******ATTENTION****ATTENTION******
THIS IS IN ITS VERY BETA STAGE.
------This is PLAYFULGOD's ------
-CM11-20140709_Unofficial_D959-
All thanks and credit goes to Playfulgod
Thanks to TEAM CODEFIRE for the ability
To "BUMP" our boot.img's , kernels, and recovery.img's. Without "BUMP" we would still be on 4.2.2 to have cust. Recovery. Or on 4.4.2 and reflashing to stock every few days to keep going. Lmao and thanks to PLAYFULGOD for testing "BUMP" for us.
All I have done is replace the Meta-inf folder and "BUMPED" the boot.img and did a few things in the build.prop to get it to flash without errors, boot, and stay booted.
I've taken it ad far as my knowledge of android can get it. Feel free to chime in if you have a cure for whats not working.
I'm posting a link to the updated CM11 and the LOLLIPOP GAPPS I use to flash with it.
I am not responsible for what you do with this or your device. Nor did I build this CM11 I just modified it as much as I know how to get it to the point its at now.
DISCLAIMER: This is a CUSTOM' ROM! Use at YOUR OWN RISK!!! By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT. Use at your own risk!
At this time, this is only for Devs and/or people who think they can assist in fixing the issues. It is in no way ready to be a daily driver!!!
Also, you need to make sure you know how and are comfortable with flashing, restoring, fixing any mishaps that might occur on your own. At this time is a development thread, not a hold anyones hand on how to install etc, etc, etc. This statement isnt meant to be mean, just no general support will be offered at this time. That will come when the builds are in beta or stable.
Here ya go folks, CyanogenMod 11 for the G Flex (zee)!!! Well, let's be honest, unless you're living under a rock, you probably know what Android 4.4 (kitkat) is. Furthermore, you should know what the CyanogenMod project is. However, if a rock is really your home and you'd like to learn more, please visit their site: CyanogenMod | Android Community Rom based on KitKat.
Version: 20140709
Developer: PlayfulGod
Description: CyanogenMod 11 for LG G Flex
Source: github
Status: WIP/Testing
CyanogenMod 11
What is this?
This is a build of the popular CyanogenMod 11 for the LG G Flex. This is built from source.
People to Thank
* PLAYFULGOD - most importantly for building this from source.
* CyanogenMod - Do I need to state why we owe thanks to these guys?
* koush - for his wonderful recovery.
* the G2 Devs - for all the work on the g2 which this is all based off of.
* savoca - for kernel patches.
* MattWheat - for recent updates
*Team Codefire - for "BUMP"
* [vertigo] - for vendor blob experimenting!!!
****UPDATED CM11 Build 2014115****
******Whats Not Working?******
1. Camera (of course)
2. Absolutely no sound from anything or anywhere. Its so smooth you can't hear it vibrate but it does.
3. Phone - it opens, you can dial but when you hit send it freezes on the dialer screen then closes then about 5 secs later the call screen comes up then call ends. But it never really called. Can't receive calls either.
4. So far that's all I have found not working.
What is working
Everything else seems to be good to go.
It gets DATA --4G LTE, 3G, H+, and H.
You can send and receive SMS and MMS even pics
Email seems to work and any apks that communicate with data. Hangouts dialer does not.
Gallery works.
Screenshot works.
I used the LOLLIPOP ANDROID 5.0 GAPPS Cuz I like material feel. But I suggest 4.4 GAPPS and up.
WiFi works.
Tethering works great too. Streamed Xbox live all day on it.
I did not check Bluetooth let me know.
Changelog
****update****
Confirmed working on:
T-MOBILE - D959
AT&T - D950
How do I install this?
NOTE: Need to be on the latest version of CWM or TWRP Recovery, and have the f340k aboot installed.
1. Download the .zip & copy to phone (make sure wifi is enabled if dl'd from phone).
2. Zip can be installed from either sdcard or with sideload (No need to copy zip to phone if using sideload, see instructions for sideload below).
3. MAKE A BACKUP!!!
4. DO A FACTORY RESET!!! - this will wipe data & cache!
5. Go to install zip from sdcard
6. Choose zip from sdcard
7. Select cm-11-xxxxxxxxxx-UNOFFICIAL-xxxx.zip
8. Confirm
9. Repeat Steps 5 -8 for gapps
10. Reboot
If using sideloadownload zip on PC
boot to recovery
install zip from sdcard
install zip via adb sideload
Connect to PC via USB (make sure to have USB drivers if using Windows)
Open a terminal or cmd window and type:
adb sideload cm-11-xxxxxxxx-UNOFFICIAL-xxxx.zip
Click to expand...
Click to collapse
Repeat for Gapps.
Reboot
XDAevDB Information
CyanogenMod 11, ROM for the LG G Flex
Contributors
PlayfulGod, savoca
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Rom Download: ----
https://docs.google.com/file/d/0B2OabWtEBQcpUUVxUVlFR1I5X28/edit?usp=docslist_api
LOLLIPOP GAPPS: ----
https://docs.google.com/file/d/0B2OabWtEBQcpQ0o5bWxoQ2t5Szg/edit?usp=docslist_api
*****REMEMBER THIS IS NOT READY***** **********FOR DAILY USE**********
SCREENS: ----
I have the theme "slim screenalicious" installed and implemented. So pay no attention to that. Notice the dialog in the last pic. Yeah I can't wait to find that post and answer it !!!!!!!!!
Haha. First reply.
Yes yes. I'm finally after 4-5 years I'm first. Yes.
Reserved
Thanks!
Legit!
Good To See That There Are Some Devs Still Working On This Awesome Device.
I'm Always Down To Help
D950?
Nope its just d959.
mattwheat said:
Nope its just d959.
Click to expand...
Click to collapse
Really? I installed it on my d950 ATT without first reading your message. Works so far.
Edit: wow it installed without a device check? Cool, but not cool. Anyways it looks like a good build overall, just needs audio and then it could be a daily driver. I also suspect that the DSP is preventing calls.
Oh well cool. I didn't know for sure and with out testing I didn't want to say " it should " then get pages upon pages of people asking how to unbrick
Im really happy to see this. ATT is doing a promotion for 15gb and $30 off but you have to keep your phone for another year. Ill be happy to keep this phone now. Thanks dude
cgardner2020 said:
Really? I installed it on my d950 ATT without first reading your message. Works so far.
Edit: wow it installed without a device check? Cool, but not cool. Anyways it looks like a good build overall, just needs audio and then it could be a daily driver. I also suspect that the DSP is preventing calls.
Click to expand...
Click to collapse
Could you provide screenshots of it running on your AT&T D950 please so we can have full confirmation it does boot. And doesn't brick. Thank you.
I'm Trying To Get It Going On My D950 Also But I Can't Get The Zips To DL. Whenever I Hit The Link It Just Takes Me To The Preview Of The Inside Of The Zips.
What Am I Missing Here...?
Desert.pro.riders said:
I'm Trying To Get It Going On My D950 Also But I Can't Get The Zips To DL. Whenever I Hit The Link It Just Takes Me To The Preview Of The Inside Of The Zips.
What Am I Missing Here...?
Click to expand...
Click to collapse
Check out the pic. There is this whole new thing called downloading and download button. I'm not sure what its all about but I believe if you click the circled "download button" it puts that stuff on your phone.
Lmao just giving you hard time man yeah for some reason it fades away and you have to retouch the screen anywhere and it along with that whole top line re-appears... Try that out. And when you get it booted will you provide screenshots for AT&T confirmation that its working.
Thanks.
Check Out This Pic.
.Probably Because I Was Using Chrome Browser That Top Bar Never Showed Up. I'll Try With Dolphin Browser Since That Is What You Use Thanks
I was looking at the G2 forums and its development and I thought it was declining. Then I had a look at the G flex and saw there's barely any. Good thing they have you, Matt!
works!
Sooo.. It Does Work.
It Failed The First Time I Tried. I Disabled Loki Support Then Flashed Again And It Did Work. Flash 5.0 Gapps & It Booted Fine.
Upon Booting I Kept Getting An FC . Something About "ACore" (Screen Shot Didn't Save idk)
Skipped Past Set Up Then Is Rebooted. Booted Up Again & It Did The Whole "Android Is Upgrading" Thing Then Rebooted Again & Seems Like Its Running Good Now.
On The About Phone It Does Show LG-D959 & Not What D950 Which Is What I'm Really Using.
Everything That Works And Doesn't Work Seems The Same On This D950 As The D959.
Any chance a Sprint version could appear?
Sent from my LG-LS995 using Tapatalk
I Used This ROM On My D950 For About 3Hours
Other Stuff That I Noticed That Didn't Work Include.
•Knock On & Knock Code
•Notification LED (front & back)
•Bluetooth Turns On But Doesn't Pair.
•Battery Charges Super Slow & Drains. (Even While Charging & Using)
•USSD Codes Dont Work. It Just Stay Idling.
Along With The Other Stuff You Stated That Is Not Working.
All I Can Remember Right Now. Very Beta ?
mattwheat said:
Could you provide screenshots of it running on your AT&T D950 please so we can have full confirmation it does boot. And doesn't brick. Thank you.
Click to expand...
Click to collapse
I just got home from work, getting ready for SOA and drinking coffee, after the show I'll get out my camera and do a walkthrough of everything and post a link for you.
mattwheat said:
Could you provide screenshots of it running on your AT&T D950 please so we can have full confirmation it does boot. And doesn't brick. Thank you.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1tD9FHqx_bkN0JFZlJxRlBYSHc/view?usp=sharing
@mattwheat how did you bumped the cm11 zip did u delete or chnged anything having trouble bumping my rom zip
sickkside13 said:
@mattwheat how did you bumped the cm11 zip did u delete or chnged anything having trouble bumping my rom zip
Click to expand...
Click to collapse
You don't bump the zip. Before zipping you bump the kernel and boot.img.
Related
THIS IS NOW OFFICIALLY SUPPORTED BY LIQUIDSMOOTH.
I am still doing some of my own builds too.
I am running this daily now. Be sure you update to a newer build and flash Gapps when you update.
Get it here: http://d-h.st/search?search_by=2&search_for=jsnweitzel
Rom Slot 1 only and 4.2 Gapps
Updates:
01/06/13 - Keyboard lights (look for the build that says "keyboard lights" in the notes)
01/19/13 - Black call screen fix by Hashcode, fixed a few other bug
01/28/13 - Tether fix
This is heavily based on the STS-Dev Team (hashcode-dhacker29) and the liquid team sources. So a big thanks to them and to cyanogenmod, also to users fattire and redflea. Without their work-sources I will never have even tried this. This still has the same bugs as the other 4.2 roms.
You can find what modified code I used on github here: https://github.com/jsnweitzel.
As usually you are responsible for whatever you do to your device.
Thank you sir! Been hoping someone would port this. Can't wait for the bugs to be ironed out!
Sent from my DROID4 - Eclipse
Nice thank you
Thanks man, I'm happy to see a new ROM in the making. Hope the bugs get squashed out soon.
Sent from my Nexus 7
I've been waiting for this too!
Doesnt seem to boot if flashed with SS2.11, but not sure if thats the problem. I'm not a fan of SS3 so i wont be trying to flash it with that.. anyone got any findings about the rom?
Installed safestrap 3.11 Stock slot gives reboot loops, but romslot 1 works. Still lost over 1 gb cause of it.. ah well!
I'm from europe and the data doesnt work ofcourse. Trying to adjust apnfis-conf.xml and build.prop using myfishbears GSM patch as a base. Still cant get GSM to work.. anyone from europe got any experience with JB4.1 or 2 and fixed it? It does find my carrier (NL KPN) and ticked on national roaming.
I found a post in the CM10.1 thread with correct settings, but if I try to adjust the settings the phone doesn't boot up.. the files are attached in the zip (the zip doesnt flash though I used adb push to get them on my phone)
I should just make a new post, but think this is more useful hehe I got the patch up and working! So people with a GSM rom can use the patch I attached for liquid rom
Dont forget to put national roaming on!
Thanks to olegfusion and myfishbear for the patch and love the rom (apart from the bugs ofc) so far jsn!
Keyboard lights now working!
jsnweitzel said:
Keyboard lights now working!
Click to expand...
Click to collapse
Sweet! Don't realize how important this is until your in the dark trying to type something.
Like right now : )
Gonna give this a shot tomorrow.
Sent from my Droid 4 - KILLRom
kwyrt said:
Sweet! Don't realize how important this is until your in the dark trying to type something.
Like right now : )
Gonna give this a shot tomorrow.
Sent from my Droid 4 - KILLRom
Click to expand...
Click to collapse
My keyboard lights aren't working :-/ is there a setting that I'm missing? I installed fresh onto the slot-1
edit: Oh damn I didn't see the keyboard lights ROM this morning when I flashed. will try out!
Sweet! What bugs have been noted so far?
Everyone else able to send MMS's? I don't recall sending a picture since flashing but I have also done some contact editing since and want to isolate the problem.
I figured I would post this here as well since it should work for all 4.2.1 ROMs.
Per tweet from dhacker:
“Moto KILLROM users someone tweeted me earlier and stated that if you turn off the lockscreen you can turn the ringtone back on”
I'm at work so I haven't had a chance to test this out. If anyone wants to try it let us now if it works. I'll be testing this out this evening.
local444 said:
Sweet! What bugs have been noted so far?
Click to expand...
Click to collapse
I think the most important one (thats why im on ICS again) is that you cant receive calls (blackscreen when ringing) unless you go into vibrate.
Bluetooth is a bit glitchy aswell.
Camera flash only works on focus.
Cant recall if there was anything else..
Respect to the devs on your hard work
Does anyone know if third party camera apps work on this rom? Snapchat, instagram, the like.
Anybody else having issues with MMS? I am unable to send through normal messaging and GO SMS pro.
For those keeping up with this ROM there is a new 01/21 build up.
One thing I noticed with both the 01/18 and 01/21 build is that when I tried to flash over my existing Liquid ROM they both wiped out my gapps. In both cases I ended up wiping system, the reinstalling the current build along with gapps and that seemed to work fine.
Keep up the great work jsnweitzel. Really this ROM.
I suggest you flash the gapps every time you update. I had a issue with the play store crashing too. If you uninstall the updates then it should be fine and will update back to the latest version.
Edit -- the play store issue was with the 11-30 gapps, with the 12-12 ones it works fine. I add the gapps to my dev host folder and a build with the mms fix is uploading now.
Sent from my XT894 using Tapatalk 2
What is different about the 1/25 build?
"dumpstate" is requesting root access. Anyone know what that is? I'm ignoring it for now. LOL
Sent from my Droid 4 - LiquidSmooth
kwyrt said:
"dumpstate" is requesting root access. Anyone know what that is? I'm ignoring it for now. LOL
Sent from my Droid 4 - LiquidSmooth
Click to expand...
Click to collapse
It's an issue with the update to SuperSu. Checkout the thread here: http://forum.xda-developers.com/showthread.php?t=1538053&page=202
Can you get a log? Chainfire is looking for one to debug.
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen
Steel Droid - Now for the G2!
This is my first attempt at a ROM for the G2. I can build one from source, but wanted to try my hand at modding a stock OTA.
This ROM is based on the Verizon 24a OTA. That being said, you must be using a 24a bootstack for this to work.
This is a blended ROM. Kind of like what some of you might remember from my Droid 3 days. Mods, additions, bloat removal, and eventual theming.
I DO need some help with deodexing and odexing. If you want to lend some knowledge/files, PM me!
Changelog:
v1.0.9 (BETA)
* Removed SOME bloat from /system/app/
* Added xdabbeb's 3.1.0 Camera mod
* Added in my custom ad-blocking hosts file
* Optimized and compressed all audio files (ogg)
* USB autorun ISO removed
Downloads:
Code:
[URL="http://www.androidfilehost.com/?fid=23487008491962403"]v1.0.9[/URL]
md5: bbe5d29517a42e965fcad362c6bbcd98
Installation:
1: Flash from recovery (TWRP 2.7.0.0 is what I use)
2: Reboot
3: Profit!
Credits:
Google
LG
Xdabbeb's
MicroMod77
others....
Big fan of your work with my previous phone Droid 3. Glad to see u here!
Sent from my VS980 4G using XDA Free mobile app
chevycam94 said:
This is my first attempt at a ROM for the G2. I can build one from source, but wanted to try my hand at modding a stock OTA.
Theres a chance this won't even boot. I'm at work, only have my phone, and can't test until late evening. Please report issues!
Change log:
v1.0.3
* Removed bloat
* Updated apps to current versions
* Included Xdabbeb's v3.1.0 camera mod
* Optimized all OGG audio files
* Xposed framework preinstalled plus:
- Advanced Reboot Menu
- GravityBox
- Network Speed Indicator
* Removed usbautorun.iso
* Mobile Hotspot provisioning mod
There's more I can't remember at the moment.....
Downloads:
v1.0.3
I will update the OP as I get breaks.
Credits:
Google
LG
Xdabbeb's
MicroMod77
others....
Click to expand...
Click to collapse
Guess I will ask it, as I did not see it in the OP...24A??
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
TPS_Reports said:
Guess I will ask it, as I did not see it in the OP...24A??
Click to expand...
Click to collapse
Nevermind...download file name says it all.
Sent from my LG-VS980 using Tapatalk
Anyone having a issue downloading?
Sent from my VS980 4G using Tapatalk
Got to 60% then FAILED !!!
worked for me
Mine worked but was slow. About to flash
Sent from my VS980 4G using Tapatalk
let me know if it works mine is still downloading
Chevy thanks for putting out a ROM for the G2. I'm glad to see you here. I haven't run something from you since the original droid!
wouldnt download
kenbrownstone said:
Mine worked but was slow. About to flash
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I too was able to download the file but was incredibly slow...will flash tonight when I get home from work. Will report any issues.
Download just worked fine for me...
MrC
JDROIDS said:
Chevy thanks for putting out a ROM for the G2. I'm glad to see you here. I haven't run something from you since the original droid!
Click to expand...
Click to collapse
You were around in the Stone Age? lol Yeah, Im still going at it! Actually I think Im the ONLY active developer for the Droid 1 still. lol IM NUMBER ONE (of one)! lol
To all those having trouble downloading:
This is the only place I have right now that will let me upload a file over 500MB. I will eventually be getting my own website/hosting, but thats once I get my finances in place with enough extra to afford it. Im close, but not quite where I feel comfortable with it yet.
AFH just upgraded their severs, so things will be mirroring for a while until the system is back up to date. Sorry for it being slow, but its all I have right now
If this boots, there's a high chance I will begin to include Dorimanx's KK kernels in my releases. His kernel, combined with his STweaks app, is basically unbeatable. Wish it played nice with xdabbeb's ROM, but oh well. Maybe in time...
chevycam94 said:
If this boots, there's a high chance I will begin to include Dorimanx's KK kernels in my releases. His kernel, combined with his STweaks app, is basically unbeatable. Wish it played nice with xdabbeb's ROM, but oh well. Maybe in time...
Click to expand...
Click to collapse
No one is willing to send dorimanx the boot image. Everyone keeps asking for it to be fixed in his thread, and all he asked for was the kernel xdabbeb used, so he can loom at what he changed, and make the changes.
Send him the kernel
Sent from my Vs980 running Fr4nk1yn's Rebooted 24a
Unable to flash using TWRP 2.7.0.0. It said in red "Failed". MD5 matches so I don't think it's a bad download. Maybe bad upload? Maybe needs another version of TWRP or CWM or Philz to flash?
HueyT said:
Unable to flash using TWRP 2.7.0.0. It said in red "Failed". MD5 matches so I don't think it's a bad download. Maybe bad upload? Maybe needs another version of TWRP or CWM or Philz to flash?
Click to expand...
Click to collapse
Go to mounts in Twrp and uncheck "system" should flash after that.
Mindrocket said:
Go to mounts in Twrp and uncheck "system" should flash after that.
Click to expand...
Click to collapse
Nope, didn't work. Still "Failed" in red even with "System" unmounted in TWRP 2.7.0.0.
I just did a quick test. LGSetupWizard has stopped. Cant get a logcat, so I will have to dig deeper, unless any of you have some quick suggestions...
yes failed for me as well right away lol
CyanogenMod 12.1 is a free, community built distribution of Android 5.1 (LolliPop) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM12.1 for the Samsung Galaxy Tab 2 I705 VZW LTE version.
**IMPORTANT** I705VRBLL2 FW required,if you have taken the latest OTA, and were not already rooted/unlocked you will not be able to use this ROM.
There is not root/unlock solution for the latest OTA. See more info in the last few pages of the linked root /unlock threads below.
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions (These are all required)
ROOT and BOOTLOADER unlock required following the linked guides.
Flash THIS custom TWRP recovery with SELinux capabilities.
Download latest ALPHA from http://downloads.codefi.re/jrior001/cm/espressovzw.
Locate 5.1 Gapps via a quick Google search.
Wipe factory/data reset in recovery before installing CM12.1 (unless you are already on a CM12.1 build).
Reboot into recovery and install ROM and gapps.
Known Issues:
LTE radio - Acts up at times requiring a reboot. Causes wakelocks
GPS sometimes it works, sometimes it doesn't. Reboot usually fixes it.
CAMERA - 720p recording fails, all other resolutions work well
USB wakelocks after removing USB cable, "USB Connected" pop-up doesn't go away.
OTG/keyboard dock doesn't work at all
Overall device is smooth and stable minus the above listed issues. I will continue to work on these but wanted to get some feedback on this so far as well. I'm open to assistance if anybody else has one of these and some talent and wants to help.
Huge thanks:
@invisiblek and the rest of the Samsung MSM8960 device maintainers, without there work to follow this would have never happened..
These build utilize the existing samsung 8960 device trees and the 3.4 d2 caf kernel hosted at CM github as well as the following:
https://github.com/jrior001/android_device_samsung_espressovzw
XDA:DevDB Information
CM12.1 i705 TAB2 VZWLTE, ROM for the Samsung Galaxy Tab 2
Contributors
jrior001, jrior001
Source Code: https://github.com/jrior001/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: i705VRBLL2
Based On: AOSP
Version Information
Status: Stable
Created 2015-02-08
Last Updated 2015-09-05
Great...!!!...I see a bit lonely here....whatever..great work sir.
–NigthFury– said:
Great...!!!...I see a bit lonely here....whatever..great work sir.
Click to expand...
Click to collapse
It is lonely here but whatever, i'm still working on it in my spare time. Fixed camera in new build i just uploaded. Also BT is working, sort of....sometimes. Not sure whats going on with BT but i'll keep at it.
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
rippedwarrior69 said:
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
Click to expand...
Click to collapse
I'm not as experienced as some others so this took 3 attempts I think...in between 3-4 month breaks to get the 3.4 kernel booting but I finally got it.
I've got GPS fixed and I'm close on USB. Its proper in windows I think but Linux connectivity is still giving me issues. I'll try to get a new build up in a few days with all that.
I my self am on linux. I use elementray os.
2/28 build is up now, GPS and USB should be proper. OTG/dock still not working but not a major concern for now.
The new update says 403 forbidden when trying to download?
rippedwarrior69 said:
The new update says 403 forbidden when trying to download?
Click to expand...
Click to collapse
Fixed, any issues or things not proper other than what ive mentioned please let me know
Is there a flashible zip for twrp 2.8?
rippedwarrior69 said:
Is there a flashible zip for twrp 2.8?
Click to expand...
Click to collapse
No, I could likely make one though.
Use the did method outlined in the old recovery thread or cheat like I do and download "flashify" from market to flash recovery
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
rippedwarrior69 said:
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
Click to expand...
Click to collapse
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
jrior001 said:
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
Click to expand...
Click to collapse
Oh OK that's cool. Thank you again for the hard work.
rippedwarrior69 said:
Oh OK that's cool. Thank you again for the hard work.
Click to expand...
Click to collapse
Just put up a fresh build, IR blaster seems to be working now.
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
jrior001 said:
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
Click to expand...
Click to collapse
I don't either. Or I would.
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Nicklag said:
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Click to expand...
Click to collapse
If you wouldn't mind I'd like to see the logs when it craps out. I still have some hacks in place for debugging. When it acts up, reboot to recovery and grab the following:
/data/data/logcat.txt
/data/data/kmsg.text
/data/data/radio.txt
Oh and there is a newer recovery build and an updated build at the download link.
I'm dropping the "ALPHA" label at this point. Everything that should be working seems to be in order at this point and the builds are more than reasonably stable. I just uploaded a fresh build w/f2fs support on /data and /cache if anybody is interested in using that. Changing /data to f2fs will require a FULL factory reset and SDCARD wipe as sdcard is emulated on /data/media so be prepared to lose EVERYTHING. TWRP 2.8.5 is required if you wish to reformat anything as f2fs. Both are available at my codefire download link in the OP.
A few minor annoyances remain:
Charging is painfully slow.
USB OTG doesn't work at all.
Plugging USB to PC tends to create some nasty wakelocks.
LTE data is glitchy.
Keyboard dock support hasn't been brought in.
TMobile G4-H811
Edit: The v2 will be replacing the original version as a completely unmodified Stock version. Sorry about the confusion. Pay no attention to the screenshot. This one is completely stock with the stock icons and status bar and all the LG stuff.
Okay So I am not going to make a fancy op. This will mostly be for developers and people who want a deodexed base. This is a deodexed system of app, priv-app, framework and libs. It does boot. SuperSU is included in the system apps, but as this is just raw files, it will not root your system. This is designed to be flashed over a current 10n installation and it WILL NOT work for other software versions. If you want to maintain a full rom, fine, I dont care. If you want to make it easy you are more than welcome to use this. This is NOT debloated, so do it on your own. I am just trying to make it easy for everyone. Seems everyone has hit a brick wall with this phone, and my rom is going to take a while before I release it, So I thought I would spark some creativity and give you guys a jump start :good:
I will not be answering many questions about this. Use it at your own risk. Flash in TWRP recovery. Flashfire is NOT RECOMMENDED. If you look at the updater script you will see why. TWRP ONLY
First Boot will take a while. I tested this at least 10 times on my own phone and it seems to want to skip the boot animation so dont freak out. Give it a good 10 minuted before attempting anything drastic like a battery pull.
I only have 2 requests to use this. One of them is a must. The second one is a preference.
If you use this: Give proper credits in the OP and DO NOT ASK OR PM ME. Just do it!:good::highfive:
The Second one: Please dont use this to make zip roms of random copy and paste xposed roms. You can do that with an Odexed image. Seriously, I dont want to see this end up like a Samsung forum
Download Link Located in the Downloads Section
Or click Here if you're lazy: H811_G4_10n_Deodexed_v2
XDA:DevDB Information
H811 Deodexed Base Installer, ROM for the T-Mobile LG G4
Contributors
TheDriller
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TMobile 10n Bootstack and Rom
Version Information
Status: Stable
Current Stable Version: v2
Stable Release Date: 2015-10-10
Created 2015-10-06
Last Updated 2015-10-11
Reserved
Reserved
TheDriller said:
TMobile G4-H811
Okay So I am not going to make a fancy op. This will mostly be for developers and people who want a deodexed base. This is a deodexed system of app, priv-app, framework and libs. It does boot. SuperSU is included in the system apps, but as this is just raw files, it will not root your system. This is designed to be flashed over a current 10n installation and it WILL NOT work for other software versions. If you want to maintain a full rom, fine, I dont care. If you want to make it easy you are more than welcome to use this. This is NOT debloated, so do it on your own. I am just trying to make it easy for everyone. Seems everyone has hit a brick wall with this phone, and my rom is going to take a while before I release it, So I thought I would spark some creativity and give you guys a jump start :good:
I will not be answering many questions about this. Use it at your own risk. Flash in TWRP recovery. Flashfire is NOT RECOMMENDED. If you look at the updater script you will see why. TWRP ONLY
First Boot will take a while. I tested this at least 10 times on my own phone and it seems to want to skip the boot animation so dont freak out. Give it a good 10 minuted before attempting anything drastic like a battery pull.
I only have 2 requests to use this. One of them is a must. The second one is a preference.
If you use this: Give proper credits in the OP and DO NOT ASK OR PM ME. Just do it!:good::highfive:
The Second one: Please dont use this to make zip roms of random copy and paste xposed roms. You can do that with an Odexed image. Seriously, I dont want to see this end up like a Samsung forum
XDA:DevDB Information
H811 Deodexed Base Installer, ROM for the T-Mobile LG G4
Contributors
TheDriller
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TMobile 10n Bootstack and Rom
Version Information
Status: Stable
Stable Release Date: 2015-10-06
Created 2015-10-06
Last Updated 2015-10-06
Click to expand...
Click to collapse
OMG nice work bro. You rock. Um will this work with Xposed?
Cowboy from Hell on a twisted trail.
Koffed From my Big Ass Outlaw Phone.
Bubba said:
OMG nice work bro. You rock. Um will this work with Xposed?
Cowboy from Hell on a twisted trail.
Koffed From my Big Ass Outlaw Phone.
Click to expand...
Click to collapse
You're dead to me.
TheDriller said:
You're dead to me.
Click to expand...
Click to collapse
Nope
Cowboy from Hell on a twisted trail.
Koffed From my Big Ass Outlaw Phone.
@TheDriller hey i see you included supersu app but you say its not rooted. My only question is can it be rooted though the supersu app or must we use other means
TheDriller said:
TMobile G4-H811
Okay So I am not going to make a fancy op. This will mostly be for developers and people who want a deodexed base. This is a deodexed system of app, priv-app, framework and libs. It does boot. SuperSU is included in the system apps, but as this is just raw files, it will not root your system. This is designed to be flashed over a current 10n installation and it WILL NOT work for other software versions. If you want to maintain a full rom, fine, I dont care. If you want to make it easy you are more than welcome to use this. This is NOT debloated, so do it on your own. I am just trying to make it easy for everyone. Seems everyone has hit a brick wall with this phone, and my rom is going to take a while before I release it, So I thought I would spark some creativity and give you guys a jump start :good:
I will not be answering many questions about this. Use it at your own risk. Flash in TWRP recovery. Flashfire is NOT RECOMMENDED. If you look at the updater script you will see why. TWRP ONLY
First Boot will take a while. I tested this at least 10 times on my own phone and it seems to want to skip the boot animation so dont freak out. Give it a good 10 minuted before attempting anything drastic like a battery pull.
I only have 2 requests to use this. One of them is a must. The second one is a preference.
If you use this: Give proper credits in the OP and DO NOT ASK OR PM ME. Just do it!:good::highfive:
The Second one: Please dont use this to make zip roms of random copy and paste xposed roms. You can do that with an Odexed image. Seriously, I dont want to see this end up like a Samsung forum
Download Link Located in the Downloads Section
Or click Here if you're lazy: H811_G4_10n_Deodexed
XDA:DevDB Information
H811 Deodexed Base Installer, ROM for the T-Mobile LG G4
Contributors
TheDriller
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TMobile 10n Bootstack and Rom
Version Information
Status: Stable
Stable Release Date: 2015-10-06
Created 2015-10-06
Last Updated 2015-10-06
Click to expand...
Click to collapse
Bubba said:
OMG nice work bro. You rock. Um will this work with Xposed?
Cowboy from Hell on a twisted trail.
Koffed From my Big Ass Outlaw Phone.
Click to expand...
Click to collapse
TheDriller said:
You're dead to me.
Click to expand...
Click to collapse
Bubba said:
Nope
Cowboy from Hell on a twisted trail.
Koffed From my Big Ass Outlaw Phone.
Click to expand...
Click to collapse
bbell101584 said:
@TheDriller hey i see you included supersu app but you say its not rooted. My only question is can it be rooted though the supersu app or must we use other means
Click to expand...
Click to collapse
So will this work on my note3 & does it have xposed?
bbell101584 said:
@TheDriller hey i see you included supersu app but you say its not rooted. My only question is can it be rooted though the supersu app or must we use other means
Click to expand...
Click to collapse
If your current 10n installation is already rooted. This will not affect that. Thats why i included the app because most people are already rooted. Since this is basically a deodexed framework and app pack no data wipe is needed and none of your settings will be changed. Simply flash in TWRP.
If you are not already rooted simply flash a rooted image prior to this or flash the su zip from chainfire.
sparx said:
So will this work on my note3 & does it have xposed?
Click to expand...
Click to collapse
Koff
Thank you! This is awesome!
jobella said:
Thank you! This is awesome!
Click to expand...
Click to collapse
You're welcome bud.
I was hoping that releasing this and not just sitting on it would actually spark a little bit of development. I have a long way to go before mine is ready for release, however this might give some devs a break as I know that a bunch have run into issues deodexing and even making a flashable system unless its a direct copy of their image.
Nice AOSP icons and mods. I like it! Can't wait for your rom. Thanks again.
jobella said:
Nice AOSP icons and mods. I like it! Can't wait for your rom. Thanks again.
Click to expand...
Click to collapse
Oh that?
Its really nothing...
This is what I am working on for the G4
http://forum.xda-developers.com/showthread.php?t=2778933
AllianceROM Lollipop v12 Final 10.07.2015
Seems to have fixed WiFi calling issues but the smart notice weather widget appears to be broken. Just time and stagnant welcome to smart notice. I tried clearing chance, reinstalling weather and weather theme, no luck. Any ideas? Besides new weather widget lol unless I absolutely have to.
---------- Post added at 10:03 PM ---------- Previous post was at 09:35 PM ----------
jlb1125 said:
Seems to have fixed WiFi calling issues but the smart notice weather widget appears to be broken. Just time and stagnant welcome to smart notice. I tried clearing chance, reinstalling weather and weather theme, no luck. Any ideas? Besides new weather widget lol unless I absolutely have to.
Click to expand...
Click to collapse
I got it working by installing the lg weather service apk from another thread. I simply opened the zip and installed the app using the package installer.
http://forum.xda-developers.com/verizon-lg-g3/themes-apps/lg-g4-weather-t3123211
Flashing this causes a bootloop because you're force-deleting dalvik-cache in your updater-script. The phone will recompile the APKs on its own on first boot, so that line is unnecessary.
Also, can we have a completely unmodified version? I appreciate the SystemUI modifications, but I like my clock on the right, my navbar bigger, and the other LG stuff stock. Thank you!
siraltus said:
Flashing this causes a bootloop because you're force-deleting dalvik-cache in your updater-script. The phone will recompile the APKs on its own on first boot, so that line is unnecessary.
Also, can we have a completely unmodified version? I appreciate the SystemUI modifications, but I like my clock on the right, my navbar bigger, and the other LG stuff stock. Thank you!
Click to expand...
Click to collapse
It is unmodified, unless somehow I got the wrong UI in the zip which I dont think that I did. And it doesn't cause a bootloop. I force clear dalvik because as I seem to be the only one who has been able to get a deodexed system going on ANY of the G4's, I found that it was necessary to delete recursively because I found there was some left overs if you let the system do it for you. You are free to experiment with it though.
I installed this and booted fine. I had WiFi calling of course. I then installed Xposed 74 and I booted fine and still had WiFi calling. I made a call to test WiFi calling and it works.
I loaded a few modules in Xposed and bootlooped once I enabled them. Turned out that not Xinstaller but Network Speed Indicator was the culprit. I removed Network Speed Indicator module and I'm fine. I tested this with Xposed 74 and then 75.
This ROM gives me WiFi calling with Xposed version 74 and version 75. I go on and off my WiFi network and WiFi calling gets enabled while I'm on my network as it should. I've made several calls with Xposed 74 and 75 and WiFi calling works fine.
I am now using Xposed 75 and I have a few modules enabled. This rom works great!
I have WiFi calling, modules enabled in Xposed 75, a cool AOSP look and I'm happy. I am using this as my daily driver now.
TheDriller said:
It is unmodified, unless somehow I got the wrong UI in the zip which I dont think that I did. And it doesn't cause a bootloop. I force clear dalvik because as I seem to be the only one who has been able to get a deodexed system going on ANY of the G4's, I found that it was necessary to delete recursively because I found there was some left overs if you let the system do it for you. You are free to experiment with it though.
Click to expand...
Click to collapse
Hmm, maybe there's something wrong with my phone, then. Clearing dalvik even from TWRP made it bootloop. I'll investigate, thanks for the info.
As for the SystemUI modifications, after I flashed the ZIP, suddenly my clock was in the center of the status bar, my Quick Settings toggles started looking very AOSP, same for the On/Off switch toggles in the Settings app, overall the phone started looking AOSPified in random places... could you check if the SystemUI in the ZIP is the correct one? I appreciate it and thank you for posting this!
siraltus said:
Hmm, maybe there's something wrong with my phone, then. Clearing dalvik even from TWRP made it bootloop. I'll investigate, thanks for the info.
As for the SystemUI modifications, after I flashed the ZIP, suddenly my clock was in the center of the status bar, my Quick Settings toggles started looking very AOSP, same for the On/Off switch toggles in the Settings app, overall the phone started looking AOSPified in random places... could you check if the SystemUI in the ZIP is the correct one? I appreciate it and thank you for posting this!
Click to expand...
Click to collapse
When you say that you are bootlooping... Explain further please. Were you able to get a log? Was it on the boot animation? The white TMobile screen NOT the LG splash screen.
If it is sitting on the LG screen you should be fine. As I said in the op this seems to want to skip the TMobile boot animation for some reason. I am still trying to figure that one out. It will appear to have stalled on the LG splash screen, but its okay.
Also like I said in the OP... There is NO need to wipe ANYTHING with this. All you need to do is flash it over the top of a current working 10n rom. That is all. It shouldnt bootloop. You dont need to do anything else. Just flash.
LOL
"It started looking very AOSPified in random places."
Yeah... I will look at it. I may have inadvertently got the wrong UI in there. Sorry buddy. My system is a mess right now.