Related
Please delete this post
Smallsmx3 said:
flashed back to jf6 via one click twice now. master cleared..... everytime i try to boot into recovery i get into 2e. dont flame me just help. anyone else have this issue before?
Click to expand...
Click to collapse
Did you put the update.zip on your internal SD card? If not I have attached it to this post. Please be careful in the future where you post though. There are a few bad apples that will rip you apart.
More info is needed to help you out. What setup where you running before?? Do you have the correct update.zip for CWM on the root of your sd and are you reinstalling packages x2 in 2e recovery and its not working or what?? Pretty vague in the OP.
EDIT: If you master cleared it wiped your sd and you need to put the update.zip that adamholden posted back on your sd.
whats the update.zip file? root access? I have root. everyone knows if you post in general you dont get replies.....
The update.zip that he posted is not root. Its for CWM and you should always keep it on your internal sd to always have CWM available. Just move the zip to your SD and select reinstall packages two times for the green txt CWM recovery.
was on eugenes gingerbread themed rom... going from r2 to r3....failed at line 2 so I one clicked....master cleared and everytime i try to get into CWM recovery 2e boots up instead.....i have root
silverslotcar said:
The update.zip that he posted is not root. Its for CWM and you should always keep it on your internal sd to always have CWM available. Just move the zip to your SD and select reinstall packages two times for the green txt CWM recovery.
Click to expand...
Click to collapse
i didnt know this existed....thanks...ill try it out
Smallsmx3 said:
whats the update.zip file? root access? I have root. everyone knows if you post in general you dont get replies.....
Click to expand...
Click to collapse
CWM is an update.zip file on your sdcard (assuming your not using a kernel with it baked in). What happens when you hit reinstall packages, is that it takes the CWM update.zip and flashes it, replacing 2e with CWM. If you don't have that update.zip on your sdcard, then you won't be able to get to CWM.
Yea, have you ever been in rom manager and had to "Flash Clockwork Recovery." Well thats what it is doing. Its putting CWM recovery as an update.zip on your sd. You should be good to go once you do that.
I had the same thing happen to me. I will list what I did step by step as best as I can remember not because all of it is necessarily relevant, just for a frame of reference:
i. Odin 1 clicked to stock
ii. one click root
iii. installed CWM from market
1. Opened CWM, selected install rom from SD card, did not check backup rom or wipe data.
2. Phone rebooted into stock recovery screen, selected reinstall packages, rebooted phone.
3. Repeated step 1 and 2 about 10 times with nothing happening. (Normally, the second time I go through this process, it installs the rom)
4. I tried selecting "Reboot into Recovery" (the manual option) but still nothing happened, it was taking me to the 2e stock recovery.
5. I went back into CWM and selected "All CWM Recoveries" and flashed the older version 2.5.1.1
5. Selected "Reboot into Recovery" again and the CWM recovery window came up and I was able to manually select my ROM from there.
Thanks for Clockwork Mod save
Thank you!!!! Like the previous poster I couldn't get into Clockwork to flash a new ROM altho' I went into recovery at least a dozen times - your fix worked! I downloaded an earlier Clockwork and that instantly took me to the correct screen. A million thanks, I thought I would be stuck in 2.1 for the life of the phone since it wouldn't flash.
dslsurfer said:
Thank you!!!! Like the previous poster I couldn't get into Clockwork to flash a new ROM altho' I went into recovery at least a dozen times - your fix worked! I downloaded an earlier Clockwork and that instantly took me to the correct screen. A million thanks, I thought I would be stuck in 2.1 for the life of the phone since it wouldn't flash.
Click to expand...
Click to collapse
Glad that you found a fix haha
I attempted to put Phiremod onto my NC, but I formatted the boot partition so it doesn't start up. What's the easiest way to get my Nook going again?
Try using a CWR SD Card, and either flashing a nightly zip, or one of the U-Boot files floating around.
I think I just need to flash a proper boot file, which should I try for either CM7 or Phiremod?
Can anyone help me out? The sticky seems a bit outdated or maybe it's just confusing me.
I have a 2GB uSD card and I just want to try out Phiremod and the stable CM7 to see which I prefer. Do I have really have to restore to stock just to overwrite it again?
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Follow sticky carefully, it works.
Sent from my NookColor using Tapatalk
thereddog said:
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Click to expand...
Click to collapse
Do the 8 re-boot step. There is also a boot fix zip file or recovery zip file you can flash via your CWM SD.
I flashed the 3.2.0.8 recovery zip, but it still doesn't boot
Download this to your CWM sd card. And this. Then put in your CWM sd card, boot it up, flash the update_nc_stock_1.2.zip file, then ManualNooter. Take out the sd card and reboot. Should have stock + root.
Thank you, but I don't even want to use the B&N software. Either CM7 or Phiremod.
Can't I just repair the boot partition?
I went ahead and flashed the update-nc-stock-1.2-signed.zip then manual nooter
Took the card out and rebooted, nothing happens
Did you reboot? What do you see?
Nothing, screen doesn't come on
Help please!
Oh. Have your tried flashing this?
Where did you find that on the CM site? All I found under Nook Color were the 'update' zips
Downloading now
Ahh, it's a nightly CM7 build... I assume that it will completely format the EMMC?
Downloaded and flashed the latest nightly zip, still won't boot.........
Anyone else have any ideas I could try?
Perhaps I missed where you said you did it, but go back and take the Nook completely back to stock. I umderstand that you said you don't want to use to stock software at all, but you need to get it back to factory so you can at least boot the device.
Once you've done that, go ahead and follow the directions TO THE LETTER to load your CM7 or Phiremod.
Cliffs Notes: Trying to repair something when you can't even boot is a bit silly. Just start from square one and root. Enjoy!
So I somehow I accidentally flashed a wrong recovery image on my Note when trying to fix my internal storage not mounting. I have lost the ability to flash .zip files since this build of clockworkmod is 4.x.x. or something. Is there a way to revert back to 5.x.x. Is there a recovery.img I can download somewhere ? Thanks
Get CF root kernel, it will push latest version of CWM
find it from first link on my signature
perfect! Thanks
My brother has a Galaxy Ace(As do I) and he was wanting to put a rom on it, so I showed him a few tutorials on xda and helped him through the process. I myself don't have a rom on my phone, but I spent a good half month trying to fix my phone after my friend convinced me to flash a rom designed for the S3...Yeah, bad mistake...
So in all the tutorials they say to just put it on your sd-card and then flash it from recovery and etc. So we tried that and it ended up not working(At least it seemed like it didn't, I know you are supposed to wait 10 or so minutes to see if it gets out of the boot loop, and we waited about 20 mins) so I just reflashed a stock rom using Odin and everything was fine.
But it got me thinking, is there a specific location you should be putting the file on when you flash it? Because it was just on the external SD-Card, not the internal SD-card, is that a problem?
Also, is CWM Recovery required, or is it just to prevent you from needing to reflash a stock rom after you screw up?
Still kind of a noob when it comes to this stuff, thanks in advance =)
Put the file on the root of your external micro SD card, not inside any folder, not in internal memory, just on sd card [ sd/*here* ]......
Some ROM can't be flashed via phones recovery, they do need CWM Recovery + CWM recovery (backing up the data) help you to save your phone's data if anything goes wrong
Don't forget to hit the thanks button if I helped
Vía xÐÆ Øffíçíal™
I have tried to boot in recovery to flash Xposed SDK only to find the phone is doing a proper reboot, even when using NDR and selecting reboot to recovery and when I hold the volume down and the Sony logo, nothing works,. I have tries using NUT's installer to add it again, although it finishes successfully the recovery isn't there, I am not bothered about flashing or wiping if I have to, but is there any other way first? Its all started when my phone won't recognise my SD Card, unless I remove it and put it back in and then on reboot its missing the card again.
Same problem
I have the same problem but do not have a computer. I was reading about it and found that after you flash a new ROM before booting it up, you have to flash recovery (especially NUTs Dual recovery) and then boot. It is weird since most ROMS have a preinstalled recovery and I do not get why we have to do this. I keep losing recovery after flashing a new ROM and will try to flash CWM. NUTs dual recovery keeps getting lost for me. I will borrow a friends laptop and get it done over the weekend.
FCArsenal said:
I have the same problem but do not have a computer. I was reading about it and found that after you flash a new ROM before booting it up, you have to flash recovery (especially NUTs Dual recovery) and then boot. It is weird since most ROMS have a preinstalled recovery and I do not get why we have to do this. I keep losing recovery after flashing a new ROM and will try to flash CWM. NUTs dual recovery keeps getting lost for me. I will borrow a friends laptop and get it done over the weekend.
Click to expand...
Click to collapse
I've never had the problem before and I have flashed this handset a few times, recovery should have went on when I flashed the pre-rooted rom as I created my own, but doesn't matter as I have already tried to put the recovery back on. I will however try another recovery.
flash recovery without PC?
Do you know anything about flashing a recovery without a PC? I have an idea but do not wanna test it without a PC at hand. What if I extract the recovery.img file and put it on my internal SD and boot the phone? Will it install the recovery? If you know of any other way please let me know
FCArsenal said:
Do you know anything about flashing a recovery without a PC? I have an idea but do not wanna test it without a PC at hand. What if I extract the recovery.img file and put it on my internal SD and boot the phone? Will it install the recovery? If you know of any other way please let me know
Click to expand...
Click to collapse
I'm sorry phone software is not my speciality, I am new to this whole flashing and recovery on phones. I really wish I could help you. However can I ask you if there is now way you can get into recovery, how can you flash it from within the phone, can the phone read img files?