I have tried it with 2 different Note 4s and both would not let me see who is calling me on the car dashboard screen.
I have 2013 Toyota Prius Package 3, and I think I have tried everything to make it work.
I paired it to the car, allowed messages and contacts to be displayed when the phone asked for it, and all the incoming calls still display as "unknown". I can see my contacts on the car screen when I click on the contacts tab, and I can use the voice command and dial people in my contact list.
My wife iPhone 6 does work, and show the contact name when someone calls.
Related
Have a bit of a strange issue with the galaxy S I9000 and also the I9100.
I always connect to my car using the rSAP bluetooth profile, the first time I connect to the car I enter the 16 digit code and set the device to trusted when a notification message pops up, a minute or so later I get a notification about a phonebook request, I accept this and I get the phonebook transferred to the car.
For the first 3 times of getting in and out of the car I get the phonebook, missed, dialled and received calls. Then after that it will not transfer the phonebook, I can tell it's failed as I go into the memory and look at the imported contacts and it's 0, usually I have about 190 contacts.
It will only transfer the phonebook if I reboot the phone, then I get another three transfers of the phonebook and then it fails again.
The car I have is an Audi A7 with MMI 3G+, but this was also the case with a Q7 with MMI 3G, both times I used rSAP mode for the call quality and SMS facilities.
I think it's something to do with the pBAP requests, but I'm not sure what.
I might check in HFP mode if the issue remains.
I recently updated my GNote to XLA1, Modem XLA1 from KK5, still rooted and all apps and settings restored using Titanium Pro.
Now when I receive a text message, over my BT headset I now hear the senders telephone number being read out loud followed by the senders name (obviuosly reading this from my contacts list) and then the message is read out loud as well,
"message from one billion, five hundred and sixteen thousand (1-516- and so on). George Jetson "message contents"".
all over my BT headset.
Over the loudspeaker I hear the text message ring tone.
I have not made any changes to any settings yet now this one billion.... nonsense occurs.
Anyone encouter this and have any suggestions?
Actually I would also like to know how to turn off reading the message out loud over my headset or speaker as well.
I have removed the checkmark at Settings>Accessibility.
Voice recognition is set to Samsung powered by Vlingo.
Driving mode is off under settings>voice input and output>voice output>Text to speech settings
Thanks,
Claude H.
My Setup: LG G5 with Urbane 2nd Edition -
I am unable to get have any text messaging notifications or phone call ability when I am at home. calls and texts ring on phone, and watch sits there no response. I get that it is cellular signal issues, but my phone works fine and there isn't any kind of Bluetooth connection between them that I can tell.
I came from a Galaxy Gear S2, and in the basement when phone would get a call or text, they'd show up just fine on the watch. Not with my new LG G5 and Urbane 2nd edition.
The S2 would work as a Bluetooth external mic and speaker basically, so it didn't rely on the data connectivity for this functionality. Any idea if the Android Wear Urbane 2 can do it?
I'm also working on getting a Microcell from AT&T -
Here is troubleshooting I have performed in get this working:
Factory Reset Watch -
Removed Bluetooth Pairing from Phone -
Uninstalled/Reinstalled Android Wear -
That did nothing, still remembers watch -
"Forget Watch" in Android Wear -
100% from scratch redid "Pair with your watch" process now that both watch and phone have been system updated -
Set to ignore Optimizations while setting up the "Always be connected" options -
Set Screen Always on to OFF -
Started Syncing 21 apps back process automatically -
Successfully reactivated AT&T Number Sync as factory reset sent me a text it disabled -
Verified apps aren't in the blocked notification list -
~~
STILL cannot get text notifications or calls on it when at home -
The other problem I have found with this is my Bluetooth does not have a call or media audio profile option.
Everything else, my car, headset, Gear S2's etc, show "Call" and "Media Audio" profiles in the Bluetooth sync menu for that device.
This Watch only shows Change Watch name and Unpair.
I've read people saying that the Cellular Urbane should be like "Do you want to use watch or phone to place call"
theratdude64 said:
The other problem I have found with this is my Bluetooth does not have a call or media audio profile option.
Everything else, my car, headset, Gear S2's etc, show "Call" and "Media Audio" profiles in the Bluetooth sync menu for that device.
This Watch only shows Change Watch name and Unpair.
I've read people saying that the Cellular Urbane should be like "Do you want to use watch or phone to place call"
Click to expand...
Click to collapse
I believe it works this way when numbersync isn't activated. I don't have AT&T so I don't have the numbersync option. Without numbersync, I have an option in my bluetooth settings on the watch for "play phone audio on watch". When paired by bluetooth I have the option to call with phone or watch. I have to use the call forwarding option when I leave the phone behind to get calls to the phone to be sent to the watch.
hm, I tried disabling the Number Sync and re-pairing but it doesn't change the bluetooth profile.
Perhaps it is just AT&T Models don't have it
This thread here confirms that An Urbane 2nd edition should ask "Watch or Phone" when making a call
https://productforums.google.com/forum/m/#!msg/android-wear/v5-gJCTwa3w/VO_ap8b_AQAJ
I see where it specifies watch calling but it never asks which I wanna use
theratdude64 said:
hm, I tried disabling the Number Sync and re-pairing but it doesn't change the bluetooth profile.
Perhaps it is just AT&T Models don't have it
This thread here confirms that An Urbane 2nd edition should ask "Watch or Phone" when making a call
https://productforums.google.com/forum/m/#!msg/android-wear/v5-gJCTwa3w/VO_ap8b_AQAJ
I see where it specifies watch calling but it never asks which I wanna use
Click to expand...
Click to collapse
I have the AT&T model. I just don't use AT&T service. I have the option under bluetooth settings on the watch to 'play phone audio on watch'. I believe you have to turn off numbersync in the watch settings and not just through AT&T. Is there a setting on the watch under settings>cellular>number sync.... to deactivate it?
mward1995 said:
I have the AT&T model. I just don't use AT&T service. I have the option under bluetooth settings on the watch to 'play phone audio on watch'. I believe you have to turn off numbersync in the watch settings and not just through AT&T. Is there a setting on the watch under settings>cellular>number sync.... to deactivate it?
Click to expand...
Click to collapse
Hi there you need to make sure that you uncheck the options to share number with phone for calls and also texts, you will then have the option to 'pay audio on watch' under bluetooth settings, this was it will notify you of call on watch and phone (much like a standard non LTE/3G wear watch
Anyone else have this issue?
I get calendar , messages by text and email card notifications and it will vibrate my watch. If I get a phone call my phone will ring and\or vibrate but my watch will not vibrate nor show an incoming call.
I'm having the same issue with my zenwatch 2. Everything goes to my watch except calls. Never shows me who's calling.
c_86 said:
I'm having the same issue with my zenwatch 2. Everything goes to my watch except calls. Never shows me who's calling.
Click to expand...
Click to collapse
I'll have to hook my ZW2 to my phone and test this myself.
Check whether "Phone audio" is enabled in phone's Bluetooth settings for paired watch.
Although this option should be checked only in case you want to use built-in speaker of watch (if it has one).
Did any of you guys set your phone up by NFC? There's a known issue, need too set it to manually.
I pair mine manually all the time. Never one used nfc to pair.
Hi, while I am connected to the AA with USB I don't see my phone contacts. There are only Favorites and recent calls.
If I use voice command /Call .../ it works only with the listed contacts.
Is this normal?
lazarus18 said:
Hi, while I am connected to the AA with USB I don't see my phone contacts. There are only Favorites and recent calls.
If I use voice command /Call .../ it works only with the listed contacts.
Is this normal?
Click to expand...
Click to collapse
The first part is normal I think (not in my car right now). AA is designed to restrict the user from any significant scrolling through text in an effort to keep your eyes on the road. I find it leads me to become frustrated and I wind up picking up the phone at stoplights to do stuff manually, but that's another issue...
The latter part is not normal, if I understand you correctly; you should be able to hit the mic button. Then say "call Joe Blow" and if that person exists in your contacts with a phone number it should proceed or offer you a choice of the numbers that you have for that person.
Sent from my ONEPLUS A3000 using Tapatalk
Thank you. Maybe that's the reason.
After I reinstalled AA now I can use Call <name> function.
Does anyone knows how can I listen music from external USB device using the AA?