Database Develop

Android 4.4 ROM

When we will have available an android 4.4 rom ? Is someone working on this ?

SilentGTX said:
When we will have available an android 4.4 rom ? Is someone working on this ?
Click to expand...
Click to collapse
Hey, well we can get some pre-alpha 4.4 AOSP builds maybe, but these will definitely have bugs, i do believe adam has built a 4.4. omni rom but i don't know much about bugs/boot status etc.
We are still waiting for cyanogenmod to merge sources, however they have stated that they are in no rush to start dishing out 4.4 roms as they have only just sunken their teeth into 4.3 Roms, we will get them eventually, however any builds within the next few days will have little customization or lots of bugs, patience is all we have till then
I hope this answered your question, also, this needs to be in the Q&A section next time bro
Good evening.

penguin449 said:
Hey, well we can get some pre-alpha 4.4 AOSP builds maybe, but these will definitely have bugs, i do believe adam has built a 4.4. omni rom but i don't know much about bugs/boot status etc.
We are still waiting for cyanogenmod to merge sources, however they have stated that they are in no rush to start dishing out 4.4 roms as they have only just sunken their teeth into 4.3 Roms, we will get them eventually, however any builds within the next few days will have little customization or lots of bugs, patience is all we have till then
I hope this answered your question, also, this needs to be in the Q&A section next time bro
Good evening.
Click to expand...
Click to collapse
Yeah thank you very much , it was very helpful , sorry for the wrong section . I can't wait for Android 4.4 ROMs :fingers-crossed: Good evening .

SilentGTX said:
Yeah thank you very much , it was very helpful , sorry for the wrong section . I can't wait for Android 4.4 ROMs :fingers-crossed: Good evening .
Click to expand...
Click to collapse
Please understand that all the great things you've been hearing about android 4.4 wont apply to us for quite some time, what i mean by this is all the efficiency/ performance improvements will be somewhat mitigated buy bugs and firmware incompatibilities, these things take time for devs to work through, 4.3 still isnt mature enough on this device to call it stable.
I just don't want people to get overly excited by a 4.4 port, its improvements will come gradually.

JoinTheRealms said:
Please understand that all the great things you've been hearing about android 4.4 wont apply to us for quite some time, what i mean by this is all the efficiency/ performance improvements will be somewhat mitigated buy bugs and firmware incompatibilities, these things take time for devs to work through, 4.3 still isnt mature enough on this device to call it stable.
I just don't want people to get overly excited by a 4.4 port, its improvements will come gradually.
Click to expand...
Click to collapse
I understand , of course , but still I can't wait :victory:

Gonna join this group, too
4.4 sure is on its way for our device, BUT:
Google is removing more and more support for our device, as it already is pretty old. So we need to re-add everything.
Even if it's booting, we still need a lot of work in order to get the most important stuff working (like SurfaceFinger, Audio, and ofc also data/RIL)
So regarding 4.4, all I can say is: Have patience
BTW, Thread moved to Q&A section

JoinTheRealms said:
4.3 still isnt mature enough on this device to call it stable.
Click to expand...
Click to collapse
im using pa 3.99 rc2 wich is 4.3 and it is perfectly stable, has great performance and no big bugs, i use it as a daily driver and it is the most perfect rom i used on my p880 till date

~MaX~ said:
im using pa 3.99 rc2 wich is 4.3 and it is perfectly stable, has great performance and no big bugs, i use it as a daily driver and it is the most perfect rom i used on my p880 till date
Click to expand...
Click to collapse
Yes they are functionally stable to a user, but to call a rom stable (at least by Cyanogenmods standards) requires more than that.

JoinTheRealms said:
Yes they are functionally stable to a user, but to call a rom stable (at least by Cyanogenmods standards) requires more than that.
Click to expand...
Click to collapse
please define stable then

~MaX~ said:
please define stable then
Click to expand...
Click to collapse
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.

JoinTheRealms said:
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.
Click to expand...
Click to collapse
Well.... Thank you
That's Well explained

I hope you are working on 4.4 rom
laufersteppenwolf said:
Gonna join this group, too
4.4 sure is on its way for our device, BUT:
Google is removing more and more support for our device, as it already is pretty old. So we need to re-add everything.
Even if it's booting, we still need a lot of work in order to get the most important stuff working (like SurfaceFinger, Audio, and ofc also data/RIL)
So regarding 4.4, all I can say is: Have patience
BTW, Thread moved to Q&A section
Click to expand...
Click to collapse
i'm really excited to see you releasing the 4.4 rom Aosp or custom, anyway your work is cool

You guys really doing great work here so l know that stable 4.4 will come eventually
Sent from my HTC Explorer A310e using Tapatalk 2

JoinTheRealms said:
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.
Click to expand...
Click to collapse
Sometimes it's still necessary to do. This is the case with our EGL libs for example. The best would be getting an update from LG, but this is very unlikely to happen. I got 4.3 BSP partially working, updated all graphics-related libs to 4.3 from grouper, but it broke a few things. Porting the full BSP might not be even possible.
Regarding Omni 4.4, I gradually found probably all needed patches for it, will see when I get to computer.
Sent from my OmniROM-powered LG Optimus 4X HD

Discussion Tread for Cyanogenmod 11 (Android 4.4.x KitKat)/ Cyanogenmod 10.2(jb)

Hello everyone, Like everyones know Galaxy mini (s5570) received kitkat/Jelly Bean(cyanogenmod 11/10.2[unofficial]) , since samsung stopped supporting this device devs've started a hard work to update this device.
All AndroidArmv6 Team specially @erikcas , @yajnab , @psyke83 (remember if i forget you and sorry)
and at the moment we're getting stable rom of kitkat and already stable jellybean
Kitkat 4.4.x:
Whats Working ??
everything
what is wrong on this rom ?
batery drains too faster this problems contains in many others kk ROMs including devices . ask google to fix .. xd
Jelly Bean 4.3.x:
Whats working ??
everything
Whats wrong on this rom ?
only small things
the rom was in alpha stage, but already is stable, some people using it daily.
At the moment Jelly beam 4.3 was a amazing rom for daily, lastest's releases from jenkins are incredible.
where i can find more info ?
- you can search for yajnab Tread in Original development section.
Where i can download the rom ?
- look for Jenkins.androidarmv6.org/view/Android/Builds (download only "TASS" builds)
you can look too for Review.androidarmv6.org (see it for reviews of fixed etc)
Where can i find Gapps ?
- i think no was a full package for Gapps (no much space left in the system)
Whats never going to be fixed ?
- google now voice search (dont wait for it, never going to be fixed, why ? device its armv6 google now voice search works only in armv7 .) and others few things
batery- KitKat really takes so much batery!
do thanks for devs of armv6 Team.
if possible donate or pay a drink for their
if you have anything that can help with the development post here. (fixes solutions etc)
i stopped testing with this Device since i buyed a Lg optimus L5(E612)
but i'm here you can use my PM to help (question possible solutions littles things too)
and sorry for my slower updates, its why i'm not at home theses days and i have only 5% of free time to check the forum.
Hot News!!! :
all changes are going to be merged so if any build have a old bug dont worry . only report .
psyke83 said:
Please folks, always take the time to upload logs. You appear to have no active developer who owns a Mini at this moment, so we (other androidarmv6 developers) rely exclusively on users to assist in fixing bugs specific to your device.
Click to expand...
Click to collapse

Link to CyanogenMod 11 for Galaxy Mini thead

AntiBillOS said:
Yes
Click to expand...
Click to collapse
So any progress? Just interested.

ast00 said:
So any progress? Just interested.
Click to expand...
Click to collapse
Working hard on get it builded.

AntiBillOS said:
Working hard on get it builded.
Click to expand...
Click to collapse
so any possible fix for android 4.3 cm 10.2 camera ? i think people forget it

AfonsoADR said:
so any possible fix for android 4.3 cm 10.2 camera ? i think people forget it
Click to expand...
Click to collapse
I even don't want to look at Android 4.3 coz it mutch laggy than 4.2*. Also I have no mutch free time, so I focused at Android 4.4.

AntiBillOS said:
I even don't want to look at Android 4.3 coz it mutch laggy than 4.2*. Also I have no mutch free time, so I focused at Android 4.4.
Click to expand...
Click to collapse
so contiue so. really no bigger diference of android 4.2 to 3 .
looks better work in 4.4 . ur correct . really looks lost time work in cm 10.2 i see this now

I've been looking at the Jenkins build bot from androidarmv6 team. It seems that they haven't managed any successful builds either.

programmargorp said:
I've been looking at the Jenkins build bot from androidarmv6 team. It seems that they haven't managed any successful builds either.
Click to expand...
Click to collapse
I don't it for boot.

on general kitkat just need minimum 512MB RAM right?? for JB need 1GB ram ??
sorry for my english

Guys,I dont want to destroy your hope but, I have 4.4 on my XT and RAM manager is still pretty same as it was on CM10.2 ..still 300mb +- RAM in use.
Maybe is minimum requirement 512MB but mini have only 279MB.

Villeness said:
Guys,I dont want to destroy your hope but, I have 4.4 on my XT and RAM manager is still pretty same as it was on CM10.2 ..still 300mb +- RAM in use.
Maybe is minimum requirement 512MB but mini have only 279MB.
Click to expand...
Click to collapse
384MB* About 105MB of it is system reserved, which is not accounted by the requirements.

Why are we worried? JB needs 1gb and it ran on Mini. KK needs half of it, it should run just fine.

android 4.4 was made by google optimized to take less ram memory.
will work better than cm10-10.1-10.2 .
galaxy mini no have a totally hardware support but no have problem try right ?

As my Gio just died, I'm back to reading these forums for the sake of keeping my brother's Mini decent now, haha.
Speaking of which, yeah, I'm curious how CM11 will run, seeing how anything up to CM10 runs smoothly (CM10.1 not so much, CM10.2 horribly).
We'll get a surprise. Two possibilities is that it's either going to run so horribly that we'll not even consider using it, or it'll be as nice and smooth as CM9 is if not better (Although I wouldn't count on that).

Harakhti said:
As my Gio just died, I'm back to reading these forums for the sake of keeping my brother's Mini decent now, haha.
Speaking of which, yeah, I'm curious how CM11 will run, seeing how anything up to CM10 runs smoothly (CM10.1 not so much, CM10.2 horribly).
We'll get a surprise. Two possibilities is that it's either going to run so horribly that we'll not even consider using it, or it'll be as nice and smooth as CM9 is if not better (Although I wouldn't count on that).
Click to expand...
Click to collapse
cyanogenmod 11 promisses , why kitkat was optimized low memory and more other optimizations.
lastest release of cm 10.1 was better than cyanogenmod 10 .
kitkat will run great on mini. i'm 100% of this

Cheer up, Jenkins seems to be able to build again.

For those who are interested in knowing about our progress.
http://jenkins.androidarmv6.org/view/Android/builds
I hope soon we will see a tass cm11 there :laugh:

cyanogenmod 11 on LG P500
1st release of armv6 device P500 (LG optimus one) was received a first cyanogenmod 11 : submission-test .
check'out here : http://jenkins.androidarmv6.org/job/submission-test/755/

now cooper(Galaxy ACE) receive submission test : http://jenkins.androidarmv6.org/view/Android/job/submission-test/757/
Sucess
Galaxy 5 received Cyanogenmod 11 : http://jenkins.androidarmv6.org/view/Android/job/android-experimental/340/

Lollipop for the Optimus 2x

Welcome to the official thread for the Lollipop roms for our Optimus 2x
As to start, this thread is exclusively for the developers who are interessted/working on on the Lollipop ports for our Optimus 2x
We had alredy some build like the OmniRom , CM12 and even ParanoidAndroid.
This thread is exclusively for discussions for the developers and for the testers to test the new made roms so I will update the links as the roms get made. So I am only posting here the links of the latest version, to get the versions from the past you wil need to browse throught this thread
Update 05/6/2016
Gucky did it again! New build for CyanogenMod 12.1 is up, and now with fixed camera! When I get the full list of working features and bugs, I will upload it here. Thank you Gucky for your massive help and contribution to this community. This device is very old after all, and you still find the time to tinker on it. No words really. Respect!
CM12.1 : https://sourceforge.net/projects/lg...cm-12.1-20160531-UNOFFICIAL-p990.zip/download
WARNING the Rom is still not stable, but we are close!
ParanoidAndroid: https://s.basketbuild.com/devs/Puri/p990/AOSPA(lollipop)
Take in mind that all these roms are unstable besides the CM12 rom,but it still has some major bugs which we as a group will fix.
As in all of this, stay tuned for updates

Good job my friend

Thank you very much. I'm downloading right now. It would be useful, if you could upload your (Lokal) Manifest, too. So we are able to re- build the rom with the necessary changes.
Looking forward!
Credits goes to you!

um
gucky01 said:
Thank you very much. I'm downloading right now. It would be useful, if you could upload your (Lokal) Manifest, too. So we are able to re- build the rom with the necessary changes.
Looking forward!
Credits goes to you!
Click to expand...
Click to collapse
um.......*noob mode activated.....BOOP * what you mean with manifest? lol

Could you please share your sources.
TheMysteryouse said:
Hello everyone.As you might know me from some threads where i comment some stuff.Anyways, since Lollipop was announced i was obssesed with it and my wish was that i would be the first one to make the version availble for our device.
Well i kinda did it....KINDA of course but we need some help if we wanna make it work.I call ALL of the developers for our device to work together to make it work.We are so close to get it fully booting.I made it boot to the animation and now where the help comes in use.We need some developers who can enable ADB on our device in the bootanimation.TO be honest i dont really know anything about sources and that stuff but i know some things.With the help of @tonyp and @timduru which I am the most thankfull of that gave me hope to make this.So here we go!
WARNING!!!
ONLY FOR DEVELOPERS
No one should download and flash this rom because you will get stuck in the bootanimation and will need to install previouse rom again and install everything over...blah blah blah.
Also the link to the rom is here ----> https://www.dropbox.com/s/fwhg08ux7qhtgsh/5.0 test.zip?dl=0
So if someone gets it working, please pm me in the progress. Cheers
Click to expand...
Click to collapse

TheMysteryouse said:
um.......*noob mode activated.....BOOP * what you mean with manifest? lol
Click to expand...
Click to collapse
a little help.
http://wiki.cyanogenmod.org/w/Doc:_Using_manifests

Oh
Hugo-PT said:
a little help.
http://wiki.cyanogenmod.org/w/Doc:_Using_manifests
Click to expand...
Click to collapse
Well to be honest, i dont really know how to share the menifest because i didn't use much the source. I was porting the Cm11 tonyp's rom and the rom from timduru, so i dont really know how to share the manifest lol

TheMysteryouse said:
Well to be honest, i dont really know how to share the menifest because i didn't use much the source. I was porting the Cm11 tonyp's rom and the rom from timduru, so i dont really know how to share the manifest lol
Click to expand...
Click to collapse
Did you change some files in the zips or did you build a new rom in the way Raum described, my friend?
http://forum.xda-developers.com/nexus-4/general/guide-cm11-how-to-build-cyanogenmod-11-t2515305

nope
gucky01 said:
Did you change some files in the zips or did you build a new rom in the way Raum described, my friend?
http://forum.xda-developers.com/nexus-4/general/guide-cm11-how-to-build-cyanogenmod-11-t2515305
Click to expand...
Click to collapse
nope, didn't touch anything other than the updater script i think and the build prop because i wanted fully stock experience

I can be your tester my phone got a battery problem so im having fun with flashing roms

I will try to exchange the updater script from my build with yours.
Lets see if I can flash mine.
And your your problem: I think there are one or more patches that we maybe need, witch timduru wont need because of the tegra3 hardware. (maybe some patch for our old egl hardware)

DJNoXD said:
I will try to exchange the updater script from my build with yours.
Lets see if I can flash mine.
And your your problem: I think there are one or more patches that we maybe need, witch timduru wont need because of the tegra3 hardware. (maybe some patch for our old egl hardware)
Click to expand...
Click to collapse
Well, it might be that he used KatKiss from timduru for the TF101 which has a Tegra 2, but still our phone uses the Tegra 2 AP20H, while the TF101 uses Tegra 2 T20. Small difference in the chipset, but still a difference. Easiest would be to port from the Galaxy R or Captivate Glide, but they too struggle with Lollipop over in their forum. Anyway, TheMysteryouse used timduru's AOSP rom, so maybe it would be easier building the whole thing from the demo CM12 sources available.

nonono
DJNoXD said:
I will try to exchange the updater script from my build with yours.
Lets see if I can flash mine.
And your your problem: I think there are one or more patches that we maybe need, witch timduru wont need because of the tegra3 hardware. (maybe some patch for our old egl hardware)
Click to expand...
Click to collapse
Nope, this rom has NOTHING to do with the tegra 3 rom.I used the rom for TF101 tablet which is tegra 2 but had a cmall chipset difference.So yeah I am still trying to do some things like searching the framework sources from tony to see if he has a code in the build.prop which directly enables ADB from the boot, but cant really find it.Anyways try your best and so the others.Cheers

Hi guys, after some testings I could get booting to finish. There are some errors left. But I will work further this evening and upload the rom afterwards. Think this will remain a test build for some time, till Tony or DJ can fix the errors.
Stay tuned!

Any video or screenshot? xD
Sorry for nob request, but working well or not, its great to our comunity
p.s. if need tester in future, you, TheMysteryouse or DJNoXD.
Im ready for

...WoW!...That´s Good News...Thank You for All of You, Guy´s...

gucky01 said:
Hi guys, after some testings I could get booting to finish. There are some errors left. But I will work further this evening and upload the rom afterwards. Think this will remain a test build for some time, till Tony or DJ can fix the errors.
Stay tuned!
Click to expand...
Click to collapse
Awesome news buddy! Lollipop on first power dual core android device! Switch to 1+ One as a primary phone for some reason but I will continue to follow and supporto you!

That is great!!! ))))))))

Ok. I have to go one step back. The rom is not ready for the testers and I'm too tired to test more. For those, who want to repeat my steps or want to finish...
I replaced the files in Mystery's rom with my own Kitkat ones. The first half, than the second. Now I could get it to finish the booting process. This steps I went on and on. So I could reduce the problem to the framework-files in "system". If you replace all of them, it boots up with some error messages.
I think we have to reduce the 40 files inside more and more to find the reason for the bootloop.
All the best to you,my friends!

Damm this is great a device from 2010 receives android L. 4years later. If I can borrow the old optimus 2x from my father then I could also look into the problems if it's not booting yet then. Till then continue your work.

Vanir Weeklies 4.1.2

Hey peps, who still had the vanir 4.1.2 by @bart452. Can share it please.

vaikz said:
Hey peps, who still had the vanir 4.1.2 by @bart452. Can share it please.
Click to expand...
Click to collapse
vanir? 4.1.2?
maybe 4.4.2, l5 or l7?
however check on bart452 mediafire https://www.mediafire.com/folder/8v5i5worzoun5/Nighlies"

4Freedom said:
vanir? 4.1.2?
maybe 4.4.2, l5 or l7?
however check on bart452 mediafire https://www.mediafire.com/folder/8v5i5worzoun5/Nighlies"
Click to expand...
Click to collapse
no jb, 705.
Back in the jb days, that was an awesome rom.
right now, I'll stick with cm10 base rom while waiting for L.
currently with slimbean 4.1.2 but bt force reboot the phone.
While touchwiz still had that random reboot also.

"4.1.2" ??? are you sure ?
I know that Bart452 have done a sh** incredible like hell great "4.3.2" VANIR release ! worked really really fine ! smooth ,finished and stable in the past....
but i'm very stupid not to have kept a copy myself !!!! i regret .....lost rom ! :crying:
( i regret not to have kept a CM10.2 made by IMER ! not known here on XDA , work very fine too ,perfect rom updated ,no bug..... sh** !!! he have broke his link and he didn't kept a copy himself )

Loulou-13 said:
"4.1.2" ??? are you sure ?
I know that Bart452 have done a sh** incredible like hell great "4.3.2" VANIR release ! worked really really fine ! smooth ,finished and stable in the past.... [emoji14]
but i'm very stupid not to have kept a copy myself !!!! i regret .....lost rom ! :crying:
( i regret not to have kept a CM10.2 made by IMER ! not known here on XDA , work very fine too ,perfect rom updated ,no bug..... sh** !!! he have broke his link and he didn't kept a copy himself )
Click to expand...
Click to collapse
Hmmm, I really can't recall [emoji28] and not sure what version but its one of the best. What sure is its jb.
Me too, so sad don't have a copy or forgot where I saved it.
[emoji24]

For me ,i "vote" for a good new CM11 with the last source ! :angel:
==> http://forum.xda-developers.com/optimus-l3-l5-l7/general/l5-l7-lollipop-t2975795/page32
I think that it's the best way for to have a "fresh air" on our poor phone , because it's popular and very simple ,there are enought goods parameters for a full usage ( without personalization liquid ,Carbon ...etc... ) and with our own prefered launcher and themes => it's "perfect" ! :good:

Loulou-13 said:
For me ,i "vote" for a good new CM11 with the last source ! :angel:
==> http://forum.xda-developers.com/optimus-l3-l5-l7/general/l5-l7-lollipop-t2975795/page32
I think that it's the best way for to have a "fresh air" on our poor phone , because it's popular and very simple ,there are enought goods parameters for a full usage ( without personalization liquid ,Carbon ...etc... ) and with our own prefered launcher and themes => it's "perfect" ! :good:
Click to expand...
Click to collapse
We just hope so.
Right now L7 devs had been awol now.
I don't know if we still have one.

Need help compiling AOSPA nougat!!

Hello everyone, I'm sort of a newbie in ROM building, and decided to compile ParanoidAndroid nougat for hammerhead. I followed the instructions from - https://github.com/AOSPA/manifest
Once I run ./rom-build.sh hammerhead, it runs for about 15 seconds before giving me the error in the screenshot attached.
Any help would be appreciated, thanks!

Wow I just realised those guys are still dead. They release a new version every 2 major Android releases. ? Even amateurs Devs (compared to them) release ROMs far more often. A bunch of ?s.
Sent from my Nexus 5 using Tapatalk

fr3quency said:
Wow I just realised those guys are still dead. They release a new version every 2 major Android releases. Even amateurs Devs (compared to them) release ROMs far more often. A bunch of ?s.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
They're working daily on that. you're free to compile and if you're smart enough you can successfully compile it :silly:
---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------
DaNightmare said:
Hello everyone, I'm sort of a newbie in ROM building, and decided to compile ParanoidAndroid nougat for hammerhead. I followed the instructions from - https://github.com/AOSPA/manifest
Once I run ./rom-build.sh hammerhead, it runs for about 15 seconds before giving me the error in the screenshot attached.
Any help would be appreciated, thanks!
Click to expand...
Click to collapse
You'll need some knowledge to compile it. You need to import some features from bullhead or angler and adapt it.. It's kinda hard especially if you're starting. I advice you to start building AOSP first and learn from that.

fr3quency said:
Wow I just realised those guys are still dead. They release a new version every 2 major Android releases. Even amateurs Devs (compared to them) release ROMs far more often. A bunch of ?s.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yo you are so ungrateful, show some respect! The only clown is you.
You clearly know nothing about what you are talking about. The Dev's behind AOSPA want to bring a quality ROM, they don't want to rush thing to take a step back in the Custom ROM scene and bring a buggy ROM, so instead they take their time to come up with something nice and good (probably). How fast a Dev can bring up a ROM and update it tells nothing about the quality of the ROM. AOSPA was awesome back in the JellyBean and KitKat days, I'm sure their Dev team is working hard to get back on that level. Instead of whining about them being slow with releasing, you could give them some help or just give it some time and be patience to see with what they are coming up with.

Mr.FREE_Bird said:
Yo you are so ungrateful, show some respect! The only clown is you.
You clearly know nothing about what you are talking about. The Dev's behind AOSPA want to bring a quality ROM, they don't want to rush thing to take a step back in the Custom ROM scene and bring a buggy ROM, so instead they take their time to come up with something nice and good (probably). How fast a Dev can bring up a ROM and update it tells nothing about the quality of the ROM. AOSPA was awesome back in the JellyBean and KitKat days, I'm sure their Dev team is working hard to get back on that level. Instead of whining about them being slow with releasing, you could give them some help or just give it some time and be patience to see with what they are coming up with.
Click to expand...
Click to collapse
It was my primary ROM for YEARS. There are other ROMs that cannot achieve their quality and yet I haven't encountered any bugs at all on those ROMs. How come?

fr3quency said:
It was my primary ROM for YEARS. There are other ROMs that cannot achieve their quality and yet I haven't encountered any bugs at all on those ROMs. How come?
Click to expand...
Click to collapse
Fair question, maybe it's because those ROM's you talk about made a decision between bringing quality or fixing bugs fast. PA probably goes for bringing a quality ROM instead of rushing on things to fix bugs and bring a "half work" ROM. Who knows? I guess we will see eventually

http://jenkins5.legacyserver.in/job/aospa_hammerhead/69/console

marcomarinho said:
http://jenkins5.legacyserver.in/job/aospa_hammerhead/69/console
Click to expand...
Click to collapse
Can you share the build?

theShadow800 said:
Can you share the build?
Click to expand...
Click to collapse
When everything is stable I will release it

marcomarinho said:
When everything is stable I will release it
Click to expand...
Click to collapse
Okay thank you!

I actually had downloaded Paranoid android 7.1.2 from AFH, idk if it was your build @marcomarinho , but it was working flawlessly. It had OMS, but i restored my backup and removed zip file... anyways it was working

aciupapa said:
I actually had downloaded Paranoid android 7.1.2 from AFH, idk if it was your build @marcomarinho , but it was working flawlessly. It had OMS, but i restored my backup and removed zip file... anyways it was working
Click to expand...
Click to collapse
I'm working close with AOSPA team to make it stable. There's much to do.. fix camera, video player, wifi... Only after that I'll release with the permission of paranoid Android team only!!

@marcomarinho how is the work under PA going?

aciupapa said:
@marcomarinho how is the work under PA going?
Click to expand...
Click to collapse
In the final stage almost ?

marcomarinho said:
In the final stage almost ?
Click to expand...
Click to collapse
Great! If you need any testers, logs etc PM me

marcomarinho said:
In the final stage almost ?
Click to expand...
Click to collapse
As @aciupapa said if you need testers or something contact us, really glad to help :good:

My nexus 5 died... 2 day ago motherboard has failed