Hi,
Wanted to ask if this was a common problem. The 3.5mm socket on my Xperia has worn two pretty significant grooves into my headphone jack. It's now so bad that the right channel doesn't work half the time. The problem persists when I use the headphones in other devices to it's definitely managed to damage the heaphone jack.
I experimented with the included microphone lead and it has also managed to scar that a little so I immediately stopped using it.
Has anyone else encountered this problem? FYI the headphones are AKG K414P.
Thanks
Tome
The socket sucks. It ALMOST broke my in-ear headphone's jack. It's too tight.
yeah the socket is really tight on mine as well, haven't streaked any headphones yet though, maybe I haven't used them enough?
I have something like this. I think I have the same problem.
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
That's what happened to me. Be sure to grab that rubber very tightly.
ksian said:
I have something like this. I think I have the same problem.
Click to expand...
Click to collapse
Same problem here, i think this is a common problem on all XPERIA. The socket is too damn tight.
Anyway once you know that you start taking care and you won't break anything. And it's clearly an advantage that it's so tight, if you're using big headphones and your X1 slips out of your hand, it won't touch the ground (Assuming the cable is not too long and you ain't too small ). I like this.
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
tome_1 said:
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
Click to expand...
Click to collapse
I DO have BOTH problems. My plug has quite deep scratches. But no loss of audio so far. I think this will get better with time, the socket will also lose some material If your headphones are expensive and break quickly (and you absolutely want to keep your X1 as Mp3player) you might want to use a very small extension cord to avoid damage to the headphones themselves. Extensions of say 2" exist.
dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
Same thing it did to mine, killing my Creative Aurvanas's 3.5mm jack rubber housing. They still work but the rubber is loose.
Ah well, because of that I am actually looking at some Shure E530's (the Xperia is a pretty good source IMO). They have a detachable extension cord so i can use a L-plug instead of a straight plug.
Really, use L-plugs, they are a lot more durable against the tight socket. Its just because the sound is really great for a phone, hell, I bet its better than most MP3 players, else i would be very mad, killing my favourite IEM's . Very clean sound, although sensitive IEM's will hiss but that is expectable from such a 'noisy' thing like a fully packed-with-features phone.
But hey, a tight socket is better then a loose socket, or a proprietary extension cord like the HTC's.
Apart from killing my Aurvana's I still think the 3.5mm socket is High Quality Stuff. It just feels 'right' when you plug in your IEM's/headphones.
Keep in mind that you shouldn't keep the extension plugged in all the time because the phone actually detects this and routes certain sound events from the speaker to the headphones. For instance if you pick up a call with the extension plugged in but no headphones, you will not be able to hear the caller.
yeah i was thinking that i might have to make/buy a short extension to save my expensive headphones
it's like you guys are saying, the sound is good enough that i want to put good headphones on so i'll have to find a way to protect them. I wonder if the included handsfree extension is resistant to the phone's socket?
I use the stock extension. It gets scratched as well (have xperia for 2 months). As for the sound quality, I'm thinking about repairing my good old Ipod nano for listening mp3's. I do think, that it has better sound quality and more than that the battery of the phone won't die out so fast (playing music for about 2 hours a day).
Lol. Would not have noticed this without you guys. Who would look at their earphone jacks? Either they are very bored or something about their earphones is screwed up.
Does other HTC phones have these problems? Oh wait, only the THD has 3.5mm.
The jack has ground grooves into the jack on every single pair of earphones I own,and based on this alone, I'd say SE, give me my freakin money back!
Is it serious? Probably not. But is it supposed to do that? Hell no.
I don't want to use the stock extension cable, otherwise I wouldn't choose a phone with a 3.5mm jack, Jesus bleeping Christ.
I have the same problem here. I used a nokia handsfree and after 2 days I had that scratches and sometimes I couldn't here well, the sound was faded and i had to turn the jack in a certain position. Today I tried an Iphone handsfree and it doesn't work well..
I don't know why... Is it to thin? It's new but the sound is faded. I don;t get it? Has anybody tried this apple headphones? (The one with microphone, so 3 stripes on the jack)
LATER POST: I TRIED ANOTHER HEADPHONES AND THE SAME BLURED SOUND...SO I GUESS MY SOCKET IT'S SCREWED
well, then again the apple handsfree is thiner i guess, because i tried some Lg headphones and they were ok. the apple headphones are functioning conected on laptop. I don't know what to believe... I really wanted to use the apple stuff on this phone, i should buy an extender.
use your xperia handfree as an extension, have been doing that for over a year now, and even though it's scratched like hell, it works fine, without damaging my beats
Could you please tell me wich model of headphones by SE are they? I mean the x1 headphones.
I found out that iphone's 3.5mm socket is not like the others so the x1 is not like the others and maybe that;s the reason i can;t use the apple headphones.
ok...got it.."If they have a mic, then they're useless for anything but an iPhone.
Apple decided rather than follow the industry standard of Right/Left/Mic/Ground, they would make their own up. They chose to make their socket Right/Left/Ground/Mic, which means your N900 is trying to ground the headphones through the mic, which clearly will not work.
In short, they won't work on anything except an iProduct."
It seems that my galaxy tab's 3.5mm headphone jack will not work when plugged in all the way. if I leave may be 2-3mm out then it will work. Does anyone has similar problem?
lettcco said:
It seems that my galaxy tab's 3.5mm headphone jack will not work when plugged in all the way. if I leave may be 2-3mm out then it will work. Does anyone has similar problem?
Click to expand...
Click to collapse
Thats usually a sign of a worn out/damaged/dirty jack (or plug). That can easily happen if you plug in/out headphones a lot, or even if the headphone jack gets banged around while plugged in.
Never had any probs with mine in almost a year.
I'd make sure its not the headphones by trying a different pair first. If its not the headphones, then you could try cleaning the jack - or sending it to Samsung for repair (should still be under warranty)
I have 2 z3c's. The first one (black) has a broken magnetic charging port. Everything else is perfect.
Because I hate the USB charging flaps, I bought a 2nd z3c second-hand. It worked fine for a few weeks, now when I plug in headphones it only plays from one side (whether it's music or in-call). The stereo speakers work fine when no headphones are in.
Have tried multiple headphones, all the same issue. Assume it's an audio jack problem - any ideas?
Looks like audio jack problem by your description.
The contacts are visible inside with direct light pointed into the jack, you can check what's wrong visually. Might be just a bent contact, and precise work with sewing needle might cure it. Might be something broken, and then no good suggestions besides using BT headphones. Or, if you have good headphones and just want a BT adapter, maybe something like this.
So my headphone jack packed in today, but I was thinking.
Can I use an OTG device (micro usb to 3.5mm) to utilize audio provided im on Lollipop? (idk if its on older versions)
I havent got the money or time at the moment to replace it, i just need a cheap alternative to last me until I do. Thanks!
Plasma Shadow said:
So my headphone jack packed in today, but I was thinking.
Can I use an OTG device (micro usb to 3.5mm) to utilize audio provided im on Lollipop? (idk if its on older versions)
I havent got the money or time at the moment to replace it, i just need a cheap alternative to last me until I do. Thanks!
Click to expand...
Click to collapse
Could you describe your problems with headphone jack? Probably we are facing the same issue. For example, my proximity and ambient light sensors are working, but headphones aren't (sensors are attached to the headphone connector). Replacement part arrived today, I replaced it, and my headphones still aren't working. Actually, they do, but the volume is so low, I almost can't hear anything.
terirem said:
Could you describe your problems with headphone jack? Probably we are facing the same issue. For example, my proximity and ambient light sensors are working, but headphones aren't (sensors are attached to the headphone connector). Replacement part arrived today, I replaced it, and my headphones still aren't working. Actually, they do, but the volume is so low, I almost can't hear anything.
Click to expand...
Click to collapse
My headphone jack just doesnt work, everything else seems to. If i push down on the headphone wire when in the jack i get audio out of one ear but thats it. I resorted to buying a pair of bluetooth headphones. They work amazingly.
Plasma Shadow said:
My headphone jack just doesnt work, everything else seems to. If i push down on the headphone wire when in the jack i get audio out of one ear but thats it. I resorted to buying a pair of bluetooth headphones. They work amazingly.
Click to expand...
Click to collapse
Exactly the problems I'm facing with, and I think I'll solve it the same way you did.
Hey all,
So I searched the forum and found quite a few headphone port issues discussed, but no mention of my exact problem. And yes, I looked inside my port and scraped around with a toothpick... there is nothing immediately obvious obstructing the port- hence the need for my post
My headphone port seems to be short on depth. I have a pair of headphones with an inline mic. There are perfectly fine for listening to music (they even snap into place as they should). But the mic doesn't work. I don't use that often so i forgot about it.
Well the other day I bought a selfie stick (I know... I know... don't kick me! My fiance and I travel a lot and sometimes it is impossible to find someone to take a photo for you in front of a landmark). I bought a wired one to avoid the battery drain of BT (which I don't use much except in the car). Well, the shutter button on the stick doesn't work with my N6. I have 5 camera apps installed and all have the volume buttons mapped to the shutter...I tried it with my fiance's LG G4 and my old GS2, it works on both of them.
So while trying to trouble shoot this issue, I plugged my headphones into her phone and made a call... low and held, the mic worked. Next I searched the forums and Google and found the issues of clogged ports. Mine isn't. And I used a bright halogen light to peer inside. Nothing but port. So I measured it.
Here is the interesting part, my first measurements just involved watching how far the jack entered the port. I tried my phone, my S2 and the LGG4... the S2 and the G4 both ingested the entire jack. My N6, about 1mm was left out. So I measured by inserting a tooth pick and measuring how far it went in, sure enough, my N6 is about 1mm shallower then the others.
I did find one post here on XDA where people suggested that you had to press very hard to fully insert a jack. I tried, I nearly broke the headphones in the attempt... and no change.
Has anyone else had this exact issue? Were you able to solve it?
Has anyone attempted to replace the port?
Just a bump...
Anyone? TIA
Those mics don't tend to work in most cases if they work on an iphone vice versa, there are converters on dx.com as example. Sony headphones are known to work fine on android phones, I got a sony mdr-1 with an inline mic and controls that works fine on my n6.
If you want I can send pictures of the headphone jack connector when the back panel is removed, my back panel is currently loose after replacing the battery and I'm still waiting for the replacement ^^
seahorsepip said:
Those mics don't tend to work in most cases if they work on an iphone vice versa, there are converters on dx.com as example. Sony headphones are known to work fine on android phones, I got a sony mdr-1 with an inline mic and controls that works fine on my n6.
If you want I can send pictures of the headphone jack connector when the back panel is removed, my back panel is currently loose after replacing the battery and I'm still waiting for the replacement ^^
Click to expand...
Click to collapse
Sure, the photo would be great.
The headphones I have work on two other Android devices, as well as the selfie stick. So it doesn't appear to be a comparability issue with Android.
Thanks!
So,
When I had a Moto X (V2) I asked moto about the volume controls and was told that they did not implement them, as it was not an Android standard feature. My guess it that it is the same with the Nexus 6 (I now use bt headphones, so haven't tried). My guess is that the microphone doesn't work on your headphones (try another set) and that the volume control over the headphone jack is not implemented.
Note10.1Dude said:
So,
When I had a Moto X (V2) I asked moto about the volume controls and was told that they did not implement them, as it was not an Android standard feature. My guess it that it is the same with the Nexus 6 (I now use bt headphones, so haven't tried). My guess is that the microphone doesn't work on your headphones (try another set) and that the volume control over the headphone jack is not implemented.
Click to expand...
Click to collapse
Hey Note Dude.
Thanks for responding. It's an interesting theory, but I have an inline volume control on this headset that does indeed adjust the volume. So, it's really just the mic.
Thanks, though!