where i can find this firmare 21.11.22.titan_retla.retla.en.01 iusmx? i flashed with USA version but a i don have service on the cel.
nomo2008 said:
where i can find this firmare 21.11.22.titan_retla.retla.en.01 iusmx? i flashed with USA version but a i don have service on the cel.
Click to expand...
Click to collapse
i have the same problem, unlocked bootloader, flAshed Kitkat XT1063 global single sim version on fastboot then upgraded to Lollipop global single sim also, everything worked but the "no network" and an error when searching for one. i have downgraded to stock Kitkat, relocked bootloader, still no network service... any help on fixing that?
You can try the Retail Latin America version:
i Suggest this two (if the first doesn't work, try whit the second):
First: http://www.filefactory.com/file/6967yytqrjv3/RETLA_XT1063_4.4.4_KXB21.85-22_cid12_CFC_SVC.xml.zip
Second: http://www.filefactory.com/file/4q2qr0gw8trj/RETLA_XT1063_4.4.4_KXB21.85-14_cid12_CFC_SVC.xml.zip
Tell me how goes you whit this.
Glad I waited before flashing any stock rom. I just got the same phone, just from Telcel. Hope to have some secure way to flash lollipop soon.
i flashed mine succesully but softbricked it while downgrading because i had no network, after some research i got lollipop working again, you just have to flash the Latin american modems from the correct firmware for your phone, mine was retail latin america single sim, thats how you get a perfect working moto g 5.0 in mexico, ill provide the link if asked for
Please do.
[/COLOR]Hasta abajo de este tutorial viene el link del modem.
Saludos.
https://getmovil.com/motorola/root-moto-g-2014-android-lollipop/
Related
Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Tenigima said:
Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Click to expand...
Click to collapse
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
theone_s_me said:
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
Click to expand...
Click to collapse
I am installing the Firmware correct brow, Prompt manually installed by using the right commands!
Sorry for my bad english
Sent from my XT1058 using XDA Free mobile app
Flash N910T with F910F ROM
Hello guys, I need your help. I got as I thought SM-N910F brand new in Russia with 4.4 KK. It worked fine except for being weak to work with 3G. 4G was OK. Russian localization was OK. When I tried to update the ROM, I discovered this device is not 910F but unlocked 910t instead. While experimenting with flash, I damaged efs. Then I restored it with Kies flashing stock ROM. So now I'be got lollipop phone which says "insert T-mobile SIM".
SI my idea is to flash it with some European ROM which support Russian language. Possibly, some 910f mod? Can somebody suggest which ROM to flash? Unfortunately, I didn't backup original ROM.
re: N910F
dmmos said:
Hello guys, I need your help. I got as I thought SM-N910F brand new in Russia with 4.4 KK. It worked fine except for being weak to work with 3G. 4G was OK. Russian localization was OK. When I tried to update the ROM, I discovered this device is not 910F but unlocked 910t instead. While experimenting with flash, I damaged efs. Then I restored it with Kies flashing stock ROM. So now I'be got lollipop phone which says "insert T-mobile SIM".
SI my idea is to flash it with some European ROM which support Russian language. Possibly, some 910f mod? Can somebody suggest which ROM to flash? Unfortunately, I didn't backup original ROM.
Click to expand...
Click to collapse
You cannot flash a N910T phone with a N910F custom or stock twrp flashable zip file rom.
What you need to do now is to find, download and ODIN flash the official firmware which
came with your phone in order to get your phone working properly again.
Sorry about that,
Have a great day!
Misterjunky said:
What you need to do now is to find, download and ODIN flash the official firmware which
came with your phone in order to get your phone working properly again.
Click to expand...
Click to collapse
Thank you, Misterjunky. There is no such a thing as "official firmware" for my phone. Because it was brought to Russia and unlocked unofficially as I can see now. They even changed the phone label on the back side. So they flash some custom firmware, I think so but I have no idea which one.
To put it more clear, what i have now is exactly official firmware. I've got it with Samsung Kies Tools - Firmware upgrade and initialization which downloads the official firmware based on model name and serial number. But unfortunately this is not what I need because it doesn't accept my local SIM
BoBCaTROM by @turilo worked for my device:
http://forum.xda-developers.com/not...cial-bobcatromn910fton910tw8-v2-0nk5-t2992648
But the problem with 3G persists. Device works with 2G and 4G without problem, but doesn't work with 3G. Any ideas how to adapt modem from 910C to this model?
Hello, I need to know if anyone knows where I can get the firmares for the Stock Mate S Vodafone Spain, put a clean firmare and all the time says a the message Defect Report Reminders, i try to open the boot loader and the huawei web says me asking me to wait 14 days
Is there any website or application to search stock firmwares or de Spain Vodafone?
Thank you!
I have the same problem.
Do you solved it?
-------------------------
Tengo el mismo problema
Lo has resuelto ya???
Do you want to restore the original firmware or do you want to flash another?
which model do you have? CRR-UL00, CRR-L09 or another one? Look for it in your phone settings and write the whole build number.
Hi, (sorry for my english)
I would like to obtain de original vodafone stock firm. Model CRR-L09, because i installed other original firm, but the "cust.img" is not compatible with my country and appears a warning in the phone.
The phone works fine, but i need to restore to original firm to sold it.
Regards
i can´t find the original update.app for the vodafone branded spanis mate s.
But if you have an unlocked bootloader, you can root your mate s, change the buildnumber in the build.prop and should receive the original update via ota.
I´m not sure about the right buildnumber. musst be CRR-L09C02B000 i think.
Tuerkay said:
i can´t find the original update.app for the vodafone branded spanis mate s.
But if you have an unlocked bootloader, you can root your mate s, change the buildnumber in the build.prop and should receive the original update via ota.
I´m not sure about the right buildnumber. musst be CRR-L09C02B000 i think.
Click to expand...
Click to collapse
I don't have unloock bootloader
I have to wait 14 days
Change Rom Vodafone Spain
Tuerkay said:
i can´t find the original update.app for the vodafone branded spanis mate s.
But if you have an unlocked bootloader, you can root your mate s, change the buildnumber in the build.prop and should receive the original update via ota.
I´m not sure about the right buildnumber. musst be CRR-L09C02B000 i think.
Click to expand...
Click to collapse
Hello,
I have Spain Vodafone rom and I want to change to a stock rom. I have unlocked bootloader and rooted but I'm not sure that to change the buildnumber it work in this phone. Can you specify a little more this procedure.
Many thanks.
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
athanazio said:
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
Click to expand...
Click to collapse
Pode fazer que não dá problema nenhum em trocar pra ZTO.. lá no sammobile do lado direito da pagina de download da firmware, tem os passo a passo do Odin.
athanazio said:
Hi guys,
I'm thinking about change my Note 9 (Brazilian version) firmware for a non carrier branded firmware in order to get rid of the carrier's bloatwares and also to get more often and recent updates.
Currently my device is running the following configuration: Current Version (when I try OTA update) N9600ZHS1ASB2/N9600OWA1ARK1/N9600ZCU1ARK1, Baseband N9600ZCU1ARK1, Build Number M1AJQ.N9600ZHS1ASB2, Service Provider Sw ver SAOMC_SM-N9600_OWA_ZTA_00_0025 ZTA/ZTA, ZTA/ZTA.
I've noticed at Sammobile that the Brazilian not carrier branded version of Android 9 Pie was just released two days ago.
As I run every one of my devices in English, the language of the firmware doesn't matter to much.
I would like to know what firmware versions I can put on my device without messing with the Knox "fuse". Can the ZTO version available in Sammobile be flashed on my device without any problems with Knox?
There are any other country firmware that I can flash on my device without messing with Knox and that could bring me OTA updates more often and in a more timely manner?
If any of the above mentioned options is viable, can someone help me with flashing in order to me get it done right? I already used Odin in the past, so, I think that just a brief explanation of what files are needed and if exists some kind of think that I need to pay special attention on the process (for example, found somewhere on internet someone that says that there are differences is the device is wiped or factory reseted after the update or not).
I really appreciate if someone could help me.
Click to expand...
Click to collapse
I´m Brazilian too...
You can install Pie rom ZTO from sammobile using HOME_CSC if you dont want to loose your files, but I never use HOME_CSC when I change to another Android version...
You will not to loose nothing.
Hi, I want to change my CSC to AUT/AUT/AUT/ZTO (I've read that you can't change the last code...) to get faster updates.
I live in Brazil (ZTO) so I'm doing this just to get updates faster. If I flash via ODIN the newest firmware using CSC instead of HOME_CSC will I be able to achieve AUT/AUT/AUT/ZTO and get OTA updates?
Will it trip Knox?
Will I ever be able to return to ZTO/ZTO/ZTO/ZTO? Thanks!
Ezito said:
Hi, I want to change my CSC to AUT/AUT/AUT/ZTO (I've read that you can't change the last code...) to get faster updates.
I live in Brazil (ZTO) so I'm doing this just to get updates faster. If I flash via ODIN the newest firmware using CSC instead of HOME_CSC will I be able to achieve AUT/AUT/AUT/ZTO and get OTA updates?
Will it trip Knox?
Will I ever be able to return to ZTO/ZTO/ZTO/ZTO? Thanks!
Click to expand...
Click to collapse
Normally no need to worry about the last part(ZTO). The main thing for you to get AUT. So if you flash regular CSC file it will wipe your data, but HOME CSC should not. I always used CSC file when flashing firmware. Try to see if you can get results you want from the first flash. In my case, I re-flashing 2 or 3 times to get what I wanted and used 3 different Odin versions. Normally after flashing, when you put your sim card in(on the welcome screen), the phone should see the sim and tell you if you want to apply carrier settings(do it) and phone will restart.
If you use official Samsung firmware, it should not trip Knox(never had issue with this)
You can flash your phone back to original ZTO firmware, when you need to.
In my case, I have S10e(single sim) unlocked(XAA) - US version. When I first put my sim card in, the phone applied carrier settings(T-Mobile) and became TMB/TMB/XAA, but the firmware was still from unlocked model. After that, I flashed T-Mobile firmware onto my phone and got features that T-Mobile branded S10e has.
pay nao funciona
Charkatak said:
Normally no need to worry about the last part(ZTO). The main thing for you to get AUT. So if you flash regular CSC file it will wipe your data, but HOME CSC should not. I always used CSC file when flashing firmware. Try to see if you can get results you want from the first flash. In my case, I re-flashing 2 or 3 times to get what I wanted and used 3 different Odin versions. Normally after flashing, when you put your sim card in(on the welcome screen), the phone should see the sim and tell you if you want to apply carrier settings(do it) and phone will restart.
If you use official Samsung firmware, it should not trip Knox(never had issue with this)
You can flash your phone back to original ZTO firmware, when you need to.
In my case, I have S10e(single sim) unlocked(XAA) - US version. When I first put my sim card in, the phone applied carrier settings(T-Mobile) and became TMB/TMB/XAA, but the firmware was still from unlocked model. After that, I flashed T-Mobile firmware onto my phone and got features that T-Mobile branded S10e has.
Click to expand...
Click to collapse
Olá... sou do Brasil e comprei meu S10+ SM-G975O Snapdragon 855 no eBay e o Samsung Pay não funciona!!!!! o que devo fazer
ederlucasrezende said:
Olá... sou do Brasil e comprei meu S10+ SM-G975O Snapdragon 855 no eBay e o Samsung Pay não funciona!!!!! o que devo fazer
Click to expand...
Click to collapse
I think you may have a Chinese version of S10+. I think they have 2 CSC versions: TGY which is Hong Kong and CHC which is Open China. Find out which one you have, TGY or CHC. I don't know for sure, but when I searched online, it shows that Samsung Pay is supported in Hong Kong.