i was trying to downgrade from revolt rom (kit kat 4.4.4) to sweet rom (jb) 4.1.2
so i flashed philz kernal so that i could install the rom
after that i wiped every thing and installed the rom
then once its booted up it stuck in setup menu
then i installed speedmod kernal
and rebooted system, then a black screen appeared and also no recovery
i went to download mod then i found this
custom binary download : yes (2 counts)
current binary: custom
and also a yellow triangle appears if i tried to boot up the sevise
please tell me what to do or refer to any helpful topic
my devise is gt-n7000
7esain said:
i was trying to downgrade from revolt rom (kit kat 4.4.4) to sweet rom (jb) 4.1.2
so i flashed philz kernal so that i could install the rom
after that i wiped every thing and installed the rom
then once its booted up it stuck in setup menu
then i installed speedmod kernal
and rebooted system, then a black screen appeared and also no recovery
i went to download mod then i found this
custom binary download : yes (2 counts)
current binary: custom
and also a yellow triangle appears if i tried to boot up the sevise
please tell me what to do or refer to any helpful topic
my devise is gt-n7000
Click to expand...
Click to collapse
For now ignore the yellow triangle and try to get the phone up and running. Flash Philz kernel again. Boot into recovery and and wipe data cache and system, preload. The go to download mode and flash a stock rom.
Related
HELP please!
I was on Rocket rom V3 (LPY), flashed abyss 4.2, rebooted into new recovery, 3 wipes, then installed Alliance, and now the phone gets stuck at the Galaxy Note boot screen. Tried rebooting and going into recovery to factory reset, and tried reinstalling Alliance rom via recovery, but still gets stuck at galaxy note boot screen.
Strange thing is - when I reboot into recovery, it's still abyss recovery! Shouldn't there be a new alliance recovery??
octavian90 said:
HELP please!
I was on Rocket rom V3 (LPY), flashed abyss 4.2, rebooted into new recovery, 3 wipes, then installed Alliance, and now the phone gets stuck at the Galaxy Note boot screen. Tried rebooting and going into recovery to factory reset, and tried reinstalling Alliance rom via recovery, but still gets stuck at galaxy note boot screen.
Strange thing is - when I reboot into recovery, it's still abyss recovery! Shouldn't there be a new alliance recovery??
Click to expand...
Click to collapse
Update: I tried installing speedmod kernel via abyss, but the Phone still stucks on boot screen - was there a problem with my Alliance rom download file?? What should I do?? I have a copy of Rocket rom V3 on my phone, should I just reinstall that?
Can you flash stock gb via Odin reroot then try again always good practice to return to stock gb when things start to play up
yes you should use odin and revert back to gb 1st.. refer alliance rom thread and follow the installation steps carefully..
[Alliance Rom]
try this
get back to gb via odin as described by dr. ketan see hiz forum and then follow simple odin steps as mentioned by robbie hood in hiz alliance rom forum. Thats all no need to flash any abyss kernel.
octavian90 said:
HELP please!
I was on Rocket rom V3 (LPY), flashed abyss 4.2, rebooted into new recovery, 3 wipes, then installed Alliance, and now the phone gets stuck at the Galaxy Note boot screen. Tried rebooting and going into recovery to factory reset, and tried reinstalling Alliance rom via recovery, but still gets stuck at galaxy note boot screen.
Strange thing is - when I reboot into recovery, it's still abyss recovery! Shouldn't there be a new alliance recovery??
Click to expand...
Click to collapse
If you are not goin to follow the guide by robbie,You are goin to face face problems in future with RW permissions when using alliance ota.So just follow the guide to the core.
I dont understand how ppl skip the OP and read a wrong method to flash which is posted after 4-5 pages...Remember,Always the dev hows the situation and always stick on to their guide.
I tried following the steps indicated in this thread http://forum.xda-developers.com/showthread.php?t=1424997. I was able to successfully flash the ROM N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2---Download--Philippines (Smart) . I was already on the last part where the phone should reboot and would install some applications but the phone is just stuck on the Samsung logo screen. I waited for almost 2 hours already. I tried taking out the battery and rebooting the phone but its still stuck in the Samsung logo. The Volume down+home+power key is still working as well as the volume up+home+power key. I don't want to take another step because I'm afraid of my phone getting bricked.
I previously had a Jellybean custom ROM installed but don't like it since S-Pen features aren't working.
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
You need a factory reset but 4.0.4 is not a safe kernel, that's why you need Philz kernel.
If you want a full stock ROM with kernel (like I need to send for warranty repair),
flash any GB stock rom appropriate for you, (still hang at samsung logo),
factory reset on recovery and update using kies to 4.0.4
nokiamodeln91 said:
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
Click to expand...
Click to collapse
Follow him not one above me
Sent from my GT-N7000 using Tapatalk 2
Stuck at Samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
Click to expand...
Click to collapse
if you are using N7000 then siyah kernel is not meant for this device as yet.
try to philz kernel if you can access recovery and then try to flash alliance rom.
or simply flash stock rom accessing the download mode.
Well this is what I did from day first
1 flashed android 4.3 through mobile Odin wifi didint work
2flashed it through desktop odin got stuck at boot logo
3 tried to flash to stock 4.1.2 using kies emergency method it triggerd the flag of knox
4 was hopeless for some time then flashed philz recovery and tried to wipe data etc with no use
5 flashed TGP 11.30 USING philz but no signals imei and baseband
6 various tries between 4.3 and TGP (for imei)(no efs back up)
7flashed a modem and persus kenerl(something like that finally got back imei etc)
8made a cwm backup + efs backup
9tried android 4.3 again after triangles away with no effect I.e still stucks at boot logo
10restored philz recovery and the factorg reset etc then restore cwm backup
11sucessfuly flashed a stock 4.1.2 rom using mobile odin + ever root method for root
12tried 4.3 stock rom failed again
13rpeated step and flashed 4.1.2 stock rom using mobile odin on Tgp 11.30
14flashed philz recovery made new cwm backup
15Now currently on a 4.1.2 stock rom with knox bootloader and persus kenerl and philz recovery I get stuck at boot logo when ever I flash 4.3 also tried alianve rom v2 but still stuck at boot logo
Can someone help
Also notuced that I have unknown Csc when I dial *#1234#
Well I have ruined almost 3-4 whole days in it now I am quitting for the moment until 4.3 arrives and will try to restore using kies emergency frimware restore if anybody has a good sol or an idea pls do help also can some one provide me any edited 4.1.2 rom with deleated bootloader
finally got it working
Flashed a 3 part odin frimware of 4.1.2
then tried 4.3 againg didnt work
http://forum.xda-developers.com/showthread.php?t=2023527
Then flashed 4.1.2 again
Flashed latest version of philz recovery
wipe date system .... everything from mount and storage and flashed alliance rom 2.3 which somehow worked
and Flashed 4.3 stock rom via odin which also worked
wipe date system .... everything from mount and storage
faqs and guides dead simple
JJEgan said:
wipe date system .... everything from mount and storage
faqs and guides dead simple
Click to expand...
Click to collapse
Id been using s1 i9000 but i never needed to format anything from mount and storage
Also what is the partition tombstones?(In my opinion the latest version of philz with option of formating tombstones was the real solution )
After upgrading to 4.3 via kies i m stuck on boot logo.
When i entered recovery mode there was a fallen android with a red triangle
Factory reseted still the same.
Tried many odin 4.3 roms (stuck at boot logo again)
Flashed a custom recovery twrp which flaggd knox and flashed alliance rom 4.3 (still stuck at boot logo)
Flashed boffela kenerl (still stuck)
Flashed a 4.1 custom rom
It worked but no imei did a efs restore nothing happened
flashed persus kenerl (imei and signals back)
Lastly used 4.1.2 for some time
tried to upgrade to 4.3 again (stucks at boot logo)
flahed twrp some how i cant wipe data and encryptions says unknown file system
Now using 4.1.2 alliance rom 1.3 (Note all stock 4.1.2 roms work but every custom rom like cm,omni rom, miui dont work i.e they stuck at boot logo too and already tried factory reset)
I have 2 questions
what does fallen android with a red triangle in recovery mode mean ?
Also what about the twrp issue?
Any help will be appriciated
Flash stock ROM with Odin.
Wipe the **** in Sammy recovery and it should boot up.
Sent from my GT-I9305 using xda app-developers app
toeterbaas said:
Flash stock ROM with Odin.
Wipe the **** in Sammy recovery and it should boot up.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Did not work but finally got it working
Flashed a 3 part odin frimware of 4.1.2
then tried 4.3 againg didnt work
http://forum.xda-developers.com/showthread.php?t=2023527
Then flashed 4.1.2 again
Flashed latest version of philz recovery
wipe date system .... everything from mount and storage and flashed alliance rom 2.3 which somehow worked
and Flashed 4.3 stock rom via odin which also worked
I have a galaxy note n7000 international version 16gb running on jelly bean 4.1.2 ddlsc
I downloaded nightowl cm12 lollipop and flashed it via cwm which was a package of philz touch recovery and root.
I installed it via stock recovery.
When i got into philz touch cwm ddlsc it was giving me status 7 error whenever i tried to flash the rom
So i updated cwm with philz touch XXLTA kernel then it flashed in one go and it booted to cm12 rom.
It was working fine but then i switched off and switched on again it was behaving abnormally and random poweroff.
Then i went into the cwm recovery and wipe data, wipe cache
Then went into download mode and flashed the official 4.1.2 ddlsc rom but i couldnt pass the samsung logo.
Then i booted into stock recovery and wipe data and factory reset again then then device never passed the
Samsung galaxy note gt-n7000 screen,from there it turned off.
I went to samsung,they tried 4 times flashing the official rom but all they could do is
OPTIMISING APPS>STARTING APPS>FINISHING BOOT and again power off and battery appeared.
Then they said that its motherboard failure.
Then i came home,somehow managed to flash revovery by flashing speedmod jb kernel.
Then i started hg42's partition scanner from start to end i.e. from 0 to 16 and passed succesfully
So i dint run end to start or 16 to 0 becoz the first one passed successfuly.
Now i am confused if there is no emmc brick then what is the problem.
Please someone help me,i dint want spend 8000 INR or 130$/
PLEASE HELP AND GUIDE ME TO THE RESCUE. THANKS