WTF... I had one of our VP's bring me his Tilt and the thing is just booting to the bootloader screen and says Serial at the bottom.
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
But that's not all... When I plug in a USB cable it changes the 'Serial' to 'USB'. However, the USB plug on the bottom of the phone is mangled up with bent pins, so I'm not even sure it's making proper contact. I've tried straightening them out the best I can, but they still look slightly bent to me. Anyway, here's what I've tried.
1. If I reboot the phone without the USB cable it goes straight into bootloader mode (I see a quick "missing image file" message or something like that then the red/grn/blue screen).
2. If I reboot the phone WITH the USB cable connected it boots up fine into Dutty's ROM, but it never makes an ActiveSync connection. Like the PC doesn't see it.
3. I copied a new ROM (named it KAISIMG.nbh) to the SD card and followed the instructions posted by vip_snoopy. But when it goes into the bootloader, it won't load the new ROM (nothing happens at all).
4. I downloaded MMTY, but when I launch that application, it doesn't give me the USB option even though the phone is connected and I see USB at the bottom of the bootloader screen. Arrrgh!!!
This sux! Trust me, I've searched this forum, Googled and found some posts related to this, but nothing has worked and I can't find a solution. With the mangled USB connector and the phone not letting me load a new ROM via the SD card, it seems I'm stuck. I'd like to get this phone back to the point where I can at least attempt a warranty return. Either that, or fry it out so they can't see the Oli SPF or ROM installed. At least then I can tell them the motherboard died or the device is fried or something...
Any help or advice would be greatly appreciated. Otherwise, I'll rip this thing apart and use the screen, keyboard, etc. for spare parts. Luckily this is a work phone so it's nothing out of my pocket. Although, it sux b/c I had to give my Tilt to the VP and now I'm temporarily using my old Treo 700w (yuck!) until I can get a replacement.
Thanks!
same proble with 2 different TILTs
both device are AT&T TILT, no problem with miniUSB connector.
Both devices are with original ROM
R 1.27.12.11
G 22.45.88.07H
D 1.57.00.00
when turning on bootloader, the serial appears, and while connecting the cable it turns to "USB" but no sync or USB recognition.
I unistalled and installed the activesync 4.5 and have no proble syncing other devices. (no driver problems)
did anyone heard about this problem?
many thanks!
I have a friend that got a Tilt and within a couple of days the pins inside the mini usb were messed up. He had to have it exchanged. Also, somewhere around here there is a thread because this is a known issue. I think your VP used a car charger or something.
ChumleyEX said:
I have a friend that got a Tilt and within a couple of days the pins inside the mini usb were messed up. He had to have it exchanged. Also, somewhere around here there is a thread because this is a known issue. I think your VP used a car charger or something.
Click to expand...
Click to collapse
must have been me....
@egypt 123: But what you describe is exactly what happened to my tilt. I did manage to reflash the thing from the SD card tho before a warranty exchange took place.
It took me serveral tries to get it to flash from SD. so I thinking is must be either a *****y card or you didnt follow instructions exactly. My was the later.
Good Luck
Alright, I tried first with the stock rom: different usb cables, kies, installing uninstalling samsung drivers, double twist, on a mac and on windows 7, and nothing works, no matter what I tried, none of that could show me the notification bar asking for what to do with the usb connection. Of course I tried setting the phone on debugging mode and on mass storage, also ask everytime, etc.
Finally I decided to leave the stock rom and move to Cognition froyo, in order to discard a hardware issue. Thanks to Rom manager I could make it without needing the usb at all.
Once in Cognition v2.3b8 I crossed my fingers and looked to the sky (even considering that I'm atheist) and plug in the usb to my computer.... and nothing happens besides the phone charging.
Can I say right now that this is definitely a hardware issue?
Some people here are use to say, "if it's charging, definitely it's a drivers issue", but after moving to a new rom, and trying in three computers (two windows and one mac) it is a drivers issue that I can fix without buying a captivates motherboard?
Please help me out here and I'll buy you a beer, a blue moon one if you like ;P
Have you played with your USB settings; debugging, mounting SD card etc?
dionieins said:
Alright, I tried first with the stock rom: different usb cables, kies, installing uninstalling samsung drivers, double twist, on a mac and on windows 7, and nothing works, no matter what I tried, none of that could show me the notification bar asking for what to do with the usb connection. Of course I tried setting the phone on debugging mode and on mass storage, also ask everytime, etc.
Finally I decided to leave the stock rom and move to Cognition froyo, in order to discard a hardware issue. Thanks to Rom manager I could make it without needing the usb at all.
Once in Cognition v2.3b8 I crossed my fingers and looked to the sky (even considering that I'm atheist) and plug in the usb to my computer.... and nothing happens besides the phone charging.
Can I say right now that this is definitely a hardware issue?
Some people here are use to say, "if it's charging, definitely it's a drivers issue", but after moving to a new rom, and trying in three computers (two windows and one mac) it is a drivers issue that I can fix without buying a captivates motherboard?
Please help me out here and I'll buy you a beer, a blue moon one if you like ;P
Click to expand...
Click to collapse
I'm pretty sure there's a problem with your USB cable if it's not the drivers. Try using a different cable and check.. Should work!
I am having the same issue and I took it to AT&T device warranty center and they found that the USB side on the phone had some water corrosion in it and therefore my warranty is voided. I also went down the path of installing drivers, different OS but this seems to be close. now If some can tell me how to clean this port...awesome
Is the water sensitive patch under the battery still white?
rockosifraldi said:
I am having the same issue and I took it to AT&T device warranty center and they found that the USB side on the phone had some water corrosion in it and therefore my warranty is voided. I also went down the path of installing drivers, different OS but this seems to be close. now If some can tell me how to clean this port...awesome
Click to expand...
Click to collapse
First make sure its not the usb cable. Main power leads in cable usually hold up but smaller wire leads are much more fragile and the only symptom you may get is either wont be recognized and/or usb registers as data connection on the dropdown menu. Ive had a captivate with a corrosion problem but Ive also had a Samsung cable that had broken shorted out data lead but still charged fine.
You can clean port with fingernail emery board cut to shape and stripped on one side of board to proper thickness. Its a five minute mod to a 99 cent board.
rockosifraldi said:
I am having the same issue and I took it to AT&T device warranty center and they found that the USB side on the phone had some water corrosion in it and therefore my warranty is voided. I also went down the path of installing drivers, different OS but this seems to be close. now If some can tell me how to clean this port...awesome
Click to expand...
Click to collapse
I've seen long threads of people who reported the same issue: no actual water damage, but a messed up USB port and their warranties being unjustly denied. Try cleaning the contacts in the phone's microUSB port with a coffee filter dabbed in rubbing alcohol, or scratching at them with a thin wire.
I'm currently having USB port issues with my brand new replacement Captivate (phone sometimes randomly thinks it's plugged in when it isn't, thinks it isn't plugged in when it is), haven't had any luck fixing them yet.
If there's no visual residue on the charging port, they cannot rightfully void your warranty. The captivate has 2 LDI's(Liquid Damage Indicators), one on the battery and one on the phone itself, behind the battery. As long as those two are white, and as long as there isn't a bunch of green crap on the charging port, they will replace it.
I work at AT&T, and we deal with this everrrrrrrrry day. 3 big rules with warranty swaps; LDI's need to be white, charging ports need to be intact and not corroded, and there needs to be no physical damage, any scratches or dings that you can feel with a fingernail are considered physical damage. We help people who terlet their phones get warranty exchanges sometimes, nothing an exacto knife and some raw effort can't fix. AT&T is a weak beast, be assertive and they will bend to your will.
In all honesty though, just make the charging port as clean as you can and call in. Ask for a supervisor, tell them it's a documented defect with a recent wave of Captivates, and you won't hang up until they exchange it for you.
well thanks for the help, now I'm gonna check the white indicators and if the phones usb needs to be clean
dionieins said:
well thanks for the help, now I'm gonna check the white indicators and if the phones usb needs to be clean
Click to expand...
Click to collapse
well I cleaned the phone and still is not working, this is a hardware issue definitely
dionieins said:
well I cleaned the phone and still is not working, this is a hardware issue definitely
Click to expand...
Click to collapse
I had that problem with my brand-new second Captivate out of the box. Not going to deal with warranty and bull**** water damage accusations, this is being returned to the retailer first chance I get.
I've had something weird happen as well. I've had my Captivate plugged into my PC using USB Debugging at least 10 - 15 times today. I also clicked "Mount" so I could transfer files that I have backed up.
Now suddenly it stopped working. I have jumped around using every port on my laptop (all 4). I have noticed it's acted weird before.
But now (without anything plugged in at all) the laptop keeps popping up saying USB Device Not Recognized.....even though I'm not trying to plug anything in.
Should I reinstall the Samsung 32 bit drivers? I did uninstall Kies today because I had no use for it. It was annoying to have Kies open every time I plugged in.
I have a captivate lying around which have the same problem, i/e the USB cable works fine for charging but not for PC connectivity.
Since it is a development phone, I just reverted to using adb wireless widget.
Other than that, after reading this thread, it seems to be a common issue.
I got my phone exchanged (again) and no USB or GPS problems this time. I got a grainier-looking screen though...meh can't complain really, since this is the only Captivate I've owned that doesn't have any major/hardware-related problems.
My USB not working ended up being my laptop (not phone). I had to unplug the power supply....shut down for a few minutes.....reboot and it worked. I had tried reinstalling the drivers but it did nothing.
mikegy2002 said:
First make sure its not the usb cable. Main power leads in cable usually hold up but smaller wire leads are much more fragile and the only symptom you may get is either wont be recognized and/or usb registers as data connection on the dropdown menu. Ive had a captivate with a corrosion problem but Ive also had a Samsung cable that had broken shorted out data lead but still charged fine.
You can clean port with fingernail emery board cut to shape and stripped on one side of board to proper thickness. Its a five minute mod to a 99 cent board.
Click to expand...
Click to collapse
I appreciate the advice use some acetone to remove the green stuff but phone is still being difficult when trying to connect to the pc ...be nice if samsung came up with something so there wouldnt be a possibility that water would get in the port
I've had this problem since i got my phone, and i've had it for months now.
Always thought it was drivers.
My last try was with the new AIO captivate tool box app and the drivers their.
For those of you that got replacements how did you go about this.
just go to the store? Or is there a number to call to do it over the phone?
It's just annoying not being able to transfer pictures and such off my phone, hell it worked with my iPhone. I know you can setup wifi file transfers, but if i'm at a friends house it would be nice just to be able to plugin the phone and transfer files too it.
I fixed this problem selling out the phone. Not joke.
BUT, thing is, that the buyer, couple days after the purchase, told me that he fixed this issue by simply restoring the phone to the stock rom through odin 1 click.
Why I didn't try that easy fix? Simply because I thought that the phone was already in the stock rom :S
Lesson learned: always double check if you're in stock rom or not. (obviously you don't need to do this if your purchased the phone brand new!)
It's really weird, a week ago my phone suddenly freezing while I was out, I took the battery off and put it back but it was stucking on AT&T logo scree. I've tried that for few times nothing changed, put it away and the next day tried for few more times and this time came up (also recovery mode and 3 buttons didn't work too).
Everything was look fine but had a problem it was when I plug the USB cable it's just showing the charge status, means couldn't connect the Phone to PC ,I tried with some other cables and PCs, also put hair dryer if possibly water went in but the problem was from the phone.. also when took the USB off the charging status was keep going. first thing I thought it would be the ROM, I had some other ROM in the memory to I flashed to another ROM, but the problem was still there.
tried many times nothing changed, I was almost wanted to grab a new one, till 2 nights ago after a week while it was charging I suddenly noticed that it can connected, I straight away got backups copied to PC and flashed to Stock, now everything looks fine after few days and it works good.
any suggestion on that? is it could be water inside or something?
My ROM was Cognition 2.3 at that time
hope it's not gonna happens again.
I had the same problem and it was a bad USB port any phones made before December '10 have had a lot of problems. Warranty gave me a replacement without question.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
HI everyone.
Im wuold really need some help with this problem.
My phone have had some problems with connecting with usb earlyer and its been coin flip will pc regonize it, well after instaaling some apps and making back up before that i noticed that im getting black screen and have to reboot to get my galaxy screen working back.
FInally i made factory reset but then i got really big problem, when i start galaxy it shows the galaxy text and after it that flashing S logo but after it screen goes black and thats pretty much it!
Also usb not working dont know shuold it be in that state working!?
And pressing those 3 buttons wont do anything have tried multipletimes everyday, so my phone has locked me out pretty good is there any solutions on that? Or is my phone totally ****ed up?
Hopefully you will be able to cure it with the jig method (look in dev section)
Sent from gt i9000 insanity 8.5/fugumod
What rom where you on before ?
Well phone where updated with Froyo 2.1 but nothing else. oh it were also rooted and thats about it! have been thinking about to sending phone back to the manufacturer! dont really have time trying to find some cure for it.
Rooting = no warranty so you would be best to clear it via jig just in case .
jje
rere
hi there it been longtime since i wroted here.
Well i tryed the jig method with usb cable and with single 300k resistance, made little mistake not to measure it before because there is a 5% tolerance with it so my resistance were only 294k. Doesnt work btw phone dont do anything with it, well i have to make new cable and be sure that it is the 301k resistance. will be adding new info after it what will happen. Im slightly scare that even getting that right resistance it wount do anything, it wuold be that point when i will send it to samsung and maybe get it working again.
Downloading...
okay. next problem with jig managed to get my phone to download mode!! JIIHAA
but now my computer cant regonize it!? actually this problem had before the magical black screen. Any solutions for that? have installed new usb drivers and oldones but cant find it.
PLS need more help!!
Sounds like you need to clean the cable. I've had a hell of a time with these issues in the past. When it is on again off again (or you just get 'generic device' or unkown device) then try cleaning the port on the computer with running alcholol and something tiny enough to get in there.
I did that after a huge long search on here and it was like freakin magic. 8 drivers popped up all at once!
Never hurts to do the comp and the cable too (and make sure its not a charging only micro usb...).
G
Hey Xda,
I'm certainly not a newbie to flashing/modding but this one puzzles me quite a bit:
Today I got a Galaxy Note from a good friend of mine, the device is still running on stock ROM and has never been rooted.
When I try to boot up the device you'll hear the usual boot sound and after a while the softkeys backlights will light up, while the screen won't. My friend reported to me that he had issues in the past connecting the device to any given windows PC, as they won't even recognize the device. I however can't verify this as I'm using arch Linux on almost all of my workstations.
The main objectives are:
- backing up the entire internal storage, because my friend produces music and there are lots of samples/unfinished tracks on this device
-eventually get this device working again.
The main problem is deciding whether the device has defective hardware or just somehow screwed up firmware.
The gameplan so far is backing the device up via adb if nothing else is working and then reflash the whole damn thing, if there is still no improvement I guess the hardware is to blame.
Any constructive advices on your end? It would be much appreciated as this seems to be a fairly common problem. Anyways I'll keep you up to date
Are there any touch haptic responses on the screen? Then this could be an issue of corrupt or wrong bootloader installed.
Try booting into recovery and/or download mode.
And check for a battery icon while charging and off.
A problem with the boot loader on stock android without even root sounds unlikely.
If the screen stays black, i thinks its very likely that the connector from the display came loose.
lucky you, the note is not that hard to take apart, and the connection should snap back in no problem. In fact, i think that should be stap one, check the connection.
About connecting to the pc, that could be more difficult. From the description i think the usb board is in need of replacement. Also a relatively common, cheap and easy fix, but make sure you get the same revision as the one you have now.
---------- Post added at 02:05 AM ---------- Previous post was at 01:49 AM ----------
Another idea would be to connect an mhl cable and use that to see what should be on the screen. This depends on the usb port being fine, but may be worth trying anyway.
So for the purpose of continuity I'll post any useful links I used along the way.
At first I'll back the device up. This will be no problem as adb works just fine on my Linux box with this device. The next step would be trying this:
http://forum.xda-developers.com/showpost.php?p=25202942&postcount=7
If that does not work I'm assuming defective hardware/or bad connection due to dust. I'll disassemble the device like this:
http://m.youtube.com/watch?v=N6CJy7...kZ4-Yg&usg=AFQjCNGp378LsVHTIBkf62THSVDqsWM7uQ
And clean up the connector/ribbon plug with isopropyl alcohol
I managed to reset my old account so I'll be posting from this one, not to cause any confusion...
if you are getting charging animation
or galaxy note logo on bootup
then you need to flash an alternate kernel or reflash original
else forsure there's something went wrong with your hardware
Model Name: ROG 3 trncent edition( ZS661KS)
Firmware Version:WW-17.0823.2012.131
Rooted or not: yes ( was trying to root)
Frequency of Occurrence: Got<HARDBRICKED>
APP Name & APP Version (If your issue relates to the app): no app used.(magisk or anything else)
In addition to information above, please also provide as much details as you can, e.g., using scenario, what troubleshooting you've already done, screenshot, etc.
========================================
My rog phone 3 (tencent), which i brought about 6 months ago. I never had any issues like this.
The other day i opened my camera and suddenly the front camera was not working. I restarted the phone, did factory reset, cleared camera data, but nothing solved the issue. I thought i have to upgrade the firmware. So i downloaded the new firmware (2012.143) and connected the usb c cable with my laptop ( lenovo ideapad 320) , but it did not recognize. i tried both ports. I never had this problem before. I unlocked the bootloader, i thought it might help. I also turned on the developer option and selected FTP protocol and USB debugging. But it still didn't connect. while i was trying to enter bootloader recovery mode I accidently put the phone on EDL mode and now its bricked . The indicator light is flashing when i connect to the pc but the PC isn't recognizing the port ( i downloaded the qualcomm EDL driver on my laptop also, but the port option is not showing at all). Is it hardware problem, But the phone was charging just fine.
please suggest some help
Sounds like a hardware malfunction or damage to something on the board (burnt out microchip or resistor something along those lines) something a cell phone or repair shop could have fixed but.. it sounds like you bricked it in combination with the other issue which your best bet now is a new rog phone and sell your current one for parts or repair.. just because the cost to repair it would probably be more than what it is worth as it would require professional repair.
darkensx said:
Sounds like a hardware malfunction or damage to something on the board (burnt out microchip or resistor something along those lines) something a cell phone or repair shop could have fixed but.. it sounds like you bricked it in combination with the other issue which your best bet now is a new rog phone and sell your current one for parts or repair.. just because the cost to repair it would probably be more than what it is worth as it would require professional repair.
Click to expand...
Click to collapse
Bro my phone turned on, and it functioned normally, i didn't brick it, it was probably battery dead, i charged it for hours and it turned on.. But how do you fix a power IC that supply power from the battery . Is it the one in the (picture) , Because sometimes when it charge it gives only the green light and black screen.
Iam having an issue on debug. My bottom side is ok on getting debugged.. but my side port tends only to go in charging state.. mine not rooted or anything. Im just trying to downgrade firmware. any advise?
Firdhaus81 said:
Iam having an issue on debug. My bottom side is ok on getting debugged.. but my side port tends only to go in charging state.. mine not rooted or anything. Im just trying to downgrade firmware. any advise?
Click to expand...
Click to collapse
Try different cable. Been there seen it before