Database Develop

[Q] No Audio Mahdi 6/28

Hi, sorry if this is in the wrong place, XDA won't let me post to the mahdi thread because I'm new.
I clean flashed the 6/28 Mahdi Rom for my Vs980 and audio didn't work whatsoever. Everything else was fine. Here are a couple of examples of what I mean:
Poweramp play button will be clickable but will return an error and revert to the play button
Youtube will constantly prepare to play (load, attemp to play then continue to load again)
Placing phone calls results in a black screen, then call ended screen 20 seconds later
Receiving phone calls don't show up, rings once (on the phone placing the call not my vs980) then goes to voicemail
Volume up and down doesn't give tones.
Apollo player gives "DSP manager crashed" errors
I tried freezing DSP manager, but that didn't work.
I should also mention I didn't restore using titanium, I tried reflashing 3 or 4 times, and I used the PA 4.4.4 gapps.
I can't find anyone else with this issue, hopefully someone knows what's up.
Thanks for helping if you respond!

Have you tried a different rom? One specifically for our service. I know Mahdi is compatible, but just to see.
Sent from my VS980 4G using XDA Premium 4 mobile app

[removed reply, see below]

njstein said:
Have you tried a different rom? One specifically for our service. I know Mahdi is compatible, but just to see.
Click to expand...
Click to collapse
Yes I have, I'm currently running a 4.4.2 build of Mahdi that works fine (2.4-g2-20140211). It's just the 6/25 and 6/28 that have the audio issues for me.

Nextcue said:
Yes I have, I'm currently running a 4.4.2 build of Mahdi that works fine (2.4-g2-20140211). It's just the 6/25 and 6/28 that have the audio issues for me.
Click to expand...
Click to collapse
Huh, that's weird. You probably can't post in that for trouble shooting, so have you tried a different gapps? Maybe PA is doing something? Banks gapps is an excellent package (just keep the convo going so you can hit 10 posts).
Here's a link to Banks:
http://forum.xda-developers.com/showthread.php?t=2012857
Sent from my VS980 4G using XDA Premium 4 mobile app

njstein said:
Huh, that's weird. You probably can't post in that for trouble shooting, so have you tried a different gapps? Maybe PA is doing something? Banks gapps is an excellent package (just keep the convo going so you can hit 10 posts).
Click to expand...
Click to collapse
Hmm, I'll check that out when I get a chance. Thanks so much for replying

Nextcue said:
Hmm, I'll check that out when I get a chance. Thanks so much for replying
Click to expand...
Click to collapse
I guess you are on the stock unmodded Kit Kat modem right?

JRJ442 said:
I guess you are on the stock unmodded Kit Kat modem right?
Click to expand...
Click to collapse
Maybe, how would I find out? When I first rooted I flashed Mahdi over 24a I think.

Nextcue said:
Maybe, how would I find out? When I first rooted I flashed Mahdi over 24a I think.
Click to expand...
Click to collapse
How did you get to 24A? If it was from an OTA its the stock modem. Post a picture of your baseband if you can

JRJ442 said:
How did you get to 24A? If it was from an OTA its the stock modem.
Click to expand...
Click to collapse
It was the OTA, so yes it is the stock modem.

Nextcue said:
It was the OTA, so yes it is the stock modem.
Click to expand...
Click to collapse
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio. I think you should go to the Malladus thread, download his baseband updater, and the ROM. And flash that. It should straighten out whatever happened. Some sound drivers are tied in with the modem/baseband for some reason on KK. That's what makes me think something with the baseband is messed up. I think I have the Malladus stuff in my Dropbox if you want links. After you get a good GPS lock in maps with Malladus. Then flash the newest build of Mahdi, not the 2.4 build you're running.

JRJ442 said:
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio. I think you should go to the Malladus thread, download his baseband updater, and the ROM. And flash that. It should straighten out whatever happened. Some sound drivers are tied in with the modem/baseband for some reason on KK. That's what makes me think something with the baseband is messed up. I think I have the Malladus stuff in my Dropbox if you want links. After you get a good GPS lock in maps with Malladus. Then flash the newest build of Mahdi, not the 2.4 build you're running.
Click to expand...
Click to collapse
Thank you so much, links would be very appreciated.

JRJ442 said:
The current build you're on where everything works shouldn't even boot if you're on 24A. As old as that build is(2.4), its still using the JB kernel, requiring the 12b radio.
Click to expand...
Click to collapse
Also I just checked, definitely still on the 12b radio.

Nextcue said:
Thank you so much, links would be very appreciated.
Click to expand...
Click to collapse
First question, are you using TWRP? The wipe instructions below are for TWRP
Here's the ROM https://copy.com/PDixihCzNxqLSBp
Here's the baseband updater https://copy.com/mVY1Qi2cVg3EgXS and the md5 is 941f657383ab5a6ddc8c6f4c0ee4183c make sure t matches before you flash.
Reboot to recovery and flash the baseband updater. Then hit the back button. Select wipe -> advanced wipe. Select dalvik, cache, system, data. Be absolutely sure you don't select internal. Flash Malladus and whatever gapps you prefer.

JRJ442 said:
First question, are you using TWRP? The wipe instructions below are for TWRP
Reboot to recovery and flash the baseband updater. Then hit the back button. Select wipe -> advanced wipe. Select dalvik, cache, system, data. Be absolutely sure you don't select internal. Flash Malladus and whatever gapps you prefer.
Click to expand...
Click to collapse
I am using TWRP. So after I follow your steps, go into the malladus rom and check the gps, then do I flash the latest Mahdi?

Nextcue said:
I am using TWRP. So after I follow your steps, go into the malladus rom and check the gps, then do I flash the latest Mahdi?
Click to expand...
Click to collapse
Yes, actually download maps and ensure it get a GPS lock on you. Then reboot to recovery, go to advanced wipe and select dalvik, cache, system, and data. Then flash the newest mahdi and the newest patch. The ROM is 6-28 and the patch is V6 I believe. Then gapps. You should be good to go then.

JRJ442 said:
Yes, actually download maps and ensure it get a GPS lock on you. Then reboot to recovery, go to advanced wipe and select dalvik, cache, system, and data. Then flash the newest mahdi and the newest patch. The ROM is 6-28 and the patch is V6 I believe. Then gapps. You should be good to go then.
Click to expand...
Click to collapse
Thank you so much, really, I appreciate all of your help!

Nextcue said:
Thank you so much, really, I appreciate all of your help!
Click to expand...
Click to collapse
No problem. Report back too please. And definitely make sure the md5 matches on your download for that baseband updater. That's super important

JRJ442 said:
No problem. Report back too please. And definitely make sure the md5 matches on your download for that baseband updater. That's super important
Click to expand...
Click to collapse
Will absolutely report back. I will be testing it later tonight.Just in case though: What do I do in the event I do not get a gps lock on maps?

Nextcue said:
Will absolutely report back. I will be testing it later tonight.Just in case though: What do I do in the event I do not get a gps lock on maps?
Click to expand...
Click to collapse
You'll get one. No need to worry about not getting one. You just have to do it because sometimes coming from 12B JB source, the sensors won't calibrate correctly on a ROM with true KK source. But I'm not really sure what you could do if you don't to be honest. You should get a lock fairly quick though. Just make sure location is on high accuracy and it will lock

[Q&A] [Rom][DEV][4.4.4] CyanogenMod 11 for LG L90 - LG-D415

Q&A for [Rom][DEV][4.4.4] CyanogenMod 11 for LG L90 - LG-D415
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

failure to wake using power buttons; 10-7-14 CM11 d415 build
shinobisoft said:
Newest build: 2014-10-07
Previous builds:2014-10-04
2014-09-10
2014-09-07
2014-09-04​
GApps: http://forum.xda-developers.com/showthread.php?t=2397942
Use the link above for PA-GApps for the moment. I will put together a GApps package ventually. LOL :silly:
Recoveries: ( flash with fastboot or and app like Flashify )
CWM 6.0.5.0 ( Swipe up/down to scroll. Swipe left to go back, Swipe right to select )
Philz-Touch 6.57.5 ( Thanks to @shoxxy )​
Click to expand...
Click to collapse
Hi -- using 10-7-14 ROM. Phone wouldn't wake from sleep; had to hard reboot it. Have pulled dmesg: uweb.txstate.edu/~mc54/dmesg.txt
Thanks.

Hey! just curious, I have D415 and i'm rooted with towel root. I heard this phones boot loader is already unlocked, so do I just flash cwm through flashify, boot into recovery then flash cm11 like normal?

JTC3 said:
Hey! just curious, I have D415 and i'm rooted with towel root. I heard this phones boot loader is already unlocked, so do I just flash cwm through flashify, boot into recovery then flash cm11 like normal?
Click to expand...
Click to collapse
Yep. I went thru the unlock anyways, but I don't think it's necessary.
---------- Post added at 05:51 PM ---------- Previous post was at 05:40 PM ----------
michaelc5047 said:
Hi -- using 10-7-14 ROM. Phone wouldn't wake from sleep; had to hard reboot it. Have pulled dmesg: uweb.txstate.edu/~mc54/dmesg.txt
Thanks.
Click to expand...
Click to collapse
Did you perform all wipes ( cache, Dalvik Cache ) and also format /system? I did notice a few entries in your dmesg that I've never seen before. And I've reviewed quite a few

now what
SO I've somehow got your Rom on my phone couldn't tell you how. But I can't find my stuff that was previously installed on my phone float keeps saying it's there but where I have no clue. Can you point me in the right direction also how do I unzip gapps thank you for your time and hard work

uglyrichie said:
SO I've somehow got your Rom on my phone couldn't tell you how. But I can't find my stuff that was previously installed on my phone float keeps saying it's there but where I have no clue. Can you point me in the right direction also how do I unzip gapps thank you for your time and hard work
Click to expand...
Click to collapse
Gapps gets flashed via recovery just like the ROM. If coming from stock or any other ROM, assuming you followed my install instructions in the OP, all user data was removed. You will need to reinstall what apps you need or want. The external sdcard is now accessible at /storage/sdcard1 instead of /storage/external_SD. Full system wipe is only required when changing major versions or when coming from another ROM. Updates can be flashed without performing any wipes.
Sent from my LG-D415 using Tapatalk

thanks
Thank you so much

PLEASE HELP ATT note 3 e:unable to mount system

Hi
I have ATT galaxy note 3 first time I installed a rom I did it over the stock rom slot, no biggie, to make a long story short last rom I had was alliance last version, didn’t work for me, so I decided to install (FireNoteDeodexV20XGrandFinale)
So I booted into Safestrap 3.75(TWRP v2.7.1.0) by simply restarting my device and got that recovery or continue buttons.
So I did a factory wipe but I also did an advance wipe and checked (system).
After that I went to install and selected the above ROM zip and installed it and after I hit continue at the safestrap screen where it also says disabled it always has. It stays blank.
So I booted up to SS again and now whenever I select factory wipe or system wipe or try to mount I get the same message E:Unable to mount ‘/system’ and E:Unable to mount ‘/systemorig’
And now im stuck with no phone and cant install any ROM
Theres a lot of threads about this but please oh please masters bare with me I just need step by step, what should I do and what files do I need to download.
Your help is highly appreciated.

Are you on Jellybean or Kitkat..this should be in Q&A section. But we will try to get you going
FireKatV11...FireGearV16

Thx for the replay
On kitkat

mushtie2 said:
Thx for the replay
On kitkat
Click to expand...
Click to collapse
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.

done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexed_Ver_2.zip

warfenix said:
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.
Click to expand...
Click to collapse
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip

mushtie2 said:
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip
Click to expand...
Click to collapse
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work

warfenix said:
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work
Click to expand...
Click to collapse
Didnt work tried and it failed.

You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
mushtie2 said:
Didnt work tried and it failed.
Click to expand...
Click to collapse
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted

warfenix said:
You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted
Click to expand...
Click to collapse
how do i check md5sum?

mushtie2 said:
how do i check md5sum?
Click to expand...
Click to collapse
I believe urdroids op has it posted. And you can compare it to one you get. There are md5sum checkers on the playstore

you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.

mushtie2 said:
you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.
Click to expand...
Click to collapse
Lmao well its good you got it working again. I've been in the boat a few times

[Q] Droid 4 help

Finally upgraded my nokia n900 to a droid 4 and started playing with android.
Droid 4 is great, except all the verizon bloatware. That's the only real reason I've been looking at other roms. I've had a good go, but now back on the stock rom.
Is there a method of removing the bloatware, and a list of which ones remove from the stock rom?
I'd like to get another rom on the go. My issue is the wipe function in safestrap didn't seem to do a full wipe. When I go to install a new rom, it seems to show some of the data is already used. Is there a way to wipe literally everything on the phone? I tried installing cm11 to the stock rom and it loaded the droid 4 background and cm11 shortcuts for example.
Cheers

see [INDEX] Development Motorola Droid 4
miscellaneous

Cheers, read a good few of those already, but missed that thread with them all organised.
I take it we won't be getting any updates on this phone any time soon? So can I uninstall all the things on that list? I had a look and some didn't have an uninstall button, is there another method?
Hoe do you do a full format? Safe strap doesn't seem to do this.

v8amg said:
Cheers, read a good few of those already, but missed that thread with them all organised.
I take it we won't be getting any updates on this phone any time soon?
Click to expand...
Click to collapse
unlikely that the Droid 4 will get any more updates
So can I uninstall all the things on that list?
I had a look and some didn't have an uninstall button, is there another method?
Click to expand...
Click to collapse
Yes, you can disable (if that is an option), remove or rename (rename is safer, like adding .bak) using a root browser/explorer/manager, safest use Titanium backup pro to freeze the app or backup and delete (not as safe).
also can leave stock rom, and install a deboated stock rom like the ones posted under Jellybean Roms in my Index
Hoe do you do a full format? Safe strap doesn't seem to do this.
Click to expand...
Click to collapse
what do you consider full format?
You can reflash firmware with RSD Lite or Droid 4 utility
You can you can wipe system, user data, sd cards in safestrap.

Safestrap doesn't seem to format completely, I get an error on the sdcard, not external, and there are usually files left over. IE after a full format, it says 968mb free of 999, numbers are just an example.
RSD lite only seemed to install the stock rom and wouldn't install any others?
Cheers for the help.

v8amg said:
Safestrap doesn't seem to format completely, I get an error on the sdcard, not external, and there are usually files left over. IE after a full format, it says 968mb free of 999, numbers are just an example.
Click to expand...
Click to collapse
could mount sd card to pc, and quick format
RSD lite only seemed to install the stock rom and wouldn't install any others?
Cheers for the help.
Click to expand...
Click to collapse
Correct, RSD lite is only for Official Motorola Firmware

Possibly a silly question, but if its a 16gb phone, why does it come up as 8gb when plugged into a computer?
So if I format on the PC, will it still boot into safe strap on restart or will I need to rsd lite it?
I'm trying to have safestrap, a stock rom for the rare times I'll use the dock, and a light rom for daily use. Unless there is a better way around it?
CM11 seems the happiest, is there a summary for the roms? Or any other suggestions?
Cheers

Also, is there any way of just installing the play store and google maps without all the other crap?

v8amg said:
Possibly a silly question, but if its a 16gb phone, why does it come up as 8gb when plugged into a computer?
Click to expand...
Click to collapse
16gb is all partitions , before formating, and installing system, and bloatware files
So if I format on the PC, will it still boot into safe strap on restart or will I need to rsd lite it?
safestrap stores roms on internal sd card, so if you format internal sd card, all rom slots will be wiped. but safestrap it self is not on the sd card it is installed elsewhere.
I'm trying to have safestrap, a stock rom for the rare times I'll use the dock, and a light rom for daily use. Unless there is a better way around it?
Click to expand...
Click to collapse
not sure what you are asking? There is alt to safestrap, see Boot Menu Manager (BMM) in the Index
CM11 seems the happiest, is there a summary for the roms? Or any other suggestions?
Cheers
Click to expand...
Click to collapse
SlimKat is good, but there are too many variables, to suggest what will be best for you.
read the comments in the rom threads, and try a couple of roms.
---------- Post added at 04:25 PM ---------- Previous post was at 04:17 PM ----------
v8amg said:
Also, is there any way of just installing the play store and google maps without all the other crap?
Click to expand...
Click to collapse
Yes, see PA GApps: PICO MODULAR PACKAGE and [GAPPS][2014-12-15] Google Apps Minimal Edition for Android 4.4.x
You need to install a Gapps file that is compatible with the Roms android version, or there maybe problems.
---------- Post added at 04:39 PM ---------- Previous post was at 04:25 PM ----------
also Roms that do not include playstore, also do not include the support files for play store, like google framework....
I usually suggest installing one of the PA GApp versions like Mini or Micro.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

v8amg said:
Is there a method of removing the bloatware, and a list of which ones remove from the stock rom?
Click to expand...
Click to collapse
For Stock Rom you can use this.
v8amg said:
Also, is there any way of just installing the play store and google maps without all the other crap?
Click to expand...
Click to collapse
For CM11 you can use this.

Mentor.37 said:
For Stock Rom you can use this.
Hi Mentor. This is probably a stupid question, sorry, as I've only had my Droid 4 a few days...
I've tried CM11, but the battery life is not good enough, so I'm going to have to use some kind of modified stock ROM.
What is the main difference between using the above, and installing your ROM? And which would likely give the best battery life?
Thanks
Click to expand...
Click to collapse

In my stock rom there are some gapps that i left inside because a lot of user use them but personally i do not use any gapps and for this i create this patch that will completely delete every gapps in the rom.
This patch can be installed from who uses original stock rom or my stok rom.

[ROM][CM13][Marshmallow][6.0.1] for xt907 on xt926 [JBBL]

Hi,
to seperate the discussion happened in the cm12 thread I open this new thread.
I am not the developer of this rom and you have to try i ON YOUR OWN RISK!
First you need an unlocked JBBL Bootloader.
If you have not unlocked it yet look for tutorials here or use the sunshine app.
If you are on KKBL you have first to downgrade your Bootloader. I have used this howto:
http://forum.xda-developers.com/showthread.php?t=2789743
worked fine for me! BUT AGAIN: I AM NOT RESPONSIBLE IF YOU ARE DAMAGE YOUR DEVICE.
You have first to flash a TWRP Version for the XT907:
http://4pda.ru/forum/index.php?showtopic=403669&st=18740#entry45788372
And now the rom:
http://forum.xda-developers.com/droid-razr-m/general/rom-t3343987
And you need some gApps.
I use opengapps! works great!
YOU HAVE TO FLASH BOTH ON ONE TIME! FIRST IN QUE IS THE ROM AND THEN THE GAPPS!
On the first boot the optimization of the apps is in russian language. In the first configuration window you can choose your language!
The rom works really fine for me with one exception: I am in Germany and have to use hdspa+ with this device. I did not get hdspa+ working yet. maybe I need another modem file?
Other users have problems with bluetooth... for me bluetooth works fine!
NFC should not working... I have not tried!
Regards
Ibaxx
edit:
link for new build from 23th april 2016:
https://yadi.sk/d/bhD94py_rEVHc
first official build for razr hd:
https://yadi.sk/d/F_-QsaQGrHcDg
I have some huge problems with this build with an clean install! upgrade from xt907 build works fine...
xt907 build from the 1st may 2016
https://yadi.sk/d/vTsjh4DBrRbeC

Does it work on the xt925 as well?

I don't know, maybe I find some time at the weekend to try out! But I can't try the radio on my xt925, because the Sim Slot is damaged

Sadly this doesn't works on an MB886 (Atrix HD). I know, totally different device, but just wanted to tell.

ibaxx said:
I don't know, maybe I find some time at the weekend to try out! But I can't try the radio on my xt925, because the Sim Slot is damaged
Click to expand...
Click to collapse
Thanks, my father has this phone so I can't test it myself,I would appreciate if you could test it.

cm-13.0-20160423-port-ilichva-xt907_jbbl
---------- Post added at 09:39 AM ---------- Previous post was at 09:38 AM ----------
It.s msm8960 unified firmware, it will work on xt925

I have still Radio Problems... No HSDPA+ and WLAN connects only manually... Any ideas?

niton said:
cm-13.0-20160423-port-ilichva-xt907_jbbl
---------- Post added at 09:39 AM ---------- Previous post was at 09:38 AM ----------
It.s msm8960 unified firmware, it will work on xt925
Click to expand...
Click to collapse
Tried it again on a MB886 (Atrix HD) without luck. I think it's not unified or there is something wrong. I'm already using TWRP 3 but it always stays on "Patching system image unconditionally". Any ideas?

I think that twrp 3 is only for xt907, i have xt926 and using twrp 2800 jb to install this rom is working well and i try to instal with twrp 3 i have error 7 so i still using twrp 2800 jb for this rom.
Nprevette has allready build blissmm for jb bootloader (alpha) and I try to install it on xt926 and it won't boot to home screen using twrp 2800 and i try it too with twrp 3 and i have error 7 maybe the recovery is not compatible for blissmm..
Is anyone here try blissmm jb rom?

I don't know the error I got when I tried First to install through a xt926 Recovery... Habe you installed the xt907 twrp Version?
Also die someone come from Verizon Rom?
You have First Format internal data through Recovery
Else you got an error

Error7 mean you try to install wrong firmware, so, to install wrong firmware, you should install wrong recavery flash twrp 3.0.2 for xt907, run it, wipe all, except external card, twice and then try to install firmware, and keep patiance, its stuck on patching system for along time. Also, old safestrap recovery works well, you can try it

With the Recovery from 4pda it is not possible to install blissmm...
The download Server from Bliss was down yesterday evening... I couldn't Download the Recovery from there.

I allready try to install bliss6 with twrp 3 full wipe and format internal storage but still have "error 7 this rom is for msm8960 not for scorpion mini"

Got the same error! Also with the twrp from Bliss

The twrp Version from Bliss shows up the Micro SD two times... Attention on wiping!

cm-13.0-20160425-port-ilichva-xt925_jbbl by ilichva
as you can see, it's not xt 907 port, it's for xt925, use the same twrp 3.0.2 recovery
NFC is working now, HSPA+ should work too

Can i install it to xt926?

dedik46 said:
Can i install it to xt926?
Click to expand...
Click to collapse
have installed it on xt926 looks like it runs fine!
i will try it a few days

Sliding down the notifications bar to quicksettings did not work! any ideas?

Buggy AS hell !
No notifications in The bar .... Lockscreen didnt work... Hspa+ did not work! Laggy system!