Related
Hi guys,
I have some minor scratches on my screen (2 to be exact ), but I was wondering, when I buy a new front cover, does that also include some kind of plastic window? Or are HTC's touched by the LCD itself and do you need a new screen when you have sratches?
Please enlighten me
Aren't you using a screen protector?? If you are you just need to change the screen protector itself.
If you've scratched the touchscreen itself (as, out of the box it has no protection on it) then I'm afraid it will be a replacement touch screen (fairly cheap)... but you shouldn't replace the whole LCD unit (hideously expensive)!
I bought a secondhand kaiser with protector from the factory on it. But it was old so I decided to take it off and order a new good one. But then i discovered two (minor) scratches. I'm doubting, the new touchscreen is almost cheaper than a good screenprotector, but opening the screen means opening the whole entire phone .
_MsG_ said:
I bought a secondhand kaiser with protector from the factory on it. But it was old so I decided to take it off and order a new good one. But then i discovered two (minor) scratches. I'm doubting, the new touchscreen is almost cheaper than a good screenprotector, but opening the screen means opening the whole entire phone .
Click to expand...
Click to collapse
Well, screenprotectors can be very cheap (and reasonable). - just depends what you're looking for. In my experience it's always been cheaper to buy a good quality screen protector for a different device and guilotine it down to size. Here in the UK, locally, I can get a pack of 5 good quality matt screen protectors (which are better than the shiny ones when you're out on a motorbike in bright sunlight!) for about £5.99 but as they're designed for a digital camera I need to trim about an inch of each one lengthways.
If you do need to replace the touchscreen you will need to open the phone... Can't really help on that one as I've only been playing with the Kaiser for about 12 weeks and have not (unusually for me) cracked it open.
I suspect it will be just as rugged as my original Hermes though!
Whatever you decide - good luck!
Maybe I just put my Whine modus to off and ignore the two scratches that arent visible, only in direct sunlight at a certain angle . I can feel them though with the stylus, but I hope that will be over with a new screenprotector.
I am seriously thinking to buy a martin field screen protector....but i had a couple of questions 1st....
1- Do they enhance screen visibilty in sun ?
2-does dust manage to collect under it ?
3- how does your finger\pen flow over it ?....like its resistance to movement
thnx in advance
darkhalf520 said:
I am seriously thinking to buy a martin field screen protector....but i had a couple of questions 1st....
1- Do they enhance screen visibilty in sun ?
2-does dust manage to collect under it ?
3- how does your finger\pen flow over it ?....like its resistance to movement
thnx in advance
Click to expand...
Click to collapse
1. Nope, but didn't make it worse. The screen was as readable as before.
2. Nope, if you fit it carefully no particles or dust will ever be collected under the screen protector.
3. No change at all. It is the same as before, no hindrance to the touch screen after the screen protector is applied.
thnx ........ ordered it !!
darkhalf520 said:
I am seriously thinking to buy a martin field screen protector....but i had a couple of questions 1st....
1- Do they enhance screen visibilty in sun ?
2-does dust manage to collect under it ?
3- how does your finger\pen flow over it ?....like its resistance to movement
thnx in advance
Click to expand...
Click to collapse
1: No. Didn't change at all.
2: No. In fact its better than before. Without the screenprotector dust was at the edges of the screen all the time - with the screenprotector - nothing.
3: I would say it didn't change. However, since the screenprotector is quite thick (0,2-0,3mm I guess ... ), the handling is much better now. Especially with the HTC flow-applictations the finger flowing at the edges of the screen is much more comfortable now.
And very nice: When applying it on the screen, you can easily pull it off again if you accidentally enclosed dust under it, and wash it. After drying it works as well as before. (Did it about 10 times before I aligned it perfectly onto the screen without any dust sealed in ...
Best screenprotector I ever had
wooow seems really gr8...thnx so much for sharing ur experience
Ordered it.
chalid said:
1: No. Didn't change at all.
2: No. In fact its better than before. Without the screenprotector dust was at the edges of the screen all the time - with the screenprotector - nothing.
3: I would say it didn't change. However, since the screenprotector is quite thick (0,2-0,3mm I guess ... ), the handling is much better now. Especially with the HTC flow-applictations the finger flowing at the edges of the screen is much more comfortable now.
And very nice: When applying it on the screen, you can easily pull it off again if you accidentally enclosed dust under it, and wash it. After drying it works as well as before. (Did it about 10 times before I aligned it perfectly onto the screen without any dust sealed in ...
Best screenprotector I ever had
Click to expand...
Click to collapse
I agree. Have used it for all my phones. First time bought pack of two and never used second one. Since then, only buy singles
Question does the screen fill the gap between the case and the screen so it is better to touch the screen at the edges?
I've got some scratches on my Martin fields protector, from using the stylus!
found I'd got a sharp point on the tip of the styus, still not certain how..
unfortunately I noticed it as it put a scratch up the shield.
bah!
fards said:
I've got some scratches on my Martin fields protector, from using the stylus!
found I'd got a sharp point on the tip of the styus, still not certain how..
unfortunately I noticed it as it put a scratch up the shield.
bah!
Click to expand...
Click to collapse
Got the same issue, but haven't been able to see anything sharp at the end of my stylus...
I got a scratch too, that's why I converted to Brando, because they are cheap and I wouldn't have to fear about scratches on a 2 bucks screen protector.
I've used Protech screen shields for a number of my devices. Been happy with every one and delivery is fast.
Might try the Martin shield just to see how it compares.
cwh
I have to buy a new one, O2 scratched mine when they repaired the crack in the case
just finished installing my new invisible shield on my HD2. during the process of installing the it, phone did seem to get a bit wet so im going to follow the advice to let it dry out for out 12 to 24 hours before turning it back on. the process of applying the shield is different compared to ones i have bought before. now a small package with a sponge is included and instead of a squeegee a installation card is used which i feel works much better to take out the small bubbles after. the shield fits just right covering the screen and a little extra beyond that. if anything i will update once i have let it dry out a bit and report back on how the screen reacts to the shield being on it and the screen sensitivity to touch.
What version did you buy? I have the Maximum Protection coming in the mail. I am just wondering what the difference between Full body and Maximum Protection is.
Not so good
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
I wanted to ask .. does the full Invisible shield of the HD2 ( screen and the back ) better or the just back only ??
I mean does the Invisible shield of the screen will reduce the sensitive of the touch on the screen ??
please because I want to buy it so which one I buy
just back or the both ??
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
I just bought one on ebay
Look at item, 180488642102 (can't post links since I rarely reply on the forum)
Installation was a breeze and much quicker than a zagg and in my opinion a cleaner look. My buddy wanted one, but didn't want to use their screen protector, so I asked if they would just sell the pieces for the housing. They said yes and all you have to do is buy the screen protector, item 170466295030 and put in the order notes that you want the housing pieces only. I would send them a note first.
This should save some $$$ and you could get the housing protector for around $6.
forelli said:
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
Click to expand...
Click to collapse
I believe that is why they have the New Maximum Protection for the T-mobile HD2. I cant confirm until I receive the one I purchased either Monday or Tuesday. According to the description I thought it said that the maximum protection is supposed to cover virtually everything you would wanna protect and is able to be stretched to cover the extra parts.
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
spoogedemon said:
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
Click to expand...
Click to collapse
thank you
so you advise me to buy it better than the normal Protector like in amazon (Premium Crystal Clear LCD Screen Protector for HTC HD2 ) and it is 5 Pack and 5$ ... but the Invisible shield HD2 24$
Go to zagg.com and see the difference between the two.. The invisibleshield material is stuff that they use on helicopter blades. You cannot scratch it... The cheap stuff on ebay will easily be scuffed and eventually tear..
I've seen some reviews on Zagg's stuff and the screen protector is usually too thick and 'grips' your finger as you try to slide on the screen. Don't know if that's still the case but I went with Bodyguardz again since it was decent on my TP2.
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
dtfast1 said:
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
Click to expand...
Click to collapse
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Pic
Is there somebody who can upload a picture of his HD2 with an Invisible shield on it? Especially the corners.
The HD2 screen is already quite scratch resistant, yes?
well been using the invisble shield on my hd2 for the past day or so and i must say, im not sure if its because of the way i applied it or because it just simply made this way but iv have enjoyed having it on. i dont see absoulutly any hazyness as mentioned before, on my screen. the screen still work great just barely have to touch the screen for it to register my touch. yes u can feel the shield on but, depending on wether u have ur fingers clean or dirty does it make a diffrence when ur using it and how it feels when sliding ur fingers on the screen. also i have noticed i clean the screen less often from dirt and the oil from ur hands, so u get to see less finger smudges on the screen to. also ever since i have the protection on i handle the phone a little more loosely and freely when pulling it out of my pocket. one more thing. for those who have a tmobile hd2 which i do. if u have noticed when u look at the screen mostly during the day in sunlight u can see just barely small dots and lines arranged all over the screen. i can tell they were made to be on the screen because there arranged in a specific order kinda like to register commands and i have noticed that i can just barely see them now with the shield on. makes the screen a lil clearer. i would highly recommended it. this isnt my first device i have applyed the shield on but it certanitly is the device i have been most satisfied with it being on because of its look feel and protection. hope this helps u guys decided on wether to get it or not. also as a last note i only have the screen cover on so i cant comment on the full protection or apparently the new "maximum coverage" shield
kcab87 said:
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
I ordered my Maximum Protection on Wednesday and I am hoping to get it on Monday or Tuesday (and I paid for 2 day Air), I am going to most likely only apply the body pieces and not use the screen protection itself since the glass is really durable if you look at this http://www.youtube.com/watch?v=NcEaehKWr2s and I love the sensitivity of my screen and I know on my Mom's Pre and now her Droid eris as well as my brothers Droid eris, the screen is far from as sensitive once you apply the invisible shield. I will however stick with the product because I love there protection and how it gives you a tacky feeling that make me feel allot more secure with my phone in hand. I will also be taking some pictures and possible a quick video of the Invisible Shield on my device after it is applied (I am still debating if I want to pay Best Buy $7 to apply it for me lol)
This shield is perfect!
Hi,
My husband and I use the invisible shield from ZAGG. And not the full body, because it isn't really full. We have to protect and to see from the outside whos device it is. Skins from ZAGG... this is great. Easy to stick it on and it stays perfectly on. No sticky edges or something. I post some photos in this reply. The skins from ZAGG are perfect...
And we can separate the devices and won't take the wrong device to our work. (at 7.00a.m.)
The invisibleSHIELD is easy installed, but you need a lot of patience and a soft piece of fabric (don't know the right word! Doekje in dutch )
And keep your fingers wet! (oops! 1 picture of our cats!!! ) The pictures are made by the HTC HD2 (european version)
alvinmathew88 said:
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
Click to expand...
Click to collapse
+1 for phantomskinz...I have been using them for awhile on all of my phones.
I have tried zagg and BSE as well and I think the phantomskinz have the least amount of "orange peel" effect and I have noticed zero reduced sensitivity from having it on there.
If you check around on sites like www.retailmenot.com...you can usually find some good coupon codes to save even more money.
...still trying to figure out why they give you two complete sets...not that im complaining, but I upgrade so often...I have never used the 2nd skin for any of the phones I have
On the package, they recommend dipping the skin in a bowl of warm soapy water to apply...I have always had better results using a small spray bottle with the warm soapy water to spray the skin, and using a small bowl to just dip my fingers in.
As an application tip...I have learned that applying them in the bathroom after someone has taken a shower dramatically reduced the chance of airborn dust settling on the phone while you are applying them...just remember to use warm soapy water, keep your fingers nice and wet, lots of clean paper towels or a lint free cloth, and a spare phone to use while drying.
Also...the edges that you have to fold over can be tricky to get down if the skin is still wet. After you get the large flat areas secured down...use a hair dryer and blow dry the adhesive side of the skin to dry it out a bit. the heat also makes the skin much more flexable and easier to shape to the contours of the phone.
Cheers
I have used the 'full-body' protection Invisible Shield, and must say that I am not very pleased with it. The salesperson asked for about 40% of the price to help me apply it. And I figured I could do a job as well as some aunty, and so I did !
And found myself looking at Not-So-Invisible-Shield. There're 3 specks of dust that wouldn't come out even after I unpeeled it and used the sponge provided to scrub it. ANYWAY, the IS doesn't seem to change the sensitivity of the screen much, but it certainly does increase the friction, so swpye-ing might feel a little odd. But I am overall pleased with the product and protection.
Hi
Whilst waiting for my watch to be shipped to me , I had a couple of questions that I hoped people would be able to answer;
1. Screen on time - I know in Watchmaker you can change the time that a watch screen stays on, but I've heard that you need to be wary of "burn in" on the OLED screen. Is it OK to increase the default length of time to 10 or 15 secs without having an impact on this? I would like to show off some of my watchfaces and I don't want to be pressing the screen every 5 secs to display it again. I plan to change watch faces every couple of days anyway and use ones that only show hands when the screen goes dark.
2. Screen Protectors - I've seen a few screen protectors on ebay and Amazon but I've also seen tempered glass protectors which are starting to become available via Hong Kong. Have people used these tempered protectors, how do they perform? are the better than the standard screen protectors? or do people not bother with anything?
Your advice would be appreciated.
Thanks
1. this is absolutely OK, it hurts only battery life. You only need to worry about burn-in in the ambient mode (99% of the time) where you want to avoid thick bright lines - I set all my watchfaces to only display digital clock in small thin font in ambient mode. For such short periods, no burn-in can occur (not a few years anyway)
In ambient mode, android wear shifts the whole face a few pixels in different directions every now and then, to with thin lines there's nothing to worry about, but keeping one pixel bright (because it's in the middle of a thick line) is something you absolutely need to avoid.
2) I never use screen protectors - I always buy them, try them and then put them in trash, they just ruin the experience. The only time I regret not having them is after about a year when I scratch it hard with something, but I still consider that a lesser evil compared to a diminished experience with a screen protector. But that you need to decide for yourself.
I have the watch for more than a month and it doesn't have a scratch, and the bezel is quite thick and will protect the watch face. You wouldn't put a screen protector on a luxury watch, would you? Then why would you put it on this?
A whole different situation will be in summer, when most of us will end up on a beach somewhere with a watch on our wrist - don't even think about touching the watch there, not until you have no sand on your hands or clothing.
I used the skinomi screen protector which unlike most protectors is a film that is applied using a liquid spray which is applied before fitting the film.
I find that this means that you get no bubbles or dust. It looks awful at first but over 24 hours it 'straightens out' and looks and works great.
Tempered glass screen protector definately the way to go if you want to go down that route
fade2black101 said:
Tempered glass screen protector definately the way to go if you want to go down that route
Click to expand...
Click to collapse
You have one? How is it working out for you? We've been talking about them in this thread and been wanting to hear from someone who actually has it already.
---------- Post added at 09:04 PM ---------- Previous post was at 08:58 PM ----------
Personally, I'm using the Skinomi skin. I got the full body protection, but only use the face and back. To me, the sides looked awful, so I took them off.
I have been interested in the Tempered glass though. From what I've read for the smartphone Tempered glass protectors, they work well. I'm just wondering how well they do for the "R".
The Skinomi skin has been working out great for me in terms of sensitivity. I had a Zagg skin when I had a Samsung Gear Live and it degraded touch a bit.
ordered mine yesterday, will let you know when it arrives.
Also ordered a tempered glass for my LGR yesterday. Use tempered glass on all my phones and its really great. You don't notice it and the feeling is as you didn't have it, it's also a very good protection and cheep to replace if it got a scratch
I'm also currently using a plastic screen protector - keeps my screen safe but does feel a bit off compared to the naked watch (got used to it long time ago though)
but please keep us updated on the tempered glass ones! thanks
@zvieratko: I don't use screen protectors on my regular watch, but that has sapphire glass and won't scratch (wouldn't buy a regular watch with any other kind of glass for exactly this reason - and a luxury watch has it anyways)
Darnell_Chat_TN said:
You have one? How is it working out for you? We've been talking about them in this thread and been wanting to hear from someone who actually has it already.
---------- Post added at 09:04 PM ---------- Previous post was at 08:58 PM ----------
Personally, I'm using the Skinomi skin. I got the full body protection, but only use the face and back. To me, the sides looked awful, so I took them off.
I have been interested in the Tempered glass though. From what I've read for the smartphone Tempered glass protectors, they work well. I'm just wondering how well they do for the "R".
The Skinomi skin has been working out great for me in terms of sensitivity. I had a Zagg skin when I had a Samsung Gear Live and it degraded touch a bit.
Click to expand...
Click to collapse
Hehe I wish
Don't even have this watch. Currently use a Pebble Steel, and testing out the original G Watch which is also on ebay as I preferred Pebble.
However, I'm very very curious about the battery life on the G Watch R in comparision to the G Watch (where I can't even make a day). I'm curious to know whether the amoled helps dramatically with apps like musicboss on night mode, and also with an always on clockface.
If i can get close to 2 days with my usage, then I'd definately snap this up.
fade2black101 said:
However, I'm very very curious about the battery life on the G Watch R in comparision to the G Watch (where I can't even make a day). I'm curious to know whether the amoled helps dramatically with apps like musicboss on night mode, and also with an always on clockface.
If i can get close to 2 days with my usage, then I'd definately snap this up.
Click to expand...
Click to collapse
if you can't even make a day with the original G Watch, than the LGWR probably won't last you for 2 full days, but one day should still be pretty safe
Alternatively, have a look at Sony's SW3, should do even better than the LGWR battery wise and the new steel model looks nice too imo
I can't give a comparison to the G Watch, but I actually just moved up from the Pebble Steel. I was going to keep the Steel as my "fancy" watch, but recently sold it. Once I moved to the GWR, I couldn't imagine myself using the Steel anymore...
battery life
I have now had my LGR for several days. I use a watch face called Ranger. It is set to 5 and 3 for the ambient setting. Ranger has several useful settings for timing, brightness, colors, line width, etc. I get just about a day. I am sure if I turned ambient mode off I would get a day and a half.
I am looking for a way to extend the time the watch stays on. It goes off pretty quick if you do not do something. 15 sec. Is all I want. I am also sure that will kill battery life too.
bduerr said:
I have now had my LGR for several days. I use a watch face called Ranger. It is set to 5 and 3 for the ambient setting. Ranger has several useful settings for timing, brightness, colors, line width, etc. I get just about a day. I am sure if I turned ambient mode off I would get a day and a half.
I am looking for a way to extend the time the watch stays on. It goes off pretty quick if you do not do something. 15 sec. Is all I want. I am also sure that will kill battery life too.
Click to expand...
Click to collapse
I'm running the G Watch R with IntersectRaven's kernel: http://forum.xda-developers.com/g-watch-r/orig-development/kernel-intersectravens-kernel-t2957728
I'm using the watch with:
- Standard brightness set to 1
- True Dark => https://play.google.com/store/apps/details?id=com.preiss.swapps.truedarkwear
- Watchmaker/Facer with whatever watchface I want (at the moment this one => http://facerepo.com/app/faces/details/green-black-led-compass-14ad0ebbf1c )
- Always on
And I'm getting over a day of usage with heart measurement ratings every 30 minutes. Or when turning those off easily 2 days.
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.
as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one
Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.
sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.