Related
I made some changes to the build.prop and rebooted, and now it gets stuck at the Kindle Fire boot animation. I can't get it to boot into safe mode either. Is there a way to unbrick or restore it without a factory cable? I can't get it to show up with adb.
If there's no way, I could probably make a factory cable, but it would be nice to fix it without having to do that.
FroyoShark said:
I made some changes to the build.prop and rebooted, and now it gets stuck at the Kindle Fire boot animation. I can't get it to boot into safe mode either. Is there a way to unbrick or restore it without a factory cable? I can't get it to show up with adb.
If there's no way, I could probably make a factory cable, but it would be nice to fix it without having to do that.
Click to expand...
Click to collapse
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device.
Power down the device and unplug
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command (or any fastboot cmd as long as you include [-i 0x1949]:
Code:
fastboot -i 0x1949 getvar product
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
onemeila said:
Yes there is a way to get the 8.9 into fastboot so it can you can restore it without a factory cable.
Power down the device and unplug the device.
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command:
Code:
fastboot -i 0x1949 getvar product
Actually any fastboot command works
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
Click to expand...
Click to collapse
Tried that... The command you said just shows the help list, if I do a different fastboot command it says waiting for device and then the Kindle boots normally and gets stuck at boot animation like usual.
FroyoShark said:
Tried that... The command you said just shows the help list, if I do a different fastboot command it says waiting for device and then the Kindle boots normally and gets stuck at boot animation like usual.
Click to expand...
Click to collapse
Are you sure you typed that command correctly because the help menu comes up if a command is entered wrong, I just did it and it worked fine. When you enter a fastboot command for this device it has to have the- [-i 0x1949] after fastboot, that is a zero not an O. If that is not done it will boot normally
ie:
fastboot -i 0x1949 [command]
I've posted the update for the 8.9 restore tool in development section
It could be because I have an older version of fastboot. Any chance you could upload the newest version for me?
FroyoShark said:
It could be because I have an older version of fastboot. Any chance you could upload the newest version for me?
Click to expand...
Click to collapse
Here you go:
https://docs.google.com/folder/d/0B4lZEJI5lYeMdzJobG5jSk9QSEk/edit
If you need to restore the system image though, you should just download the KFHD_SRTool from development section for 8.9 and follow the instructions. It has fastboot included in the tool.
I've done the same thing with my kindle fire hd 7 (7.2.2 rooted, no TWRP), now its just stuck on the boot animation.
adb does not recognize the device. I tried using fastboot, (with the normal usb cable), it gets stuck with the '<waiting for device>' message.
The device manager does show the Kindle, but earlier it used to show 2 devices, a kindle and an adb composite
Were you ultimately able to solve this issue?
rogue07 said:
I've done the same thing with my kindle fire hd 7 (7.2.2 rooted, no TWRP), now its just stuck on the boot animation.
adb does not recognize the device. I tried using fastboot, (with the normal usb cable), it gets stuck with the '<waiting for device>' message.
The device manager does show the Kindle, but earlier it used to show 2 devices, a kindle and an adb composite
Were you ultimately able to solve this issue?
Click to expand...
Click to collapse
Turns out, it was a driver issue. Installed the proper Amazon driver, then it was detected by the adb. From there on, I was able to replace the bad build.prop with my backup
onemeila said:
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device. <snip>
Click to expand...
Click to collapse
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. I suspect results would have been different if I'd had the sense to locate your tool and use it instead. Having downloaded KFHD for v8.1.4, I have tried to get the tool talking with the brick, and see only < waiting for device > eternally. I have charged overnight, held the power button down for >20 sec. to make sure the device was off, then bumped the power button. This should assure that the device is on, but in Amazon's wisdom there are no LEDs to confirm this. Do you have any suggestions for getting the device in a communicative state? I am perfectly willing to open the case. Please forgive the post if this is not the right thread for it, and point me to the right spot if you can.
Same problem: KF 8.9" completely dead
jimbobboy said:
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. .
Click to expand...
Click to collapse
I have exactly the same problem. This KFU-version seems to be a real KF 8.9"-killer.
My device does not respond to anything, regardless what I tried. Connecting to a PC does not trigger any response. The device is not recognized by the PC in any way. I believe that there is no USB-communication at all. I tried a factory-mode cable and this didn't work, too.
Any help would be appreciated, really!
Thanks and regards
Conny
onemeila said:
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device.
Power down the device and unplug
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command (or any fastboot cmd as long as you include [-i 0x1949]:
Code:
fastboot -i 0x1949 getvar product
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
Click to expand...
Click to collapse
OMG, man. You just saved my ass. Thank you SO MUCH for that info. I threw a "thanks" your way for that one. If I had some ebay money in my paypal I would've even donated I'm so happy. Thanks again. you made my day!
jimbobboy said:
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. I suspect results would have been different if I'd had the sense to locate your tool and use it instead. Having downloaded KFHD for v8.1.4, I have tried to get the tool talking with the brick, and see only < waiting for device > eternally. I have charged overnight, held the power button down for >20 sec. to make sure the device was off, then bumped the power button. This should assure that the device is on, but in Amazon's wisdom there are no LEDs to confirm this. Do you have any suggestions for getting the device in a communicative state? I am perfectly willing to open the case. Please forgive the post if this is not the right thread for it, and point me to the right spot if you can.
Click to expand...
Click to collapse
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Another one bites the dust...but hopefully not
Hi guys,
I tried the KFFirstAide tool to root my Fire 8.9, but after it ran, it just wipes red and then goes to the fastboot screen after powering up. I've used the KFHD SRT tool to replaced the system.img file, but still the same thing happens. Is it possibly because I need to restore the boot.img and recovery.img (which KFFirstAide overwrites) as well? And if so, does someone have a clean copy of those that will work with 8.1.4? Thanks!
George
KFHD_SRT
anyone have a working link for KFHD_SRT? i can get into TWRP and into fastboot mode, but simply trying to boot results in a black screen after the blue kindlefire logo
Wait don't do it!
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
I hope you didn't swap motherboards... Like user onemeila stated, you do not need a fastboot cable on the Kindle Fire HD 8.9. Just make sure that before you enter the command "fastboot -i 0x1949 getvar product" that your Kindle is off and plug into the factory cable. Enter the command and wait for the message <wating for device>. Then turn on your kindle and you should boot into fastboot mode. If you see the fastboot screen on your kindle and Jem-PVT-Prod-04 in the command terminal, there is hope. The only problem I encountered is after each command, sometime it won't respond. So you might have to do one command, let it finish it's process. If the next one doesn't work, turn off the kindle enter "fastboot -i 0x1949 getvar product" command. Turn on the kindle and proceed with the next command to restore your kindle.
The way the device is setup, it's very hard to completely ruin the device.
Also read this page for reference by hashcode http://forum.xda-developers.com/showthread.php?t=2128175 and make sure to thank him. He helped me get my device going no problem. The top and bottom of the page should apply to you. If you need additional help let me know.
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
You are pretty much screwed. Sorry to tell you. You've flashed over the bootloader, the problem is with one that doesn't work. So your device won't even boot into fastboot no matter what you do. There was a way to do it on the original KF by removing the back and grounding the usb boot pad, then you could usbboot cmds to install the bootloader. But I'm not sure if it will work or ever been tested on this device. Good Luck, look on the bright side you can turn it into an extremely thin planter box, that still serves no purpose
well
I didnt read everything carefully but succeded in rooting my KHFD 8.9"
then i tried to install FFF using KFU and then it restarted and i couldnt power it on
well i have tried using FireKit .. but it says waiting for OMAP device..
then i wanted to do the shorting trick !!
i have searched for two days and couldnt find any where the how to USB shorting of KHFD 8.9
please help I am getting frustrated..
Sent from my GT-N7100 using xda app-developers app
In total desperation I had opened my KHFD 8.9
But sadly I couldnt do anything to unbrick it
If anybody knows about hardware I can share photos of hardware
And may someone can be able to tell how to unbrick it or do fastboot
Sent from my GT-N7100 using xda app-developers app
onemeila said:
You are pretty much screwed. Sorry to tell you. You've flashed over the bootloader, the problem is with one that doesn't work. So your device won't even boot into fastboot no matter what you do. There was a way to do it on the original KF by removing the back and grounding the usb boot pad, then you could usbboot cmds to install the bootloader. But I'm not sure if it will work or ever been tested on this device. Good Luck, look on the bright side you can turn it into an extremely thin planter box, that still serves no purpose
Click to expand...
Click to collapse
Thanks onemeila - confirmation is good. Unfortunately, this is not a tax deductible education expense... :laugh:
Thanks for your KFHD SRT, by the way - I'm using it nearly weekly.
Andy
Kindle turn of eterny
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
I have the same usse and i don0t know what to do. I made my own factory usb but nothing happens. I don't find the way to fix it... some can help me?
In trying to install a custom bootloader on my Kindle Fire HD 7", I bricked it. When trying to start it normally, it shows "kindle fire" for a few seconds, but then the screen goes black and it becomes totally unresponsive. When I tried booting it with a factory cable, it shows "kindle fire" for a few seconds, and then switches to the "fastboot" logo, but again it is unresponsive. In both cases, my kindle is never found by adb or fastboot or any other utility when connected to my computer. I'm fairly certain this not a driver problem, because my kindle was recognized before, which is how I rooted my kindle. Is there anything else I can try to unbrick my kindle? The main problem is that it is never recognized by my computer. Now what?
What custom bootloader did you try to install?
Sent from my KFHD 8.9 using Tapatalk 2
EEK!!!!
Messing with the bootloader on the kfhd is suicide. You may want to think about calling Amazon and see if they will replace it.
Go into fastboot mode and type this in command prompt wherever you have fastboot.exe and adb.exe (To do that just go to that folder, shift+right click anywhere and select open command window here).
Post the output
Code:
fastboot -i 0x1949 getvar product
and idk if you know this but...if you get your kindle into fastboot mode... all you see is the logo nothing more, and everything else is done through command prompt in windows, So assuming you already know that, what made you think it is unresponsive?
Yeah he is right. Call them, tell them what happened but not how it happened.
Sent from my KFTT using xda app-developers app
AmrBanawan said:
Go into fastboot mode and type this in command prompt wherever you have fastboot.exe and adb.exe (To do that just go to that folder, shift+right click anywhere and select open command window here).
Post the output
Code:
fastboot -i 0x1949 getvar product
and idk if you know this but...if you get your kindle into fastboot mode... all you see is the logo nothing more, and everything else is done through command prompt in windows, So assuming you already know that, what made you think it is unresponsive?
Click to expand...
Click to collapse
The issue is that my kindle is not "discovered", "recognized", or whatever you want to call it by my computer. It has before, because I was able to root my kindle earlier, so I'm fairly certain that it isn't a driver problem, which is the usual response I've found. None of the fastboot commands work because my kindle can't be found.
mharlan95 said:
The issue is that my kindle is not "discovered", "recognized", or whatever you want to call it by my computer. It has before, because I was able to root my kindle earlier, so I'm fairly certain that it isn't a driver problem, which is the usual response I've found. None of the fastboot commands work because my kindle can't be found.
Click to expand...
Click to collapse
Hmmm.. Thats weird what did you exactly do? I would try to reinstall the drivers. When you go into device manager do you see it there when it is plugged in? I had the same problem but my micro usb ports where fried in the Kindle bc I had a faulty fastboot cable.. Let us know if you see it in device manager..
If you tried to install Hashcode's 2nd bootloader, which is the only one that would work, it sounds like you missed a step somewhere. Is that the bootloader you tried to install?
Alright, so it was a driver problem. I ended up removing all drivers and sdk stuff, and then reinstalled and reloaded everything, which enabled fastboot to discover my device when using a factory cable. Problem solved. I found you just have to be careful when setting up sdk, and do every single step as listed on https://developer.amazon.com/sdk/fire/setup.html.
frozen
mharlan95 said:
In trying to install a custom bootloader on my Kindle Fire HD 7", I bricked it. When trying to start it normally, it shows "kindle fire" for a few seconds, but then the screen goes black and it becomes totally unresponsive. When I tried booting it with a factory cable, it shows "kindle fire" for a few seconds, and then switches to the "fastboot" logo, but again it is unresponsive. In both cases, my kindle is never found by adb or fastboot or any other utility when connected to my computer. I'm fairly certain this not a driver problem, because my kindle was recognized before, which is how I rooted my kindle. Is there anything else I can try to unbrick my kindle? The main problem is that it is never recognized by my computer. Now what?
Click to expand...
Click to collapse
I have the exact same problem but found an unusual solution. after 2 months of pain and toil i did something that saved me. When your kindle is frosen on the logo with no animation, you have to restart your computer with your kindle plugged in. I restarted and boom my kindle restarted a few times and booted up. It did not work when i plugged it into usb 3.0 ports, but the usb 2.0 was fine. I just restarted with the kindle plugged in, and it unbricked.
Hope this helps
oliverisboss said:
I have the exact same problem but found an unusual solution. after 2 months of pain and toil i did something that saved me. When your kindle is frosen on the logo with no animation, you have to restart your computer with your kindle plugged in. I restarted and boom my kindle restarted a few times and booted up. It did not work when i plugged it into usb 3.0 ports, but the usb 2.0 was fine. I just restarted with the kindle plugged in, and it unbricked.
Hope this helps
Click to expand...
Click to collapse
Did you hapen to have a facory cable plugged in at the time? and was it the 2013 model?
davethebrave14 said:
Did you hapen to have a facory cable plugged in at the time? and was it the 2013 model?
Click to expand...
Click to collapse
Yes it was a factory cable and no i think i got it in late 2012
Hello, So I'm new to the Android Operating system, a bit of a windows guy, but not so much for linux. I Rooted my Kindle Fire HD, got the apex launcher, chrome...etc... I was removing amazon stuff that i didnt want and I accidentally removed SetupWizard.apk I noticed my navigation bar was gone. Here's were the true stupidity comes in. I Deleted SetupWizard.apk, I then reinstalled SetupWizard.apk from a Galaxy something
Now when i turn on my device, it loads up, says "Setup Wizard has stopped" and contiunes to inform me this everytime I hit ok. Can't change any settings, and the device is not able to be switched into adb mode, but it is recognized as simply a kindle on my PC. Is there any hope?? if i could get to settings im sure i could figure something out.
microsynth said:
Hello, So I'm new to the Android Operating system, a bit of a windows guy, but not so much for linux. I Rooted my Kindle Fire HD, got the apex launcher, chrome...etc... I was removing amazon stuff that i didnt want and I accidentally removed SetupWizard.apk I noticed my navigation bar was gone. Here's were the true stupidity comes in. I Deleted SetupWizard.apk, I then reinstalled SetupWizard.apk from a Galaxy something
Now when i turn on my device, it loads up, says "Setup Wizard has stopped" and contiunes to inform me this everytime I hit ok. Can't change any settings, and the device is not able to be switched into adb mode, but it is recognized as simply a kindle on my PC. Is there any hope?? if i could get to settings im sure i could figure something out.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=36647251
Sent from my KFTT using xda premium
It is not really bricked. Just wait, I will post a copy of setup wizard soon within an hour or two.
Sent from my KFTT using xda app-developers app
microsynth said:
Hello, So I'm new to the Android Operating system, a bit of a windows guy, but not so much for linux. I Rooted my Kindle Fire HD, got the apex launcher, chrome...etc... I was removing amazon stuff that i didnt want and I accidentally removed SetupWizard.apk I noticed my navigation bar was gone. Here's were the true stupidity comes in. I Deleted SetupWizard.apk, I then reinstalled SetupWizard.apk from a Galaxy something
Now when i turn on my device, it loads up, says "Setup Wizard has stopped" and contiunes to inform me this everytime I hit ok. Can't change any settings, and the device is not able to be switched into adb mode, but it is recognized as simply a kindle on my PC. Is there any hope?? if i could get to settings im sure i could figure something out.
Click to expand...
Click to collapse
Do you have a factory cable?
If you don't you can order one from skorpn
or you can make one if you know how to solder
Once you have it, it's easy to deal with your problem
AmrBanawan said:
Do you have a factory cable?
If you don't you can order one from skorpn
or you can make one if you know how to solder
Once you have it, it's easy to deal with your problem
Click to expand...
Click to collapse
That is the cable that came with the device right?
microsynth said:
That is the cable that came with the device right?
Click to expand...
Click to collapse
The factory cable is a little different. But, you may not need one.
Turn your device off and enter the following command:
Code:
fastboot -i 0x1949 getvar product
When you see "waiting for device" turn your KFHD on and that should put it in fastboot mode. In fastboot, you will be able to restore a stock "system.img" and repair your device.
soupmagnet said:
The factory cable is a little different. But, you may not need one.
Turn your device off and enter the following command:
Code:
fastboot -i 0x1949 getvar product
When you see "waiting for device" turn your KFHD on and that should put it in fastboot mode. In fastboot, you will be able to restore a stock "system.img" and repair your device.
Click to expand...
Click to collapse
Will this work without Adb mode, I cannot enable it at the moment
microsynth said:
Will this work without Adb mode, I cannot enable it at the moment
Click to expand...
Click to collapse
Fastboot and ADB are two completely different programs that work in completely different modes. As long as your drivers are in good working order, you should have nothing to worry about.
soupmagnet said:
Fastboot and ADB are two completely different programs that work in completely different modes. As long as your drivers are in good working order, you should have nothing to worry about.
Click to expand...
Click to collapse
Ok, I have the computer at waiting for device, after downloading an image to restore. The Kindle is now black, nothing on the screen. Is it working? or should I try to turn it off and on again
microsynth said:
Ok, I have the computer at waiting for device, after downloading an image to restore. The Kindle is now black, nothing on the screen. Is it working? or should I try to turn it off and on again
Click to expand...
Click to collapse
UMM...Where did you get this image that you restored to the device? What command did you use to flash it into place?
soupmagnet said:
UMM...Where did you get this image that you restored to the device? What command did you use to flash it into place?
Click to expand...
Click to collapse
Im using the software from the link above, In that I used step 3
microsynth said:
Im using the software from the link above, In that I used step 3
Click to expand...
Click to collapse
[Edit:] Never mind that. It's pretty obvious what happened in your case.
I'll quote the creator of the tool you used to restore your Kindle:
prokennexusa said:
WARNING! THIS TOOL CAN PERMANENTLY DAMAGE THE KINDLE IF IT IS NOT USED PROPERLY. DO NOT FLASH THE
KINDLE FIRE 2 IMAGE TO A KINDLE FIRE HD OR FLASH A KINDLE FIRE HD 7" TO A KINDLE FIRE 8.9" DEVICE. THIS
WILL CAUSE PERMANENT DAMAGE THAT CAN NOT BE REVERSED. ONLY FLASH THE CORRECT MODEL SOFTWARE
TO YOUR DEVICE.
Click to expand...
Click to collapse
soupmagnet said:
[Edit:] Never mind that. It's pretty obvious what happened in your case.
I'll quote the creator of the tool you used to restore your Kindle:
Click to expand...
Click to collapse
He has a KFHD 7" and he chose the correct restore option, What makes you say that?!
It is okay, Don't panic.
But you really need a fastboot/factory cable now, Once you have it,
Let us try something a little different, You now have 3 .img files in you backup folder in C:\KFFirstAide\backup, Correct?
Take those files outside the folder now they are in C:\KFFirstAide
Hold down Shift and right click anywhere in the folder
Choose Open command window here
Turn off your device and then connect the fastboot cable, The device should power up and then fastboot logo is displayed
Copy and paste these commands in the command prompt window
fastboot -i 0x1949 flash boot boot.img
Should say
sending...
okay (time)
writing...
okay (time)
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img
AmrBanawan said:
He has a KFHD 7" and he chose the correct restore option, What makes you say that?!
Click to expand...
Click to collapse
I hope you're right...
microsynth said:
Ok, I have the computer at waiting for device, after downloading an image to restore. The Kindle is now black, nothing on the screen. Is it working?
Click to expand...
Click to collapse
...but, I've rarely seen this situation turn out for the better.
It was never actually confirmed what Kindle Fire HD he is using.
I've flashed my system.img dozens of times and I've never seen anything like he's describing. From what I've seen, and considering the system.img was sent, we're looking at two possible scenarios; there was a malfunction in prokenexxusa's software OR user error played a part in the the resulting outcome.
Of the two, it's generally safe to assume the latter.
soupmagnet said:
I hope you're right...
...but, I've rarely seen this situation turn out for the better.
It was never actually confirmed what Kindle Fire HD he is using.
I've flashed my system.img dozens of times and I've never seen anything like he's describing. From what I've seen, and considering the system.img was sent, we're looking at two possible scenarios; there was a malfunction in prokenexxusa's software OR user error played a part in the the resulting outcome.
Of the two, it's generally safe to assume the latter.
Click to expand...
Click to collapse
It is a kindle fire HD 7; 16 GB it was on 7.2.3.
So is it fixed?
Sent from my KFTT using xda premium
Hi,
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
It doesn't show up at all on the device manager with a triangle next to it listed as Tate,jem, otter,or otter 2 does it?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
when i plug my kindle in the pc it does show tate-pvt-08 in device manager and the kindle is stuck in fastboot mode.. any advice?
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
tried the driver but now in device manager the kindle has that yellow triangle and fastboot is stuck on waiting for device
Yellow triangle probably means the driver is still not installed...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Stuck at Fastboot Mode
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
guillemedina11 said:
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
Click to expand...
Click to collapse
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Click to expand...
Click to collapse
Thank you for taking your time to help me out, appreciate it.
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again. Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed. I'm using Kindle Fire First Aide but doesn't seems to work either.
Any toughts? Thank you.
guillemedina11 said:
Thank you for taking your time to help me out, appreciate it.
Click to expand...
Click to collapse
You're welcome
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again.
Click to expand...
Click to collapse
do you see the yellow Kindle Fire boot animation at all?
Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed.
Click to expand...
Click to collapse
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
I'm using Kindle Fire First Aide but doesn't seems to work either.
Click to expand...
Click to collapse
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
LinearEquation said:
guillemedina11 said:
You're welcome
do you see the yellow Kindle Fire boot animation at all?
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
Mr LinearEquation, thank you so much for your advice.
Following a different thread i managed to boot into TWRP by flashing images of "Freedom Boot" and TWRP itself via fastboot commands. Now in theory i can flash a .zip of any ROM but the thing is that i cannot load zips to the Tablet. even though it's recognized now as KINDLE instead of Tate-PVT-08 in the Device Manager, i'm not able to see the kindle as a Pop-up window where you can drag-and-drop files to the Tablet.
The question is: How do i push a ROM via adb as you mentioned in your previous message? Do you know which file do i need and the proper command to push it?
Kindly Regards.
Click to expand...
Click to collapse
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Underurbed said:
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Click to expand...
Click to collapse
Have you looked at this page? http://forum.xda-developers.com/showthread.php?t=2271909 Maybe the unbricked section (part 6 of first page) can help in particular the SRT tool http://forum.xda-developers.com/showthread.php?t=1951254 . I have also noticed if you scroll down to troubleshooting section on the first page of first link it lists your problem and the steps to resolve it
Sent from my Amazon Tate using Tapatalk
Thank you for the reply. Well, my first problem is the kindle doesn't stay on fastboot. It shuts down after a second.
recovery
Hi I locked mine up also and used a program called
Demo Mode Restore. Basically you shut off your kindle and unplug the charge/data cable run the program and click enter once then says plug you kindle in and when it boots the program catches it before it starts up and all you have to do is follow the directions and when it restarts its like when you first took it out of the box
You`ll have to do a search for Demo Mode Restore
Hope this help. God Bless )
joshuafalls63 said:
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
Click to expand...
Click to collapse
I was trying to install twrp on my Kindle using a app from a tutorial. When I reboot to try twrp a red screen shows up so I order a fastboot cable, then i plug the fastboot cable in and get in to fastboot mode. FOR SOME REASON the kindle fire wont show as a fastboot device or a adb device even though i had the drivers.
So I reboot the kindle to see if its the kindle that's making the problem but on reboot the kindle just turns on shows fastboot then shuts off. P.S. windows does not detect anything. PLZ tell me I didnt hard brick my Kindle
Did you root it 1st?
crowncar12 said:
I was trying to install twrp on my Kindle using a app from a tutorial. When I reboot to try twrp a red screen shows up so I order a fastboot cable, then i plug the fastboot cable in and get in to fastboot mode. FOR SOME REASON the kindle fire wont show as a fastboot device or a adb device even though i had the drivers.
So I reboot the kindle to see if its the kindle that's making the problem but on reboot the kindle just turns on shows fastboot then shuts off. P.S. windows does not detect anything. PLZ tell me I didnt hard brick my Kindle
Click to expand...
Click to collapse
You didn't hardbrick it. You missed the stack override before installing TWRP, so it shows you the red screen. You need a fastboot cable.
Sent from my device running CyanogenMod 11
SafinWasi said:
You didn't hardbrick it. You missed the stack override before installing TWRP, so it shows you the red screen. You need a fastboot cable.
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
no it does not show me a red screen and i have a fastboot cable. The kindle turns on says kindle fire then says fastboot after that it shuts off. The pc also does not detect a thing
crowncar12 said:
no it does not show me a red screen and i have a fastboot cable. The kindle turns on says kindle fire then says fastboot after that it shuts off. The pc also does not detect a thing
Click to expand...
Click to collapse
Sounds like a battery or usb issue.
Rushead said:
Sounds like a battery or usb issue.
Click to expand...
Click to collapse
can u help fix it
crowncar12 said:
can u help fix it
Click to expand...
Click to collapse
If it's a hardware issue, you'll have to take it apart & replace the faulty parts.
Rushead said:
If it's a hardware issue, you'll have to take it apart & replace the faulty parts.
Click to expand...
Click to collapse
I know its not a hardware issue
crowncar12 said:
I know its not a hardware issue
Click to expand...
Click to collapse
If it's not a driver issue, then you probably need to charge your battery somehow.