this work.
Any suggestions are greatly appreciated.
Just a guess: the rom you installed included a modem? AFAIK, you really never want to switch modems from the one you have from your carrier. If you have a nandroid you could try restoring your old original modem from it if that is the problem.
Sent from my SM-N910T using XDA Free mobile app
I have an XT1058 with the bootloader unlocked (via Sunshine) running version 30.B2 and the stock AT&T modem firmware. I have TWRP 2.8.7 in case anyone cares. I have SIM-unlocked the phone and am using it on T-Mobile. Everything works great but I'd like to get off the stock AT&T 5.1 ROM. However every custom ROM I've tried loses the ability to use the microphone in call (nobody can hear me unless I use speakerphone). Everything is working normally on stock ROM. I have probably read 20 different threads talking about this issue, many of which say something like "flash the modem firmware" or "update the bootloader version" without being any more specific. I've flashed plenty of ROMs on this device and others but have never tried doing it piecemeal before - I've always flashed the entire ROM.
This is the closest thing I have found to a solution but it's not very specific with instructions or how to:
https://forum.xda-developers.com/moto-x/general/5-1-speakerphone-bug-fixed-bootloader-t3186382
Plus the last poster in the thread has exactly the same question as me, and it has no response.
Bottom line - I do not want to lose unlocked bootloader or my SIM unlock. I suspect that I can re-use my SIM unlock code if I flash a modem but am not 100% sure.
This phone is my daily driver. So I need the phone calls to work. Making calls on speakerphone is not a good workaround.
But I really want to be able to use one of the custom Mashmallow or Nougat ROMs, or even the LOS ROM regardless of version so I can get away from the AT&T bloatware.
Anyone have a solution for this?
Hi. I got a serious trouble please some one help me. Strangely yesterday my xt 1254 ran out of service i checked but didn't find sim menu. And baseband unknown while imei was missing too. I rebooted device and all got ok sim worked badeband ok & imei shown. But the problem is after sometime( 1 or 2 hour later) my device again ran into same problm. And aftee that the problem continues for sometime baseband works after sometime it gets unknown no sim no imei please help me to get out of this. Thanks
Looks like no one helps noobs
Not that no one helps noobs, but not many people check here any more.
1) The real Droid Turbo forum is over at Moto Maxx, where all the updated Moto Quark custom ROMs are.
2) This phone is 4 years old. No one comes here anymore with a "new" problem. So, feel free to SEARCH for previous answers.
https://forum.xda-developers.com/search/forum/3715?query=baseband
3) Are you still running stock firmware? Is your bootloader unlocked and you're on a custom ROM? What version firmware are you running? You don't mention any of that, which may be relevant.
* If you're still on stock, the best thing to do is reflash same firmware or newer to reset the modem. Be very careful it's not older firmware, or you will brick the phone (if your bootloader is still locked).
* If you're running custom ROM, the best thing is to flash the BHB27 clear modem file in TWRP and then reflash your modem in TWRP. There's TWRP-FLASHABLE modem zip files available for all Moto QUARKS.
A single answer and i got all i want. Thank you chazzmatt. The problem was faulty baseband chip cz mistakenly my brother fell down the device. Repair guy said me he changed the chip and now all set. Thank you buddy and thanks xda
I am new to Android Custom ROM and everything. I got this phone from a local vendor and it was running a custom rom called "LamLazy Rom v3.0 Dual SIM" - I researched on it and figured it was used to convert N950N to N950F or something like that.
I have the EFS and TWRP complete backup of the LamLazy ROM. I wanted to try LineageOS 17.1 on my device and flashed it using TWRP. After the successful flashing, I noticed my phone can no longer connect with my network. I cannot make or receive phone calls. I tried every possible thing that I knew. Even flashed series of Custom ROMs, on every other rom I faced the same network issue.
However, when I revert back to LamLazy it works fine. I can use both of my SIM slots and my phone shows 2 IMEI's while on lineage and other it shows only one IMEI.
Now, my problem is I want to get rid of LamLazy and try new ROMs such as Pixel Experience and LineageOS, but my cellular network doesn't work. Can someone please help me with this? :crying:
HamzaSheikh said:
I am new to Android Custom ROM and everything. I got this phone from a local vendor and it was running a custom rom called "LamLazy Rom v3.0 Dual SIM" - I researched on it and figured it was used to convert N950N to N950F or something like that.
I have the EFS and TWRP complete backup of the LamLazy ROM. I wanted to try LineageOS 17.1 on my device and flashed it using TWRP. After the successful flashing, I noticed my phone can no longer connect with my network. I cannot make or receive phone calls. I tried every possible thing that I knew. Even flashed series of Custom ROMs, on every other rom I faced the same network issue.
However, when I revert back to LamLazy it works fine. I can use both of my SIM slots and my phone shows 2 IMEI's while on lineage and other it shows only one IMEI.
Now, my problem is I want to get rid of LamLazy and try new ROMs such as Pixel Experience and LineageOS, but my cellular network doesn't work. Can someone please help me with this? :crying:
Click to expand...
Click to collapse
i bought a note 8 from someone and it was running a custom os tried to iroall stock rom and i now i get emergency calls and cant register on any networks..my phone is only a single simcard phone but it shows two imei numbers now and one is 0000000 pleass help i dont even know how to post on xda sorry for hijacking your post