Qi Issues - Nexus 6 Q&A, Help & Troubleshooting

Is anyone finding that their phone doesn't charge wirelessly? I tried a total of 4 devices, and 2 qi chargers last night and every device worked correctly for each charger except for the N6. I saw a MBKHD vid of how he couldn't get Qi working, but have seen other vids with people doing it no issue. Are there some defective devices out there or something?

Moostafa29 said:
Is anyone finding that their phone doesn't charge wirelessly? I tried a total of 4 devices, and 2 qi chargers last night and every device worked correctly for each charger except for the N6. I saw a MBKHD vid of how he couldn't get Qi working, but have seen other vids with people doing it no issue. Are there some defective devices out there or something?
Click to expand...
Click to collapse
My Nexus 5 charger works but the 6 has to be placed just so to get it to charge. The coil seems to be south of the phones equator.

Birdsfan said:
My Nexus 5 charger works but the 6 has to be placed just so to get it to charge. The coil seems to be south of the phones equator.
Click to expand...
Click to collapse
I tried that charger and another one. Held it to the back with my hand, and slowly started sliding it all over the back of the phone to attempt to find a sweet spot. It never worked for me. :crying:

I found the nexus 5 charger very difficult, and it will not charge with the Motorola turbo charging block powering it. You need to use a regular AC/DC adapter.
The Nexus 4 Orb charger works fairly well, you need to be a little careful with placement but surgical like precision is not necessary. I would not buy this charger for the n6, but since I have it I will use it at work.
I did buy a Nokia dt-910 last night. This charger is supposed to work well with the n6.
-Rob

robber said:
I found the nexus 5 charger very difficult, and it will not charge with the Motorola turbo charging block powering it. You need to use a regular AC/DC adapter.
The Nexus 4 Orb charger works fairly well, you need to be a little careful with placement but surgical like precision is not necessary. I would not buy this charger for the n6, but since I have it I will use it at work.
I did buy a Nokia dt-910 last night. This charger is supposed to work well with the n6.
-Rob
Click to expand...
Click to collapse
If I remember right, the Nexus Wireless Charger requires a 1.8A supply, and the Turbo charger is only 1.6A. That may be one issue. Another is that I'm pretty sure the Nexus charger determines the source type the same way Android phones do. In other words, it requires that the data pins be shorted together (otherwise, it assumes you're connected to a 500mA computer USB port). Use a standard "power only" cable (which doesn't have data wires at all), and it won't work. In either case... even when it does work, it's probably the worst charger for the N6. It was really designed to use those magnets for proper alignment, and without them, the N6, which has to be placed off-center, tends to fall off.
The Nokia DT-910 is probably one of the best chargers for the N6. Its only downfall is that it's a lower-amperage charger (I'm not at home to check, but I want to say 900mA-ish.) Still charges the N6 in a few hours though, so I've never really had an issue there.

robber said:
I found the nexus 5 charger very difficult, and it will not charge with the Motorola turbo charging block powering it. You need to use a regular AC/DC adapter.
The Nexus 4 Orb charger works fairly well, you need to be a little careful with placement but surgical like precision is not necessary. I would not buy this charger for the n6, but since I have it I will use it at work.
I did buy a Nokia dt-910 last night. This charger is supposed to work well with the n6.
-Rob
Click to expand...
Click to collapse
I tried different cords, power blocks, and I even have a wall outlet in my house that has USB ports directly into the power.

My old wireless orb and a Zens charger seem to work fine. Maybe a tad warm when I pick up from charger.

Nexus 4 orb seems to work, although it's hard to balance the phone.

Related

Nexus 7 Car Charger

I was just wondering if anyone here has spotted a Nexus 7 car charger? Does it not matter if it's not specifically made for the Nexus 7? I'm trying to find one to buy online and I'm having some troubles. First post here I think I came to the right place though. :laugh:
Silversub745 said:
I was just wondering if anyone here has spotted a Nexus 7 car charger? Does it not matter if it's not specifically made for the Nexus 7? I'm trying to find one to buy online and I'm having some troubles. First post here I think I came to the right place though. :laugh:
Click to expand...
Click to collapse
Clicked thanks on accident lol. Any USB car charger should work, but I would make sure you grap a 1 amp one just so it has enough output to charge the tablet at a decent rate.
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
vroomr4 said:
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
Click to expand...
Click to collapse
Heck, I didn't even know they had 2 amp ones.
vroomr4 said:
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
Click to expand...
Click to collapse
Yup, go with a 2Amp one. Most of the cigarette lighter usb chargers are 2.1A.
Avoid the cheap Chinese 2+Amp car chargers, they can be so badly made they cause enough interference to wipe out your FM radio.
/edit 1Amp will be fine but don't go lower, the N7 would likely burn it out.
FYI I tried a 5v 1a wall charger and my gnex7 said f u wouldn't take the charge. 2a or nothing I say
Sent from my Nexus 7 using xda app-developers app
Troute said:
Avoid the cheap Chinese 2+Amp car chargers, they can be so badly made they cause enough interference to wipe out your FM radio.
/edit 1Amp will be fine but don't go lower, the N7 would likely burn it out.
Click to expand...
Click to collapse
Do you already have the Nexus 7? If so, can you take a look at the charger and see if rated at 1A output and/or try to charge it with a charger that came with your phone?
I am just curious if it can actually charge with less than 2A. The charger listed in the Play Store outputs 2Amps and I thought most tablets require 2A to charge.
https://play.google.com/store/devic...sMSwyLDExMSwiZGV2aWNlLW5leHVzXzdfY2hhcmdlciJd
Fusion777 said:
FYI I tried a 5v 1a wall charger and my gnex7 said f u wouldn't take the charge. 2a or nothing I say
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for verifying.
gsrrr said:
Do you already have the Nexus 7? If so, can you take a look at the charger and see if rated at 1A output and/or try to charge it with a charger that came with your phone?
Thanks for verifying.
Click to expand...
Click to collapse
Still waiting, should only be a couple of days now though...
I know this is something most people never do...but if you read the manual for the Nexus 7 it says you can charge it on a standard USB port with the Nexus 7 in sleep mode (no doubt because the power draw is much less). Standard USB ports are typically .5A...sometimes less. I would say that's the actual minimum. For the fastest charging 2A is what you want though.
The ASUS charger that comes with the N7 is rated at 2A (10W). I tested an old BlackBerry 0.85A (~4W) micoUSB charger and it seemed to work fine and the N7 didn't complain though I didn't do any scientific tests against the charging rates.
The 0.5A (2.5W) chargers probably won't even charge the unit if you're actively using it.
Cheers,
Kermee
Kermee said:
The ASUS charger that comes with the N7 is rated at 2A (10W). I tested an old BlackBerry 0.85A (~4W) micoUSB charger and it seemed to work fine and the N7 didn't complain though I didn't do any scientific tests against the charging rates.
The 0.5A (2.5W) chargers probably won't even charge the unit if you're actively using it.
Cheers,
Kermee
Click to expand...
Click to collapse
Yeah...read my previous post...the manual says you can charge on a standard usb port (0.5A sometimes less) but only if the Nexus 7 is in sleep mode...ie you're not actively using it. If you can't charge it while connected to USB and it's in the sleep state...then your usb port is probably a low power USB port (<0.5A).
For those looking for a good backup battery charger for it...I recommend this one: http://www.amazon.com/gp/product/B005NGKR54/ref=oh_details_o05_s00_i00
works perfectly with my Nexus 7 (just make sure to use the correct USB out port on it as only one of them is 2A)
DealExtreme Charger
Saw this one on DealExtreme, even come with cable:
http://www.dealextreme.com/p/car-ci...-port-for-google-nexus-7-tablet-146751?item=8
Will be ordering will update when arrives. Also they're carrying Nexus 7 Cables in Pink, Green and Orange.
Was using a Sprint micro-USB plus charger (model PVX8823) with attached cable and standard USB port for 2nd device that I was using for my phone. Output is 0.65Amp which isn't sufficient and will slowly drain the N7 battery while in use. ~$35 at Sprint retail store. Wouldn't recommend for obvious reason.
Fortunately, had a spare Motorola SPN5400A 1Amp I bought with some screen protectors from Amazon because it was cheap like ~$5. 1Amp is sufficiently to maintain the charge while in use at near worse case running 3D games like Dead Trigger, Shadowngun, etc. So, 1Amp is minimum threshold.
You need a charger that:
1) Is capable of 2A (1.5A may be sufficient, 1A is a little too low)
2) Shorts D+ and D- together - This rules out most iPad chargers.
If it says it is made for iPod/iPad it will not work without modifications or adapters.
Samsung tablet chargers will work.
If you take an iPad charger, open it up, and short D+ and D- together, it will work.
dkhilo said:
Saw this one on DealExtreme, even come with cable:
Will be ordering will update when arrives. Also they're carrying Nexus 7 Cables in Pink, Green and Orange.
Click to expand...
Click to collapse
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
dcpuser said:
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
Click to expand...
Click to collapse
Most chargers for android phones will work. I use my HTC charger for ,mine and I bought a car charge that has the standard micro USB connector but also has another USB port so I can charge 2 devices at the same time with 1 charging unit. You droid razor charger will work just fine. You just need to locate a charger that is capable of charging 2 devices at the same time such as this one
http://www.amazon.com/GTMax-Metalic-Vehicle-Charger-Adapter/dp/B005X5L8PI
You'll be good to go with this.
Sent from my Nexus 7 using xda premium
dcpuser said:
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
Click to expand...
Click to collapse
Check out this oem charger from Sprint. Its a dual port charger with a 2a output and you dont have to worry about buying a knock off charger that may or may not perform as expected. It also can be used as a wall charger. Good price too....
http://www.ebay.com/itm/130712043019?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1459wt_1399
So are any of these confirmed 100% to work? the one a few links back (GTMax) says works with iphone, and I thougth that meant would NOT work with N7. So I am confused on what will work, and I am already on my 2nd Nexus7 being I blew out the USB trying a bunch of differnt chargers for the car.
I would like something that is small and can have multiple USB plugged in, but not a show stopper, just hope to find something on Amazon (Prefer Prime) so I can oder with my case today. Really want to use this in the car more (GPS\GoogleMusic..ect.), but with no power not a great option.
Thanks in Advance,
Drops
dkhilo said:
Saw this one on DealExtreme, even come with cable:
In for the orange so it will be easy to spot if misplaced. Thanks!
Click to expand...
Click to collapse

Charger Behaviour for Nexus 7 on Griffin Dual USB PowerJolt

I have this Griffin Dual USB PowerJolt Car Charger and its been working perfectly on all my devices, Playbook, Blackberry 9900, Samsung Galaxy S3, iPhone 3G, iPad 2 and many others but for some reason, this charger just don't want to work with my Nexus 7. I don't know why its so picky and wondering if you guys could help me identify the problem and preferably with a good working solution.
I tried opening it up and follow the advice from http://www.amazon.com/gp/customer-m...m_ciu_pdp_images_0?ie=UTF8&index=0&isremote=0. Both pins are already been soldered together but the Nexus still isn't charging!!
This makes me wonder where's the USB standard? How are some device / chargers so picky? What did the manufacturers do to prevent charging on other devices or charging through a non compatible charger?
- Charles
You may get flamed for this question because chargers have been discussed a LOT in this particular forum. It seems that none of the discussions show up on the first page at the moment.
Do some searching here for chargers but let me refer you to one of the better threads: http://forum.xda-developers.com/showthread.php?t=1791717
short/y said:
You may get flamed for this question because chargers have been discussed a LOT in this particular forum. It seems that none of the discussions show up on the first page at the moment.
Do some searching here for chargers but let me refer you to one of the better threads: http://forum.xda-developers.com/showthread.php?t=1791717
Click to expand...
Click to collapse
Thanks a lot. I did read up all the posting regarding the USB charging issue on the N7 but I still can't find the answers. I read about people having the Griffin PowerJolt and not able to charge their device.
After downloading the Battery Monitor Widget and plugging to my Griffin PowerJolt (short D+, D-), the device is charging (estimate: 384mA) but still not showing as charging. It shows Discharging and Unplugged. I don't think its the USB cable since the cable works on my PC.
So what causes this issue?
- Charles
Your answer is here http://forum.xda-developers.com/showthread.php?p=29983624#post29983624
It doesn't matter why, just that your Griffin does not do a good job of charging. If you want more either buy oem or any charger designed to work with Samsung, those devices should work better.
Troute said:
Your answer is here http://forum.xda-developers.com/showthread.php?p=29983624#post29983624
It doesn't matter why, just that your Griffin does not do a good job of charging. If you want more either buy oem or any charger designed to work with Samsung, those devices should work better.
Click to expand...
Click to collapse
I guess I still blame on the N7 for being so "picky" since the Griffin USB charger charges ALL devices, including iPad, Playbook, Samsung S3, iPhone and Blackberry but just not N7.
- Charles
chaddeus said:
I guess I still blame on the N7 for being so "picky" since the Griffin USB charger charges ALL devices, including iPad, Playbook, Samsung S3, iPhone and Blackberry but just not N7.
- Charles
Click to expand...
Click to collapse
Yep, the Nexus 7 is picky. No question about it. But your chargert *does* charge your Nexus 7, the Nexus just doesn't indicate it's charging.
Personally, I bought two KMASHI chargers from Amazon. It's a 5V 2A charger and it works great. Charges at greater than 1Ah and the N7 indicates it's charging. Won't charge an iPad but it works for me. The one I bought is http://www.amazon.com/gp/product/B008XQYH1G but it shows as unavailable now. I suspect the other KMASHI chargers will work the same, though.
short/y said:
Yep, the Nexus 7 is picky. No question about it. But your chargert *does* charge your Nexus 7, the Nexus just doesn't indicate it's charging.
Personally, I bought two KMASHI chargers from Amazon. It's a 5V 2A charger and it works great. Charges at greater than 1Ah and the N7 indicates it's charging. Won't charge an iPad but it works for me. The one I bought is http://www.amazon.com/gp/product/B008XQYH1G but it shows as unavailable now. I suspect the other KMASHI chargers will work the same, though.
Click to expand...
Click to collapse
It charges it but its slow. Being rated at 1A, its can only charge at 300mA+ so its rather disappointing plus the charging isn't consistent. Sometimes when I plug in, it will charge, sometimes not so its another disappointment. But I guess I quickly adapt it and don't bother too much now.
I can still use my in car Head Unit with a build in USB port. At least I am getting 400mA+ and it shows as charging so I am ok
- Charles
Ive been recommending this Sprint 2A dual usb charger to everyone. Its a OEM charger so you can expect a high quality product that works as it should and it puts out the required juice to rapidly charge the N7. It also has the added benefit of doubling as a wall charger. Ive had mines for about a week so I can confirm it does indeed work! http://www.ebay.com/itm/130712043019?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1459wt_1399
Hey All.. I looked forever to find a solution. The Targus 2A car charger has a small (3") adapter cable that comes with it purportedly for Galaxy Tab. That little cable with the data wires shorted on the device end allows the N7 to be charged from ANY 2A car charger. I'm using the adapter with a Scosche dual 2.1 Amp Car Charger
Adapter picture
Targus Charger
Edit: I just built a usb cable with the data wires shorted on the Nexus end (cut, strip, short micro usb end green and white, remake connections red to red and black to black, insulate splices individually, wrap all in electrical tape or heat shrink for strength and beauty) and it works with all chargers. Took about 20 minutes.

USB car charger

I have a few of the belkin/off brand dual USB auto adapters. But they all have output of around 500mA so basically when using bluetooth and GPS on the rd I'm drawing more power than I'm getting. I've looked around on amazon for some usb adapters but seems like a lot of them for some reason only really fast charge with IPads or other apple devices and for some reason they slow charge android devices. Apparently iphones have some sort of communications with the chargers to draw more power.
So my question is does anyone have one or know of one that works with the G2 and fast charges. I'd prefer one that is flush like my existing belkin and not one that sticks out a few inches. Dual ports would be nice, but at this point I'm not picky. Having said that, I'd like to not spend $30 on it.
To add to it, I installed some battery monitor widget and while in the car today I just popped it open and noticed that it said "USB Connected Discharging" So basically It actually drains power quicker than if it wasn't connected to the charger at all!
mims1979 said:
I have a few of the belkin/off brand dual USB auto adapters. But they all have output of around 500mA so basically when using bluetooth and GPS on the rd I'm drawing more power than I'm getting. I've looked around on amazon for some usb adapters but seems like a lot of them for some reason only really fast charge with IPads or other apple devices and for some reason they slow charge android devices. Apparently iphones have some sort of communications with the chargers to draw more power.
So my question is does anyone have one or know of one that works with the G2 and fast charges. I'd prefer one that is flush like my existing belkin and not one that sticks out a few inches. Dual ports would be nice, but at this point I'm not picky. Having said that, I'd like to not spend $30 on it.
Click to expand...
Click to collapse
There is a long thread on this already.
http://forum.xda-developers.com/showthread.php?t=2454301
It seems that the bigger issue is not finding a 2amp charger, but a USB cable with the correct gauge similar to the oem one. I believe the oem cable is 20 gauge and I believe I found one on Amazon.
http://www.amazon.com/gp/aw/cr/B009Z94PV2/ref=mw_dp_cr
I don't get why it's such a difficult thing to find? Doesn't LG make a car charger that charges it's own phone?
I use my older Motorola ones and they work fine. Not full 2 amp but I can stream iheartradio or Pandora and the phone will charge up still. But the screen is off, not like using GPS. Still would like a fast charger tho.
I have an Anker 24w 2 port charger and it charges my phone as fast as the wall charger. I tested it with a charger doctor and it does read 1.8a current flowing thru.
Sent from my LG-D802 using Tapatalk
I got a charger made by rocket dog I do believe for best buy best car charger I've ever had and it has an extra usb on the top
Sent from my LG-LS980 using xda app-developers app
It's not the charger that seems to be the problem. 2a Chargers can be had in many places. It seems a 20 gauge wire is the difference.
Here is a link to a post I made in another thread with a tested and working setup in my car
Cheap too.
http://forum.xda-developers.com/showpost.php?p=50053524&postcount=229
No, the problem is the op isn't using a charger designed for Android.

Wireless Charging Issues

Anyone able to reliably charge wirelessly? I have a few Qi pads and without carefully and meticulously placing it in just the right spot it won't charge. And even then it often toggles in and out of charging.
Any suggestions? Or a pad that will work reliably?
Thanks
-bc
Sent from my Nexus 6 using XDA Free mobile app
I have charged on Tylt Vu every night since I got it with no issues.
I put it on my TYLT every night now and its at 100% when I wake up. It does goes to 99% faster than when I charge it with my regular charger but I think that's just me.
couple of the threads on this in the accessories section.
OP should post up the pads he or she uses so others can compare.
i too have no issues charging wirelessly with two different model chargers.
marctronixx said:
couple of the threads on this in the accessories section.
OP should post up the pads he or she uses so others can compare.
i too have no issues charging wirelessly with two different model chargers.
Click to expand...
Click to collapse
You’re right. I have two different pads I’ve tried:
*
1.*******CHOETECH Qi Wireless Charger Pad – works almost never. Even with meticulous placement.
2.*******PowerBot® PB1020 Qi Enabled Wireless Charger Pad – works reliably with very careful placement.
*
I’m intrigued to try the TYLY Vu, just ordered a used one. Hoping this provides more reliable everyday use. I’d prefer to be able to just put the hone down before bed and be assured it will work every time.
Sent from my Nexus 6 using XDA Free mobile app
I ordered this fairly cheap Qi Wireless Charger Pad on eBay and it works perfectly.
http://www.ebay.com/itm/311142445315?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The tylt seems to be the best deal in terms of consistent docks. I have returned several different chargers and am using the tylt and choe stadium chargers..
My charger works fine, but stops supplying power once the device reaches 100%. I'll wake up with about 98% because of several hours of standby drain.
bc14nj said:
You’re right. I have two different pads I’ve tried:
2.*******PowerBot® PB1020 Qi Enabled Wireless Charger Pad – works reliably with very careful placement.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I have the powerBot and can confirm the same. Works reliably, but takes a bit of moving around to get it started. Once I get the solid blue light on it then I've never had an issue with the charge being incomplete.
Was also looking at tylt vu, might put it on my xmas list..
The Nokia DT-900 wireless charging plate I got from AT&T a few months ago for $5/ea works just fine.
i have the CHOE Stadium Qi Wireless Charger and it's working without issue. it even charges with my (thin) case on the phone.
slimc84 said:
The Nokia DT-900 wireless charging plate I got from AT&T a few months ago for $5/ea works just fine.
Click to expand...
Click to collapse
it works fine, but it turns the damn thing on 100% of the time. i don't want that. charges Nexus 5 just fine while it's off. for now i'm just using the turbo charger until i can figure out what the hell to do
With my nexus 6, I have had good luck with the itan ( a tylt vu knock off) http://www.amazon.com/gp/aw/d/B00LE6X5VU/ and tylt vu charger, also the 2012 original google wireless charger, but my other qi chargers do not work well, including two airdocks and the 2013 nexus wireless charger. It is more an issue of correct placement, than the qi technology per se. Qi works on the nexus 6, butit is harder to place the n6 correctly due to the two axis curved back plate, which has no flat part at all, so the small single coil chargers do not work as well as the larger triple coil chargers, like the itan or tylt vu or chose stadium.
Following back here, I have been using the Tylt Vu without flaw for a month of so here. It's very good at working with the 6 when I just put it down on it, no fiddling necessary ever.
Definitely recommend.
XxKINGxX2580 said:
I ordered this fairly cheap Qi Wireless Charger Pad on eBay and it works perfectly.
http://www.ebay.com/itm/311142445315?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I have what appears to be this exact unit, ordered here... http://www.ebay.com/itm/181694553032?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT in fact, I bought 3 of them at the same time (i wanted them for different locations that i am all day) and none of them work for some reason... i line my n6 up exactly, the light turns green for a second or 2, my phone shows that it's charging for less than a second and then the plate goes back to red again... i've tried all kinds of alignments, even disassembled one to see if there was too much space between the coil and the phone... it hasn't worked for more than a blip...
bc14nj said:
You’re right. I have two different pads I’ve tried:
*
1.*******CHOETECH Qi Wireless Charger Pad – works almost never. Even with meticulous placement.
2.*******PowerBot® PB1020 Qi Enabled Wireless Charger Pad – works reliably with very careful placement.
*
I’m intrigued to try the TYLY Vu, just ordered a used one. Hoping this provides more reliable everyday use. I’d prefer to be able to just put the hone down before bed and be assured it will work every time.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I have the CHOE triple coil QI and I have had no issues charging my Nexus 6. It even charges through my INCIPIO rubber case.
Using a Nokia as we speak, never had a problem. That being said you have to realize that the charging coil is off center in this phone, approzimately 1/3 of the way up from the bottom, I assume to facilitate the use of chargers designed for smaller phones. This can cause a charging problem for those that don't position the phone correctly over the centered charging spot on the charger. Remember that and all chargers should work on the N6 as well as they work on any other Qi phone.
Using a vzw 3 coil. only thing I've noticed is that sometimes it doesn't start charging. I usually unplug the pin connector, wait a few seconds, them plug it back in and its always been full in the morning.
Qi Powerbot
I have a Nexus 6 and using the Powerbot PB1020. It works very well, connects easily, charges fast, not much heat but when it finishes it cuts the powerbot off and will not charge again until I unplug and re-plug the powerbot. This is not a huge deal but I would like to see myself never touching the plug again. Case in point, my elderly parents are very interested in Qi charging as they have a hard time seeing the plug on the phone and would benefit greatly from total Qi charging. However, if they have to unplug and replug the powerbot every night to reset it, then it seems a waste of money. Any others having this issue? Is it only on the Powerbot? DO all of the chargers do this? Any advice would be appreciated! Thanks,
Rob
xrobwx71 said:
I have a Nexus 6 and using the Powerbot PB1020. It works very well, connects easily, charges fast, not much heat but when it finishes it cuts the powerbot off and will not charge again until I unplug and re-plug the powerbot. This is not a huge deal but I would like to see myself never touching the plug again. Case in point, my elderly parents are very interested in Qi charging as they have a hard time seeing the plug on the phone and would benefit greatly from total Qi charging. However, if they have to unplug and replug the powerbot every night to reset it, then it seems a waste of money. Any others having this issue? Is it only on the Powerbot? DO all of the chargers do this? Any advice would be appreciated! Thanks,
Rob
Click to expand...
Click to collapse
i have a samsung wireless charger($50), and it never cuts off the charger or "stops" charging.

[Q] Troubleshooting Wireless Charging w/ Droid Turbo

About a week ago I used a match to singe the nylon that was fraying as it was bad and I was past the 2 week return policy from Verizon. Ever since then my wireless charging has not functioned properly. I had two different chargers. The first one was a Keedox stand and the second was the PowerBot
So I was using the keedox charger but after awhile it would just randomly disconnect and the phone would say detected wireless charger starting charge. I tried the Powerbot charger and it went all the way through no issues with the screen turning back on constantly. Well now the Powerbot is doing the same thing the first one did. I left it on the mat last night but when I woke up it was only at 50% and had stopped charging. I use an app called battery widget and it showed me around 60% it just stopped and starting discharging. I already returned the Keedox one assuming it was defective but now this leads me to think its a problem with the phone. Could the receiver coil in my phone be bad and causing issues with the wireless chargers?
frankthetank3 said:
About a week ago I used a match to singe the nylon that was fraying as it was bad and I was past the 2 week return policy from Verizon. Ever since then my wireless charging has not functioned properly. I had two different chargers. The first one was a Keedox stand and the second was the PowerBot
So I was using the keedox charger but after awhile it would just randomly disconnect and the phone would say detected wireless charger starting charge. I tried the Powerbot charger and it went all the way through no issues with the screen turning back on constantly. Well now the Powerbot is doing the same thing the first one did. I left it on the mat last night but when I woke up it was only at 50% and had stopped charging. I use an app called battery widget and it showed me around 60% it just stopped and starting discharging. I already returned the Keedox one assuming it was defective but now this leads me to think its a problem with the phone. Could the receiver coil in my phone be bad and causing issues with the wireless chargers?
Click to expand...
Click to collapse
I've never been able to get my $15 Powebot (the small circular one) to work well with my Turbo
I saw s video on the Nexus 6 and showing how hard it was to exactly position it for wireless charging. Our Turbos could be having the same issue. Lack of magnet and small sensor.
Sent from my Turbo.
my single coil qi charger was a pain with the turbo. i have the itian a6 and it works great everytime
http://www.amazon.com/Itian-Standard-Wireless-Charging--Shipping/dp/B00LFVPQS4/ref=sr_1_3?ie=UTF8&qid=1417822843&sr=8-3&keywords=Itian+A6
lunchboxrts said:
my single coil qi charger was a pain with the turbo. i have the itian a6 and it works great everytime
http://www.amazon.com/Itian-Standar...=UTF8&qid=1417822843&sr=8-3&keywords=Itian+A6
Click to expand...
Click to collapse
Looks just like the Vu, if its the same quality then it's Def a good Qi charger...
jasoraso said:
I've never been able to get my $15 Powebot (the small circular one) to work well with my Turbo
Click to expand...
Click to collapse
I have the same problem with the Powerbot. I have a feeling it might be the rubber around the edge not letting the phone get close enough to the coil. it works perfectly to charge my Nexus 7 and Moto 360 though, so it might just be the Droid.
For the record. the Aukey Wirless Charging Station is by far the best charger for all my devices. Droid turbo works great in portrait or landscape
DaemonAshra said:
I have the same problem with the Powerbot. I have a feeling it might be the rubber around the edge not letting the phone get close enough to the coil. it works perfectly to charge my Nexus 7 and Moto 360 though, so it might just be the Droid.
Click to expand...
Click to collapse
But is it possible exposure to alot of heat could have harmed the wireless charger to the point where it no longer functions? That was my other concern. Im not sure how the receiving coil is in the phone.
frankthetank3 said:
But is it possible exposure to alot of heat could have harmed the wireless charger to the point where it no longer functions? That was my other concern. Im not sure how the receiving coil is in the phone.
Click to expand...
Click to collapse
My phone won't charge on my PowerBot, but I have 2 Nokia chargers that work excellently with the Turbo. The Powerbot charger works fine with my Moto 360.
I believe the Nokia charges have 3 coils in them, so it is really easy to get a decent placement of the phone on the charger.
I think the powerbot is a single coil charger, and placement is really critical. I think I've been able to get the Turbo to charge before, but only after playing around forever with placement. The distance from the charger to the phone shouldn't be so sensitive that the rubber on the charger would keep it from charging.
sensor size
just my opinion, but compared to the last phone i had, I feel like the turbo has a very small sweet spot to actually charge clean.
still love the phone, it's awesome. The huge battery has had me slowly not being always worried about finding a charger all day. My battery ptsd is going away!
just my 2 cents..
Has anyone had a good experience w/the powerbot? I already put two on my Christmas list
Is it just finicky, or doesn't work at all?
Though if the Moto 360 charges ok on it I can still use it for that I suppose.
impala454 said:
Has anyone had a good experience w/the powerbot? I already put two on my Christmas list
Is it just finicky, or doesn't work at all?
Though if the Moto 360 charges ok on it I can still use it for that I suppose.
Click to expand...
Click to collapse
I keep one at work and it worked fine with my S3 (with receiver pad). The turbo needs to be o it 'just right' to work. I could live without the beep, but whatever.
I would buy another if I needed to ..

Categories

Resources