Database Develop

Quick question about returning to stock.

Hi guys,
I just wanted to confirm with you in how to return stock.
From what I have been reading, to return to stock, the easiest way is to grab the MythTools here:
http://forum.xda-developers.com/showthread.php?t=2262726
Download the JB stock ¿SBF? here:
http://sbf.droid-developers.org/dinara/list.php
And use the tool. That's it? And then re root and re unlock right?

neondunker said:
Hi guys,
I just wanted to confirm with you in how to return stock.
From what I have been reading, to return to stock, the easiest way is to grab the MythTools here:
http://forum.xda-developers.com/showthread.php?t=2262726
Download the JB stock ¿SBF? here:
http://sbf.droid-developers.org/dinara/list.php
And use the tool. That's it? And then re root and re unlock right?
Click to expand...
Click to collapse
Please just do it the fastboot way...just too many help threads that incluce "I used MythTools". Once you do it manually and you know your PC is set up properly, then start using Myth.

neondunker said:
Hi guys,
I just wanted to confirm with you in how to return stock.
From what I have been reading, to return to stock, the easiest way is to grab the MythTools here:
http://forum.xda-developers.com/showthread.php?t=2262726
Download the JB stock ¿SBF? here:
http://sbf.droid-developers.org/dinara/list.php
And use the tool. That's it? And then re root and re unlock right?
Click to expand...
Click to collapse
as @skeevydude told, its better to use fastboot... this may be useful to you..
1)download the required firmware from here and recovery
2)extract the zip and place the recovery image and fastboot binaries in the extracted directory and open terminal in this directory.
3)type the following commands in order
Quote:
fastboot flash modem NON-HLOS.bin
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot erase cache
fastboot reboot-bootloader
fastboot flash recovery cwmrecovery6028-xt925_20130219-epinter.img
fastboot reboot

skeevydude said:
Please just do it the fastboot way...just too many help threads that incluce "I used MythTools". Once you do it manually and you know your PC is set up properly, then start using Myth.
Click to expand...
Click to collapse
It worked the "fastboot" way, thanks !

Aingaran said:
as @skeevydude told, its better to use fastboot... this may be useful to you..
1)download the required firmware from here and recovery
2)extract the zip and place the recovery image and fastboot binaries in the extracted directory and open terminal in this directory.
3)type the following commands in order
Quote:
fastboot flash modem NON-HLOS.bin
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot erase cache
fastboot reboot-bootloader
fastboot flash recovery cwmrecovery6028-xt925_20130219-epinter.img
fastboot reboot
Click to expand...
Click to collapse
If you want to get good at it have a folder for development with everything in there and point the command line path to the commands so you don't have to keep tabs on where you are
Sent from my MB886 using Tapatalk 4 Beta

Another question, there's any way to improve stock without breaking everything else? I know I can freeze apps, block another, etc, but besides that, anything else?
Also, there's any risk by flashing the Mexican version and then turning back to AT&T (in case I don't like it)?

No risks man. I've flashed dozens of times.
Sent from my MB886 using Tapatalk 4 Beta
---------- Post added at 11:36 AM ---------- Previous post was at 11:36 AM ----------
Just backup your stuff to the EXT SD card not the internal one , just in case it gets wiped.
Sent from my MB886 using Tapatalk 4 Beta

neondunker said:
Another question, there's any way to improve stock without breaking everything else? I know I can freeze apps, block another, etc, but besides that, anything else?
Also, there's any risk by flashing the Mexican version and then turning back to AT&T (in case I don't like it)?
Click to expand...
Click to collapse
there are no risks as @Youngunn2008 told, i too have flashed it innumerous times.. and about improvement, you can always work on it, some common things are system app modifications as you told like freeezing, removing, adding etc and performance modifications like editing build.prop or working on kernel or editing framework_res.apk etc

Thanks for your help, right now I'm with the mexican version and will start to play
The radio thing it's necesary or only if I have issues with 3g/wifi? And I have issues, will help flashing the mexican radio or should I flash the AT&T radio?

Its your wish... I recommended Mexican retail radio because it supports more base bands than att and on the whole, both should work fine... And the radio is VERY VERY IMPORTANT...
Sent from my MB886 using xda app-developers app

Everything mexican now and its more speedy than the ATT version (don't mind LTE)
Thanks!

[Q] CDN Rogers 1058 with FR 4.4.2 Update to 4.4.4 fails

Hi everybody,
I have an canadian Rogers Moto X 1058 which I use here in Europe. To get european languages & the 4.4.4 Update I went back to Stock Recovery & French 4.4.2 (RETAIL-FR_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml.zip).
Then I wanted to update via OTA to 4.4.4 but it failed. Doing this via adb sideload it also fails with this error:
"/modem/image/dsps.b00" has unexpected contents"
What I did by flashing the french 4.4.2 was replacing the NON-HLOS.bin and fsg.mbn with the ones from the Rogers 4.4.2 to have Radio / Modem working with the Hardware.
What can I do now to get 4.4.4, please?
a) Flashing the Verizon 4.4.4 over my 4.4.2 like mentioned here http://forum.xda-developers.com/moto-x/general/update-moto-x-mexico-to-4-4-4-vzn-firm-t2828190 and using the Rogers Modem Files again
or
b) should I flash the french 4.4.2 again with the french Modem Files for the 1052, then update to french 4.4.4 via adb side load & then flash the Rogers 4.4.2 Modem Files via adb afterwards before rebooting?
Any help about this riddle would be appreciated

yeticomes said:
Hi everybody,
I have an canadian Rogers Moto X 1058 which I use here in Europe. To get european languages & the 4.4.4 Update I went back to Stock Recovery & French 4.4.2 (RETAIL-FR_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml.zip).
Then I wanted to update via OTA to 4.4.4 but it failed. Doing this via adb sideload it also fails with this error:
"/modem/image/dsps.b00" has unexpected contents"
What I did by flashing the french 4.4.2 was replacing the NON-HLOS.bin and fsg.mbn with the ones from the Rogers 4.4.2 to have Radio / Modem working with the Hardware.
What can I do now to get 4.4.4, please?
a) Flashing the Verizon 4.4.4 over my 4.4.2 like mentioned here http://forum.xda-developers.com/moto-x/general/update-moto-x-mexico-to-4-4-4-vzn-firm-t2828190 and using the Rogers Modem Files again
or
b) should I flash the french 4.4.2 again with the french Modem Files for the 1052, then update to french 4.4.4 via adb side load & then flash the Rogers 4.4.2 Modem Files via adb afterwards before rebooting?
Any help about this riddle would be appreciated
Click to expand...
Click to collapse
Since you have already changed ROMs (I normally don't suggest doing this), here is my recommendation:
You can flash the entire French 4.4.2 again (baseband and all) and then accept the OTA to 4.4.4.
Keep in mind that you can omit the "erase userdata" command and it will preserve your data and apps.
Also note that we have received reports that using a 4.4.2 modem with a 4.4.4 ROM has resulted in issues for some. This includes no signal, or even missing IMEI. So I really would not suggest flashing a 4.4.2 baseband after you accept the OTA. If you really want to be on the Rogers baseband (keeping in mind that there is no need to do so - the FR baseband should work fine for you...), you will need to wait until the 4.4.4 full SBF for Rogers is released.
Good Luck.

samwathegreat said:
Since you have already changed ROMs (I normally don't suggest doing this), here is my recommendation:
You can flash the entire French 4.4.2 again (baseband and all) and then accept the OTA to 4.4.4.
Keep in mind that you can omit the "erase userdata" command and it will preserve your data and apps.
Also note that we have received reports that using a 4.4.2 modem with a 4.4.4 ROM has resulted in issues for some. This includes no signal, or even missing IMEI. So I really would not suggest flashing a 4.4.2 baseband after you accept the OTA. If you really want to be on the Rogers baseband (keeping in mind that there is no need to do so - the FR baseband should work fine for you...), you will need to wait until the 4.4.4 full SBF for Rogers is released.
Good Luck.
Click to expand...
Click to collapse
Thank you Sam, seems that there is hope
Regarding the use of the 1052 ROM - it was only because of the languages :-/ Didn't know that I can use the european Modem Files with the canadian Hardware - so for now I'll take the ones from the french 4.4.4 OTA.
Before I'll re (m)fast boot the french 4.4.2 again - which steps should I leave out, to keep my user data, please?
Code:
sudo fastboot oem fb_mode_set
sudo mfastboot flash partition gpt.bin
sudo mfastboot flash motoboot motoboot.img
sudo mfastboot flash logo logo.bin
sudo mfastboot flash boot boot.img
sudo mfastboot flash recovery recovery.img
sudo mfastboot flash system system.img
sudo mfastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo mfastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
sudo fastboot oem fb_mode_clear
Only this ones are to delete or all the stuff which is not an .img?
Code:
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
You helped me very much! Thank you! Maybe you can agai just help me with these fast boot questions, please?

yeticomes said:
Thank you Sam, seems that there is hope
Regarding the use of the 1052 ROM - it was only because of the languages :-/ Didn't know that I can use the european Modem Files with the canadian Hardware - so for now I'll take the ones from the french 4.4.4 OTA.
Before I'll re (m)fast boot the french 4.4.2 again - which steps should I leave out, to keep my user data, please?
Code:
sudo fastboot oem fb_mode_set
sudo mfastboot flash partition gpt.bin
sudo mfastboot flash motoboot motoboot.img
sudo mfastboot flash logo logo.bin
sudo mfastboot flash boot boot.img
sudo mfastboot flash recovery recovery.img
sudo mfastboot flash system system.img
sudo mfastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo mfastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
sudo fastboot oem fb_mode_clear
Only this ones are to delete or all the stuff which is not an .img?
Code:
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
You helped me very much! Thank you! Maybe you can agai just help me with these fast boot questions, please?
Click to expand...
Click to collapse
Glad to help. The only line that is necessary to leave out is "fastboot erase userdata".

samwathegreat said:
Glad to help. The only line that is necessary to leave out is "fastboot erase userdata".
Click to expand...
Click to collapse
Cool, your support is a dream! Will try it immediately & post when its done!

samwathegreat said:
Glad to help. The only line that is necessary to leave out is "fastboot erase userdata".
Click to expand...
Click to collapse
Hmm, did so & now my Moto X has no longer a Mobile Network connection?! I am on 4.4.2 and only Wifi is working - what can I do?
Should I reflash the Rogers 4.4.2 Modem files? Should I re-do all commands & just exchange the files?
or is it possible to use only these commands to update the Modem?
Code:
sudo fastboot oem fb_mode_set
sudo mfastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo mfastboot flash fsg fsg.mbn
sudo fastboot oem fb_mode_clear
Or any other solution, please?
http://d.pr/i/woyv

Ufff ... seems that below worked for me :good:
yeticomes said:
Hmm, did so & now my Moto X has no longer a Mobile Network connection?! I am on 4.4.2 and only Wifi is working - what can I do?
Should I reflash the Rogers 4.4.2 Modem files? Should I re-do all commands & just exchange the files?
or is it possible to use only these commands to update the Modem?
Code:
sudo mfastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo mfastboot flash fsg fsg.mbn
Or any other solution, please?
http://d.pr/i/woyv
Click to expand...
Click to collapse

yeticomes said:
Ufff ... seems that below worked for me :good:
Click to expand...
Click to collapse
Excellent. I was just getting ready to reply that you did a great job with those commands (that's EXACTLY the commands needed to change basebands).
Great Job. Glad everything worked out. :good:

samwathegreat said:
Excellent. I was just getting ready to reply that you did a great job with those commands (that's EXACTLY the commands needed to change basebands).
Great Job. Glad everything worked out. :good:
Click to expand...
Click to collapse
Thanks a lot - was a little bit in a hurry because I had to leave home for some hours and the Mobile Network was gone

I got missing IMEI.

Himanshudud said:
I got missing IMEI.
Click to expand...
Click to collapse
Is this directly related to this thread subject?
If not... I suggest searching for a similar thread issue, or starting a new one.... Otherwise this is called thread hijacking. ?
If it is related to the info on this thread... Can you be more specific? What you did before that happened, what model and firmware you are on... Etc.

KJ said:
Is this directly related to this thread subject?
If not... I suggest searching for a similar thread issue, or starting a new one.... Otherwise this is called thread hijacking. ?
If it is related to the info on this thread... Can you be more specific? What you did before that happened, what model and firmware you are on... Etc.
Click to expand...
Click to collapse
I am new to talpatalk. I was trying to reply to previous comment.
---------- Post added at 04:51 PM ---------- Previous post was at 04:47 PM ----------
samwathegreat said:
Since you have already changed ROMs (I normally don't suggest doing this), here is my recommendation:
You can flash the entire French 4.4.2 again (baseband and all) and then accept the OTA to 4.4.4.
Keep in mind that you can omit the "erase userdata" command and it will preserve your data and apps.
Also note that we have received reports that using a 4.4.2 modem with a 4.4.4 ROM has resulted in issues for some. This includes no signal, or even missing IMEI. So I really would not suggest flashing a 4.4.2 baseband after you accept the OTA. If you really want to be on the Rogers baseband (keeping in mind that there is no need to do so - the FR baseband should work fine for you...), you will need to wait until the 4.4.4 full SBF for Rogers is released.
Good Luck.
Click to expand...
Click to collapse
Exactly when I changed the firmware version I got missing IMEI error. Mobile fails to detect network.

Himanshudud said:
I am new to talpatalk. I was trying to reply to previous comment.
---------- Post added at 04:51 PM ---------- Previous post was at 04:47 PM ----------
Exactly when I changed the firmware version I got missing IMEI error. Mobile fails to detect network.
Click to expand...
Click to collapse
Well, ideally, having a nandroid backup of your EFS is ALWAYS a good idea.
But without that, you can try to restore the stock firmware for your model/carrier and same android version. Do not downgrade! Like so many have done.... If you flashed a different carriers firmware, and a higher version that your carrier has available....then have big issues, You may be putting the phone away and waiting for files you can flash for your model... On the same version of android you are now on.

I flashed 4.4.3 and got no IMEI. While downgrading with 4.4.2 got gpt.bin error. And again no IMEI. Then I flashed every other file of 4.4.2 except gpt.bin and now on 4.4.2 with IMEI back. But afraid to take ota update. And now waiting for full firmware file to leak.

Himanshudud said:
I flashed 4.4.3 and got no IMEI. While downgrading with 4.4.2 got gpt.bin error. And again no IMEI. Then I flashed every other file of 4.4.2 except gpt.bin and now on 4.4.2 with IMEI back. But afraid to take ota update. And now waiting for full firmware file to leak.
Click to expand...
Click to collapse
Glad it's back.... And no.... I would never take an OTA again.... To be safe.
You're not missing anything special... And I'm sure flashable files won't take too long.

KJ said:
Glad it's back.... And no.... I would never take an OTA again.... To be safe.
You're not missing anything special... And I'm sure flashable files won't take too long.
Click to expand...
Click to collapse
i know just some minor update to camera and dial pad.

{HELP} No signal/baseband EE

Ok, so I unboxed my new phone UK (XT1092), unlocked the bootloader after it updated to Lollipop, and messed up somewhere causing me to have to install stock rom again. After installing the stock rom (4.4.4) I do not have signal and the baseband is unknown as with the OP. I have attemped to follow multiple guided concerning the same fixes but have gotten no where and am now extremely stressed and confused. Previously if I had problems with signal I just reflash a radio but times seem to have changed. The phone now shows as a xt1095 when plugged into pc.
Where I went having messed up:
Where I then went having found I had a xt1092
Update on xt1092 worked! I did this:
1. Downloaded the 4.4.4 system image from xt1905 (first post for download link)
2. Extracted the zip
3. flashed over mfastboot.exe
Code:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
4. sideloaded the OTA update from first post
5. reboot
6. flashed back the original modem and fsg from xt1902, without erasing modemst1 and modemst2 -> https://www.androidfilehost.com/?fid=95784891001608300
Click to expand...
Click to collapse
Then realising I had no signal I followed this post:
YES!
I finally have Lollipop on my XT1092!!
I followed steff999's guide but encountered several problems with the modem and data connections etc.
I just couldn't figure out why flashing the XT1092 modem files didn't work.
Then I went back to my original firmware and did the procedure again.
But now I did not let it boot after the OTA Update and directly booted into fastboot mode and flashed the modem and fsg files.
Then after reboot I immediately had mobile service. IMEI and Baseband is back again.
I use Linux and it is very easy with Linux.
In a terminal just go to the folder with the files (no matter where they are!!).
After getting Android SDK I did:
Code:
$ sudo apt-get install android-tools-fastboot <<-- to install fastboot
$ cd /directory with your files...<<--- choose your folder
$ fastboot flash logo logo.bin
etc
after flashing the files put OTA.zip on phone. Go in recovery mode and apply update.
Then when it reboots directly go in fastboot mode and type:
$ cd /directory with your XT1092 modem files/
$ fastboot flash modem NON-HLOS.bin
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
now it boots into lollipop and it should recognize your sim card.
This is how it worked for me with Linux. Should be similar with Windows but I think the files for flashing have to be in fastboot directory then.
I did not use erase modem commands
I hope this will give hope back to people who encountered similar problems with the modem. I was about to give up but decided to give it a last try.
Click to expand...
Click to collapse
I am unsure how to get the OTA update onto the phone memory unless I power up and download, attempt at sideloading via adb resulted in the phone "aborting" at 100% sent.
So, could someone here please attempt to explain exactly what needs to be done
Currently about phone:
Android version: 5
Baseband version: unknown
System: 22.21.11.victara_tmo.tmo.en.US.retgb
Build number: LXE22.46-11
kernal: 3.4.42-gd7d30ea
Please.

Use multi tool for moto x. Google it
---------- Post added at 04:31 AM ---------- Previous post was at 04:31 AM ----------
THE-M1GHTY-BUKO said:
Ok, so I unboxed my new phone UK (XT1092), unlocked the bootloader after it updated to Lollipop, and messed up somewhere causing me to have to install stock rom again. After installing the stock rom (4.4.4) I do not have signal and the baseband is unknown as with the OP. I have attemped to follow multiple guided concerning the same fixes but have gotten no where and am now extremely stressed and confused. Previously if I had problems with signal I just reflash a radio but times seem to have changed. The phone now shows as a xt1095 when plugged into pc.
Where I went having messed up:
Where I then went having found I had a xt1092
Then realising I had no signal I followed this post:
I am unsure how to get the OTA update onto the phone memory unless I power up and download, attempt at sideloading via adb resulted in the phone "aborting" at 100% sent.
So, could someone here please attempt to explain exactly what needs to be done
Currently about phone:
Android version: 5
Baseband version: unknown
System: 22.21.11.victara_tmo.tmo.en.US.retgb
Build number: LXE22.46-11
kernal: 3.4.42-gd7d30ea
Please.
Click to expand...
Click to collapse
Use multi tool for moto x. Google it

Jazznax said:
Use multi tool for moto x. Google it
---------- Post added at 04:31 AM ---------- Previous post was at 04:31 AM ----------
Use multi tool for moto x. Google it
Click to expand...
Click to collapse
The multi-tool did not work for me aside from rerooting after the problem was solved. Thanks anyway.
This thread can now be removed.

[Q] Dead Moto X 1097 AT&T

I will be honest wit you people, I really mess up on my phone.
I was trying to upgrade to lollipop on my AT&T moto X.
I miss the step that I need to unlock my bootloader, so I just came directly to install the pure edition Brazilian rom.
When the phone restart I notice that my phone was not reading my simcard, and It is because my EFS file was deleting and Now I dont have IMEI...
Unfortunately I did not backup my EFS file.
Now my radio is not working, I did already search on all the webs a solutions but I with no luck.
Can anybody help me please!

How did you flash the ROM? Via fast boot? If that's the case you only mess with the modems. Try to download the firmware of at&t and flash the modem and the fsg files. Same happened to me when I converted my Moto x 1097 to 1095. Is not that bad just try my guide http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693

juliospinoza said:
How did you flash the ROM? Via fast boot? If that's the case you only mess with the modems. Try to download the firmware of at&t and flash the modem and the fsg files. Same happened to me when I converted my Moto x 1097 to 1095. Is not that bad just try my guide http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693
Click to expand...
Click to collapse
Thank you very much for answering.
To be honest I was not able to fash the rom.
But I will go and try to install the stock room.
pd: where is the stock rom from AT&T? I was not able to find it

feli37 said:
Thank you very much for answering.
To be honest I was not able to fash the rom.
But I will go and try to install the stock room.
pd: where is the stock rom from AT&T? I was not able to find it
Click to expand...
Click to collapse
How did you update then? Side load update? The problem you have is the modem as I said, nothing more
here is the firmware 4.4.4 of AT&T http://pan.baidu.com/wap/link?uk=3927248220&shareid=4222363237&third=0 unzip the file and try to flash the modems via fastboot, that should be enough.

juliospinoza said:
How did you update then? Side load update? The problem you have is the modem as I said, nothing more
Click to expand...
Click to collapse
I did try with on the motorola page, but it said that my phone is not compatible to unlock, so I just try installing the braziliam rom, In the process the phone shows a few error and when it restore there was not signal until I realize that I do not have IMEI on it.

feli37 said:
I did try with on the motorola page, but it said that my phone is not compatible to unlock, so I just try installing the braziliam rom, In the process the phone shows a few error and when it restore there was not signal until I realize that I do not have IMEI on it.
Click to expand...
Click to collapse
Do you have knowledge of fatboot and bootloader ? in that case unzip the file of your firmware in the same carpet you have the adb and fastboot files, be sure your phone is on "USB debugging mode" and plug your phone to your PC (phone must be power on), then type
adb devices (to see if the phone is recognized)
adb reboot bootloader (to reboot into bootloader)
fastboot devices (to see if the phone is recognized in fastboot, because sometimes it doesnt)
fastboot erase modemst1 (delete the old modems)
fastboot erase modemst2 (delete the old modems)
fastboot flash modem NON-HLOS.bin (flash the modems of your phone model)
mfastboot flash fsg fsg.mbn (flash the modem of your phone model)
mfastboot reboot
After the reboor you will have signal again after a couple of minutes, and of course your IMEI is back too.
hope it helps

juliospinoza said:
Do you have knowledge of fatboot and bootloader ? in that case unzip the file of your firmware in the same carpet you have the adb and fastboot files, be sure your phone is on "USB debugging mode" and plug your phone to your PC (phone must be power on), then type
adb devices (to see if the phone is recognized)
adb reboot bootloader (to reboot into bootloader)
fastboot devices (to see if the phone is recognized in fastboot, because sometimes it doesnt)
fastboot erase modemst1 (delete the old modems)
fastboot erase modemst2 (delete the old modems)
fastboot flash modem NON-HLOS.bin (flash the modems of your phone model)
mfastboot flash fsg fsg.mbn (flash the modem of your phone model)
mfastboot reboot
After the reboor you will have signal again after a couple of minutes, and of course your IMEI is back too.
hope it helps
Click to expand...
Click to collapse
Ok ok I will try that later because I am at work right now.
I will let you know if it works.
Thank you!!!

juliospinoza said:
Do you have knowledge of fatboot and bootloader ? in that case unzip the file of your firmware in the same carpet you have the adb and fastboot files, be sure your phone is on "USB debugging mode" and plug your phone to your PC (phone must be power on), then type
adb devices (to see if the phone is recognized)
adb reboot bootloader (to reboot into bootloader)
fastboot devices (to see if the phone is recognized in fastboot, because sometimes it doesnt)
fastboot erase modemst1 (delete the old modems)
fastboot erase modemst2 (delete the old modems)
fastboot flash modem NON-HLOS.bin (flash the modems of your phone model)
mfastboot flash fsg fsg.mbn (flash the modem of your phone model)
mfastboot reboot
After the reboor you will have signal again after a couple of minutes, and of course your IMEI is back too.
hope it helps
Click to expand...
Click to collapse
I found the at&t modem NON-Hlos.img but I can't find the fsg fsg.bn. and the first one is not working.
could you please be so kind to tell me where can I find those files please

RESOLVED!!!!
OK, let me tell you what I did.
I follow the steps that you gave me but it did not work.
Then I tryed installing the at&t room but it just mess more the things, because when I reboot the phone it went straight to the boot loader, and I was not able to turn on the phone. at this time I was really scared xD
so I create a new folder with the at&t room and the fastboot.
open fastboot and start flashing all the files in the folder, but this time I did not flashed the non-hls neifghter the fsg file.
then I just reboot the phone and read the sim card quickly.
THANK YOU SO MUCH!!!
you save my life. I really appreciate your help.

No Voice calls after flashing stock rom

Hey folks! I need some help here.
First, my device is an Moto G6 XT1925-3 and I'm using PPS29.55-37-7 stock rom.
I've unlocked my bootloader but I had problems doing this, so I flashed the same rom. After this, I successfully rooted my device but, normal calls through 4g/3g are working without any sound.
WhatsApp calls, or any media app is working properly, only calls trough 4g/3g are muted.
My question is: can I flash only modems partitions? I don't wanna loose any data and personal files.
If I go to settings>about phone my IMEI is listed normally. 4g volte is enabled. Data connection is perfect.
Recently Motorola has launched a new software, PPSS29.55-37-7-2 and I wanna know too if I can root this version, or, I can upgrade to this version without loose personal data through fastboot.
Thanks in advance and sorry for grammar mistakes. English is my second language.

mdlgpt said:
Hey folks! I need some help here.
First, my device is an Moto G6 XT1925-3 and I'm using PPS29.55-37-7 stock rom.
I've unlocked my bootloader but I had problems doing this, so I flashed the same rom. After this, I successfully rooted my device but, normal calls through 4g/3g are working without any sound.
WhatsApp calls, or any media app is working properly, only calls trough 4g/3g are muted.
My question is: can I flash only modems partitions? I don't wanna loose any data and personal files.
If I go to settings>about phone my IMEI is listed normally. 4g volte is enabled. Data connection is perfect.
Recently Motorola has launched a new software, PPSS29.55-37-7-2 and I wanna know too if I can root this version, or, I can upgrade to this version without loose personal data through fastboot.
Thanks in advance and sorry for grammar mistakes. English is my second language.
Click to expand...
Click to collapse
Sure run
Code:
fastboot getvar all
To verify the codename and software channel
As described in my
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Then find the correct firmware here
https://mirrors.lolinet.com/firmware/moto
Then flash
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
If that doesn't work
Flash the full firmware just skip the wipe user data command
Sent from my mata using XDA Labs

..

sd_shadow said:
Sure run
Code:
fastboot getvar all
To verify the codename and software channel
As described in my
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Then find the correct firmware here
https://mirrors.lolinet.com/firmware/moto
Then flash
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
If that doesn't work
Flash the full firmware just skip the wipe user data command
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
Hey Bro!
Thanks a lot for your help! But was unsuccessful. I flashed modem partitions but i'm facing the same problem.
Before I flash all system, a question: my root will be removed? I ask this because I think magisk do some modifications to /system partition, so is really a pain root this OS, hehe
Just one more, if you allow me:
To update to lastest security update I'll download lastest zip, and flash all partitions, but without erase userdata, right?
Then, if I wanna my device rooted, i have to do all root process again right?
Finally, thanks a lot. I have to attend a lot of calls in my number but i'm facing this problem about 2 months now. This is really freaking me out because i work with that phone.
thanks a lot again!

UPDATE: finally i got working!
was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907

mdlgpt said:
UPDATE: finally i got working!
was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907
Click to expand...
Click to collapse
Yes, I don't use .bat files
Learn the fastboot commands
They are not that hard.
Sent from my mata using XDA Labs

mdlgpt said:
UPDATE: finally i got working!
was a problem with "dsp" partition, in bat file that ive downloaded, the flash command to dsp was wrong. I found the answer here: https://forum.xda-developers.com/moto-g6/help/moto-g6-call-issues-t4000907
Click to expand...
Click to collapse
Thanks for sharing!